All Categories
This section provides an overview for red brass as well as their applications and principles. Also, please take a look at the list of 33 red brass manufacturers and their company rankings. Here are the top-ranked red brass companies as of December, 2024: 1.Lewis Brass & Copper Co., 2.ASC Engineered Solutions, LLC, 3.Marmetal Industries, LLC.
Table of Contents
Red brass, an alloy of zinc and copper, has a lower zinc content than regular brass. Typically, red brass refers to alloys with a zinc content ranging from 3% to 20%, characterized by their reddish color and softness. Alloys with about 10% zinc are known as red brass, while those with around 15% zinc are referred to as gold brass.
The color of the alloy becomes more reddish, termed "red-copper color," as the zinc content decreases. At approximately 10% zinc, the color shifts to yellowish-red, and at around 20% zinc, it takes on a light orange hue.
Softer and more malleable than standard brass, red brass is commonly used in building materials, ornaments, and jewelry, leveraging its distinctive reddish appearance. Its color varies with the zinc content.
Red brass is also popular in brass bands and other brass instruments. This preference is not just due to its aesthetically pleasing color but also because of its corrosion resistance, workability, and sound retention qualities.
Red brass shares basic properties with brass, including good tensile strength, ductility, and electrical conductivity. It is more resistant to rust compared to steel. However, due to its lower zinc content, red brass is softer and less suited for applications that require hardness. It offers superior ductility and drawability compared to regular brass.
An important feature of red brass is its light red color, attributed to its higher copper content, making it similar in appearance to copper. This quality makes it a favored choice for ornamental uses. While red brass has a certain level of corrosion resistance, it can oxidize and form bluish-green verdigris, similar to pure copper, when exposed to oxygen. Therefore, despite its aesthetic appeal, it requires more maintenance than compared to highly corrosion-resistant materials like stainless steel.
*Including some distributors, etc.
Sort by Features
Sort by Area
ASC Engineered Solutions is based in Waynesboro, Pennsylvania. ASC serves the mechanical & plumbing systems, commercial & residential, mining, food & beverage, industrial, fire protection, oil & gas, energy & power, and water & wastewater industries as a procure and repair servicer. ASC is ISO 9001:2015 certified. A sample of ASC’s offerings include fire protection & fabrication products such as fabrication equipment and seismic bracing, flow control such as commercial& residential valves, performance products such as engineered pipe supports & snubbers, pipe joint systems such s grooved and high pressure fittings, as well as press products and support systems.
Detroit Nipple Works, Inc., established in 1934 and based in Detroit, United States of America, is a manufacturer and supplier of pipe nipples. The company manufactures pipes and tubes, pipe fittings, flanges, valves, and pipe couplings. It also produces national aviation pipe tapers, backing rings, and pipe hangers. The products can be used to connect other pipes or hoses together. The company sells its products domestically and also imports to various parts of the world.
Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.
Phoenix Wire Cloth, Inc., established in 1885 and based in Troy, MI, USA, is a manufacturer and supplier of wire mesh alloys and safety systems. The company's product range includes stainless steel, plain steel, galvanized steel, aluminum, and brass wire mesh alloys. These products find applications in ventilation, lighting, and open mesh construction. It serves sectors like robotic guarding, machine guarding, NAAMS fencing, and railing & guardrail infill panels. The company's services highlight strengths such as maximum air circulation, ideal light diffusion, adaptability, and cost-efficiency derived from manufacturing.
Leitelt Brothers, Inc. established in 1908 and based in Chicago, IL, USA, is a seasoned manufacturer and supplier of metal sand castings. The company's product range includes aluminum sand castings, brass sand castings, bronze sand castings, non-ferrous castings, and specialty alloys upon request. These components are used in various applications and have been crafted with precision and expertise. It serves industries such as mining, marine, rolling mill, and architectural sectors. The company also provides services like green sand molding, air set molding, in-house machining, and weldment conversion.
Sioux Chief Manufacturing Company has been a manufacturer and distributor of plumbing and rough plumbing products since 1957 based in the USA. The company manufactures plumbing fittings, pipe supports, drainage solutions, and other rough plumbing components. Its products are designed for both residential and commercial plumbing systems. The company also adapts to the evolving needs of its clients by introducing new and advanced products to improve plumbing system performance, efficiency, and ease of installation. Additionally, the company offers various water control products that help regulate and control water flow and pressure within plumbing systems.
Midland Industries, is a manufacturing and distribution company of MAF/USA brass fittings, valves, clamps, tubing and plumbing accessories, headquartered in Kansas City, Missouri, the United States. The company’s product portfolio includes MAF/USA brass fittings, valves, clamps, tubing and plumbing accessories, etc., catering to a diverse set of industries. It represents consolidated companies including Anderson Metals, Midland Metal Mfg., Buchanan Rubber Ltd., Mid-America Fittings, and Stainless Adapters brands. As an OEM partner, it can help the distributor work with Original Equipment Manufacturers and specify solutions in order to make informed purchasing decisions around technology, applications and relevant specification requirements.
AVIVA Metals, headquartered in the United States, is a supplier company specializing in the distribution of copper, bronze, and brass alloys established in 1998. The company's product portfolio includes copper sheets, bronze tubes, and brass bars, meeting different requirements of their customers with huge inventories. Their production and inventories consists of tubes, hollows, hexagons, wires, and made-to-order shapes for customer specific applications. They are a major USA alloy manufacturer and distributor of over one hundred different grades of copper alloys in excess of 5000 metric tons.
Euro Tool, Inc., established in 1979 and located in Grandview, Missouri, US, is a distributor in the jewelry arts trade. The company is a primary jewelry, hobby, and craft distributor. It specializes in distributing precision hand tools, equipment, and supplies for various trades, including jewelry, watchmaking, lapidary, bead stringing, electronics, and beauty. Its product line includes pliers, files, cutters, hammers, and other precision tools and equipment. Euro Tool, Inc. is a source of quality merchandise in the industry.
Atlas Bronze was established in 1994 in Trenton, New Jersey. The company is a US brass bronze supplier that is operated by Maranatha Now, Inc. Its products are bronze, copper, iron, self-lubricated bushings, and wear plates. They are available in custom and standard sizes, including solid diameters, cored bars, plates, and rectangle blocks. Atlas Bronze’s products are applied in multiple areas, such as the aerospace, architectural, manufacturing, energy, and defense industries. Commonly, they’re found as gear bearings, joints, marine equipment, pipes, and railroad parts.
Lewis Brass & Copper Co., established in 1957 and located in Middle Village, New York, is a distributor of brass and bronze tubing. The company’s diverse range of products includes tubing, tees, ornamental rods, cap rails, and copper alloys. These products are used for plumbing systems to connect pipes, in art and décor, in manufacturing processes to create precise components, and in providing both functional support and an aesthetic finish to staircases and balconies. The company caters to industries such as construction, manufacturing, plumbing, architectural and construction, and engineering.
Marmetal Industries, LLC, since 1965, is a manufacturer and supplier of corrosion-resistant products and components made from non-ferrous metals and alloys based in Hatboro, Pennsylvania. The company supplies products and components such as metal plates, sheets, rods, and tubes made from copper nickel, bronze, brass, and their alloys. It serves the architecture, power generation, ship building, defense, and manufacturing industries by offering CNC machining, turning/drilling/milling, sawing, shearing, heat treating, and non-destructive testing services.
Farmers Copper Ltd., based in the United States, is a major supplier of copper, brass, and bronze metals since 1920. The company's extensive product range includes copper tubing, brass fittings, and bronze alloys, meeting the specific needs of their customers in industries such as manufacturing, construction, and marine. They also provide the raw copper alloy materials in different standard shapes as well as custom cut copper alloys. They offer machining and cutting services on all of their materials including brass, copper, stainless steel, ductile iron and more.
Rajhans Metals Pvt. Ltd., founded in 1988 and located in Jamnagar, India, is a manufacturer of alloy extrusion. The company offers a range of products that include rods and bars, wires, hollows, ingots, and billets. These alloy extrusion products have general uses across industries such as manufacturing, construction, automotive, electrical and electronics, and aerospace. The company’s products are used in applications because of its strength, such as corrosion resistance and malleability, which meet the specific requirements of customers in different sectors.
Metal Care Alloys Private Limited is a manufacturer and exporter of copper based alloys ingots and aluminum alloys ingots established in 2015 and headquartered in Mumbai, India with an additional factory in Mahashtra, India. The company’s product portfolio comprises eco brass, feder, aluminum, master, and brass alloys manufactured in compliance with various international standards including DIN, JIS, ASTM, SAE, and UNI. These products are used in the chemical industry, heat exchangers tubes, chemical equipment, and hardware.
Shree Extrusions Limited, established in 1989, is a company headquartered in Gujarat, India, and it operates as a manufacturer specializing in producing copper alloy tubes, brass rods, and brass tubes. The use of advanced technology, such as spectrometers and electronic and computerized UTM, enables the production of items of unique quality on a global scale. The comprehensive array of items provided by the company is esteemed for its outstanding performance, extended lifespan, cost-effectiveness, and robust tensile strength. Various goods are manufactured by utilizing premium-quality raw materials, including virgin non-ferrous metals, wastes, and turning materials.
Matco-Norca Inc., founded in 1980 with headquarters in Brewster, New York, USA, is a manufacturer and distributor of valves, fittings, and related plumbing specialties. The company's product line includes low-pressure valves, aerators, flanges, faucets, tankless water heater kits, and washing machine valves. These products are used in residential and commercial plumbing, water heating, and appliance products. It also offers industrial valves, fittings, and nipples, and other accessories. The company primarily serves wholesalers of plumbing fixtures used in residential, commercial, and industrial applications.
San-Etsu Metals Co., Ltd., founded in 2011 in Tonami-shi, Toyama, Japan, is a manufacturer and supplier of brass products. Its product line encompasses lead-free and low lead brass, brass rods, dezincing-resistant rods, and more. Utilizing bismuth in lieu of lead, its BZ series offers high strength, corrosion resistance, and non-magnetic properties equivalent to traditional materials. Its products find applications in electric, electronic, and automobile component machining. The company's adherence to environmental standards is evident through its ISO 14001 certification, emphasizing international environmental management compliance.
Concast Metal Products Co. is a manufacturer of cast copper alloys, based in Pennsylvania, USA. Established in 1980, the company specializes in continuous casting, a process that allows for the production of consistent copper alloys with mechanical properties. The company offers an extensive portfolio of alloys, including various bronze, brass, and copper alloys, each designed to excel in specific applications across diverse industries. The company caters to a wide range of industries including aerospace, automotive, electrical, marine, oil and gas, and industrial.
The Company operates diverse businesses, ranging from nonferrous metals and other fundamental materials to cemented cardide tools/metalworking solutions, the manufacturing of semiconductor-related and electronic components/materials, resource recycling, and renewable energy power generation. In each business, the Company holds the No.1 position in production volume, sales volume, etc.
Mitsubishi Materials Corporation, established in 1950 and headquartered in Tokyo, Japan, operates as a materials manufacturer. The company engages in cement, metals, energy, and recycling business. Its automotive product line includes engine parts, drive system components, onboard and exterior materials, and electronics for hybrid, electric (EV), and fuel cell vehicles. The company operates in compliance with ISO 9001 and ISO 14001 quality assurance management guidelines. Its products find ideal applications in automobiles, household facilities, and electronics industries.
Industrial Metals Incorporated, established in 1987 and based in Minneapolis, United States is a distributor of metals such as steel, aluminum, copper, titanium, and copper. The company supplies all metals to meet the needs of structural erectors, machine shops, tool & die shops, prototype shops, and contractors. All its customers are based in different locations, such as Sweden, Jamaica, Italy, the United Kingdom, and Australia. The company procures the metals from different suppliers worldwide and can be used in different industrial applications.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Lewis Brass & Copper Co. |
7.3%
|
| 2 | ASC Engineered Solutions, LLC |
6.0%
|
| 3 | Marmetal Industries, LLC |
5.3%
|
| 4 | PIPE DECOR |
4.6%
|
| 5 | Detroit Nipple Works, Inc. |
4.6%
|
| 6 | BENDER-Armaturen GmbH & Co. KG |
4.0%
|
| 7 | Midland Industries |
4.0%
|
| 8 | Bengs Modellbau |
3.3%
|
| 9 | Leitelt Brothers, Inc. |
3.3%
|
| 10 | Sioux Chief Manufacturing Company |
3.3%
|
Derivation Method
The ranking is calculated based on the click share within the red brass page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
15 | 65.2% |
|
India
|
6 | 26.1% |
Germany
|
1 | 4.3% |
United Kingdom
|
1 | 4.3% |
2 products are listed.
