Nakamura Manufacturing Co., Ltd.'s Dimensional Metrology Equipment

■Features External and internal measurements are possible with one jaw. The jaw tip is thin, making it ideal for measuring narrow areas.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features Depth gauge with hook without fine movement feed

• Measuring Equipment

• Dimensional Metrology Equipment

■Features The hook at the tip firmly catches the side hole

• Measuring Equipment

• Dimensional Metrology Equipment

■Features By attaching an exchange span, you can easily measure workpieces with wide openings.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Extra fine depth bar of φ0.5mm ・Please be careful not to press the bar too hard when measuring.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Ideal for depth measurement with wide openings ・With external output function

• Measuring Equipment

• Dimensional Metrology Equipment

■Features Two types of probes are included as standard. Ideal for measuring the outside of grooves, etc. With external output function.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features The cylindrical jaw is suitable for measuring the thickness of curved parts. With external output function.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・3 measurements possible with depth bar with hook ・New hook tips φ6 and φ8 are now available. ・With data output function ・A base atta...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Since the measuring head is located directly below, the measured value can be read from above (overhead view). ・Actual measured values...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Offset type round hole pitch caliper ・Comes with a special gauge ・E-RM-2-15BL: G-20-4 ・E-RM-2-30BL: G-25-8 ・E-RM-2-60B: G-25-8 ・Wi...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Round hole pitch caliper for small diameter holes ・A dedicated reference gauge G-10-3 is included. ・With external output function

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Pitch measurement between holes and hole measurement from end face can also be done with this one tool. ・Direct measurement type that ...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Direct reading type ・The main measuring head and conical/cylindrical jaws can be replaced. ・Three measurements can be made with this ...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Round hole pitch caliper for long lengths ・A dedicated reference gauge G-10-8 is included. ・With external output function

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Ideal for hole-to-hole pitch measurement, direct reading type ・With external output function

• Measuring Equipment

• Dimensional Metrology Equipment

■Features - Calipers ideal for measuring the center pitch of holes with the same diameter. Stable measurement is possible with the conical probe. ...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Ideal for measuring the pitch of round holes with steps ・Direct reading type

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Ideal for measuring holes from the end face, direct reading type ・With external output function

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・φ1.5mm depth bar is ideal for narrow and deep holes ・With external output function

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・The depth bar is as thin as φ1.5mm, making it ideal for measuring the depth of small-diameter holes. -The transmitter is built into the...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Rotating scriber increases convenience ・The tip of the scriber has a super steel tip. ・Straight scriber is also included as standard.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Ideal for positioning machines, linear motion equipment, etc. - Equipped with an external output function, allowing you to build statis...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Can be used for regular depth measurement and replacement spans (optional) and works with wide widths. ・With fine movement feed

• Measuring Equipment

• Dimensional Metrology Equipment

■Features Ideal for measuring dimensions during groove machining for flanges. Conforms to JPI standards.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features Caliper for measuring flange grooves. JPI standard, 4 probes included.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Vernier type long depth gauge ・Detailed measurements are possible with fine movement feed.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features Ideal for measuring workpieces that cannot be measured with a straight one, such as deep in a blind hole.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Ideal for measuring the pitch of round holes with steps. ・The measuring head on the main scale side is removable, and it is also possi...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Round hole pitch caliper for small diameter holes ・Pitch measurement of round holes and measurement of holes from the end surface are ...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features Two types of measurement possible with one tool: pitch measurement of holes with equal diameter, and measurement from the end face to the...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features External and internal measurements are possible with one jaw. SCM long jaw type.

• Measuring Equipment

• Dimensional Metrology Equipment

■Features Simple standard depth gauge

• Measuring Equipment

• Dimensional Metrology Equipment

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Height gauge with crank-shaped scriber ・The tip of the scriber has a super steel tip. ・Easy reading with magnifying lens included as ...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Height gauge with straight scriber ・The tip of the scriber has a super steel tip. - Easily read with a magnifying lens

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Ideal for measuring gap width and groove width ・The actual value will be 1/10 (move the decimal point to the left by 1 digit) from the...

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Vernier type small hole depth gauge ・Depth bar is φ1.5mm

• Measuring Equipment

• Dimensional Metrology Equipment

■Features ・Supports various dimension measurements with 3 types of probes ・Ideal for shaft groove machining parts, hole machining parts, etc. ・V...

• Measuring Equipment

• Dimensional Metrology Equipment