19 Bollard Manufacturers in 2024
This section provides an overview for bollards as well as their applications and principles. Also, please take a look at the list of 19 bollard manufacturers and their company rankings. Here are the top-ranked bollard companies as of April, 2024: 1.Reliance Foundry Co. Ltd., 2.Wilcox Door Service Inc., 3.BollardsUSA.
Table of Contents
What Is a Bollard?
A bollard, also known as a car stop, is defined as a “fence or barrier on a road.” Generally shaped like cylindrical posts, bollards are installed perpendicular to the ground. They are often placed at intersections, near pedestrian crossings, or at the openings of intersections with the primary aim of preventing human casualties. Bollards prevent vehicles from encroaching onto sidewalks, thereby enhancing safety.
Types of Bollards
There are two main types of bollards.
1. N-Type Bollards
N-type bollards are non-collision-resistant accessories used to deter vehicles from entering specific areas. They are also employed to separate pedestrian and vehicular traffic at intersections. While similar to pedestrian and bicycle fences in maintaining pedestrian traffic, N-shaped bollards specifically prevent pedestrian crossings.
2. H-Shaped Bollards
H-shaped bollards are impact-resistant and used to prevent vehicle entry. They are typically installed to demarcate openings, similarly to N-shaped bollards. In cases where a series of vehicle barriers cannot be installed, H-shaped bollards serve as a supplementary measure.
Bollards Installation Criteria
The installation of bollards is categorized into N-type and H-type, each with specific criteria.
1. N-Type Bollards
N-type bollards are installed in areas with low vehicle speed and high pedestrian traffic. They are typically used where the road width is narrow, visual distinction is possible, and pedestrian safety can be ensured. The height of N-type bollards should not exceed 0.85 m to maintain visibility for both vehicles and pedestrians.
2. H-Shaped Bollards
H-shaped bollards are installed on roads with high pedestrian risk, high vehicle speeds, or poor visibility. They are crucial for safety, especially where pedestrians are likely to gather. The height of H-shaped bollards should be between 2 and 3 feet, considering vehicle bumper heights, which vary depending on the type of vehicle.
Type HC
Type HC bollards are installed for vehicles with a mass of 1.8 tons, collision speeds of 20 m/h or more, and entry angles to the sidewalk of 15 degrees.
Class HB
HB bollards are for vehicles with a mass of 1.8 tons, collision speeds of 25 m/h or more, and entry angles to the sidewalk of 15 degrees.
Location of Bollards
Bollards are typically installed after considering road and traffic conditions, as well as past accidents. The need for bollards varies by region and requires a comprehensive decision based on regional needs and safety inspection results. For H-shaped bollards, the distance between them must be less than 1.5 meters to prevent vehicles from slipping through.
Additionally, when considering sidewalk users, including those in wheelchairs, with canes, or bicycles, appropriate widths must be ensured. For wheelchair access, a width of approximately 3 feet is required, while cane users need about 4 feet. In snowy areas, a minimum width of 3 feet is necessary, along with considerations for snow removal operations and pedestrian safety.
List of 19 Bollard Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- Canada
- China
- Italy
- Japan
- Spain
- United Kingdom
-
-
-
FAAC (UK) Ltd,
BOLLARD
Manufacturer Overview
Faac (UK) Ltd, established in 1965 and headquartered in Bologna, Italy, is a manufacturer of access automation solutions, including gate and barrier automation, bollards, and parking systems. The company specializes in vehicular access automation for residential, commercial, and industrial sectors. Its products include gate automation for swing and sliding gates, automatic barriers including magnetic variants, and automatic pedestrian doors. The company also offers various services, such as installer location, training, and technical support.
-
-
-
-
-
Anter System Polska Sp. z o.o.
PROTECTIVE BOLLARDS
Manufacturer Overview
Anter System Polska Sp. z o.o., established in 2006 and headquartered in Wrocław, Poland, is a manufacturer and supplier of flexible protective barriers made of polymer plastics. The company's products include pedestrian barriers, safety gates, and loading dock protection. These products are used in various scenarios, such as event management, street safety, and warehouses, to protect people and structures. Its services include delivery and installation, and it provides a five-year warranty and post-warranty service. Its notable clients include Inter Parts, CCC Shoes & Bags, and Siemens.
-
-
-
-
-
CAME URBACO
AUTOMATIC BOLLARDS
Manufacturer Overview
CAME URBACO is a French designer and manufacturer of security and access control products that was established in Monteux in 1984 before its acquisition by Italy’s CAME Group of companies in 2012. The company primarily produces retractable bollards for control parking or traffic access, turnstiles for regulating human entry or exit into private areas, and toll systems for border pay management operations. It also offers custom engineering and product maintenance services for clients requiring additional support. The company chiefly serves France’s transportation, mass transit, and commercial sectors.
-
-
-
-
-
AIDA ENGINEERING CO.LTD.
bollards
Company Overview
AIDA ENGINEERING CO., LTD. established on August 17th, 1974, and headquartered in Okayama, Japan, is a manufacturer and supplier of various automated special-purpose machines. The company's product range includes the No-toolchange Cold Roll Forming Machine BURS21, Fine Tube Mill Line (FTL), Forming Rolls, Special-Purpose Machines, and Self-service Car/Bicycle Parking Control Systems. These products are utilized in manufacturing processes, infrastructure projects, and transportation solutions. They serve industries such as machinery manufacturing, transportation, infrastructure development, and electronics. In addition to its product offerings, the company provides after-sales support, on-site installation, design services, and trial testing.
-
-
-
-
-
Quiko Italy SRL
AUTOMATIC BOLLARDS CENTURION
Company Overview
Quiko Italy SRL is an Italian manufacturer and distributor of entry access automation systems that was established in Sossano, Vicenza in 1968. The company’s product lineup includes sliding gate, underground gate, and swing gate operator systems. It also offers automatic barriers and bollards for access control applications, and various accessories for portfolio products. The company’s products are commonly used in the residential, commercial, and industrial sectors. It also serves clients in the security, defense, and transportation industries.
-
-
-
-
-
Reliance Foundry Co. Ltd.
Bollards
Company Overview
Reliance Foundry Co. Ltd. is a manufacturer of superb custom and stock cast metal products. Established in 1925 and located in USA. The company is a long-recognized supplier of outdoor site furnishings, bike storage systems, hardscape products, and traffic management supplies. Reliance also draws on its long history to provide excellence in the manufacture of steel wheels as well as superior custom casting services. Reliance Foundry has built upon a long tradition of metal casting expertise to become an award-winning supplier for high-profile and everyday needs across North America.
-
-
-
-
-
BollardsUSA
Bollards
Company Overview
BollardsUSA, founded in 1909, is a US-based manufacturer and distributor of fabricated steel and cast iron products, serving a variety of industries across North America. The company, a division of J.R. Hoe, offers a wide range of decorative bollards, including cast iron bollards, coated steel bollards, and stainless steel bollards. These bollards are available in different shapes, sizes, and materials to help meet various security and safety needs. The company's products are used to improve safety, security, and traffic control in various settings, including industrial facilities, parking lots, storefront safety, and pedestrian zones.
-
-
-
-
-
-
-
Hörmann
Security Bollards
Company Overview
Hörmann, a company founded in 1935 and headquartered in Leicestershire, England, is a manufacturer and supplier specializing in the production of doors. The company's product portfolio includes side-sliding sectional doors, front doors, and garage door operators. These products are used in various applications, including residential construction, commercial settings such as warehouses and factories, and smart home automation. The company provides services, including installation assistance, technical support, and maintenance and servicing, with production and sales locations in various countries, including the United States, India, and Ireland.
-
-
-
-
-
-
-
TrafficGuard, Inc.
BOLLARDS
-
-
-
-
-
Avon Barrier Corporation Ltd
Bollards
-
-
-
-
-
PROMStahl GmbH
Bollards
-
-
-
-
-
Fonderie Belli Srl
Sea Bollard ductile iron 100T
-
-
-
-
-
BFT S.p.A.
Parking and traffic bollards
-
-
-
-
-
Frontier Pitts Ltd.
Bollards
-
-
-
-
-
EL-GO Team
HIGH SECURITY BOLLARDS
-
-
-
-
-
Wilcox Door Service Inc.
Bollards & Guarding
Distributor Overview
Wilcox Door Service Inc., established in 1912 and located in Mississauga, ON, is a supplier of commercial doors and provides maintenance and repair services. The company supplies industrial doors, loading docks, vehicle restraints, dock seal shelters, and door operators. The products are used in pharmaceutical, automotive, property management, manufacturing, and government industries. It offers fire door drop testing, planned maintenance programs, door and dock installations, and energy-saving programs. The company has received the Top Dealer Award 2015-2020 by TNR Doors and Chamberlain's Award of Excellence 2017-2019.
-
-
-
-
-
Calpipe Security Bollards
Bollards
Distributor Overview
Calpipe Security Bollards, founded in 1998 and headquartered in Rancho Dominguez, CA, is a global supplier of bollards, bollard security, and bollard solutions. The company offers bollard solutions for powering and protecting high-profile and populated spaces around the world. Its core products include security bollards, electrical conduit and fittings, and cable management solutions. These products find applications in industries such as electric power, telecommunications, transportation, commercial, and retail. Since its establishment, the company has provided bollard solutions for high-profile and high-traffic public places worldwide, including the Santa Monica Pier, AT&T Park, and Times Square.
-
-
Bollard Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Reliance Foundry Co. Ltd. |
16.8%
|
| 2 | Wilcox Door Service Inc. |
9.5%
|
| 3 | BollardsUSA |
7.9%
|
| 4 | Calpipe Security Bollards |
6.8%
|
| 5 | AIDA ENGINEERING CO.LTD. |
6.3%
|
| 6 | TrafficGuard, Inc. |
5.8%
|
| 7 | Avon Barrier Corporation Ltd |
5.8%
|
| 8 | CAME URBACO |
5.3%
|
| 9 | Hörmann |
5.3%
|
| 10 | Frontier Pitts Ltd. |
4.7%
|
Derivation Method
The ranking is calculated based on the click share within the bollard page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- AIDA ENGINEERING CO.LTD.: 128
Newly Established Company
- AIDA ENGINEERING CO.LTD.: 1974 (50 years ago)
- Quiko Italy SRL: 1968 (56 years ago)
- Hörmann: 1935 (89 years ago)
Company with a History
- Hörmann: 1935 (89 years ago)
- Quiko Italy SRL: 1968 (56 years ago)
- AIDA ENGINEERING CO.LTD.: 1974 (50 years ago)
Global Distribution of Bollard Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
Japan
|
1 | 16.7% |
Italy
|
1 | 16.7% |
Canada
|
1 | 16.7% |
China
|
1 | 16.7% |
United Kingdom
|
1 | 16.7% |
Spain
|
1 | 16.7% |
List of Bollard Products
3 products are listed.
Sanoyas engineering Co., Ltd.
SP400 high -quality ballads that protect infrastructure and life of people from threats such as rush terrorism and violence by ⾞
■ Overview ・ This is a ballad for terrorism that supports collisions with a total weight of 7,500 kg (about medium -sized trucks) running at 64 km...
Sanoyas engineering Co., Ltd.
SPTT high -quality ballads can be constructed with a shallow basic depth by the unique two -stage storage design
■ Overview ・ This is a ballad for terrorism that supports collisions with a total weight of 7,500 kg (about medium -sized trucks) running at 64 km...
Sanoyas engineering Co., Ltd.
Ideal for important facilities that require strong vehicle entry terrorism SP1000 high -quality bollards
■ Overview ・ This is a terrorist ballard that supports collisions with a total weight of 7,500kg (about medium -sized trucks) running at 80 km / h...
