All Categories
This section provides an overview for temperature controllers as well as their applications and principles. Also, please take a look at the list of 151 temperature controller manufacturers and their company rankings. Here are the top-ranked temperature controller companies as of December, 2024: 1.Thermalogic Corporation, 2.DBK USA, Inc., 3.Taco Comfort Solutions.
Table of Contents
Categories Related to Temperature Controllers
A temperature controller is a device that controls temperature by comparing the measured temperature with the set temperature.
It takes in the temperature detected by sensors such as thermocouples and thermistors, compares it with the set temperature, and outputs an electrical signal. The output signal is then used to control heaters and cooling devices to maintain the set temperature. In the home, temperature controllers are used in water heaters and air conditioners, and in industrial applications, they are often used to keep outdoor storage tanks warm.
Temperature controllers are used to regulate and control the temperature of liquids and gases.
In industrial applications, they are often used to control process temperatures. Automatic control using temperature controllers minimizes the use of steam and electricity, contributing to energy conservation.
Also, for use in general household products, temperature regulators are used in water temperature controllers for tropical fish, water heaters, and air-cooling equipment such as air conditioners and refrigerators.
Temperature controllers are mainly used to control heaters and cooling systems by comparing and calculating the measured and set temperatures. For a system whose temperature is to be controlled, the system generally consists of a temperature measurement sensor, temperature controller, and heating/cooling equipment.
The temperature measuring sensor measures the temperature of the object to be controlled. Resistance temperature sensors and thermistors are used. A temperature controller is an electronic device for control. It controls output by feeding back temperature. Air conditioners and heaters are used for heating and cooling equipment. Air conditioners use a compressor to compress refrigerant and can both heat and cool.
There are two types of temperature controller calculation outputs: continuous control and ON-OFF control.
PID control is a control method that calculates input signals using proportional, integral, and derivative (abbreviation of Proportional, Integral, Derivative) elements.
In severe processes where overshoot cannot be tolerated, fine adjustments are made with differential control. Proportional control, integral control, and derivative control are abbreviated as P control, I control, and D control using the initial letters of the alphabet.
ON-OFF control compares the measured temperature with the set temperature and turns the chiller on and off. Compared to continuous control, ON-OFF control is simpler and can be introduced at a lower cost.
Thermostats are simple temperature controllers that have been around for a long time. It uses the expansion and contraction of a metal or liquid due to temperature to control temperature by turning contacts or valves on and off. They are often used to regulate the cooling water to radiators in automobiles and other vehicles, and to control the temperature of electric kettles. Thermostats are available in metal and liquid expansion types.
Temperature controllers control temperatures above ambient (room) temperature by issuing control commands to heaters (heating devices). Temperature controllers have a fixed controllable power capacity, so when a large-capacity heating device is used, a separate drive device such as an electromagnetic switch must be provided.
To control temperatures below ambient (room) temperature, a chiller or other cooling device is used. Temperature controllers, heaters, and chillers must have the appropriate specifications and capacities for the intended use. A temperature sensor is also required for temperature control.
A temperature controller is a type of indicating controller. Indicating controllers control not only temperature but also humidity, flow rate, pressure, and many other factors. Both indicating controllers and temperature controllers are only arithmetic devices, and sensors and chillers are required separately.
*Including some distributors, etc.
Sort by Features
Sort by Area
Thermalogic Corp. is a built-to-order electronic sensor and control manufacturer that was established in 1971. The company is headquartered in a Hudson, Massachusetts facility, where they handle all services in-house. They service various local and international customers in industries, such as medical, military, industrial, food, and transportation. The company’s sensors are used for controlling temperature, humidity, and processes for OEMs (original equipment manufacturers) and volume users. Common products that apply their sensors and controls are HVAC, packaging equipment, food processing, semiconductors, and commercial incubators.
DBK USA, Inc. is an ISO 9001-certified manufacturer and distributor of heating products based in Spartanburg, South Carolina, United States. The company offers positive temperature coefficient (PTC) surface heaters for efficient heating applications, PTC fan heaters for self-regulating heating applications, and PTC air heaters designed for safe heating in high voltage environments. It also offers custom product development and engineering services for unique projects. The company’s products are commonly used in industrial processing and chemical refining operations.
CHINO Works America Inc. (CWA), a wholly owned subsidiary of CHINO Corporation, headquartered in Naperville, Illinois, established in 1983, is a manufacturer of industrial process instruments. The company manufactures sensors, instruments, systems, and control equipment used in the measurement of temperature, moisture, and humidity. The extensive range of instruments includes temperature sensors, recorders, infrared thermometers, controllers, systems, and various accessories. Operating with manufacturing facilities, offices, and agents across the globe, CHINO Corporation supplies its products and services around the globe.
Traceable was established in 1978 and is headquartered in Webster, Texas, US, as a manufacturer and designer of serialized, calibrated, and certified Traceable lab instruments. The product portfolio includes thermometers, barometers, hygrometers, manometers, controllers, timers, clocks, stopwatches, and lab tools. These products find applications in diverse fields, serving purposes such as temperature and atmospheric pressure measurement, humidity monitoring, pressure measurements, process control, timekeeping, and laboratory analysis. These products are utilized across various industries, including healthcare, laboratory, and industrial sectors, as well as in biopharmaceutical industries.
Taco Comfort Solutions, founded in 1920, and headquartered in Cranston, Rhode Island, is a manufacturer of heating, cooling, plumbing, and irrigation products. Catering to residential, commercial, industrial, and institutional markets, offered products include lead-free shut-off flanges for pipe connections, domestic water booster systems enhancing water pressure, ECM circulators for hydronic systems, air-to-water heat pumps for heating and cooling, and commercial air & dirt separators. The company holds significant certifications including ISO 9001:2015 for quality management, Hydraulic Institute's Approved Pump Test Lab certification, and ASME certification for adherence to safety standards in product design and manufacturing.
OMEGA Engineering Inc., founded in Norwalk, CT, in 1962 is a manufacturer of products used to measure temperature and humidity, flow and level, and pressure. The company's product portfolio includes thermocouple probes and assemblies, pressure gauges and switches, and air velocity measurement systems, wireless systems and portable optic sensors. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company also offers customer services that include support, custom research projects and customized services.
Minco Products, Inc. is an American ISO 9001-certified manufacturer of heating and temperature control products founded in 1956 and based in Minneapolis, Minnesota. The company produces various products for heating systems, as well as for temperature or environmental control applications. Its products include humidity sensors, rigid flex circuits, and wire-wound heaters. The company primarily serves clients in the aerospace, energy, and life sciences sectors. It also offers contract manufacturing, product integration, and testing services for customers with unique projects.
Barksdale, established in 1949 and headquartered in Reichelsheim, Germany, is a manufacturer of industrial control and regulator products. The comprehensive product line includes pressure, transducers, switches, temperature, level, and flow controls that offer precise monitoring, efficient regulation, and enhanced operational safety. These products find application in industries such as oil and gas, manufacturing, energy, and transportation. The company's accurate monitoring instruments optimize processes, guarantee operational efficiency, and maintain safety standards, all of which add to the smooth running of complex industrial systems.
Cincinnati Sub-Zero (CSZ), founded in 1940 with headquarters in the USA, is a manufacturer of static environmental testing chambers. The company's products include benchtop, reach-in, walk-in, and drive-in test chambers and industrial freezers. Cincinnati Sub-Zero (CSZ) offers services that include test chamber maintenance programs, upgrades, refrigeration retrofits, calibration, training, replacement parts, and repair across the USA. Their test laboratory is A2LA accredited and provides environmental testing services including temperature, humidity, vibration and shock, thermal shock, HALT and HASS, altitude, drop testing, and corrosion testing.
Russells Technical Products, founded in 1972 with headquarters in India, is a manufacturer of environmental test chambers and systems. The company's product line includes pre-engineered temperature and humidity chambers, thermal shock chambers, dynamometer chambers, environmental rooms, and industrial cryogenic freezers. Russells Technical's test chambers are found in various industries, including defense, automotive, aviation, renewable energy, and biotechnology. Russells Technical Products also provides custom test chamber design, engineering, and production to meet client needs.
Time Mark Corp., founded in 1972 and based in Tulsa, Oklahoma, is a manufacturer of special control devices and related accessories for various industrial applications. The company's product folio includes 3-phase monitors and testers, current monitors, liquid level controls, transformers, and, transducers that have a variety of uses in digital transmission, electronics gadgets, appliances, energy, and, electrical industries. The company also offers a 5-year warranty on 3-Phase Monitors and all other standard products have a 1-year warranty.
TEGAM, established in 1979 and headquartered in Geneva, Ohio, USA, stands as a manufacturer and provider of advanced test and measurement solutions. The company serves industries such as electronics, telecommunications, and aerospace. Its product line encompasses precision measurement tools, temperature and humidity measurement devices, and RF power sensors, addressing the needs of sectors that prioritize precise measurements. TEGAM's quality is evident through its ISO 9001 certification and industry awards. American Association for Laboratory Accreditation (A2LA) has also accredited this company for its specific calibrations listed on Certificate Number 2018.01.
Nordson Corporation, established in 1954 and headquartered in Westlake, Ohio, USA, is a global manufacturer and marketer of differentiated products for precision dispensing and processing. They cater to diverse end markets, including packaging, electronics, medical, energy, and transportation. With over 6,800 employees across more than 35 countries, Nordson offers solutions for bonding, adhesive dispensing, fluid management, test and inspection, and UV curing. Their product line includes dispense tips, syringe barrels, dispensers, srapy valves, fluids, and syringe systems among others. Comprised of eight divisions, they are ISO 9001:2015 certified and provide systems, precision technology, and after market parts.
ThermoElectric Cooling America Corporation, established in 1984 as a spin-off of the Borg-Warner Corporation, is based in Chicago, Illinois, USA, and is a manufacturer of thermoelectric cooling and temperature control products. The company primarily produces cold plates for direct contact cooling or heating devices and components, air conditioners for heating or cooling electronics enclosures, and liquid chillers for cooling liquids in laboratory or process environments. The company also provides custom manufacturing services for its clients in the food and beverage, renewable energy, and industrial automation sectors.
Magneforce Inc. was founded in 1986 and operates in Warren, Ohio, as a designer and manufacturer of induction heating systems and individual components. The company builds all the necessary components for induction heating systems. Their induction heaters are capable of repeatability and control while maintaining a constant output of power regardless of voltage shifts. Their heating coils allow for controlled and steady heating around and inside the desired part. All equipment can be used for brazing, soldering, and melting, among other applications in industrial, medical, and scientific processes. The company also offers no-cost testing and product evaluation of individual parts.
Wine Guardian, established in 1998 and headquartered in North Syracuse, New York, is a manufacturer specializing in wine cellar cooling units and temperature-controlled wine storage solutions. Its product range comprises Through-the-Wall Wine Coolers to meet various storage requirements and Humidifiers dedicated to preserving cork conditions. Additionally, the company provides Remote Interface Controllers, enabling the remote monitoring of wine cellar conditions, while its lineup of wine cellar cooling units includes ducted (self-contained), ducted split, ductless split, and through-the-wall (TTW) systems.
Air Innovations, Inc. established in North Syracuse, NY in 1986 is a manufacturer of environmental control and HVAC control systems. Their product portfolio includes Cleanroom Systems, HEP Air Clean Room HVAC, Wine Guardian, and Desktop Control Consoles that are used for Explosion proof HVAC, Wine Cellar Environmental Control, military HVAC, Aerospace Environmental Control, and Pharmaceutical Temperature & Humidity Control. The company also offers customer services that include technical support, training and customized services.
Backer Hotwatt was established in 1952 and is based in Danvers Massachusetts with offices and subsidiaries across North America, Asia, and Europe. The company is a manufacturer of resistance heating elements to markets including medical devices, semiconductors, photonics, test & measurement devices, and automotive & fuel cells. The company’s standard heating element products include cartridge heaters, sun rod heaters, ceramic heaters, and strip heaters. The company also sells temperature and voltage-controlling devices and accessories such as terminal covers, insulating beads, and various sleeving.
Gamer Process was founded in 1962 and is headquartered in Houston, Texas. The ISO 9001 registered company is an electric heater manufacturer, providing engineering, design, and manufacturing of heating equipment and systems including control panels, liquid fuel conditioning, pumping, and other engineered systems for industrial, paper, marine, aeronautics, and defense industries. Some of the company’s heating solutions include indirect electric heaters, duct heaters, and process immersion heaters. The company’s non-heating solutions include pressure reduction stations, fuel gas scrubbers, and ammonia unloading stations.
International Crystal Laboratories, ICL, was founded in 1962 and is based in Garfield, New Jersey. ICL serves the spectroscopy, applied spectroscopy, and analytical chemistry industries and end users. ICL’s product categories include transmission windows & optics, FTIR calibration films, sample cards, powders, cuttings, IR, UV, optical spectroscopy sampling, laboratory presses, die sets, laboratory supplies, and spectro-optic lab supplies. Examples of ICL’s products include circular disks, magneto crystals, crystal cuttings for grinding, Gemini FTIR gas analysis cells, liquids, and solids, polishing kits, and laboratory grinding mills.
Devar Inc. is headquartered in Bridgeport, Connecticut. Devar Inc. is a designer and manufacturer of industrial control and measurement devices for several industries including electromechanical manufacturing. Devar products are made in the United States and its factories are ISO 9001:2015 certified. Devar’s product categories include level and pressure including transducers and transmitters, pump controllers, loop powered indicators, signal isolators and converters including AC current transmitters and isolated signal conditioners, panel meters, alarms, and temperature transmitters.
American Products Inc. was founded in 1983 and is located in York, Pennsylvania. The company is a designer and contract manufacturer of custom electronics for the transportation, construction, medical, architectural, and energy management industries. The company’s two primary services are product development and contract manufacturing. Product development customers are typically experts in fields other than electronics who have a design or need for a design and a supplier to make the design work. As an ISO 9001-2015 certified contract manufacturer, the company provides PCB assembly via surface mount technology as well as other cable manufacturing services.
Cress Mfg. Co. (CMC) is a manufacturer of ceramic and glass kilns as well as electric furnaces that was founded in 1973. Based in Carson City, Nevada, the company produces various top-loading and front-loading kilns for firing ceramics or manipulating glass, industrial furnaces used for hardening steel, ventilation systems, and pyrometers for real-time temperature monitoring. CMC products have applications in the aerospace industry, machine shops, laboratory research, jewelry, pottery/glassware production. It also offers after-sales services including technical support and parts replacement.
Thermal Care, Inc., established in 1969, is an ISO 9001-certified industrial water chiller and process cooling equipment manufacturer in Niles, Illinois. The company ships worldwide, and has domestic and worldwide sales offices in Canada, Mexico, Central, and South America. Its product lineup includes cooling towers, portable chillers, reservoirs, and temperature controllers. Further, Thermal Care produces standardized and customized cooling systems for a vast range of industries, from food and dairy, to aviation, medical, and industrial.
Heat Exchange and Transfer, Inc. was founded in 1968 and is headquartered in Carnegie, Pennsylvania. The company is a designer and manufacturer of custom, made-to-order heat transfer systems, serving industries such as aerospace, automotive, textiles, pharmaceuticals, and packaging. The company’s two product divisions are Direct Heating and Indirect Heating of Process Equipment. Direct Heating includes open coil heaters, flanged immersion heaters, unitary storage tank heaters, and stand-alone circulation heaters. Indirect Heating of Process Equipment includes extruders, mixers, ovens, dryers, and other equipment and machinery.
Sigma Thermal is based in Marietta, Georgia, and designs, engineers, supplies, and services process heating systems. The company serves multiple industries including gas processing, petrochemical, power generation, aerospace, and several others including agriculture. The company’s product lines include waste heat recovery, thermal fluid systems, biomass energy systems, electric process heaters, and various automation solutions. The company also provides aftermarket support including maintenance, retrofitting, upgrades, OEM replacement, and repairs to extend the operational life of components, machines, and systems.
Wisconsin Oven Corporation has operated since 1973 and is located in East Troy, Wisconsin. Wisconsin Oven designs, engineers, and manufactures industrial ovens and other heating equipment for numerous applications including heat treating, powder coating, paper pulp drying, finishing, drying, and curing in the aerospace, automotive, composite, energy, finishing, foundry, heat treating, annealing, military, and pharmaceutical industries. Types of ovens and equipment include custom and standard batch ovens, conveyor ovens, pollution control equipment, and walk-in ovens.
Despatch is a manufacturer of industrial ovens and other thermal products that was established in 1902 and acquired by ITW EAE, a division of Illinois Tool Works, Inc., in 2011. Based in Minneapolis, Minnesota, the company produces benchtop and laboratory ovens, industrial cabinet ovens and furnaces, truck-in ovens, and conveyor ovens. It also offers thermal and catalytic oxidizers for managing pollutants, spare parts, and accessories such as timers or sensors. Despatch primarily serves clients in the healthcare, electronics, transportation, and material handling sectors.
Tempco is based in Wood Dale, Illinois and has been in business since 1972. Tempco is a manufacturer of many types of heating elements and thermocouples with design variations. Tempco is ISO 9001:2015 certified. Temco’s electric heaters and elements include band heaters, cartridge heaters, cast-in heaters, ceramic fiber heaters, coil and cable heaters, drum heaters, enclosure heaters, flexible heaters, heat trace cable, heated hose and tubing, infrared heaters, process heaters, shroud systems, strip heaters, tank heaters, and tubular heaters. Tempco also sells various application accessories and wiring accessories.
Selco Products was founded in 1958 and is headquartered in Reno, Nevada. The ISO 9001:2008-certified company is a global manufacturer of customized electronic components. The company serves several markets including medical, HVAC, electronics, and aerospace OEMs and end-user companies, leveraging JIT delivery, Kansan, and engineering support. Electronics offerings include thermistors, temperature controls, panel instruments, and signal converters. Non-electronics include buttons, knobs, and other accessories used in digital and analog electronics controls.
OMEGA Engineering was originally begun in 1962 as a manufacturer of thermocouples and has grown to over 100,000 products for measurement and control of temperature, humidity, pressure, strain force, flow, level pH, and conductivity as well as customer service including data acquisition, electric heating, and custom-engineered products. Additionally, OMEGA offers tools to serve as reference for engineers around the world. OMEGA Engineering serves the aerospace, automotive, wireless, sanitary, test & measurement, process control, power monitoring, environmental, and laboratory markets.
Watlow Electric Manufacturing Co. was established in 1922 and is headquartered in St. Louis, Missouri as a manufacturer and designer of heating solutions. Their product portfolio includes electric resistive heaters, temperature sensors, temperature and power controllers, and supporting software. The industrial technology and thermal products offered by the company are crucial components in optimising thermal performance, decreasing design time, and improving the efficiency of products and applications. The company's sales offices span 16 countries, serving diverse industries like semiconductor processing, energy processes, environmental chambers, diesel emissions, and foodservice equipment, among others.
Vere, Inc., established in 1987 with headquarters in the USA, is a manufacturer of instruments and accessories for optical laboratories. The company's product line includes honeycomb breadboards, photodiode amplifiers, ratiometers, laser diode drivers, and thermoelectric cooler drivers. Vere’s products are used by educational, industrial, and government institutions for research and development in optical systems. The company also provides a customization service that includes custom electro-optical design and production of instruments and accessories to meet client-specific requirements.
Advanced Energy Industries, Inc., founded in 1981 and based in Denver, Colorado, is a manufacturer, distributor, and supplier of precision power conversion, measurement, and control solutions. Its products, include AC-DC power supply units, DC-DC conversion products, and high voltage amplifiers, which are used in mission-critical applications across various industries such as healthcare, telecommunications, and industrial equipment. The company offers on-site support, capable of securing and mounting products, managing electrical connections, and conducting tests as per specifications.
Clark Solutions, established in 1962 and headquartered in Massachusetts, United States, is a supplier and distributor of fluid handling products. The company offers a wide range of products, including pumps, valves, and instruments, among others, serving industries such as chemical processing, pharmaceuticals, and food and beverage. These industries rely on the company's solutions for precise fluid control in tasks like transferring, mixing, and flow control, ensuring the accuracy and efficiency of operations.
Allied Electronics Inc., founded in 1991 with headquarters in the USA, is a distributor and supplier of fuel and vehicle servicing station equipment and accessories. The company's extensive product line of over 57,000 products includes forecourt controller parts, fuel dispenser parts, air compressors, and power conditioners. The company also provides rebuilt parts by brands that include Bennett, Daktronics, FE-Petro, and Gasboy. The company's services include equipment financing, primarily serving the retail petroleum industry, including car wash and price sign manufacturers.
Dynisco, founded in 1965 and headquartered in West Chester, Pennsylvania, is a manufacturer and supplier of flow control products. The company’s product range entails flow meters, flow controllers, flow switches, flow sensors, and flow conditioners. It caters to diverse industries, including oil and gas, chemical, pharmaceutical, food and beverage, water treatment, and power. Offering design, engineering, certification, supply chain management, and technical support services, the company is devoted to delivering inventive and dependable flow control solutions. With ISO 9001:2015 certification, the company adheres to rigorous quality standards.
STEGO, Inc. is a North American distributor of thermal management solutions for electronic components that was established in 1980 as a subsidiary of the German company STEGO Elektrotechnik GmbH. Based in Kennesaw, Georgia, the company's product inventory includes various branded heaters, fans, thermostats, and sensors. It also stocks cabinet and enclosure lights, ventilation and drainage devices, electrical receptacles, and mounting aids. STEGO, Inc. primarily serves clients in the industrial automation, telecommunications, medical technology, and transportation sectors.
Veris Industries, established in 1992 and based in Tualatin, Oregon, is a manufacturer and distributor of environmental sensing and power monitoring instruments used in commercial HVAC, smart buildings, renewable energy, industrial control, and energy management applications. The company’s power monitoring portfolio comprises of power meters, power metering CTs, current switches, current transducers, and current monitor relays for monitoring, regulating, and reducing energy use. Veris's environmental sensing instruments include pressure sensors, temperature sensors, humidity sensors, water & leak detectors, and smoke detectors used in commercial and residential building automation systems. The company operates under ISO 9001 and ISO 14001 quality standards.
Applebee-Church, Inc., established in 1957, operates as a distributor and manufacturer's representative specializing in electrical heating systems. The company is headquarted in Peach Tree Corners, Georgia with branch offices in the states of Florida, Alabama, and South Carolina. The company offers products and services such as electric heater systems, industrial heating systems, electric comfort heat, and power temperature controls. These solutions cater to needs of both the industrial and commercial heating and control sectors.
Polytech Filtration Systems Inc., founded in 1967 and headquartered in Hudson, MA, United States, is a manufacturer of industrial filtration systems. The company's products include conventional vacuum filters, portable coolant filters, and drag-out conveyor filtration systems. These products are used for surface grinding, boring, and machining centers. Its products are custom-manufactured to order and to meet client requirements. It serves various industries, including steel works, consumer product manufacturing, and automotive services.
PLC Hardware (PLCH) was founded in 1993 and operates out of Owings Mills, Maryland. PLCH is an independent distributor of used and surplus industrial automation and networking equipment. PLCH offers a 1-year warranty on all products and ships globally. PLCH’s emphasis is on hardware and distributes hardware from such brands as Cisco, HP Networking, Rockwell Automation and Siemens. A few of the many categories of hardware include application networking products, cables, optical networking systems, routers, switches, rack servers, content delivery devices, as well as HVAC controllers, and safety integrated systems.
Precision Instrumentation was founded in 1982 and located in Chino, California. Precision Instrumentation is a distributor of dryers, valves, switches, and other measurement and control products. Product categories include pressure, flow, filters & separators, and controls. The pressure segment includes brass and stainless steel single and dual stage regulators, snubbers, diaphragm seals, and pressure switches. Flow includes rotameters, mass flow meters, controllers, mag meters, ultrasound, and others. Filters & separators include dryers, high flow, low flow, and high and low pressure streams. Valves include valves, switches, displays, controllers, and HMI devices.
Elite Restaurant Equipment was founded in 2013 and headquartered in Newark, New Jersey. Elite Restaurant Equipment is a distributor of restaurant equipment and supplies. Refrigeration equipment includes reach in refrigerators, refrigerated prep tables, refrigerated display cases, merchandising refrigerators, and undercounter refrigerators. Commercial work tables include stainless steel work tables, butcher block work tables, and equipment stands. Commercial sinks include 1-3 compartment sinks, underbar sinks, and faucets. Some additional offerings include various shelves and shelving, exhaust hoods, fryers and ranges, steam tables, chairs, booths, and other restaurant furniture.
Metafin Supply company was founded in the 1980s and is headquartered in Volo, Illinois, and is a distributor of metal finishing and electroplating equipment and supplies for the surface finishing industry. Metafin Supply offers a range of machines and parts. Machine listings include pumps, filtration systems, centrifugal dryers, and heaters. Parts and components include cartridges, individual chemicals, tank magnets, and dipping baskets. Items or parts not present on the website may be available upon request by email or phone.
Sterling Sterlco was founded in 1916 and distributes under M&M Control Service, Inc. is a specialist in industrial control units. Industrial control units are in two basic varieties: steam control family and temperature control units. Steam Control units include steam traps, Y strainers, temperature control valves, hand radiator valves, boiler feed pumps, condensate pumps, and centrifugal pumps. Temperature control units include portable chillers, central chillers, and water and oil temperature control units. Additionally, Sterling also manufactures pump tanks.
Pelonis Technologies, Inc. was founded in the 1990s in Exton, Pennsylvania. Pelonis technologies is a manufacturer and distributor of air movement technologies and specialty heating products for commercial and industrial use. Pelonis Technologies is ISO 9000 and ISO 14000 certified. Pelonis Technologies has 3 main standard product segments in cooling, heating, and motors & motion control. Cooling products include fans, blowers, micro cooling, and automotive fans & blowers. Heating products include PTC heaters, temperature controllers, and immersion heaters. Motors & motion control include micro, planetary, AC, and medical micro motors. Custom solutions include AC and DC fans and blowers.
Newport is a division of MKS Instruments, Inc. that was incorporated in 1961 and headquartered in Andover, Massachusetts. The company is a manufacturing company that serves the specialty industrial, advanced electronics, and semiconductor industries. The company markets its products through Spectra-Physics, MKS Instruments, Richardson Grating, and other brands. Their product categories include motion, optomechanics, optics, and vacuum instruments. Product categories include lasers, MKS vacuum & gas solutions, laser diode controls, and tables & isolation systems.
Addison Electric originally opened its doors in 1980 and is headquartered in Addison, Illinois. Addison Electric provides systems integration, distribution, and service for industrial tools and equipment. Product lines include motors & gears, drives, controllers, sensors, devices, fuses, blocks, holders, low voltage control products, and thermal management. Service options include electrical and motor services such as PLC programming and clutch and brake repair, as well as dyne load testing and drive and motor dyne testing.
Wavelength Electronics is a manufacturing company that specializes in laser control technology, founded in 1993, the company is based in Bozeman, Montana. The company offers a range of products, including laser diode drivers, quantum cascade laser drivers, temperature controllers, instruments, and accessories. Their products are used in many applications, including biomedical, life sciences, remote sensing, military, aerospace and more. Their knowledgeable applications engineers are always available to provide guidance and assistance to customers.
Thermotron, founded in Holland, Michigan, in 1962 is a supplier of environmental test equipment. The company's product portfolio includes environmental test chambers, vibration test systems, combined environment test facilities, environmental stress screening systems, and functional test & measurement systems. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. They provide services including system start-up and on-site training, equipment repair, instrumentation system upgrades, preventive maintenance, and warranty.
ARCO Engineering was founded in Louisville, Kentucky in 1954. ARCO Engineering, Inc. is a distributor of Pressure, Temperature and Liquid Level instruments, instrument valves, heat trace, comfort heaters, and safety relief valves. ARCO Engineering specializes in products for the natural gas, process, chemical, power, wastewater and OEM markets. ARCO Engineering offers many types of parts including calibration instruments, hand valves, thermocouples, digital meters, drive pressure gauges, respirators, jet pumps, and pressure relief valves.
AMK Plastics was established in 2018 in Miami, Florida. AMK is a supplier of machines, materials, and knowledge-based services for the global plastic industry, handling both small and large products. The company’s product lineup includes large equipment such as extruders and chillers, smaller machines such as labeling machines, supplies, and raw materials. The company also offers auxiliary equipment, spare parts, and technical support. Raw materials and basic plastic products include bio-additives, master batch plastics, plastic caps, and plastic bottles.and
West Control Solutions, established in 1994 and based in Brighton, East Sussex, is a manufacturer and supplier of products for process control and automation. The company's product range includes Single Loop Controllers, Multi-loop Controllers, Limit Controllers, Process Indicators, Recorders, and Transmitters. These products play a pivotal role in ensuring precision and efficiency in automation machinery manufacturing. Serving industries such as customized controller solutions and distributed I/O networks. The company specializes in Temperature Controllers, Thyristors and solid state relays, Controllers with integrated data logging, and Limit controllers.
The Azbil Corporation (formerly the Yamatak Corporation) aims to realize safety, comfort, and fulfillment in people's lives and contribute to global environmental preservation through "human-centered" automation. They provide their customers with timely solutions via an integrated structure that extends from planning and development to maintenance and service, capable of responding rapidly to customer needs.
Micro Sensor is a Baoji, Shaanxi, China-based manufacturer of OEM, ODM, and custom-designed transmitters, flowmeters, and sensors used for industrial automation, established in 1993. The production line has level, temperature, and pressure transmitters, pressure sensors, flowmeters, and accessories, including valves, indicators, protectors, and connection boxes for pressure sensors and transmitters used in the HVAC, marine, water, oil, and gas industries. The company has a subsidiary, Micro Sensor GmbH, based in Essen, German.
Hammond Manufacturing, established in 1917 and headquartered in Guelph, Ontario, is a manufacturer that specializes in electrical and electronic enclosures, cabinets, racks, and outlet strips. The company offers a wide range of products, including small enclosures, rack cabinets, and power distribution and surge protection for electronic devices. It also provides die-cast aluminum enclosures, watertight enclosures, and plastic enclosures. Its enclosures are designed to protect and house electrical and electronic components. The company has achieved ISO 9001 Certification and RoHS Compliance. It serves a wide range of industries, including automotive, mining, petrochemical, packaging, and government.
Stäubli began in Horgen, Switzerland in 1892. Stäubli designs, produces, distributes, and provides support for products for numerous industries including aerospace, alternative fuels, medical devices, packaging, photovoltaics, and semiconductors. Stäubli has 4 primary product lines including electrical connectors, fluid connectors, robotics, and textile. Electrical connector products include cable couplers, modular connectors, and test and measurement connectors. Fluid connectors include mold clamping systems, quick and dry disconnect couplings, and safety breakaway couplings. Robotics include industrial robots, collaborative robots, and mobile robots. Textile includes weaving preparation and frame weaving.
Kawai Corporation, established in 1929 and based in Japan, is a manufacturer and supplier of specialized heaters. The company's product range includes Cartridge heaters, Silicone rubber heaters, Pipe heaters, Hose heaters, and Tube heaters. These heaters are used in various applications, from maintaining temperature consistency to ensuring process efficiency. It serves industries such as Medical, Semiconductors, Food, and Automotive. The company offers a suite of services, including thermal analysis service, testing services, The heater doctors, and Kawai's Workflow.
Simex Sp.z.o.o, established in 1986, and based in Poland, Europe, is a manufacturer and supplier of industrial automation equipment. Their product portfolio includes indicators, controllers, counters, inclinometers, sensors, electric heaters, converters, temperature transmitters, and power supplies. The company has ISO-certified products. The company offers the latest developmental features with microprocessors, SMT technology, automation, process control, machine building, and user-friendly programming which is ideal for industrial process control. The products are used in industrial machinery applications.
Meba Electric Co.,Ltd is a Chinese manufacturer of low-voltage electrical equipment that was established in Yueqing City, Zhejiang Province in 2006. The company produces various relays such as electronic and thermal overload relays, circuit breakers, AC contactors, and AC drivers. It also offers human machine interfaces (HMIs) such as MT4000/6000/8000 series touch panels, as well as programmable logic controller (PLC) and expansion modules. The company’s products are used mainly by clients in the construction, aerospace, energy, and petrochemical industries.
Labfacility, based in the UK, is a manufacturer and supplier of temperature sensors, thermocouples, and related instrumentation for industrial applications. Established in 1971, the company offers a wide range of products that cater to various industries, including aerospace, automotive, food processing, pharmaceuticals, and more. Their product line includes thermocouples, resistance temperature detectors (RTDs), thermistors, temperature transmitters, temperature controllers, and temperature calibration equipment. As a supplier, Labfacility serves customers worldwide, ensuring that they meet stringent requirements and standards of various industries. Labfacility is ISO9001:2015 certified.
Chino, headquartered in Tokyo, Japan, is engaged in the manufacture and sale of measurement and control equipment and instrumentation work. The company was founded in 1936 as Chino Seisakusho. Chino operates in the area of "measurement, control, and monitoring" and contributes to the development of all industrial fields. Major products include recorders, regulators, temperature sensors, data loggers, radiation thermometers, thermal image measuring devices/thermal cameras, composition meters, moisture meters, thickness meters, thyristor regulators, and fuel cell evaluation and testing devices.
Enercorp Instruments, Ltd was born in 1977 and operates out of Brampton, Ontario. Enercorp is a manufacturer of measuring equipment used in markets such as HVAC, industrial monitoring, food processing, waste management, pharmaceutical, lumber, and agriculture. Enercorp produces sensors and components in six categories: temperature, including temperature sensor plates and temperature probes, current such as core current switches and current indicators, Aqua-Boy & curing such as moisture meters and needle electrode heads, pressure such as pressure transducers and pressure transmitters, wind such as ultrasonic anemometers, and binding post, such as lead-through bolts.
Hotset GmbH, established in 1973 and headquartered in Lüdenscheid, Nordrhein-Westfalen, Germany, is a manufacturer and distributor of thermal engineering products. The company offers thermosensors, temperature control systems, electric coil heaters, hot runner nozzle heating elements, tubular heating elements, and flexible custom temperature control systems. Its products cater to various sectors including plastics processing, tool making, food, and medical technology. Certified under DIN EN ISO 9001:2015, the company also holds UL, CSA, and VDE certifications, ensuring quality and compliance in its product lines.
Advantage Engineering, Inc. is a manufacturer of industrial heat transfer products, established in 1977, and is headquartered in Greenwood, Indiana, USA. Their products include water chillers, temperature control units, and evaporative cooling towers, which provide energy-efficient process cooling, and reduce manufacturing time by controlling the temperature of equipment, materials, or the environment in industrial processes. Their facility in Indiana consists of a campus of three manufacturing buildings and one warehouse with over 100,000 square feet under the roof, annually producing more than 1,200 portable chillers, 120 central chillers, and 3,500 temperature control units.
MPI was founded in 1999 and is based in Toronto, Ontario. MPI is a designer, engineer, and manufacturer for heaters, sensors, controllers, relays, and other related products. MPI’s product categories include cartridge heaters, band heaters, strip heaters, coil & cable heaters, melt pressure products, drum heaters, heated hose, heater accessories, tubular heaters, immersion/process heaters, silicone/flexible heaters, thermocouples, RTDs, temperature controllers, linear transducers, cast-in heaters, mercury contractor relays, Watlow thermocouples/RTDs, and other products including various controllers and accessories.
Trinity Electronics Systems Ltd. was founded in the 1980s and is based in Edmonton, Alberta. Trinity Electronics Systems designs and manufactures custom electronics and handles modifications, upgrades, and warranty repair as well. Trinity Electronics Systems product list includes power measurement products, audio products, lighting products, industrial electronics, sensors, and miscellaneous products. Trinity Electronics Systems services begin with product development and create proposals for complete products including packaging, instruction manual, software, and prototyping. Electronic design services including retrofitting and even re-manufacturing of boards created by defunct manufacturers. Other services include PCB, Hazloc, and microprocessor software development and contract manufacturing.
Saginomiya Seisakusho, Inc., founded in 1926 in Japan, is a manufacturer and supplier of advanced control equipment and systems. The company's diverse product portfolio includes pressure switches, temperature controllers, sensors, and actuators, serving various industries like HVAC, refrigeration, and automotive. Saginomiya's pressure switches are crucial components in controlling fluid pressure, ensuring safety and efficiency in industrial processes. Courtesy of its technological advancement, Saginomiya aims to provide cutting-edge solutions that enhance the performance and reliability of its clients' systems and equipment
Gefran is an Italian manufacturer of industrial process automation systems that was founded in Provaglio d'Iseo, Brescia in 1960. The company produces regulatory drives and inverters, various sensors, and automation components such as programmers and controllers. It also offers tailor made systems for specific industrial processes, including thermoforming, injection molding, and extrusion. Gefran products are primarily used in factory automation, as well as by clients in the metalworking, plastics, material handling, and food processing sectors.
Lumen was founded in 1953 and is headquartered in Zielona Góra, Poland. The company is a manufacturer of industrial automation devices including transducers, network parameter analyzers, and analogy meters, primarily serving water & gas utilities, solar energy production, electronics, and manufacturing. The company’s product categories consist of network parameter meters and analyzers, digital and analog meters, current transformers, and shunts. The company offers customers OEM, EMS, and ODM services in the scope of housing, designing, electronics, mechanics, hardware, and software.
DITEL has been a manufacturer and supplier of Led Visualization Solutions since 1984 having its offices in Spain. The company deals in Digital Panel Instrumentation for monitoring and control of industrial processes from any sensor like dashboard indicators, PID regulators, cam switches, level sensors, large alphanumeric, graphic, and number format displays, and many other devices to facilitate communication in large service corporations such as Logistics, Hospitals, Public Administrations, Parking, Financial services, etc.
Camille Bauer Metrawatt was established in 1900 headquartered in Wohlen, Switzerland and it is a manufacturer of measuring instruments. The company specializes in the manufacture of angle of rotation and process measurement instruments. It offers a comprehensive array of services including measurement and display, position sensors, monitoring and control, software, and systems. Additionally, the company provides testing technology and medical technology solutions. This company also produces current sensors/clamps, power converters, and current links. The company is affiliated with various memberships and working groups such as Cenelec, Swissmem, and Swissmig.
The Kübler Group was founded in 1960, headquartered in Germany, and operating in 50 countries worldwide. The company is ISO 9001 certified and develops, produces, and distributes products & solutions for measurement, transmission, and evaluation purposes for heavy industry, bottling plants, alternative energy, and mobile automation. The company’s measurement products include data encoders, measurement systems, and inclinometers for measuring angles. Transmission products include slip rings, signal converters, and connectors. Evaluation products include process devices, displays and counters, and speed monitors.
Cognito Quam Electrotechnologies Ltd was established in 1990 as a manufacturer and supplier of industrial electronics and is based in Greece. The company excels in providing process control and automation systems, as well as robotics and motion control technology and the extensive product range includes power electronics, test and measurement tools, signal interfacing, and conversion devices. The power electronics are for the management and utilization of all energy resources as the Mistral ventilation control addresses the needs of the catering and food preparation environment, the humidity/moisture sensors measure humidity whereas the elevation lift control system processes the lift operation.
Shinko Technos Co., Ltd., established in 1945 and headquartered in Osaka, Japan, is a manufacturer of industrial measuring instruments tailored for temperature and humidity applications. The company has a comprehensive product catalog that comprises an array of instruments, including output devices like SSR power controllers, portable indicators, communication converters, recorders, and temperature and programmable controllers. These precise measuring instruments find application in a diverse range of industries, spanning from plastics and rubber manufacturing to food and packaging, environmental and energy production, as well as textiles and ceramics.
The Sauermann Group was established in 1976 and is headquartered in Montpellier, France as the designers, manufacturers, and suppliers of industrial and HVACR-related products and solutions. The company provides comprehensive solutions for measuring, monitoring, and controlling indoor air quality (IAQ) and HVACR (Heating, Ventilation, Air Conditioning, and Refrigeration) systems. The line of products includes condensate pumps, air quality sensors, leak detectors, manifold gauges, and other related instrumentation and accessories. These products are designed to improve IAQ, prevent condensate overflow, detect leaks, and optimize the performance of HVACR systems in various residential, commercial, and industrial applications.
Panasonic Industry Europe is the European branch of Panasonic, a global manufacturer of electronics and houseware, originally founded in 1918. Panasonic Industry Europe manufactures in 4 categories: components, devices, energy & building, and automation devices & solutions. Components include relays, capacitors, resistors, sensors, switches, connectors, couplers. Devices include wireless connectivity, e-bike systems, motors, compressors, thermal solutions, GPS antennas, as well as electronic materials. Energy & building includes batteries, fuel cells, solar sells, power tools, and home IoT. Automation devices & solutions include sensors for factory automation, industrial motors, laser welding, and more.
Premosys GmbH, established in 2000 and headquartered in Kalenborn-Scheuern, Germany, is a manufacturer of optoelectronic systems for industrial color detection and color measurement. Its product line includes inline color measurement systems, LED analyzers, color and spectral sensors, electronic assemblies, and related accessories. These are utilized in industrial production and quality assurance processes. Its offerings cover single to multi-sensor measurement systems, catering to various optical variables. The company has received the Wirtschaftsmagnet award and has earned a place in the Technology Council of Rhineland-Palatinate.
TOHO ELECTRONICS INC., established in 1963 and headquartered in Kanagawa, Japan, is a manufacturer, designer, and supplier of temperature controllers, sensors, and probe cards for semiconductor testing systems. The company offers a diverse range of products, including the digital controller series, dual-channel controllers, and paperless recorders. These products are utilized for displaying measured data on a liquid crystal display, acting as a communication master to record data values on the slave side, and for washing semiconductors and printed circuit boards.
Ohkura Electric Co., Ltd. was established in 1933 and is headquartered in Tokyo, Japan. The company is a manufacturer and designer of measuring and flow control products for industries such as power generation, manufacturing, and semiconductors. The company has three product groups: Industrial Instruments Group, Telemetering & Control Group, and Semiconductor Equipment Group. The Industrial Instruments Group’s products include systems equipment, pressure transmitters, electrometers, and gas monitors as individual components and as systems. The Telemetering & Control Group products include transmission systems, modems, and power converters. The Semiconductor Equipment Group products include renewable equipment, furnaces, and precision thermometers.
M-System Co., Ltd., established in 1976 and headquartered in Tokyo, Japan, is a manufacturer of instrumentation and control devices. The company is a supply partner for the interfacing applications of analog/discrete signals, communication networks and intelligence systems. Products offered by the company are signal conditioners, temperature transmitters, and isolators. These devices serve the general purpose of converting, isolating, and transmitting signals in various industrial processes, ensuring accurate control and monitoring. It has received certifications such as ISO 9001 for its quality management systems.
RKC Instrument has been continually growing for over half a century and strives to be a solution provider of measurement and control systems. RKC supplies quality products and professional engineering services quickly and efficiently. RKC specializes in everything from limit and multiloop controllers to heater break alarms and temperature sensors. RKC has a website in Chinese, English, and Japanese and has sales networks across the globe. Based on the management concept of “Realization of the highest quality,” RKC Instrument has obtained the accreditation of ISO9001, the international standard for quality management systems.
Yokogawa Test & Measurement Corporation was founded in Japan in 1954. Yokogawa currently serves a wide array of industries including the aerospace, automotive, consumer electronics, semiconductor and telecommunications industries with both hardware and software solutions. Among Yokogawa’s suite of products are oscilloscopes, voltage probes, power analyzers and meters, data acquisition tools, optical test equipment, a wide variety of handled meters, calibrators, and testers; analog instruments, and manometers.
Align Sourcing LLC is a thermoelectric and electronic product manufacturer and supplier based in Hamilton, New Jersey. The company offers a wide array of products through manufacturing affiliates located in the USA, China, and Russia, with a structured supply chain. Their extensive product line includes thermoelectric modules, generators, assemblies, as well as thermal interface materials, heat sinks, and thermoelectric elements, utilized for temperature control, power generation, heat recovery, cryogenics, and medical devices.
R. STAHL AG, established in 1876 and based in Waldenburg, Germany, is a manufacturer and supplier of electrical components, equipment, and systems used in hazardous areas. Some of its products include luminaires, control boxes, CCTV systems, distribution boards, and signaling devices. The products have several applications, including explosion protection for LNG and machine building. The company has subsidiaries in 21 countries and has applied an integrated management system for all its production sites, which brings together three ISO standards for quality management (9001), safety and health (45001), and environmental protection (14001).
Lake Shore Cryotronics, Inc. is an ISO 17025-certified manufacturer of industrial sensors and monitoring instruments that was established in Westerville, Ohio, USA in 1968. The company’s product lineup includes magnetic instruments such as gaussmeters and Helmholtz coils, temperature monitoring instruments such as sensors and AC resistance bridges, and cryogenic products such as recirculating gas coolers. The company’s products are used mainly in laboratory and industrial processes, including by clients in quantum computing and nanotech.
AMETEK Brookfield, founded in 1934 and located in Middleboro, Massachusetts, is a manufacturer of laboratory and process automation and industrial equipment, texture analyzers, and powder flow testers. The company’s diverse range of products includes viscometers, rheometers, texture analyzers, power flow testers, and temperature control. These instruments are used for tasks like measuring viscosity, assessing texture, analyzing powder flow properties, and maintaining precise temperatures. The company’s products are used for quality control, product development, and process optimization across diverse sectors, including food, pharmaceuticals, and chemicals.
Smart Fog Inc., founded in 2008 and based in Reno, Nevada, is a manufacturer of humidification and dry fog systems used for evaporative cooling, dust suppression, and as disinfection equipment. The Smart Fog commercial and industrial humidifiers include models such as ES100, T100, and ES100, while their disinfection models include wall-mount and mobile ES100MC. These industrial and commercial humidification systems are used in ripening rooms, cold storage, and food safety centers in the food processing industries. Other applications include data centers, health care, printers, and indoor growing.
Hansen Technologies, a subsidiary of Roper Industries, established in 1982 and headquartered in Illinois, USA, is a manufacturer of valves and components for industrial refrigeration systems. The company’s products include shut-off and solenoid valves, pressure-relief regulators, and safety detection systems. It also offers technical equipment such as level controls, defrost controllers, and motorized control valves. Its pop-eye Insight, which has a remote indication, provides real-time awareness of refrigerant release events. Its MVP multi-valve platform features MVP65-MVP100 valve station sizes with improved control functionality. The company’s anti-corrosion technology provides multi-layer protection and reduces maintenance costs through a standard installation.
inTEST Thermal Solutions, established in 1970 and headquartered in Mansfield, USA, is a manufacturer of temperature control systems for thermal testing, process cooling, and cold storage applications. The company’s product brands, Temptronic, Sigma Systems, and North Sciences, offer expertise in temperature control and simulation of extreme thermal environments from -185 to +500°C. It provides solutions for electronics, aerospace, and biomedical industries. With the capabilities of mechanical refrigeration, cryogenics, and cooling methods, the company ensures solutions for end users and OEMs. Its in-house expertise spans thermodynamics, mechanical, and software, utilizing Solidworks for design and manufacturing.
KTR Systems GmbH, established in 1959, is a manufacturer headquartered in Rheine, Germany, specializing in industrial drive technology. The company offers a range of mechanical components for drive technology, including couplings and torque limiters, designed to enhance energy efficiency and power density. In 2014, KTR Brake Systems GmbH was established as a subsidiary, offering hydraulic brake systems known as KTR-STOP and electromechanical brake systems called EMB-STOP. Additionally, KTR Systems develops hydraulic components and provides cooling systems for stationary hydraulics and mobile machines. The company's products are utilized in various industries, including the wind power, agriculture, machine tools, and automation sectors.
Conax Technologies is a manufacturer of seal fittings and temperature sensors that was established in 1954 in Buffalo, New York, USA. The company primarily produces temperature sensors such as thermistors and thermocouples, as well as compression seal fittings such as feedthroughs and glands. It also offers harness or cable assemblies, and calibration and repair services for customers requiring additional support. The company is ISO 45001:2018, AS9100D, and NADCAP-certified, and chiefly serves clients in the industrial processing sector.
Define Instruments Inc. is a manufacturer of IIoT products that was established in 1990 in Dallas, Texas, USA. The company specializes in IIoT gateways, data loggers, signal conditioners, and related products. These products include its Nimbus brand processing interface, its Zen brand 16-channel remote terminal unit, and its Merlin brand universal input digital indicator. The company operates internationally, with an additional manufacturing facility located in Auckland, New Zealand. It mainly serves clients in the industrial automation, industrial manufacturing, and energy sectors.
Founded in 1885 at Cork, Ireland, Johnson Controls Inc is a manufacturer of smart building solutions and safety systems for commercial and domestic needs. The company with their OneBlue product focuses on producing blueprints for advanced and healthy technologies associated with schools, commercial buildings, hospitals and residences. The products comprise HVAC systems, building automation, security systems, energy storage, and automotive batteries. These products are used for their effectiveness in offering energy efficacy, safety, comfortability and sustainability for the dwellers. Their AI based intelligence functioning offers more productivity while being sustainable and environment friendly.
Spirax Sarco is a manufacturer and supplier of steam system solutions, providing products and services to industries, including food and beverage, pharmaceuticals, chemicals, and more. The company was established in the UK in 1888 and has since expanded to over 60 countries worldwide, with its US headquarters based in Blythewood, South Carolina. One of their products is the TD62 Thermodynamic Steam Trap, which offers high efficiency and reliability for condensate removal in steam systems. They received awards like 2019 Innovation Award from the Institute of Chemical Engineers (IChemE) for their EasiHeat engineered system.
Honeywell International Inc., founded in 1906, in Wabash, Indiana is manufacturer of automotive parts, building technologies, and performance and safety materials for aerospace, The company's product portfolio includes electronic guidance systems, cockpit instrumentation, lighting, automotive parts, and primary propulsion and secondary power turbine engines. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. Their headquartere is located in Carolina and they have global sales offices and distributions channels.
Technotrans SE, established in 1970 and headquartered in Sassenberg, Germany, is a manufacturer and supplier of temperature management equipment and systems. The company's solutions include the entire temperature management process, from cooling plants to heating and water treatment to overseeing full thermal processes. Its products include filtration equipment, pumping and spraying equipment, and containerized or central cooling systems. These products and systems are used in electroplating, chemical processing, and electroplating. Its services include onsite maintenance and the supply of spare parts.
BrainChild Electronics Co., Ltd., established in 1977 and headquartered in Taipei, Taiwan, is a manufacturer of industrial control equipment. The company offers a wide range of products including temperature controllers, BC software, graphic recorders (paperless recorders & chart recorders), signal conditioners, and converters like ethernet converters among others. The company’s products serve various industries like food & pharmaceutical, textiles, plastics injection molding, petrochemicals, semiconductors, and more. The company receives the ISO 9001 certification from TUV Rheinland every year and holds a CSA certificate.
STEGO was founded in Germany in 1980. STEGO develops and manufactures products for heating, cooling, regulating, measuring, and lighting. In addition, STEGO supplies accessories for the devices. STEGO also has developed STEGO CONNECT as an industrial internet of things (IIoT) platform to facilitate efficient and automated use of their products.
Shimaden Co., Ltd. is a manufacturer of industrial temperature and humidity control equipment founded in 1953 and based in Tokyo, Japan. The company manufactures a wide range of products for monitoring and controlling environmental factors. Its products include various sensor converters for humidity, digital or analog flow rate controllers, and thyristor power regulators for controlling isothermal tanks. These products are mainly used by clients in the food and beverage, chemical processing, and metal fabrication sectors. The company also offers control and data acquisition software for customers needing additional support.
Fellow Tech Material Technology, based in Tokyo, Japan, is a manufacturer of polymer multilayer capacitors (PMLCAP), and was established in 2019 as a joint venture between Mitsui Chemicals Tohcello Inc. and Fellowes Japan Co. Ltd. The company primarily produces PMLCAPs with low equivalent series resistance, low noise, high capacitance density, and wide temperature range. It also offers customization services including adjustments to size, voltage rating, terminal type, and capacitance value. The company’s products are used in manufacturing automotive electronics, power supplies, communication devices, and industrial equipment.
Autonics Corporation, established in 1977 and based in Busan, South Korea, is a developer and manufacturer of automation products, which are marketed worldwide. Some of its products include sensors, peripheral connection equipment, motion devices, control devices, and process automation instruments. The automation products are used in various industries, including automotive, packaging, machine tools, metal, and marine. The company has 12 international offices spanning over 100 countries, a fully automated warehouse system, and various international quality certifications, including RoHS, CE, UL, and EAC. Its safety products meet the functional safety standards IEC 61508 and mechanical safety standards ISO 13849.
Omron Corporation, started in 1933 and headquartered in Kyoto, Japan, is a manufacturer of automation components, equipment, and systems, and it developed the first contactless proximity switch in 1960. It has four domains, including industrial automation, electronic components, healthcare, and social systems, and it provides products and services in around 120 countries and regions. Some of its products include microsensing devices, access control systems, industrial robots, surveillance cameras, and blood pressure monitors. In 1971, it developed the first online cash machine, and in 1972, it established Japan’s first welfare factory.
Celduc Inc. through Celduc Transfo was founded in 1960 as a manufacturer of transformers. Celduc Inc. is based in, France. Celduc Inc. was officially created in 2020 and headquartered in Centerport, New York. Celduc creates electronics and customized products for industries including railway, plastic, packaging, medical, and electronics. Celduc’s main product lines include solid state relays, magnetic proximity sensors, reed relays & switches, and customized products. Customized products are versions of other products adapted for use in industries with special needs such as nuclear power, aircraft, and agriculture.
Hampshire Controls Corp., established in Dover, New Hampshire in 1975 is a manufacturer of remote refrigerator, freezer and walk-in cooler temperature monitors. The company's product range includes Advanced sensors for real-time monitoring and alerts to prevent temperature fluctuations in freezers, integrated systems for precise temperature control Fiber thermal interfaces, internal loggers and alarm notification systems. Their products are used by OEMs, laboratories, clinics, hospitals, and blood banks. The company has a national distribution network and a customer support center.
Thermal Solutions LLC is headquartered in Lancaster, Pennsylvania. The company is a manufacturer of water heating equipment and boiler control systems used across commercial and industrial applications for customers across the United States through an independent sales network. The company’s 3 product lines include both condensing and non-condensing ultra high-efficiency hot water boilers & heaters and packaged systems & accessories. Condensing heaters range in capacity from 400,000 BTU/hour to 1 million BTU/H inputs at 97% efficiency. Non-condensing heaters maintain 87% efficiency at noise levels below 50 decibels.
Wattco was founded in 1972 and is headquartered in Lachine, Quebec. Wattco is a manufacturer of electric heating products for use in many utilities including oil and gas, renewable energy, HVAC systems, as well as others. Wattco products include immersion, circulation, inline, flanged, screw plug, pipe, over the side, industrial bore, tubular, finned tubular, strip, finned strip, cartridge, band, silicone rubber, open coil element, duct, finned tubular duct heaters, infrared radiant heaters, as well as other combinations of heaters and control panels.
Nitto Kinzoku Kogyo is a manufacturer and distributor of stainless steel containers for industrial processing applications established in Yashio Shi, Saitama Ken, Japan, in 1957. The company primarily produces stainless steel containers, pressurized vessels, and dollies in a range of dimensions and capacities. It also offers related equipment and accessories, such as hose bracket pads, mixing or temperature controlling equipment, and PTFE flare ferle hoses. The company’s products are commonly used in the pharmaceutical, food processing, and laboratory industries.
Schniewindt GmbH & Co. KG, founded in 1829 and based in Neuenrade, Germany, is a manufacturer and supplier of electrical equipment for energy distribution. The company produces high-voltage electrical resistors and electrical heating equipment for industrial and commercial purposes. It develops heaters for heating gases, liquids and solids, and high-voltage resistors for various applications including filtering and damping circuits in HVDC and FACTS systems. These technologies are used for the equipment of modern traffic engineering. The company also provides solutions for voltage and/or current measurement based on sensor technology, with an optical-digital data transfer system for use in future-oriented, digitally automated substations.
MOD-TRONIC Instruments Limited was established in 1972 in Brampton, Ontario, Canada. MTis a distributor of industrial sensors, transducers, heaters, controls, and instrumentation, primarily made in the USA as well as Japan, Switzerland, and Germany. MT’s customers are primarily in the aerospace, building automation, manufacturing, medical, military, oil and gas, and water treatment industries but also serves individuals. MT offers an above industry standard 5-year warranty and technical support on every product sold.
Delta OHM S.r.l., established in 1978 and based in Caselle di Selvazzano, Italy, is a manufacturer and supplier specializing in meteorological devices. The company's product portfolio includes ultrasonic anemometers, particulate matter transmitters, barometric pressure transmitters, thermometers, and other devices. These devices are utilized in various industries, including environmental monitoring, meteorology, renewable energy, agriculture and food, as well as health and safety. The company holds both ISO 9001:2015 and ISO 14001 certificates, and it employs more than 330 individuals across sixteen global locations.
FineTek Co., Ltd, established in 1979 and headquartered in New Taipei City, is an ATEX & IECEX and TAF/ilac-MRA certified manufacturer and supplier of process automation and flow measurement solutions. The company's product portfolio includes Level Transmitters, Flow Measurement devices, Pressure instruments, and Temperature sensors. These products are utilized for monitoring and controlling process conditions, ensuring safety in industrial environments, and optimizing resource allocation. They are adopted by industries such as Water Treatment, Maritime, Steel, Power, and Construction. Additionally, the company offers services in wireless technology integration, pneumatic, and product solutions.
Copeland LP, headquartered in Sidney, Ohio, USA, is a manufacturer and supplier of HVACR solutions and softwares. Its diverse product range encompasses compressors, condensing units, hydrofluorocarbon products, and refrigerants. With a portfolio of over 3,000 patents, the company provides a pivotal role to the field of air conditioning and refrigeration, particularly through its scroll compressors. Additionally, the company offers Sensi and Verdant smart thermostats, enhancing temperature control, energy efficiency, and overall comfort.
Linde PLC is based in Danbury, Connecticut, USA, and is a manufacturer of gasses for the industrial sector established in 2018 following the merger of Praxair, Inc. and Linde AG. The company primarily offers various gasses such as argon, hydrogen, and nitrogen for use in industrial processes. It also offers products from these gasses including surface coatings, sputtering targets, and metal powders for enhancing component or material performance in different environments. The company is ISO 9001, ISO 14001, and ISO 45001-certified and operates internationally, with locations and partner distributors in over 100 countries.
Invotech Solutions Limited is a manufacturer and distributor of mold shop and plasticizing products that was established in Buckinghamshire, the United Kingdom, in 2005. The company specializes in producing components and equipment for molding and plasticizing operations. These products include shut off nozzles, insulation jackets, and magnetic water filtration solutions. It also offers mold ancillaries such as filters or mixers from brands such as Samixco, Athena, and Smartflow. The company chiefly serves its clients in the consumer electronics, automotive, and industrial packaging sectors.
Rockwell Automation, Inc. was founded in 1903 and is headquartered in Milwakee, WI. Rockwell Automation provides industrial automation and digital transformation solutions around the world. Rockwell Automation operates through their intelligent devices, software & control, and lifecycle services segments with both hardware and software products and services. The Intelligent Devices segment offers drives, motion, safety, sensing, industrial components, and configured-to-order products. The Software & Control segment provides control and visualization software and hardware, information software, and network and security infrastructure solutions. The Lifecycle Services segment provides consulting, professional services and solutions, and connected and maintenance services through independent distributors.
Japan Sensor Corporation, founded in 1972, is a Japanese manufacturer based in Minato-ku, Tokyo, specializing in infrared measurement solutions. The company's product range includes fiber-type, fiber-less, and general-purpose infrared thermometers. These products feature quartz-permeable wavelengths, enabling measurement through glass, as well as the fastest response time of 0.001 seconds, facilitating rapid detection of temperature changes. Sensor heads, fiber cables, and temperature converters are also installed based on specific requirements. The company also offers indicating setters for infrared thermometers and emissivity meters.
Sinus-Jevi Electric Heating B.V., founded in 1922 and part of the Nibe Group, is a manufacturer and supplier in Medemblik, the Netherlands, specializing in electrical heating devices. Certified with ISO 9001 and ISO 14001, the company offers various space heating products, including air-duct and anti-condensation heaters, explosion-proof column radiators and fan heaters, as well as finned tube heaters. It also produces a range of resistors, such as air-cooled and water-cooled load banks. These products are used in various industries, particularly in harsh environments like onshore and offshore petrochemical sectors.
Rapid Pump & Meter Service Co., Inc. (Rapid Service) began in 1960 and currently operates in Paterson, New Jersey. Rapid Pump & Meter Service Co. primarily serves commercial services, municipal services, the industrial sector, and transportation industry both as a distributor and with service and support. As a distributor, Rapid Service offers several types of industrial pumps and industrial grinders of various sizes. Additional offerings include meters, controls, and mixers. As a service provider, Rapid Service offers emergency service, installation, design, engineering, retrofitting, troubleshooting, maintenance, and repair.
Tecmark, headquartered in Mississauga, Ontario, Canada, is a manufacturer and distributor of electric components. Their product range includes switches, sensors, thermostats, spa side controls, and air transmitters, catering to industries like agriculture, appliances, HVAC, leisure, and marine. Tecmark's products serve a wide range of applications, from controlling the flow of electricity and fluids to measuring physical quantities such as temperature, pressure, and level. The company holds several certifications such as ISO 9001:2015, CSA, and UL certifications.
O&M Heater supplies various types of innovative heaters, temperature controllers, and related products to many diverse industries. Some of these include heavy industry, automotive, medical instruments, musical instruments, aerospace, and semiconductors. O&M Heater specializes in rubber heaters that can be deployed where metal heaters cannot be utilized. O&M offers customization across various standards based on customer requirements.
Pixsys Electronics was established in the early 1990s and is headquartered in Pianiga near Padua, Italy. The company services industrial sectors such as railway, water treatment, plastics, and refrigeration to customers globally. The company’s hardware components include controllers, terminals, converters, sensors, and others. The company also provides software tools for monitoring hardware performance. The company also sells a multizone monitoring and recording system called iModView and a graphic datalogger called iTrendView.
Delta Electronics was founded in 1971 in Taipei, Taiwan. Delta Electronics is a global provider of power and thermal management solutions, serving power electronics, automation, and infrastructure. Delta’s power electronics division sells components such as inductors, power and system components such as industrial power supplies and external adapters, fans and thermal management such as DC brushless fans and motors, and automotive electronics. Automation includes industrial automation and building automation subdivisions. Infrastructure includes ICT infrastructure, energy infrastructure & industrial solutions, and display & visualization. Delta Electronics also provides solutions for data center, telecom energy, and EV charging.
WIKA Group was founded in 1946 and is headquartered in Klingenberg, Germany. The company serves industries such as food and beverage, power generation, refrigeration, and semiconductor, but is primarily known for medical equipment. The company’s six primary product market segments are Pressure, Temperature, Level, Force, Flow, and Calibration. In addition, the company offers Industrial IoT services including conditional monitoring and alarming, asset tracking, predictive maintenance, and process automation. The company also offers standard calibration, repair, and consultancy services in addition to providing online tools for customer assistance.
JUMO GmbH was established in 1949 in Fulda, Germany. The company is a system provider for individual sensor and automation solutions, creating components for measuring as well as products for registration, monitoring, control, and automation. Through these, the company serves a wide range of industries such as food and beverage, railway, shipbuilding, and water treatment with both components and complete solutions. The company’s product segments include Temperature, Pressure, Flow, Liquid Analysis, and Level. The company offers many services to customers including calibration, field service, repair service, and maintenance contracts.
Armstrong International Inc., founded in 1900 and based in Three Rivers, Michigan, is a multi-national manufacturer of thermal utility solutions such as heat transfer coils, heat pumps, and steam products. It provides custom services to companies in various industries, including hospitality, healthcare, and higher education, and a majority of its international facilities have ISO 9001 certification. The products also conform to the Pressure Equipment Directive (PED) requirements of 2014. In 1996, it pivoted from manufacturing and added thermal energy engineering services, and in 2005, it received trading approval from the United Nations’ UNFCCC for its steam system methodology.
Value Tronics International Inc., founded in 1992 and based in Elgin, Illinois, is a distributor of a wide range of equipment, such as signal generators, power supplies, and spectrum analyzers. The company stocks over 8,000 products, including used and new equipment from over 300 manufacturers like Berkeley Varitronics, Compression Techniques, and Delta Elektronika. It also buys obsolete and unused testing and lab equipment, which includes meters, oscilloscopes, and data loggers. The company provides financing options that allow customers to pay for purchases later. It also has a loyalty program where customers earn a 2% credit after a purchase.
PMC-STS Inc., founded in 1963 and based in Danbury, Connecticut, is a manufacturer of pressure, vacuum, and level sensor instruments for aerospace, motorsports, and water applications, among others. The company also provides customized solutions and products to meet challenging customer requirements. It is the first manufacturer offering flush-mounted transmitters for measuring in-process pulp in wastewater, paper, and other difficult fluid level and pressure measurements. In 2022, the company was acquired by Sensor Technik Sirnach AG to help penetrate the North American market further and benefit from both application and product expertise.
Thermon Group Holdings Inc., started in 1954 and headquartered in Austin, Texas, is a manufacturer of industrial heating solutions such as heating systems, power, and heat tracing solutions. It has ten manufacturing facilities with over 10,000 customers and has been public since 2011. The company serves its customers through sales, service individuals, and distributors in over 30 countries and also provides recurring facility assessment, turnkey construction installation, and engineering services. All its manufacturing facilities are ISO 9001 certified, and all its products are tested and certified for global use by several approval agencies such as ETL, CSA, and UL.
GMC Instruments is the result of a merger in 1993 from companies originally dating back to 1906. Under the Gossen Metrawatt and Camille Bauer brands, the company provides hardware, software, and services to several industries including medical devices and manufacturing. The company’s hardware division provides electrical safety devices, photometry equipment, energy management systems, and vital signs measurement devices. The company’s software lineup includes database management software, power analysis software, and medical device software.
OMRON Industrial Automation is the UK branch of OMRON, originally founded in Japan in 1933. OMRON Industrial Automation serves food and beverage industry, panel board design, automotive manufacturing industries among others. OMRON Industrial Automation products categories include automation systems such as industrial PCs and human machine interfaces (HMI), safety such as safety switches and safety logic control systems, switching components such as solid state relays, motion & drives such as motion controllers, sensing such as photoelectric sensors, software, robotics, quality control & inspection systems, as well as control components including power supplies and digital panel indicators.
Sifam Tinsley UK is based in London, England, United Kingdom, and is a supplier of electrical control and monitoring products for industrial automation that was established in 1946 as a subsidiary of Sifam Tinsley Instrumentation. The company’s product inventory includes digital and analog panel meters for measuring AC and DC voltages or currents, power quality analyzers for gauging parameters such as harmonics or flicker, and transducers for converting electrical signals into digital or analog inputs. The company’s products are commonly used by clients in Europe’s marine, power generation, and mining industries.
FactoryMation, LLC is a distributor of control products for the industrial sector that was established in 2006 in Canton, Georgia, USA. The company offers digital panel meters for tracking parameters such as voltage or frequency, AC drives for controlling the torque or speed of electric motors, and emergency disconnects for isolating electrical equipment or circuits from a power source. It also offers programmable controllers, pushbuttons, and relays for semi- or fully automated facility layouts. The company’s products are commonly used in the industrial manufacturing sector, including by clients in the automotive and food and beverage markets.
Plastic Engineered Products, Co. is owned by the Ryan Herco Flow Solutions Company and is a a distributor of fluid handling, control and high value filtration systems for corrosive and ultrapure systems. PEP offers both sales as well as services. Sales offerings include tubing, hoses, measurement & control devices, housings, tanks, and pumps. Services include custom plastic & fiberglass fabrication while field servies include emergency repair as well as maintenance and testing as well as fabrication and welding.
Solar Biz Inc. began in the 1970s in Ft. Atkinson, Wisconson. Solar Biz offers complete solar panel systems for residential and commercial customers ranging from under 5 watts to over 400 watts. Systems include solar panel components with racking and mounting, inverters, power centers, solar charge controllers, batteries, and accessories, AC and DC enclosures, circuit protection, hydro and wind generators and accessories, water pumps and water filtering, tanks, heaters, hot tubs, rain catchments, and appliances such as fans, gas ranges, refrigerators and freezers.
Classic Automation based in Webster, New York is a parts distributor and repair servicer for installed controlled systems, drives, and servo motors, as well as a purchaser of well-maintained surplus systems. Parts that Classic Automation distributes and repairs include DcS, PPLC, and CNC control systems, panel controllers, HMI panels, display panels, drives, encoders, resolvers, and power supplies. Classic automation also offers hard drive repair services and support for customizing functionality in Panelicity controllers.
AutomationDirect.com was founded in 1994 to provide solutions for the industrial automation market and has been growing its list of offerings ever since. AutomationDirects’ extensive catalog includes individual components such as cables, various controls, I/O devices, relays, gauges, fittings, and sensors to complete systems. Many parts and devices, especially PLC units are customizable. AutomationDirect.com also provides support via video instructions, online manuals, a learning library, an active community forum to further assist customers.
Saint Clair Systems, established in 1990 and based in Washington, Michigan, is a manufacturer and supplier specializing in industrial temperature and viscosity control solutions. The company's product portfolio includes water-based temperature control systems, falling-piston viscosity sensors, and heat exchangers. These products are used in various industries, including the automotive industry, aerospace, and robotics and automation. The company also provides services including technical support, training programs to ensure that customers understand how to use its products, and custom solutions tailored to specific industries and applications.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Thermalogic Corporation |
2.4%
|
| 2 | DBK USA, Inc. |
2.1%
|
| 3 | Taco Comfort Solutions |
1.7%
|
| 4 | Traceable(R) |
1.7%
|
| 5 | Russells Technical Products. |
1.6%
|
| 6 | Nordson Corporation |
1.6%
|
| 7 | Thermcraft, Inc. |
1.5%
|
| 8 | Sigma Thermal Inc |
1.4%
|
| 9 | Chino Works America Inc. |
1.3%
|
| 10 | TEGAM Inc. |
1.3%
|
Derivation Method
The ranking is calculated based on the click share within the temperature controller page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
53 | 55.2% |
|
Japan
|
13 | 13.5% |
|
Germany
|
8 | 8.3% |
|
Canada
|
5 | 5.2% |
|
Italy
|
4 | 4.2% |
|
United Kingdom
|
3 | 3.1% |
|
China
|
2 | 2.1% |
|
Switzerland
|
2 | 2.1% |
|
Poland
|
2 | 2.1% |
|
Spain
|
1 | 1.0% |
|
Greece
|
1 | 1.0% |
|
Belgium
|
1 | 1.0% |
|
Taiwan
|
1 | 1.0% |
UNO Co., Ltd.
30+ people viewing
Last viewed: 17 hours ago
■Features ・Achieves high operability by adopting a 5-inch color touch panel. - A variety of preset programs (26 patterns) and original setting pro...
Blast Co., Ltd.
20+ people viewing
Last viewed: 5 hours ago
■Summary This is a unit for culturing cells on a microscope stage. Live cell observation and time-lapse photography can be performed. ■ Necessary ...
Igarashi Manufacturing Co., Ltd.
60+ people viewing
Last viewed: 17 hours ago
■2-point and 4-point temperature controllers for heaters designed for ease of use Igarashi Seisakusho's HC series is a temperature controller that ...
IWAKI CO., LTD.
270+ people viewing
Last viewed: 1 day ago
■ Adopts an environmentally friendly new refrigerant A new refrigerant with zero ozone layer coefficient is adopted and supports specific Fron regu...
2 models listed
Ebara Refrigeration Systems Co., Ltd.
90+ people viewing
Last viewed: 10 hours ago
■Summary ・Water processing capacity is approximately 120㎡/h ・Possible up to 1 cell ・The heat exchanger uses seamless, deoxidized copper tubes w...
IWAKI CO., LTD.
230+ people viewing
■ Adopts an environmentally friendly new refrigerant The new refrigerant with zero ozone layer coefficient is adopted. Compatible with specific Fro...
2 models listed
IWAKI CO., LTD.
340+ people viewing
■ Equipped with high -performance inverter freezer The inverter and the electronic expansion valve provide excellent temperature tracking and demon...
2 models listed
IWAKI CO., LTD.
350+ people viewing
Last viewed: 4 hours ago
■ Adopts an environmentally friendly new refrigerant A new refrigerant with zero ozone layer coefficient is adopted and supports specific Fron regu...
2 models listed
IWAKI CO., LTD.
290+ people viewing
Last viewed: 19 hours ago
■ Adopts an environmentally friendly new refrigerant A new refrigerant with zero ozone layer coefficient is adopted and supports specific Fron regu...
2 models listed
IWAKI CO., LTD.
320+ people viewing
■ Adopts an environmentally friendly new refrigerant A new refrigerant with zero ozone layer coefficient is adopted and supports specific Fron regu...
2 models listed
IWAKI CO., LTD.
260+ people viewing
Last viewed: 4 hours ago
■ Adopts an environmentally friendly new refrigerant Ozone layer destruction coefficient of new refrigerant with zero coefficient is adopted and su...
2 models listed
RKC INSTRUMENT
190+ people viewing
Last viewed: 18 hours ago
■REX-C series REX-C100 / REX-C400 / REX-C410 / REX-C700 / REX-C900 ■Easy to use with excellent cost performance From hobby pottery to industrial t...
10 models listed
Fellow Tech Material Technology
960+ people viewing
This is the optimal thermo module for fields that are essential for durability, in addition to rapid response and precision temperature control. I...
21 models listed
Sensor Controls Co., Ltd.
120+ people viewing
Last viewed: 15 hours ago
■Features ・Plate size 100×90mm Temperature range can be controlled from -60℃ to +145℃ ・Ideal for temperature characteristic testing of car device...
O&M HEATER CO.,LTD.
60+ people viewing
Last viewed: 17 hours ago
◼︎Simple and robust analog temperature controller This is a type of temperature controller that opens and closes electrical contacts by the expansi...
![Hot water circulation device/thermal oil circulation device Roll temperature control device [2-story specification]-STECH LIMITED.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3005316202409066.png)
STECH LIMITED.
40+ people viewing
Temperature controller for hot water for rolls, molds, etc.
Kulow System Co., Ltd.
50+ people viewing
Last viewed: 17 hours ago
Features ■Improved efficiency [Air-cooled type (outdoor installation type)] Equipped with a new high-performance inverter compressor ①Improved effi...
UNO Co., Ltd.
30+ people viewing
Last viewed: 8 hours ago
■Features ・Achieves high operability by adopting a 5-inch color touch panel. - A variety of preset programs (26 patterns) and original setting pro...
Fellow Tech Material Technology
610+ people viewing
Last viewed: 14 hours ago
It can be used in a wide range of applications that require high efficiency in addition to high heat absorption. Main use includes optical equipmen...
8 models listed
Ebara Refrigeration Systems Co., Ltd.
50+ people viewing
Last viewed: 17 hours ago
■Summary A chiller for semiconductor manufacturing equipment that uses natural refrigerant (CO2). Ebara's inverter control technology and built-in ...
RKC INSTRUMENT
220+ people viewing
Last viewed: 4 hours ago
■48mm square size with front loader port - All models are equipped with a front loader communication port to improve maintainability on site. ・Pro...
10 models listed
O&M HEATER CO.,LTD.
50+ people viewing
Last viewed: 17 hours ago
◼︎Temperature data can be logged wirelessly By setting it to the Digithermo OT-9, this data logger can record temperature data while adjusting the ...
Fintech Tokyo Ltd.
30+ people viewing
Last viewed: 8 hours ago
■Summary ・This is a dedicated controller for hot air heaters (small hot air heaters). We have a lineup of two models depending on the required fun...
Katahisado Co., Ltd.
60+ people viewing
Last viewed: 22 hours ago
Imported product made by Chocolate World, headquartered in Belgium. ■Applications automatic tempering ■Features ・Easy tempering ・Easy molding ...
Kulow System Co., Ltd.
50+ people viewing
Last viewed: 10 hours ago
Features ■Improved efficiency [Air-cooled type (outdoor installation type)] Equipped with a new high-performance inverter compressor ①Improved effi...
UNO Co., Ltd.
30+ people viewing
Last viewed: 12 hours ago
■Features ・Achieves high operability by adopting a 5-inch color touch panel. - A variety of preset programs (26 patterns) and original setting pro...
Blast Co., Ltd.
30+ people viewing
Last viewed: 5 hours ago
■Summary A panel-shaped glass heater is assembled into a holder to form a unit. Ready to use. ■Configuration A temperature sensor is attached to a...
Shinko Technos Co., Ltd.
490+ people viewing
Last viewed: 1 hour ago
When multiple units are connected, the power supply and communication lines can also be connected, so it is a compact communication type temperatur...
10 models listed
Shinko Shoji Co., Ltd.
50+ people viewing
Last viewed: 3 hours ago
Achieves gain (temperature) correction for RF amplifier circuits with a single passive element. A correction circuit with excellent response speed ...
Colette Industries Co., Ltd.
200+ people viewing
Last viewed: 1 day ago
■Summary A compact, lightweight, and highly accurate thermocontroller. ■Features - Adopts a self-preservation circuit during power outages. ・Buil...
4 models listed
