19 Traveling Crane Manufacturers in 2024
This section provides an overview for traveling cranes as well as their applications and principles. Also, please take a look at the list of 19 traveling crane manufacturers and their company rankings. Here are the top-ranked traveling crane companies as of November, 2024: 1.Columbus McKinnon Corporation, 2.VINCA Equipos Industriales, 3.Arnikon.
Table of Contents
Categories Related to Traveling Cranes
Engaged in research on nitride semiconductor growth using the MBE method at Waseda University Graduate School. After graduating from graduate school in 2016, he joined a non-ferrous metal manufacturer.
Engaged in equipment maintenance and engineering work at metal smelting plants. Moved to a chemical manufacturer in 2022. Engaging in similar tasks.
What Is a Traveling Crane?
Traveling cranes are cranes for lifting and unloading that are installed on the ceiling of buildings such as warehouses.
A runway is a structure with beams and rails on which the crane can travel. Traveling cranes are equipment that carry suspended loads while traveling along this runway. Traveling cranes are usually installed along both side walls of a building.
Traveling cranes are capable of three movements: traveling, traversing, and hoisting. This makes it possible to move the crane hook three-dimensionally, enabling the crane to move suspended loads anywhere in the building.
Uses of Traveling Cranes
Traveling cranes are used in all kinds of industrial and commercial applications. Specific applications include the following:
- For lifting and unloading in automated warehouses and large warehouses
- Maintenance of large equipment such as turbines and generators
- For loading and unloading products at electrodeposition plating plants
- For loading and unloading intermediate products in metal refining plants
Principle of Traveling Cranes
Traveling cranes consist of a power feeder, girder, saddle, trolley, power unit, and wire hook block.
1. Power Feeder
Traveling cranes are mostly powered by electricity. Power feeders that supply electricity to moving traveling cranes are mainly curtain cables or pantographs. A curtain cable is a cable that hangs down like a curtain.
The relay point is supported by a pulley, and the pulley runs and absorbs expansion and contraction as the crane travels. It is used in small-scale cranes with short travel distances and small lifting loads.
A pantograph consists of a sliding stone and a spring, and electricity is supplied when the sliding stone makes contact with a conductor to which voltage is applied. It is applied to traveling cranes and large cranes that move at high speeds.
2. Girder
A girder is a structure that supports the entire crane. Since it is subjected to the load of the suspended load, it must be strong enough to withstand the maximum load. Therefore, the girder is designed to have the optimum shape and structure according to the length and load.
Simple traveling cranes use I-shaped steel, and as the lifting load becomes heavier, they are reinforced with angle or truss structures.
3. Saddle
The saddle is the driving part to which the wheels are attached for traveling on the runway. Wheels strong enough to support the girder are selected.
Depending on the runway structure, saddles are manufactured in a shape that hangs from the I-beam or runs on rails. If there is a risk of contact with walls or other surfaces at the end of the runway, cushioning material or the like is attached.
4. Trolley
A trolley is a cart that traverses on the girder together with hook blocks and wires. The structure differs depending on the type of traveling cranes, and some traveling cranes have a driver's seat attached to the trolley.
5. Power Unit
The power unit is the power unit that allows the crane to operate. Most traveling cranes consist of a motor and a reduction gear. For motors, wire-wound motors are used for variable speed operation. In recent years, a combination of an inverter and a cage-type induction motor is commonly used.
The power required for the power unit increases in the order of hoisting, traveling, and traversing. The hoisting power unit lifts the load by hoisting a steel wire or hook block. The hoisting power unit is equipped with a brake to prevent the load from falling under its own weight. Smaller traveling cranes may use a human-powered chain block as the traversing/traveling drive unit.
Types of Traveling Cranes
Traveling cranes are divided into several types according to their construction.
1. Hoist Traveling Cranes
Traveling cranes use a hoist as the hoisting device. Since an off-the-shelf hoist can be used, the crane can be installed at a low cost. Traveling cranes are used as relatively small overhead cranes.
2. Club Trolley Type Traveling Cranes
Traveling cranes using a club trolley with hoisting and traversing devices. This type of crane is used for larger cranes than the hoist type. They are characterized by their robustness and ease of maintenance. However, they are more expensive than hoist-type cranes because they are individually designed according to the installation space and required capacity.
3. Rope Trolley Type Traveling Cranes
Traveling cranes are rope-driven overhead cranes with a trolley that does not have a traversing or hoisting device. The trolley itself is simple to build, so the overall crane weight can be reduced. However, it has the disadvantage of rapid deterioration over time due to rope wear.
List of 19 Traveling Crane Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Austria
- China
- India
- Japan
- Lithuania
- Switzerland
- Turkey
-
-
-
Columbus McKinnon Corporation
Double girder overhead travelling crane
Manufacturer Overview
Columbus McKinnon Corporation, founded in 1875 and headquartered in Charlotte, North Carolina, is a manufacturer of intelligent motion products used for automation, conveyance, lifting, and linear motion. Its product range includes handheld transmitters, flexible chain conveyors, lever hoists, industrial linear actuators, and pallet systems used in several industries, including aerospace, entertainment, automotive, metals production, and pharmaceutical. The company is ISO 9001 certified and has manufacturing facilities across Africa, Asia, Europe, Latin America, and North America. It has several brands, including STAHL Crane Systems, Dorner Conveyors, Duff-Norton, Magnetek, and Unified Industries.
-
-
-
-
-
Terex Corp.
ROUGH TERRAIN CRANES
Manufacturer Overview
Terex Corp. established in 1933 and based in Norwalk, Connecticut, USA, is a manufacturer and distributor of machinery and equipment essential for infrastructure development. The company's product range includes Terex mobile cranes, Powerscreen crushing and screening equipment, Fuchs material handlers, Terex utility aerial devices, and Genie telehandlers. These products are pivotal for constructing and maintaining the world's infrastructure, from major construction projects to utilities maintenance. Serving industries like machinery manufacturing, infrastructure development, material handling, and recycling, its services include equipment financing, support for government and military projects, and offering merchandise.
-
-
-
-
-
Shannahan Crane & Hoist
Wall Traveling Crane
Manufacturer Overview
Shannahan Crane & Hoist, established in 1961 and located in Saint Louis, Missouri, is a designer, manufacturer, and installer of weight-testing equipment. The company offers equipment such as bridge cranes, jib cranes, gantry cranes, gorbel workstation cranes, and gorbel intelligent lifting devices. It provides crane inspection and preventive maintenance, crane repair services, load testing, operator safety training, engineering design, and crane fabrication services. It serves aerospace, automotive, paper, plastic injection, die handling, steel, and foundry industries.
-
-
-
-
-
Crane Equipment & Service
Wall Traveling Crane
Manufacturer Overview
Crane Equipment & Service Inc, founded in 1917, is a noticeable manufacturer of Overhead Cranes and Jib Cranes the company is headquartered in Eureka, Illinois, and has established itself as one of the oldest and largest entities in its business. The company's primary attention revolves around the construction, design, installation, and maintenance of overhead crane lifting systems. These categories encompass bridge cranes, Jib cranes, and monorails. The company collaborates closely with its clients to identify and develop appropriate solutions for their requirements.
-
-
-
-
-
HOOSIER CRANE SERVICE COMPANY
OVERHEAD BRIDGE CRANES
Distributor Overview
Hoosier Crane Service Company, founded in 2002, is a family business founded in Elkhart, Indiana, serves as a supplier and service provider in the field of cranes and hoists. The company's headquarters in Elkhart reflects its strong influence in the industry. Hoosier Crane specializes in offering a range of solutions including new bridge cranes, overhead crane kits, electric chain hoists, wire rope hoists, parts, and accessories. With a customer satisfaction, the company upholds its honesty, a strong work ethic, and personalized attention, ensuring the fulfillment of its clients' needs in the crane and hoist sector.
-
-
-
-
-
GIS AG
CRANE SYSTEMS
Manufacturer Overview
GIS AG, established in 1957 and headquartered in Luzern, Switzerland, is a manufacturer of crane systems and lifting solutions. The company's products include electric chain hoists, overhead traveling cranes, and vacuum handling systems for transport, woodworking, and machinery engineering industries. Its electric chain hoists are used for lifting and moving loads in industrial and entertainment settings, while overhead traveling cranes facilitate the movement of heavy materials across large spaces. The company also offers project planning, assembly, and maintenance services. GISspares is its online platform for ordering original spare parts for electric chain hoists and trolleys.
-
-
-
-
Manufacturer Overview
Arnikon, founded in 2013 and based in Konya, Turkey, is a manufacturer of custom-designed process cranes and is ISO 9001, ISO 45001, and ISO 10002 certified. Its product portfolio includes overhead, gantry, and process cranes, and it also sells crane kits and spare parts. It makes several types of process cranes, which include shaft process, smart, and hydropower cranes, and it has done over 7500 crane assemblies. The company’s products are used in sectors such as steel processing, machinery manufacturing, and hydroelectric plants, and the company exports to over 50 countries.
-
-
-
-
-
VINCA Equipos Industriales
Double Girder Crane
Manufacturer Overview
VINCA Equipos Industriales, established in 1975 and based in Barcelona, Spain, is a manufacturer and supplier specializing in industrial equipment for the movement of loads. The company's product portfolio includes light overhead cranes, electro-hydraulic forklifts, and industrial trolleys. These products are used in various industries, including automobile, aerospace, and the food industry. The company provides services including installation, maintenance, and product customization based on customer requirements and specifications. The company is ISO 9001:2015 certified for its quality management system.
-
-
-
-
-
KITO Corp.
Overhead Traveling Crane
Company Overview
KITO Corp., established in 1932, is a manufacturer and supplier of various types of lifting equipment headquartered in Nakakoma-gun, Yamanashi, Japan. The company’s product portfolio comprises electric chain hoists, lever blocks, belt lashing, manual chain blocks, and electric chain balancers. The company also offers hoist peripheral equipment such as crane systems, slings, Overhead crane/bridge crane, and hanging equipment. These equipment offer material handling solutions in transportation, construction, civil engineering, shipbuilding, and forestry industries.
-
-
-
-
-
AB CRANBALT
overhead traveling cranes
Company Overview
AB CRANBALT, a company founded in 1966, based in Šiauliai, Lithuania is a manufacturer and distributor specializing in professional lifting machines and auxiliary equipment. The company's range of products includes bridge cranes, gantry cranes, jib cranes and lightweight cranes. The company also provides components and beams for cranes, serving various industrial and construction applications across industries. AB CRANBALT is an authorized dealer of Terex Corporation, specializing in both the hire and manufacture of industrial cranes and steel structures in the Baltic and Nordic markets.
-
-
-
-
-
PALFINGER MARINE
Traveling Cranes
Company Overview
Palfinger Marine, part of the Palfinger Group, established in 1992 and headquartered in Salzburg, Austria, is a manufacturer and supplier of deck equipment and lifesaving appliances. The company's products include wind cranes, lifting and handling equipment, and offshore passenger transfer systems. Its marine, offshore, and wind cranes are used for lifting heavy loads and facilitating cargo handling operations, and its davits and slipway system enable the safe launch and recovery of boats and lifeboats. The company's products are used in oil and gas, merchant cargo, and aquaculture sectors, and it provides inspection, maintenance, and spare parts services.
-
-
-
-
-
Aimix group
Overhead Traveling Crane
Company Overview
Aimix Group, established in 2010 and headquartered in Zhengzhou, China, is a manufacturer and supplier of lifting machinery and construction equipment. The company specializes in overhead cranes, port machinery, and mining equipment. Its products include 1-ton to 100-ton overhead cranes, available with various operation methods like wired, wireless, and driver-controlled. Its overhead cranes include single and double girder, light and heavy-duty, and electric and workstation cranes for indoor and outdoor use. The company's cranes are suitable for warehouses, factories, and workshops. It has earned over 300 awards, including Machine 100 China and National Quality Management Advanced Enterprise.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
BVS Bülbüloğlu Vinç San. Tic. A.Ş.
Travelling Cranes
-
-
-
-
-
Sayal Makina
Double Girder Overhead Travelling Cranes
-
-
Traveling Crane Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Columbus McKinnon Corporation |
22.2%
|
| 2 | VINCA Equipos Industriales |
11.1%
|
| 3 | Arnikon |
11.1%
|
| 4 | mm engineers private limited |
11.1%
|
| 5 | PALFINGER MARINE |
11.1%
|
| 6 | AB CRANBALT |
11.1%
|
| 7 | Terex Corp. |
11.1%
|
| 8 | HOOSIER CRANE SERVICE COMPANY |
11.1%
|
Derivation Method
The ranking is calculated based on the click share within the traveling crane page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- PALFINGER MARINE: 11,733
- KITO Corp.: 687
Newly Established Company
- R.S Engineering Works: 2017 (7 years ago)
- Arnikon: 2013 (11 years ago)
- Sahjanand Engineering Pvt. Ltd.: 2005 (19 years ago)
Company with a History
- PALFINGER MARINE: 1932 (92 years ago)
- KITO Corp.: 1944 (80 years ago)
- GIS AG: 1957 (67 years ago)
Traveling Crane Manufacturers in United States
*Including some distributors, etc.
- Columbus McKinnon Corporation
- Terex Corp.
- Shannahan Crane & Hoist
- Crane Equipment & Service
- HOOSIER CRANE SERVICE COMPANY
Global Distribution of Traveling Crane Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
5 | 31.3% |
India
|
5 | 31.3% |
Switzerland
|
1 | 6.3% |
Turkey
|
1 | 6.3% |
Japan
|
1 | 6.3% |
Lithuania
|
1 | 6.3% |
Austria
|
1 | 6.3% |
China
|
1 | 6.3% |
List of Traveling Crane Products
3 products are listed.
Miyake AB
Cylinder type balance whistle in the winding drum
20+ people viewing
The inside of the winding drum is a cylinder format, and the winding drums rotate while rotating due to the supply and exhaust of compressed air. I...
