32 BNC Receptacle Manufacturers in 2024
This section provides an overview for bnc receptacles as well as their applications and principles. Also, please take a look at the list of 32 bnc receptacle manufacturers and their company rankings. Here are the top-ranked bnc receptacle companies as of April, 2024: 1.Bo-Jiang Technology, 2.Connekt Precision Electronics Co., Ltd., 3.Pi Manufacturing Corp.
Table of Contents
What Is a BNC Receptacle?
A BNC receptacle is used in connection with BNC plug connectors attached to both ends of a coaxial cable.
A coaxial cable is a signal transmission cable that carries signals in the megahertz band. The outside of the signal line at the center of the cable is doubly insulated, and the outside is further protected by a vinyl or other covering.
BNC receptacles are mounted on the panel surface (exposed side) of a device or on a circuit board inside the device.
BNC receptacles provide a direct connection between the internal circuits of the equipment and the signals of the coaxial cable.
Uses of BNC Receptacles
The connection using a combination of a BNC plug connector and a BNC receptacle is a commonly used connection method and is called the Bionet-Lock method. This allows for easy adjustment of coaxial cable routing, for example, even after connecting devices.
The BNC plug connector and receptacle can be connected relatively easily without using screws, simply by pressing and turning the internal spring to engage the BNC plug connector and receptacle, yet the connection is strong and can be easily removed.
Principle of BNC Receptacles
BNC receptacles are often used in combination with BNC plug connectors in various measuring, communication, and video equipment.
Due to the characteristics of the connector, it is considered that the frequency of the signal used should be up to about 300 MHz, and is not suitable for the transmission of signals above this frequency.
The electrical characteristics and shape of BNC plug connectors, including BNC Receptacles, are specified by MIL (military standard: a technical standard issued by the US Department of Defense).
BNC plug connectors are often used to transmit signals over coaxial cables, but there are other connectors for similar purposes.
DIN connectors are used for broadcasting equipment, for example, because they can maintain transmission quality even in humid environments. F-type connectors are also used for coaxial cables for TV antenna cables, and N-type connectors are used for radio oscillators and other equipment because of their waterproof function.
List of 32 BNC Receptacle Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- France
- India
- Japan
- Taiwan
- United Kingdom
-
-
-
PCB Piezotronics
BNC Connectors
Manufacturer Overview
PCB Piezotronics, founded in 1967 and headquartered in North Carolina, is a manufacturer of sensors for design engineers and predictive maintenance. They design and manufacture various sensors such as microphones, vibration, pressure, force, and torque sensors. Their products are used for testing, measurement, monitoring, and control requirements in automotive, aerospace, military, and other industries in order to gather accurate data, ensure safety, enable predictive maintenance, and facilitate advancements across multiple industries. PCB Piezotronics is a subsidiary of Amphenol Corporation.
-
-
-
-
-
Molex, LLC
Connector
Manufacturer Overview
Molex was founded in 1938 with the invention of Molex in 1938 and today is headquartered in Lisle, Illinois, and a subsidiary of Koch Industries. In the 1950s, the company invented the Molex connector which became the standard for power connections in personal computers for decades. Today the company is a manufacturer of electronic and fiber optic connectivity systems for customers in industries such as automotive, consumer electronics, healthcare, manufacturing, and telecom infrastructure. The company has several product categories including Connectors, Optical Solutions, Capillary Tubing & Micro Components, and Automation.
-
-
-
-
-
L-com
BNC Connectors
Manufacturer Overview
L-com was founded in 1982 and is headquartered in North Andover, Massachusetts. The company serves many industries including electronics, medical, industrial automation, military, and telecommunications a manufacturer and servicer of wired and wireless communications products. The company’s custom product capabilities include customized cable assemblies, WiFi antennas, adapters, and surge protectors. Through its parent company, Infinite Electronics, the company offers a broad range of RF components and assemblies to over 100,000 global customers.
-
-
-
-
-
Fairview Microwave, Inc.
Connectors
Manufacturer Overview
Fairview Microwave was established in 1992 in Lewisville, TX, and is a manufacturer of RF and microwave components for industrial automation, military defense, telecom-broadband, commercial electronics, and building automation industries. Its RF product catalog includes RF noise source generators, RF power dividers and tappers, RF coaxial surge protector lightning, RF connector dust caps, and RF power combiners. The company also designs bias tees, calibration kits, frequency synthesizers, impedance matching pads, and hybrid couplers. It provides cable phase matching, 3D CAD drawings, and RF cable design services.
-
-
-
-
-
E-Z Hook, A Div. of Tektest, Inc.
BNC MALE
Manufacturer Overview
E-Z Hook, A Div. of Tektest, Inc., is a manufacturer established in 1956 and headquartered in Irwindale, specializing in the production of electronic test accessories. Some of the products offered by the company includes video cables, automotive electrical connectors, phone jacks and plugs, coiled cords and cables, and electrical test probes. These products are used in a diverse industries for test and measurement purposes. The company holds an ISO 9001 for its quality management system.
-
-
-
-
-
Amphenol RF
BNC Connectors
Manufacturer Overview
Amphenol RF, established in 1925 with headquarters in the USA, is a global manufacturer of coaxial connectors for use in radio frequency, microwave, and data transmission system applications. The company's product portfolio covers a wide range of RF connectors, coaxial adapters, and RF cable assemblies that provide reliability in a range of harsh environments and rough-use situations. It serves the broadband, IoT, instrumentation, medical, military, and wireless markets. Examples include mission-critical military electronic systems, ruggedized communications, and RF signal connections to enable automation in warehousing and logistics.
-
-
-
-
-
MilesTek
BNC Connectors
Company Overview
MilesTek, established in 1981 and headquartered in Irvine, California, is a manufacturer and supplier of specialized connectivity solutions. The company provides a broad range of MIL-STD-1553 and Ethernet connectivity products to address military avionics, aerospace, and industrial agencies. The company’s offerings encompass bulk cables, cable assemblies, fiber optics, patch panels, and networking accessories. Its products facilitate data transmission and connectivity in various industries, including aerospace, industrial, government, consumer electronics, and telecommunications.
-
-
-
-
Company Overview
AIR802 was founded in 1998 and is headquartered in Oswego. The company is a manufacturer of professional, high-end wireless and cable products sold directly or through distributors and resellers to customers across North and South America, the UK, and Australia, primarily to computer networking and reseller organizations, telephone companies, cable TV, and military customers. The company's primary products are antennas, cables, coaxial, and modular RJ45 connectors. The company also sells tools for hardware management including stripping, crimping, and cutting tools.
-
-
-
-
-
-
-
-
-
-
-
-
-
DDK Ltd.
31 Series
Manufacturer Overview
DDK Ltd., founded in 1963 and currently a subsidiary of Fujikura Ltd., is a Japanese manufacturer and supplier headquartered in Koto-ku, Tokyo, specializing in electronical connectors. The company’s product range includes automotive, board-to-board, circular and rectangular, coaxial, as well as flexible flat cable (FFC)/flexible printed circuit (FPC) connectors. These connectors are utilized across industries such as automotive, applied in automotive navigation systems, electronic toll collections, and vehicle audio devices; base stations of wireless computer networking; factory automation, applied in control equipment, industrial robots, servomotors, and welding machines; and information technology, applied in digital cameras and video cameras, mobile devices, and measuring instruments.
-
-
-
-
-
Wellshow
BNC connector
Manufacturer Overview
Wellshow, established in 2003 and located in Taoyuan City, Taiwan, is a manufacturer of radio frequency products. The company's broad range of products includes connectors, cables, cable assemblies, WLAN antennas, and GPS antennas. These products are used across industries and applications, such as telecommunications, consumer electronics, automotive, industrial automation, and public safety. Wellshow's offerings are used in wireless communication and connectivity, supporting efficient data transfer and wireless communication solutions in diverse settings. The company is also ISO 9001:2008 certified.
-
-
-
-
-
Renhotec Group Ltd
BNC CONNECTOR
Manufacturer Overview
Renhotec Group Ltd was founded in 2008 in China as a manufacturer of electrical connectors. Its product portfolio includes connectors, adapters, cable assemblies, main connectors, and couplings. Power connectors and additional equipment are components in electrical systems, enabling the safe and efficient transmission of energy. The 120-pole air connector, a bayonet coupling with a voltage rating of 250V and an operating temperature range of -40°C to +85°C, is just one example of its product range that are used in various industries, including aviation, military, automotive, telecommunications, and new energy.
-
-
-
-
-
YIN SHENG TECHNOLOGY. CO., LTD.
BNC CONNECTOR
Manufacturer Overview
YIN SHENG TECHNOLOGY CO., LTD., a company established in 1990 and headquartered in Taipei, Taiwan, is a manufacturer and supplier specializing in microwave coaxial connectors, RF antennas, and cable hand tools. The company offers a wide range of products, including metal connectors, terminals, and various components used in electronic devices and automotive applications. The company also offers various services including technical support, customization options, timely delivery as well as stamping, die casting, turning, and plastic injection parts, to meet customers’ needs in a wide range of industries.
-
-
-
-
-
Radiall SA
BNC
Manufacturer Overview
Radiall, a global company founded in 1952, is a great manufacturer and supplier of interconnect solutions for industrial markets, including energy, sensors, and private communication networks. The company provides RF and fiber optic solutions, which offer support for intricate applications in the transportation, automation, and renewable energy industries. These applications encompass power plants, wind farms, and oil rigs. The company also collaborates with customers worldwide, delivering award-winning products and services. Leveraging its technical expertise and global existence, the company empowers people and drives the success of diverse industries.
-
-
-
-
-
Jiangsu Elesun Cable Co., Ltd
BNC Connector
Manufacturer Overview
Jiangsu Elesun Cable Co., Ltd., established in 2000 and located in Zhenjiang City, Jiangsu, is a manufacturer that specializes in research and production of different types of cables. The company offers RF coaxial cable, control cable, hook-up wire, XLPE cable, and elevator cable. It also provides ELESUN factory coaxial cable LSR300 low loss for communication. It offers environmental high-temperature cables that are suitable for use in any applications that require high-temperature resistance. The company has passed ISO9001 quality system certification. It serves a wide range of industries with its products, including telecommunications, automotive electronics, power transmission, and more.
-
-
-
-
-
Japan Aviation Electronics Industry, Limited
BNC Series Coaxial Connector
Manufacturer Overview
Japan Aviation Electronics Industry, Ltd, commonly known as JAE, was established in 1953 and headquartered in Tokyo, Japan. The company is a designer and manufacturer of connectors, user interface solutions, and electronics for the aerospace, agriculture, semiconductor, and camera stabilization sectors. THe company’s product segments include IO connectors, board to board connects, cable to cable connectors, and more. The company’s motion sensing and control segment includes accelerometers, inertial measurement units, and directional modules.
-
-
-
-
-
Connekt Precision Electronics Co., Ltd.
BNC Plug Bulkhead Receptacle
Manufacturer Overview
Connekt, a company founded in 1970 in Guerin District, Taiwan, is a manufacturer of RF connectors and electrical components. The company offers a wide range of products that include connectors, terminals, and cable assemblies for various industries including information processing, telecommunications, and products such as antennae, mobile phones, and data communication devices. Additionally, the company also offers customer services such as technical support, customization options, and order processing to meet customers’ requirements.
-
-
-
-
-
Bo-Jiang Technology
BNC RF Connector Series
Manufacturer Overview
Bo-Jiang Technology was founded in 1993, and is known as a manufacturer of microwave coaxial and 5G-related connector products. The company is in Tainan City, Taiwan, and serves the product design, production measurements, optical communication, and laboratory verification industries. Additionally, it has ISO 9001, IECQ QC 080000, and ISO 14001 certified with ISO/IATF16949 systems. Their products include test & measurement cables, SMB connectors, cable assemblies, coaxial probes, and high-frequency connectors from 1.0mm to 3.5mm for audio and video systems.
-
-
-
-
-
Pi Manufacturing Corp
BNC Male Connector
Manufacturer Overview
PI Manufacturing Corp. is a manufacturer and supplier of connectivity solutions and electronic components that is headquartered in Santa Ana, California, USA and founded in 1986. The company designs, manufactures, and distributes product categories such as cable assemblies, low-voltage products, security surveillance solutions, electronic components, and pro audio/video. The company provides solutions to multiple industries, including aerospace, defense, medical, and industrial. Its product range includes fiber optic cables, network cables, coaxial cables, and audio cables. Its main services include custom design, manufacturing, and testing as well as offering training and technical support to help its customers.
-
-
-
-
-
Etelux
KF40-BNC connector
Company Overview
Etelux, founded in 2004, is an ISO 9001: 2000 certified designer, manufacturer, and supplier of glove box technology products, vacuum coating equipment, solvent purifiers, isolators, and gas purifiers based in Beijing, China. The company produces various glove boxes, including standard, cleanroom, acrylic, and vacuum glove boxes. It also supplies glove box accessories such as glove ports, analyzers, ionizers, feed-throughs, and valves for personal protection. It offers vacuum coating equipment, including coin cell preparation, cylindrical cell preparation, pouch cell preparation, consumables for battery R&D, and solar & fuel cells R&D equipment.
-
-
-
-
-
Tocone
BNC Connectors
Company Overview
Tocone Co. Ltd. is an ISO 14001:2015-certified manufacturer and distributor of radio frequency (RF) products that was established in 1947 in Tokyo, Japan. The company offers coaxial RF connectors in a range of connector types and sizes, quick adapters for on-the-go measurement operations, and dummy load devices for terminating the end of a transmission line under test. The company’s products are used mainly by its clients in architectural engineering, telecommunication, and audio editing.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Times Microwave Systems
BNC
-
-
-
-
-
Bocoran RTP Live Slot Gacor Hari Ini
BNC connector
-
-
BNC Receptacle Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Bo-Jiang Technology |
21.4%
|
| 2 | Connekt Precision Electronics Co., Ltd. |
21.4%
|
| 3 | Pi Manufacturing Corp |
14.3%
|
| 4 | JAW-DROPPER INNOVATIVE CHANNEL CO., LTD. |
7.1%
|
| 5 | Shallin Electronics Co., Ltd. |
7.1%
|
| 6 | Lighthorse Technologies, Inc. |
7.1%
|
| 7 | COAX Connectors Limited |
7.1%
|
| 8 | Etelux |
7.1%
|
| 9 | AIR802 |
7.1%
|
Derivation Method
The ranking is calculated based on the click share within the bnc receptacle page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Japan Aviation Electronics Industry, Limited: 9,427
- DDK Ltd.: 100
- Rathod Enterprise: 20
Newly Established Company
- JAW-DROPPER INNOVATIVE CHANNEL CO., LTD.: 2004 (20 years ago)
- Jiangsu Elesun Cable Co., Ltd: 2000 (24 years ago)
- Connekt Precision Electronics Co., Ltd.: 1997 (27 years ago)
Company with a History
- Radiall SA: 1952 (72 years ago)
- Japan Aviation Electronics Industry, Limited: 1953 (71 years ago)
- Steren Solutions: 1956 (68 years ago)
BNC Receptacle Manufacturers in United States
*Including some distributors, etc.
- PCB Piezotronics
- Molex, LLC
- L-com
- Fairview Microwave, Inc.
- E-Z Hook, A Div. of Tektest, Inc.
- Amphenol RF
- MilesTek
- AIR802
- Steren Solutions
- Coaxicom Components Corp.
- EZ FORM CABLE TECHNOLOGIES LLC.
- Lighthorse Technologies, Inc.
Global Distribution of BNC Receptacle Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
12 | 42.9% |
Taiwan
|
6 | 21.4% |
China
|
4 | 14.3% |
Japan
|
2 | 7.1% |
India
|
2 | 7.1% |
France
|
1 | 3.6% |
United Kingdom
|
1 | 3.6% |
