All Categories
History
This section provides an overview for board to board connectors as well as their applications and principles. Also, please take a look at the list of 2 board to board connector manufacturers and their company rankings.
Table of Contents
A board-to-board connector is a component used to electrically couple circuits on two printed circuit boards.
They are mounted directly on both boards to be connected, and are bridged by a cable with connectors attached to both ends of the cable.
A male connector on the printed circuit board and a female connector on both ends of the cable are used to connect the two boards together, thereby directly connecting the boards electrically.
Furthermore, some board-to-board connectors do not use cables with connectors for bridging, but directly connect the board-to-board connectors on both printed circuit boards to directly connect the two boards electrically.
Board-to-board connectors are available in various sizes of signal cables and pins in the connectors, depending on the location of use and the required current capacity.
What is required of board-to-board connectors is how many signal cables can be accommodated in the connector and how well they can be maintained in a stable electrical and physical connection.
Board-to-board connectors are almost certainly used in all types of equipment that use printed circuit boards, including most consumer and commercial equipment.
Without exception, these devices are becoming increasingly sophisticated and high-performance, and with this trend comes the need to reduce board space, resulting in the need for all electrical components, including board-to-board connectors, to be smaller, thinner, and lighter.
As mentioned above, the purpose of a board-to-board connector is to electrically and directly connect two printed circuit boards.
Originally, if all functions could be realized on a single board, there would be no need for a board-to-board connector, and this method is considered to be the most cost-effective and inexpensive.
However, in order to implement all required functions within the limited physical space of a device, it is practical to divide the board into multiple boards of appropriate sizes and insert them into the device to secure space inside the device.
In addition, there are significant advantages to be gained by dividing PCBs by function, which ultimately leads to cost reductions in the equipment.
By dividing the printed circuit board into multiple boards for each functional unit and combining these multiple boards, it is possible to realize multiple products with various functions at the same time. In this case, board-to-board connectors that combine multiple boards are effective.
For example, suppose that there are three boards to realize the necessary functions in designing a certain product: board A for basic functions, board B for additional functions, and board C for additional functions.
By using only board A, a product with the most basic functions can be realized, and by using boards A+B, a product with added function B, A+C, and A+B+C, a product with added function B, and a product with added function B+C, respectively, can be realized.
In other words, four types of products can be realized by preparing boards with three functional units and combining them.
*Including some distributors, etc.
Sort by Features
Sort by Area
DDK Ltd., founded in 1963 and currently a subsidiary of Fujikura Ltd., is a Japanese manufacturer and supplier headquartered in Koto-ku, Tokyo, specializing in electronical connectors. The company’s product range includes automotive, board-to-board, circular and rectangular, coaxial, as well as flexible flat cable (FFC)/flexible printed circuit (FPC) connectors. These connectors are utilized across industries such as automotive, applied in automotive navigation systems, electronic toll collections, and vehicle audio devices; base stations of wireless computer networking; factory automation, applied in control equipment, industrial robots, servomotors, and welding machines; and information technology, applied in digital cameras and video cameras, mobile devices, and measuring instruments.
Samtec was established in 1976 and is headquartered in New Albany, Indiana, USA as a manufacturer of electronic interconnect solutions. They offer an extensive portfolio of products, including board-to-board connectors, IC sockets, cable assemblies, and optical systems. Alongside their product offerings, Samtec provides comprehensive design and engineering support, as well as custom solutions tailored to specific customer needs. Their products find applications in high-speed data transmission, embedded computing,, and advanced electronic systems across various sectors.
Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
Japan
|
1 | 100.0% |
137 products found - Page 1
137 products - Page 1
PHOENIX CONTACT
160+ people viewing
Last viewed: 13 hours ago
Standard Response
■0.635mm pitch connector with maximum tolerance correction of ±0.7mm The FS 0,635 series space-saving board-to-board connectors enable mezzanine-or...
4 models listed
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 11 hours ago
Standard Response
4.0 Company Review
■Features ・Space-saving FPC connector with a pitch of 0.5mm, total height of 0.9mm, and depth of 3.2mm. ・Applicable FPC thickness 0.2mm+/-0.03mm,...
PHOENIX CONTACT
560+ people viewing
Last viewed: 8 hours ago
Standard Response
■Shielded and unshielded, 0.8 mm pitch The board-to-board connector FP 0,8 series features innovative ScaleX technology. Unique double contacts ens...
10 models listed
Kyocera Corporation
700+ people viewing
Last viewed: 1 day ago
A board-to-board connector is a connector used to connect a printed circuit board to a printed circuit board or a printed circuit board to an FPC, ...
9 models listed
Hoshiden Co., Ltd.
440+ people viewing
Last viewed: 2 hours ago
Standard Response
A composite connector that integrates a high -speed signal transmission (coaxial) and a power line (2pin) to achieve miniaturization. ■ Use In -ve...
3 models listed
Japan Aviation Electronics Industry, Limited
30+ people viewing
Last viewed: 7 hours ago
Standard Response
4.0 Company Review
■Bottom contact for 0.5mm pitch FPC connection This is an SMT type connector for 0.5mm pitch FPC connection that supports multi-pole connections su...
PHOENIX CONTACT
360+ people viewing
Last viewed: 14 hours ago
Standard Response
■Shielded and unshielded, 0.8 mm pitch The board-to-board connector FP 0,8 series features innovative ScaleX technology. Unique double contacts ens...
10 models listed
Kyocera Corporation
480+ people viewing
Last viewed: 13 hours ago
FPC/FFC connectors are either FPC (Flexible Printed Circuit), which has a circuit printed with electrical conductors on a thin insulating sheet, or...
10 models listed
Iriso Electronics
630+ people viewing
Last viewed: 1 hour ago
■ What is Z-Move? ･ Internal contact board two boards (Btobⓡ) Z movable floating type connector assuming use in a strict vibration environment ･ Ad...
4 models listed
Greenconn TECHNOLOGY (Ganzhou) LTD.
260+ people viewing
Last viewed: 23 hours ago
*Other product numbers are available.
10 models listed
Japan Aviation Electronics Industry, Limited
30+ people viewing
Standard Response
4.0 Company Review
■0.2mm pitch total height 1mm or less FPC connector This is a 0.2mm pitch narrow pitch bottom contact FPC connector that is compatible with space s...
Nippon Tanshi Co., Ltd.
80+ people viewing
Last viewed: 2 hours ago
■Features ・Compliant with RoHS and ELV directives ・Embossed taping specifications ・Low profile and low mating force connector with outer lock st...
Japan Aviation Electronics Industry, Limited
30+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■High-speed transmission connector compatible with shielded FFC As the internal transmission capacity of LCD TVs, personal computers, etc. increase...
Castech Shoji Co., Ltd.
80+ people viewing
Last viewed: 6 hours ago
■Board-to-board (board-to-board) connector – B2B® The proven high reliability and design flexibility can be used even under harsh conditions betwee...
Iriso Electronics
400+ people viewing
Last viewed: 5 hours ago
0.4mm pitch that enables high -speed transmission of digital signals, floating type parallel connection (ST / ST) Btobⓡ connector. 0.4mm movable in...
3 models listed
Greenconn TECHNOLOGY (Ganzhou) LTD.
270+ people viewing
Last viewed: 12 hours ago
*Other product numbers are available.
10 models listed
Nippon Tanshi Co., Ltd.
50+ people viewing
Last viewed: 8 minutes ago
■Features ・Compliant with RoHS and ELV directives ・Embossed taping specifications ・Supports function to prevent incorrect mating due to differen...
PHOENIX CONTACT
310+ people viewing
Last viewed: 12 hours ago
Standard Response
■1.27mm pitch high-speed data transmission Are you looking for a compatible replacement for future industrial requirements with a built-in 1.27mm p...
10 models listed
Kyocera Corporation
110+ people viewing
Last viewed: 1 day ago
A group of high-density mounting connectors for standard bus systems, next-generation standard c-PCI (PICMG compliant) system connectors. The 8071 ...
10 models listed
Iriso Electronics
970+ people viewing
Last viewed: 7 hours ago
Compact large -current support for power connection in a limited space. It is a multi -contact structure that provides reliable low contact resista...
4 models listed
Takitech Co., Ltd.
280+ people viewing
Last viewed: 15 hours ago
Very Fast Response
■Summary This is a highly reliable, small, large-capacity connector for printed circuit boards that enables a wide range of connections from signal...
2 models listed
PHOENIX CONTACT
280+ people viewing
Last viewed: 6 hours ago
Standard Response
■High-speed data transmission with 0.635mm pitch The FS 0,635 series space-saving board-to-board connectors enable mezzanine-oriented printed circu...
10 models listed
Jepico Co., Ltd.
230+ people viewing
Last viewed: 6 hours ago
4.0 Company Review
■ Characteristics ・ It is a 2.54mm pitch connector by the Hypertac brand. Compatible with MIL-DTL-55302. You can select male/females on both the p...
Würth Elektronik
20+ people viewing
Last viewed: 4 hours ago
Standard Response
Castech Shoji Co., Ltd.
30+ people viewing
Last viewed: 9 hours ago
■Product features Operating temperature range -40℃ to +105℃
Nippon Tanshi Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
■Features ・Compliant with RoHS and ELV directives ・A right-angle type multi-pole board-in connector used to pull out lead wires laterally from th...
Nippon Tanshi Co., Ltd.
50+ people viewing
Last viewed: 9 hours ago
■Features ・Compliant with RoHS and ELV directives ・Uses a case lance method that is easy to insert into the housing ・The tip of the contact is d...
Nippon Tanshi Co., Ltd.
50+ people viewing
Last viewed: 27 seconds ago
■Features ・Compliant with RoHS and ELV directives ・A right-angle type multi-pole board-in connector used to pull out lead wires laterally from th...
Würth Elektronik
30+ people viewing
Last viewed: 12 hours ago
Standard Response
Japan Connect Industry Co., Ltd.
200+ people viewing
Last viewed: 4 hours ago
■Features - Suitable for connecting two boards (main board and sub board). - Can be attached to and detached from round pin sockets while maintaini...
10 models listed
