59 Funnel Manufacturers in 2024
This section provides an overview for funnels as well as their applications and principles. Also, please take a look at the list of 59 funnel manufacturers and their company rankings. Here are the top-ranked funnel companies as of November, 2024: 1.UDY Corp., 2.Superfit Continental Private Limited., 3.T & T Manufacturing, LLC..
Table of Contents
Okayama University Graduate School, Ph.D. (Agriculture). After working as a specially appointed Assistant Professor at Tokyo Medical and Dental University, a fluid researcher at the Okayama Prefectural Institute of Biological Sciences, and a special researcher (JSPS PD) at the Japan Society for the Promotion of Japan Science, he became independent as a freelancer.
Specializes in natural product chemistry, protein engineering, fermentation engineering, and instrumental analysis of chemicals (especially mass spectrometry chemistry).
Thesis: https://pubmed.ncbi.nlm.nih.gov/?term=HIROKAZU+USUKI
linkedin: https://www.linkedin.com/in/%E5%8D%9A%E4%B8%80-%E8%87%BC%E6%9C%A8-b83827228/
What Is a Funnel?
A funnel is a device used to transfer liquid from one container to another.
It is mainly used in chemical experiments. The most common and familiar example is a glass funnel. Its shape is an inverted triangle with a wide opening at the top and a narrower opening at the bottom. At the bottom end is a thin tube.
Uses of Funnels
Funnels are used in two main ways: First, they are used to move liquids. Pouring a liquid directly from one container to another may cause spillage. This is fine for water or other liquids, but for hazardous liquids, a problem arises.
The second use is to separate liquids and solids in suspension. The funnels are lined with filter paper, and liquid with solids dispersed in it is poured through the filter paper and down the narrow tube of the funnels. Meanwhile, the solids remain on the filter paper and can be separated from the liquid.
Principle of Funnels
The principle of funnels depends on the type of funnel. Typical funnel principles are as follows:
1. Separation of Solid and Liquid Using a Glass Funnels
To separate solids and liquids using a glass funnel, filter paper is first placed in an inverted triangular funnel made of glass. By pouring a suspension of solids through the opening of the funnel, the insoluble material is obtained as a residue on the filter paper, while the liquid passes through the filter paper and is separated as a filtrate.
Solid-liquid separation with glass funnels is the simplest example of funnels used for separating solids and liquids, and many of you have used it in elementary school science experiments.
2. Separation of Two Liquids Using Separating Funnels
To separate two liquids using separating funnels, first pour a mixture of two unmixed liquids into the eggplant-shaped container of the separating funnels and allow it to stand still. The upper layer contains a solution of low specific gravity (e.g., oil) and the lower layer contains a solution of high specific gravity (e.g., water), which are clearly separated as two liquids.
The two liquids can be separated by opening the bottom cock and removing only the lower layer.
3. Separation of Solids and Liquids Using Buchner Funnels
At the opening of the Buchner funnel, a circular filtration plate with numerous pores is installed. A filter paper is placed in the circular section, and a suspension of dispersed solids is poured through the opening of the Buchner funnel.
In many cases, the suspension to be poured is one that is difficult to separate from the solid and solution in a normal glass funnel due to its high viscosity or other reasons. For this reason, Buchner funnels are installed in a special device called a suction filtration bottle, and the separation operation is performed by pulling off the solvent by suction with an aspirator.
Filtration using an aspirator is called suction filtration or decompression filtration. Its advantage is that the filtration operation is completed in a shorter time compared to natural flow.
Types of Funnels
There are various types of separation funnels used in chemical experiments, depending on the application. Three types of funnels in particular are often used: glass funnels, separating funnels, and Buchner funnels.
1. Glass Funnels
Glass funnels are used to separate solid and liquid components in a suspension. Glass is the most common material for this type of funnels because of its resistance to organic solvents, which are often used in chemical experiments. A filter paper is laid over the inverted triangular opening.
2. Liquid Separating Funnels
Separating funnels are used to separate two unmixed liquids.
A cock is attached to the glass tube to allow the liquid to flow down, and by opening the cock, the liquid can be passed through and taken out.
3. Buchner Funnels
The Buchner funnels are used to quickly filter suspensions containing large amounts of solids or suspensions with high viscosity. It is made of porcelain, which is resistant to organic solvents and is used by setting it in a suction filtration bottle. In synthetic organic chemistry experiments, Buchner funnels are often used to separate large amounts of crystals from the solvent in a short time.
Other Information on Funnels
Funnel Materials and Precautions for Use
Funnel materials vary widely, including plastic, stainless steel, and glass, and should be selected according to the chemical properties of the liquid to be dispensed.
For example, in many chemical experiments, organic solvents are used that are highly reactive with plastics, so glass funnels with excellent resistance to organic solvents are used.
List of 59 Funnel Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Germany
- India
-
-
-
MicroStrain, a LORD Company
Fuel Filter Funnel
Manufacturer Overview
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
-
-
-
-
-
Wesco Industrial Products, LLC.
Funnels
Manufacturer Overview
Wesco Industrial Products, LLC was founded in 1948 and is based in Philadelphia, PA, as a manufacturer of material handling equipment, appliance trucks, platform trucks, pedal lifts, and lift tables. Wesco designs and manufactures plastic box carts, U-boats, service carts, wood dollies, and, shelf carts, along with machinery movers, and scissor lifts that have applications in Welding, Automobile, Construction, and Transportation industries. They also provide Dock & Shipping equipment including universal strapping trucks, poly strapping systems, strap cutters & easy mount strip doors that have applications in Marine, Electronic appliances manufacturing, Mining, and, Aerospace industries.
-
-
-
-
-
Vollrath Manufacturing Services
Funnels
Manufacturer Overview
Vollrath Manufacturing Services was established in 1874 in Sheboygan, WI, and is an integrated solutions manufacturer for wholesale food service products, medical products, and advanced cleaning products and solutions. The company’s portfolio includes foodservice equipment, smallware, and components, such as bed pans, and griffin-style breakers. It utilizes virtual reality solutions for customers to offer an immersive experience, allowing them to visualize and interact with the company's products before purchasing. The company is ISO 9001:2015-certified and accredited by the Underwriters Laboratory, CSA Group, and other certifying bodies.
-
-
-
-
-
UDY Corp.
Funnels
Manufacturer Overview
UDY Corp. was established in 1995 and is headquartered in Colorado, United States is a manufacturer of scientific equipment. The company offers an array of products including Udy cyclone sample mills, Udy protein test systems, and custom plastic fabrication among others. It extends services like installation of the equipment and full manufacturer’s warranty for the repair and maintenance of the products. These products find applications in scientific laboratories, hospital laboratories, and in quality assurance facilities.
-
-
-
-
-
T & T Manufacturing, LLC.
Funnels
Manufacturer Overview
T&T Manufacturing was founded in 1977 and is headquartered in Spooner, Wisconsin. The company is a member of the Bretting family of companies which also includes Absolut. While Absolut design, manufactures, and build paper bag machinery and converting equipment, T&T is a designer, manufacturer, and builder of all types of fixtures for industrial applications, specialty machinery, and engineered wood equipment. The company’s product line includes conveying equipment, lift & turns, production machinery, and weld fixtures. The company also provides design, engineering, field service, training, and individual OEM & replacement parts such as custom machinery and engineered wood equipment.
-
-
-
-
-
Stainless Solutions LLC
Funnels
Manufacturer Overview
Stainless Solutions CIP, established in 2002 and located in Cincinnati, Ohio, USA, is a manufacturer and supplier of quality stainless steel equipment for clean-in-place applications. The company’s stainless steel equipment include CIP tanks, CIP systems, spray balls, and fittings. These products are designed to ensure effective and efficient cleaning in their application processes and are used in various industries including food & beverage, pharmaceuticals, and cosmetics. The company continues to provide cutting-edge solutions that meet the hygiene and sanitation needs of different industries.
-
-
-
-
-
R/J Florig Industrial Co., Inc.
Funnels
Manufacturer Overview
Florig Industrial Company, inc. was founded in 1975 and is headquartered in Conshohocken, Pennsylvania. The company is an industrial and architectural component manufacturer serving the construction, aerospace, manufacturing, and other industries. The company utilizes services such s rolling & bending to fabricate bars, beams, pipes, and extrusions. Other manufacturing capabilities include shearing & forming, tooling & machining, and cutting via laser, plasma, water jet, and burning. The company provides engineering, design, testing, repair, and equipment rebuilding services.
-
-
-
-
-
-
-
Petit CNC a Div. of Petit Tool
Funnels
Manufacturer Overview
Petit CNC, a division of Petit Tool founded in 1963, is a Computerized Numerical Control (CNC) machine shop that fabricates precise parts and assemblies for various commercial, defense, medical, technological, and textile applications. The business works with various materials, including composite materials, steel, brass & copper, and various unique alloys. The Thomaston, CT-based company provides capabilities such as CNC milling, quality control, and product management, and is ISO 9001:2015 certified, and ITAR registered.
-
-
-
-
-
NDS Technologies, Inc.
Funnels
Manufacturer Overview
NDS Technologies, Inc. was founded in 1990 with corporate headquarters in Vineland, New Jersey. The company is a developer, designer, and manufacturer of high-quality specialty glassware, plastic, and related products for scientific use in industry, government, and education. The company provides customer support, engineering, and manufacturing services to all customers and partners. The company provides a complete line of products from arsine generators to flasks to vials. The company offers manufacturing capabilities in many varieties of components such as chromatography, machining, and opto-electronics.
-
-
-
-
-
Micromold Products, Inc.
Funnels
Manufacturer Overview
Micromold Products was established in 1954 and headquartered in Yonkers, New York. The company is a manufacturer of a broad line of corrosion-resistant plastic products, specifically Kynar, polypropylene, nylon, and Kel-F, for process industries. The company has developed proprietary manufacturing processes for PTFE and PFA machined parts and weldments. The company’s product line includes a complete line of dip pipes, sparges, valves, strainers, and piping systems. The company makes a full line of CNC machined parts for process industry OEMs including PTFE, PEEK, and UHMW polyethylene ball and butterfly valve seats, pump seals, and instrumentation components.
-
-
-
-
-
Magnation Water Technologies
Funnels
Manufacturer Overview
Magnation Water Technologies, headquartered in Oakland, California has been a manufacturer of physical water conditioning and correcting products since 2008. Some of its products include water treatment systems, magnetic water conditioners, and advanced water management solutions. These offerings improve water quality, increase efficiency in irrigation, reduce scaling and buildup in pipes and equipment, and promote more sustainable water usage across various industries and applications. Its products are chemical-free, energy-free and maintenance-free solutions.
-
-
-
-
-
International Crystal Laboratories
Funnels
Manufacturer Overview
International Crystal Laboratories, ICL, was founded in 1962 and is based in Garfield, New Jersey. ICL serves the spectroscopy, applied spectroscopy, and analytical chemistry industries and end users. ICL’s product categories include transmission windows & optics, FTIR calibration films, sample cards, powders, cuttings, IR, UV, optical spectroscopy sampling, laboratory presses, die sets, laboratory supplies, and spectro-optic lab supplies. Examples of ICL’s products include circular disks, magneto crystals, crystal cuttings for grinding, Gemini FTIR gas analysis cells, liquids, and solids, polishing kits, and laboratory grinding mills.
-
-
-
-
-
Helander
Funnels
Manufacturer Overview
Helander, established in Lombard, IL in 1936, is a manufacturer of CNC Machines as well as supplier of metal forming and fabricating services. Their product portfolio includes CNC Machines for milling and turning, stainless steel, carbon steel, aluminum and Inconel, used in industries such as HVAC for filtration & separation, medical for laboratory equipment, and vehicle components. The company also offers services that include customer support, quality control and customized services.
-
-
-
-
-
Foxx Life Sciences
Funnels
Manufacturer Overview
Foxx Life Sciences, founded in 2008, is a manufacturer and supplier of custom single-use systems (SUS) for use in biotech, life science, pharmaceutical, and diagnostic research. The company is headquartered in New Hampshire, USA, and runs branches in Londonderry, NH, and Hyderabad, India, where they have partnered with Ami Polymer, Abdos, and Borosil, who supply their products across the country. Their product line includes single-use systems such as tubings, glassware, bottles, filtration, and laboratory safety products. Foxx is ISO 13485 certified and an FDA Registered company.
-
-
-
-
-
Dynalab Corp.
Funnels
Manufacturer Overview
Dynalab Corp was founded in Rochester, New York in 1957. Together with its wholesale division, Dynalon Labware, Dynalab produces and distributes standard and custom-made scientific equipment and laboratory supplies across North America. Science equipment and sampling apparatus offerings include hygrometers, mailing point devices, rollers, water stills, powders, seals, various samplers, and drills. Some of Dynalab’s laboratory supplies include Azlon plastics, burn-up boxes, desiccators, hydrometers, pipettes, shields, stopcocks, tote boxes, tubing, and watch glasses.
-
-
-
-
-
Bermar Associates, Inc.
Funnels
Manufacturer Overview
Bermar Associates, Inc., based in Troy, Michigan, is a manufacturer, specializing in economical tooling and plastic parts since 1969. Their custom plastic injection molding capabilities, encompasses of high press tonnage molding for larger parts, over molding for enhanced product structure, and solid molding for solid parts. The company caters to various industries, including components, consumer products, and hardware. Additionally, they provide Master Wipe Way Wipers, which protect machines from corrosive fluids and sprays, ensuring optimal performance and longevity. Bermar Associates is ISO 9001 compliant, maintaining adherence to industry standards.
-
-
-
-
-
Becker Aviation
Funnels
Manufacturer Overview
Becker Aviation, founded in the year 1956, and based in Illinois, USA, is a manufacturer and supplier of aviation ground fueling equipment and accessories. Their product portfolio includes a diverse range of aviation materials such as fueling nozzles, fueling couplers and adapters, fuel filtration, quality control, bonding and grounding equipment, and fuel valves. The products are used in the aviation industry to ensure clean, fuel, and safe flights. The company offers products with technical qualifications from fuel quality to testing equipment.
-
-
-
-
-
Baker Sheet Metal Corp.
Funnels
Manufacturer Overview
Baker Sheet Metal Corporation, established in 1952 and located in Norfolk, Virginia, is a manufacturer of metal products, primarily for the marine industry. The company fabricatea from standard drawings or from customer requests, constructing out of stainless steel, aluminum, brass, and copper. Its product portfolio consists of shipboard products such as fire hose racks, and vertical ladders. It also supplies a wide range of Honeycomb custom stainless steel and hollow metal doors.
-
-
-
-
-
Ace Metal Spinning, Inc.
Funnels
Manufacturer Overview
Ace Metal Spinning, Inc. has been a manufacturer of metal parts since 1947. Headquartered in Illinois, USA, the company primarily specializes in metal spinning, a metalworking process that involves the formation of flat metal discs or sheets into cylindrical or conical shapes. This technique allows them to create various products, including metal domes and cones, decorative metalwork, and custom metal parts. Its metal domes and cones find applications in the aerospace, automotive, and lighting industries. Additionally, the company crafts customized metal parts to meet the specific needs of its clients. These parts can vary widely in size, shape, and complexity.
-
-
-
-
-
Thermo Fisher Scientific Inc.
Nalgene Büchner Two-Piece Polypropylene Funnels
Company Overview
Thermo Fisher Scientific Inc., founded in 1956 and headquartered in Waltham, Massachusetts, is a manufacturer and supplier of life science solutions, analytical instruments, specialty diagnostics, laboratory products, and biopharma services. Through its brand names, including Invitrogen, Fisher Scientific, Patheon, Applied Biosystems, and Gibco, among others, the company provides a wide range of products, which include chromatography systems, thermal cyclers, automated cell counters, fermenters, and DNA polymerases. The company’s annual revenue is over 40 billion USD, and it serves several fields, including customers working in clinical diagnostic labs, research institutions, hospitals, government agencies, and pharmaceutical/biotech companies.
-
-
-
-
-
Worldwide Bearings
Funnel King® Fluid Accessories
Company Overview
Worldwide Bearings & Components, LLC is a supplier of ceramic bearings based in Cedar Grove, New Jersey, and founded in 1994. The company specializes in supplying bearings to the powersports industry by providing ceramic bearings for motorcycles, ATVs, snowmobiles, go-karts, and watercraft. Products it supplies include engine bearings, transmission bearings, wheel bearings, and hybrid bearings. The company supplies bearings compatible with motorbikes and automobiles from major manufacturers including, Honda and Suzuki, and for all Nascar transmissions.
-
-
-
-
-
SaniSure, Inc.
Funnels
Company Overview
Sanisure, Inc. is a California manufacturer of custom single-use solutions such as bottles, bags, tubings and filters for bioprocessing applications. Founded in 2005, the company primarily serves clients within the medical, pharmaceutical, biotech and scientific research sectors. The company's specialized product lineup includes roller bottle systems for cell growth or harvesting, mixing and stirring solutions like gamma stable accessory kits for glass bioreactors, and various sanitary clamps, connectors, adaptors and process components. Aside from its North American operations, Sanisure, Inc. maintains a network of partner distributors in Latin America, Europe, and Asia.
-
-
-
-
-
MO Industries, Inc.
Funnels
Company Overview
MO Industries, Inc., established in 1979 and headquartered in Whippany, New Jersey, is a manufacturer and distributor of process equipment and material handling solutions. Serving diverse industries like pharmaceutical, food and beverage, chemical, and industrial, their product line includes stainless steel drums, plastic kegs, funnel cones, valves, lifting systems, and drum handling systems. These products play roles in storing, transporting, and processing various materials, while also finding applications in blending, filling, and packaging processes.
-
-
-
-
-
Metro Hydraulic
Funnels
Company Overview
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
-
-
-
-
-
McManus Drum Co. Inc.
Funnels
Company Overview
McManus Drum Co. Inc., established in 1965, and headquartered in Charlotte, North Carolina, is a distributor of cost-effective drums, containers & industrial products. The company's array of product offerings includes, steel, plastic and fibre drums, drum handling equipments, bulk containers and tools and accessories, while its services includes drum reconditioning and recycling services in which it caters to industries such as chemicals, food and beverage, pharmaceutical, paint and coatings, and industrial for storage, handling, and transportation of various materials.
-
-
-
-
-
Jensen Inert Products
Funnels
Company Overview
Jensen Inert Products was founded in 1988 and is headquartered in Coral Springs, Florida. Jensen Inert Products is a manufacturer and distributor of non-contaminating, chemically resistant products made of fluoropolymers, silicone, and other inert materials used in the analysis, sample collection, distillation, processing, and product storage for industries including pharmaceutical, medical, electronics, and aerospace industries. A sample of Jensen Inert Products product lines includes gloves, bottles, cap liners, tubing, and syringes. Jensen Inert Products offers custom die cutting of gaskets, liners, and other components of thicknesses depending on the material.
-
-
-
-
-
Elite Restaurant Equipment
Funnels
Company Overview
Elite Restaurant Equipment was founded in 2013 and headquartered in Newark, New Jersey. Elite Restaurant Equipment is a distributor of restaurant equipment and supplies. Refrigeration equipment includes reach in refrigerators, refrigerated prep tables, refrigerated display cases, merchandising refrigerators, and undercounter refrigerators. Commercial work tables include stainless steel work tables, butcher block work tables, and equipment stands. Commercial sinks include 1-3 compartment sinks, underbar sinks, and faucets. Some additional offerings include various shelves and shelving, exhaust hoods, fryers and ranges, steam tables, chairs, booths, and other restaurant furniture.
-
-
-
-
-
BrandTech Scientific, Inc.
Funnels
Company Overview
BrandTech Scientific was founded in 1996 and is headquartered in Essex, Connecticut. BrandTech Scientific supports laboratory sciences as a distributor for German-made supplies in Canada and the United States. BrandTech Scientific’s products include categories such as liquid handling including pipettes and instrumentation, life science such as PCR products and microplates, laboratory vacuum such as rotary vein pumps, lab support jacks, lab ware such as test tube racks, volumetric lab ware hardware and software, and lab rat gear, as well as offering vacuum pump selection guides.
-
-
-
-
-
Berlin Packaging
Funnels
Company Overview
Berlin Packaging, established in 1898 and currently a subsidiary of Oak Hill Capital Partners, is a Chicago-based American supplier, specializing in packaging solutions. With collaborations spanning more than 900 packaging manufacturers, the company offers a wide range of packaging products. It also specializes in decoration solutions through its Studio One Eleven design division, providing customized branding and packaging for enterprise clients. The company also provides services like repacking, inventory management, and warehousing. Moreover, its E3 consulting division aids companies in increasing business efficiency and profits. The company caters to diverse sectors, including chemical, food and beverages, pharmaceutical and nutraceutical, cosmetics, and automotive.
-
-
-
-
-
Andler Packaging Group
Funnels
Company Overview
Andler Packaging Group, founded in 1980, is a manufacturer and distributor of packaging and printing products such as plastic or glass bottles & jars, custom molds, corrugated boxes, foam & protective packaging, poly bags, and folding cartons used in cosmetics, pharmaceutical food & beverage, chemical, and healthcare industries. The Everett, MA, company offers services such as blow molding, injection molding, multimedia production, contract manufacturing, and assembly & kitting. The company has JIT warehouse programs and offers complete turnkey solutions.
-
-
-
-
-
Peerless Materials Company
Funnels
Company Overview
Peerless Materials Company, was established in 1967 and headquartered in Vernon, California, is a manufacturer and distributor of wiping materials, absorbents, and spill response products. Their diverse product line includes wiping rags, non-woven wipers, paper towels, absorbents, as well as spill kits, booms, and sorbents. Catering to industries like manufacturing, construction, transportation, and environmental, these products serve crucial roles in wiping, absorbing, containing, and cleaning up various fluids and materials.
-
-
-
-
-
-
-
Kinematics & Controls Corporation
Funnels
Company Overview
K Controls, a British company, specializes in developing, manufacturing, and distributing industrial valves, actuators, and control equipment to various sectors, including oil and gas, petrochemicals, and water treatment. For over four decades, the company has delivered inventive and dependable solutions to intricate engineering problems, earning it an excellent reputation. Among its achievements is the Queen's Award for Enterprise in International Trade, which it received in 2015 for contributing significantly to the UK economy through exports. K Controls is a provider of industrial control equipment both locally and globally, thanks to its strong devotion to originality and customer service.
-
-
-
-
-
The Cary Company
Funnels
Distributor Overview
The Cary Company, founded in 1895 and headquartered in Addison, Illinois, is a supplier of container, packaging, and spill control products and solutions. It stocks products like pails, plastic jars, and caps used in several industries, including construction, industrial chemicals, and personal care. The company provides several services, including label application, bottle design and manufacturing, and product sourcing. In 2018, it acquired Gurman Container & Supply Corporation, which helped it expand in the rigid packaging industry. Later, in 2019, it acquired Three Rivers Packaging Inc. to grow its drum and tote offering.
-
-
-
-
-
Ryan Herco Flow Solutions (HQ)
Funnels
Distributor Overview
Ryan Herco Flow Solutions was founded in the 1950s in California. RHFS sells and provides value added support for a wide variety of fluid handling and filtration needs. Product categories include tubing, hoses, piping, drain waste vent & containment, valves, measurement & control devices, fluid pumps, filters & housings, storage & containment tanks, heaters, mixers, and grating in addition to customized systems and material fabrication. Value added services include industrial service and repair of components, custom fabrication, and pump repair services.
-
-
-
-
-
Interstate Products, Inc.
Funnels
Distributor Overview
Interstate Products, Inc. was founded in 1996 and is headquartered in Sarasota, Florida. Interstate Products is a distributor of environmental, storage, and safety product solutions to help customers comply with stringent EPA, OSHA, DOT, and military regulations as well as improve on environmental storage solutions. The company’s products are also often used in disaster cleanup and relief efforts around the globe. The company has many product categories ranging from aqua bags to material handling to welding equipment but specializes in safety cabinets, spill containment, and storage tanks.
-
-
-
-
-
Hassel Material Handling Co.
Funnels
Distributor Overview
Hassel Materials Handling Co. was established in 1968 and is a distributer for material handling solutions. Hassel Materials Handling product lines include “carts & trucks” such as picking carts and shelf trucks, “cranes, hoists & crane accessories” such as jib cranes and chain hoists, “ergonomic products” such as industrial seating and antifatigue matting, “gravity & power conveyors” such as gravity conveyors and plastic belt conveyors, “loading dock equipment” such as dock lights and hoppers, “security & wall systems” including guard rails and post protectors, “shop equipment” such as workstations and welding reels, and “storage products” such as workbenches.
-
-
-
-
-
Fillmore Container, Inc.
Funnels
Distributor Overview
Fillmore Container, Inc., establised in 1995, and headquartered in Lancaster, Pennsylvania, is a distributor of packaging solutions. Its range of product includes glass jars and bottles, lids & caps, canning suplies, and accessories, catering to industries such as food & beverage, and crafting industries. The company offers sustainable and eco-friendly options in which its packaging solutions represent the company's adherence to quality by ensuring product freshness, enhancing visual appeal, and supporting numerous industries.
-
-
-
-
-
Source Equipment Company, Inc.
Funnels
Company Overview
Source Equipment Company, Inc. was established in 1989 and headquartered in Leominster, Massachusetts. Source Equipment Company is a solution provider in warehousing, distribution management, and equipment sourcing. Source Equipment Company’s extensive catalog includes bins, boxes, cabinets carts, casters, chairs, containers, conveyors, cranes, barriers, dollies, doors, dumpers, hoppers, lifting equipment, office furniture, pallets, partitions, platforms, racks, safety equipment, scales, security equipment, trucks, wires, work benches, and other warehouse equipment including access equipment such as stairlifts, wheelchair lifts, ramps and residential elevators.
-
-
-
-
-
SCAT Europe GmbH
Funnel with lid MARCO
Manufacturer Overview
SCAT Europe GmbH is based in Mörfelden-Walldorf, Germany, and is a manufacturer of safety products for chemical plants and laboratory facilities established in 1998 before becoming a subsidiary of Element Materials Technology in 2019. The company’s product lineup includes high-performance liquid chromatography (HPLC) products for safely disposing of solvent waste, HPLC handling equipment such as filters and pumps, and safety funnels for filling solvents into containers. It also offers various containers such as drums, bottles, and cans. The company’s products are mainly used in the pharmaceutical and chemical industries.
-
-
-
-
-
PRADEEP PLAST
Plastic Funnel
Manufacturer Overview
PRADEEP PLAST, founded in 1994 and headquartered in Gujarat, India, is a manufacturer and supplier of plastic household products. The company's main products include plastic pan trays, transparent containers, partition square containers, porous fridge mats and visit card boxes. Some of its other products are trolleys, food keeper sets, plastic funnels, garment hangers and multipurpose racks. These products are made from food grade to light and medium density plastic according to its usability. The company provides tailored solutions in varied specifications and dimensions.
-
-
-
-
-
Superfit Continental Private Limited.
Laboratory Funnels
Manufacturer Overview
Superfit Continental Private Limited., founded in 1986 and headquartered in Mumbai, India, is a manufacturer and supplier of scientific instruments. The company's main products include a range of labomed microscopes, medical and stereo microscopes and digital cameras. Besides that, it offers a range of lab instruments like freezers and chambers, plasticware, glassware, silicaware and teflon ware products, lab funnels, shakers and connectors. The company has a team of engineers, researchers and quality controllers to develop the products with desired specifications and adhere to quality standards.
-
-
-
-
-
Narang Medical Limited
Buchner Funnel
Manufacturer Overview
Narang Medical Limited, established in Delhi, in 1989 is a manufacturer of medical Equipment, Hospital Furniture, Orthopedic Implants, and Instruments. Their product portfolio includes infusion pumps, anesthesia machines, defibrillators, and diagnostic devices used in various medical settings. The company products find application in Hospitals and Medical Centers, Clinics and Healthcare Facilities, Orthopedic Centers and Hospitals, and Ambulatory Surgical Centers. The company exports its products to over 80 countries including the USA and the Middle East.
-
-
-
-
-
Asynt Ltd
Vacuum filtration funnels
Manufacturer Overview
Asynt Ltd., founded in 2003 and headquartered in Isleham, Cambridgeshire, United Kingdom, is a laboratory equipment and scientific tool developer and manufacturer. The company's products are benchtop synthesis tools, jacketed lab reactors, and pressure reactors. It also offers a range of flow chemistry modular platforms, electrochemistry tools, and photochemistry equipment. Its services include bespoke design, engineering, and production of custom instruments and equipment, including chemistry solutions, bespoke scientific glassware, and engineered alloys.
-
-
-
-
-
ESAW India
FUNNELS
Manufacturer Overview
ESAW India, founded in 1962 and headquartered in Haryana, India, is a manufacturer of physics, laboratory, electronics and other scientific instruments. Starting as a manufacturer of microscopes, the company now offers over 6500 products including laboratory equipments like ovens, incubators and freezers, lab glassware & plasticware products and physics, biology and chemistry instruments for science education and scientific research markets. Its range of microscopes include medical, biological and stereo microscopes, microscope cameras and student microscopes. The company exports to about 65 countries including USA, UK, UAE Finland, Croatia and Porugal.
-
-
-
-
-
PMF Industries, Inc.
Funnels
Manufacturer Overview
PMF Industries, formerly known as Precision Metal Forming, is a manufacturer offering concept-to-completion custom manufacturing solutions since 1961, based in PA, USA. The company provides flow formed parts, including hollow, symmetrical shapes using processes like hot spinning, deep drawing, welding, laser cutting, and more. They are ITAR registered, and ISO 9001:2015, EN/JISQ 9100:2016, and AS9100D certified. They offer customized solutions to a diverse range of industrial vital needs, including sectors of aerospace, energy, environmental, filtration, medical, and more. They have a Nadcap Accreditation and are an approved supplier for GE Aviation and Rolls-Royce, among others.
-
-
-
-
-
Cincinnati Valve Company
Funnels
Manufacturer Overview
Cincinnati Valve Co., founded in 1994 and headquartered in Cincinnati, Ohio, is a manufacturer and supplier of industrial valves. They cater to diverse industries such as oil and gas, energy, water, and mining, offering a product line that encompasses an extensive range of valves, including ball valves, butterfly valves, gate valves, and globe valves, as well as check valves and plug valves in bronze, iron, and cast steel. These components are used to control the flow of fluids in various industrial processes, enabling precise regulation of flow rate, pressure, and direction for control and safety.
-
-
-
-
-
Important Papers
Funnels
Manufacturer Overview
FLSmidth is based in Copenhagen, Denmark. FLSmidth is a full flowsheet technology and service supplier to the global mining and cement industries. FLSmidth’s services reduce customer costs and environmental impact while improving performance. FLSmidth’s mining solutions include maximizing lithium production, reduce water usage, enhance wear resistance, improve flotation efficiency, and reducing downtime. FLSmidth’s services include online condition monitoring services, feeding and dosing equipment services, electrical and automation audits, gas analysis and emissions monitoring services, service aggrements for MAAG Gear Units, and gravity concentrator services, audits, and training.
-
-
-
-
-
Sun Platec
High Speed Funnel
Company Overview
Sun Platec is an ISO 9001-certified manufacturer and distributor of laboratory equipment and supplies that was established in Osaka, Japan, in 1960. The company offers laboratory equipment such as tubes and pipettes, and laboratory supplies such as wipes and tips. It also offers various containers including flasks and bottles, and polytetrafluoroethylene (PTFE) beakers and crucibles. The company’s products are commonly used in Asia’s educational and research institutions. Its clients include companies in the biotech, pharmaceutical, and food processing industries.
-
-
-
-
-
Reagents
Funnels
Company Overview
Reagents, established in 1997 and headquartered in New York, USA, is a manufacturer and distributor of laboratory chemicals and reagents. Serving academic institutions, research laboratories, pharmaceutical companies, and other industries, the company offers a diverse range of products that encompass organic and inorganic chemicals used in pharmaceuticals, plastics, water treatment, and more. They provide biological stains and indicators for laboratory applications like cell culture and DNA analysis, along with culture media ingredients for microbial growth. Their product portfolio also caters to applications in batteries, pigments, and catalysts. Reagents' comprehensive offerings support education, research, and manufacturing processes across various sectors.
-
-
-
-
-
Pegasus Glass
Funnels
Company Overview
Pegasus Glass established in Cambridge, Ontario in 1968 is a distributor and manufacturer of borosilicate glass products that are used in chemical, industrial, lighting, and optics. Their product range includes glass rods, glass tubing, sight glass, lampworking supplies, and processed glass. Their products are also used in industries such as Medical Devices Artistic Glass Chemical Pharmaceutical Biotech. The company has a warehouse with 375 standard sizes of glasses and also produces recycled or re-used galasses to have zero waste.
-
-
-
-
-
Metsch Refractories Inc.
Funnels
Company Overview
Metsch Refractories Inc., established in 1982 in the United States, is a manufacturer and supplier of good-performance refractory products for industrial applications. The company’s comprehensive product lineup includes refractory bricks, castables, mortars, and precast shapes designed to withstand extreme temperatures and corrosive environments. These solutions are crucial in industries such as steel, cement, petrochemical, and more. Metsch Refractories' passion for quality and creativity is evident in their advanced refractory materials that enhance the efficiency and longevity of industrial processes. The company also continues to play a significant role in supporting various industries' operational success.
-
-
-
-
-
Laboratory Supply Distributors, Corp.
Funnels
Company Overview
Laboratory Supply Distributors, Corp. was founded in the early 2000s and is headquartered in Vineland, New Jersey. The company is a manufacturer and supplier of unique products for the analytical, environmental, research, pharmaceuticals, and academic communities. The company’s product and service mix expedites and simplifies customers’ analysis process. Brands the company stocks include National Scientific, Wheaton Science Products, J.G. Finnegan, and Agilent Technologies. Products include vials with screw caps, test tubes, culture plates, and almost any component and tool used in laboratory operations.
-
-
-
-
-
Associated Bag
Funnels
Company Overview
Associated Bag is headquartered in Harrisburg, Pennsylvania. Associated Bag is a bag and shipping product distributor with 4 distribution centers across the United States. Associated Bag Products include anti-rust & anti corrosion bags, boxes, bubble & cushioning, business envelopes & mailers, dispensary products, document & media protectors, eco-friendly products, food service & packaging, gloves, industrial & shipping supplies, janitorial supplies, liners & covers, personal protection, retail packaging, sealed air, tapes & adhesives, ties & sealers, tools & equipment, tubing, VCI products, vinyl, zipper bags, and more.
-
-
-
-
-
Empteezy
SAFETY DRUM FUNNEL
-
-
-
-
-
R.P. Crawford Co., Inc.
Funnels
Distributor Overview
R. P. Crawfard Co., Inc. began in 1962 in Pittsburgh, PA. RPC primarily develops and sells industrial products but also sells and promotional and consumer products. Industrial product lines include pallet racks and other material handling equipment, warehouse equipment including platforms and production tables, and storage shelving. Promotional and consumer products include apparel with and without logos, technology-related products, backpacks, bags, and coolers, pens and markers, drinkware, flags, and umbrellas.
-
-
-
-
-
PEP, A Ryan Herco Flow Solutions Company
Funnels
Distributor Overview
Plastic Engineered Products, Co. is owned by the Ryan Herco Flow Solutions Company and is a a distributor of fluid handling, control and high value filtration systems for corrosive and ultrapure systems. PEP offers both sales as well as services. Sales offerings include tubing, hoses, measurement & control devices, housings, tanks, and pumps. Services include custom plastic & fiberglass fabrication while field servies include emergency repair as well as maintenance and testing as well as fabrication and welding.
-
-
-
-
-
Abatix Corp.
Funnels
Distributor Overview
Abatix was established in 1983 and has offices across the United States. Abatix is a distributor of products for the general construction, industrial safety, petrochemical, energy, environmental, hospital, fire and water restoration, and disaster response industries. Abatix product offerings include abrasives, adhesives, tapes, building material & hardware, chemicals, lubricants, electrical, fall protection, gloves, hand tools, janitorial & facilities maintenance, jobsite supplies, material handling, personal protective clothing, poly sheeting, bags, power tools, restoration & environmental equipment, safety equipment, signs, tags, labels, test equipment & instrumentation, and welding & soldering.
-
-
Funnel Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | UDY Corp. |
10.5%
|
| 2 | Superfit Continental Private Limited. |
4.2%
|
| 3 | T & T Manufacturing, LLC. |
4.2%
|
| 4 | Berlin Packaging |
3.2%
|
| 5 | MO Industries, Inc. |
3.2%
|
| 6 | NDS Technologies, Inc. |
3.2%
|
| 7 | Bermar Associates, Inc. |
3.2%
|
| 8 | ESAW India |
2.1%
|
| 9 | Ace Metal Spinning, Inc. |
2.1%
|
| 10 | Vollrath Manufacturing Services |
2.1%
|
Derivation Method
The ranking is calculated based on the click share within the funnel page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- T & T Manufacturing, LLC.: 85
- PRADEEP PLAST: 10
Newly Established Company
- Foxx Life Sciences: 2008 (16 years ago)
- Worldwide Bearings: 1994 (30 years ago)
- PRADEEP PLAST: 1994 (30 years ago)
Company with a History
- The Cary Company: 1895 (129 years ago)
- Ace Metal Spinning, Inc.: 1947 (77 years ago)
- Wesco Industrial Products, LLC.: 1948 (76 years ago)
Funnel Manufacturers in United States
*Including some distributors, etc.
- MicroStrain, a LORD Company
- Wesco Industrial Products, LLC.
- Vollrath Manufacturing Services
- UDY Corp.
- T & T Manufacturing, LLC.
- Stainless Solutions LLC
- R/J Florig Industrial Co., Inc.
- Quark Glass
- Petit CNC a Div. of Petit Tool
- NDS Technologies, Inc.
- Micromold Products, Inc.
- Magnation Water Technologies
- International Crystal Laboratories
- Helander
- Foxx Life Sciences
- Dynalab Corp.
- Bermar Associates, Inc.
- Becker Aviation
- Baker Sheet Metal Corp.
- Ace Metal Spinning, Inc.
- Thermo Fisher Scientific Inc.
- Worldwide Bearings
- SaniSure, Inc.
- MO Industries, Inc.
- Metro Hydraulic
- McManus Drum Co. Inc.
- Jensen Inert Products
- Elite Restaurant Equipment
- BrandTech Scientific, Inc.
- Berlin Packaging
- Andler Packaging Group
- Peerless Materials Company
- Toledo Metal Spinning
- Kinematics & Controls Corporation
- The Cary Company
- Ryan Herco Flow Solutions (HQ)
- Interstate Products, Inc.
- Hassel Material Handling Co.
- Fillmore Container, Inc.
- Source Equipment Company, Inc.
Global Distribution of Funnel Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
40 | 90.9% |
India
|
3 | 6.8% |
Germany
|
1 | 2.3% |
List of Funnel Products
11 products are listed.
Fujiri Corporation Co., Ltd.
Beautiful finished glass rotation
40+ people viewing
The material uses a hard first -class fabric equivalent to Pyrex. It has a very beautiful finish with almost uniform dimensions. In addition, we ha...
SANPO KASEI
Small bottle / measuring device polyilot
70+ people viewing
■ Characteristics Roth with excellent chemical resistance. You can choose from 11 sizes according to the application. ■ Specifications Material: B...
