All Categories
History
This section provides an overview for current sensors as well as their applications and principles. Also, please take a look at the list of 57 current sensor manufacturers and their company rankings. Here are the top-ranked current sensor companies as of December, 2024: 1.ACEINNA, Inc., 2.ELECTROHMS PRIVATE LIMITED, 3.Accuenergy Inc..
Table of Contents
Engaged in research on nitride semiconductor growth using the MBE method at Waseda University Graduate School. After graduating from graduate school in 2016, he joined a non-ferrous metal manufacturer.
Engaged in equipment maintenance and engineering work at metal smelting plants. Moved to a chemical manufacturer in 2022. Engaging in similar tasks.
A current sensor is a device that measures the current flowing in a circuit. It is sometimes also referred to as a current sensor.
A current sensors is attached to a circuit or conductor through which current flows and monitors the amount and characteristics of the current passing through it. They are generally rugged in design and can be used for long periods of time.
They can also measure with high reliability when properly installed. Some current sensors are capable of non-contact current measurement and are unique in that they can measure currents at high voltages and in hazardous environments.
However, the appropriate current capacity must be selected according to the current range you wish to measure. This is because there may be cases where the sensor may be damaged if an overload or overcurrent occurs. It is important to check the allowable current range and design appropriately.
Current sensors are mainly used in electrical circuits. The following are examples of applications of current sensors:
Current is monitored and controlled in power suppliers and power converters. In photovoltaic and wind power generation systems, current sensors monitor the amount and characteristics of the generated current to ensure a stable power supply.
They are also used to protect circuits and equipment from overcurrents. In power supply equipment and power circuits, currents exceeding the rated current can be detected by current sensors to activate protective circuits. Overcurrent protection is important to ensure safety from equipment failure due to short circuits, etc.
Used in battery management systems to monitor the charging and discharging current of batteries. By measuring the current, it is possible to evaluate the condition of the battery and estimate the remaining capacity. Battery monitoring with current sensors is important in various applications such as electric vehicles and mobile devices.
Current sensors are important devices in motor drive control. It measures the motor current and feeds it back to the control algorithm to control the torque and speed of the motor. It is widely used in drives, mainly inverters.
The principle of current sensors is to measure current based on Ampere's law. Ampere's law describes the relationship between the current passing through a conductor and the magnetic field around the conductor.
According to Ampere's law, the current passing through a conductor is proportional to the strength of the magnetic field formed around it. Current sensors are capable of detecting the effect of this magnetic field or current and sensing it as a voltage or other signal. Depending on the specific current sensor principle, different methods are used.
Different types of current sensors exist, depending on the measurement principle. The following are examples of current sensor types.
This type of current sensor measures the current value by connecting a shunt resistor in series with the circuit in which the current flows. The current flowing through the shunt resistor is calculated by the resistance value and the measured voltage drop according to Ohm's law. The current can be measured by measuring the voltage at both ends of the shunt resistor whose resistance is known.
The shunt resistor type can measure current with high accuracy. In addition, its simple structure allows it to be manufactured at low cost. They are used on boards and in rectifier circuits for large currents.
A Hall effect current sensor uses a Hall element to detect current. The Hall element is placed near a conductor through which a current flows, and a Hall voltage is generated by the magnetic field. By measuring this Hall voltage, the current is detected.
DC currents can be measured without contact. This type of sensor is used in portable clamp ammeters for DC.
This is a current sensor that transforms and measures alternating current. It consists of a conductor that serves as the secondary winding and measures the secondary winding current, which varies according to the primary winding current. This allows the AC current to be calculated.
Because of its low cost and high measurement accuracy, it is widely used in industrial equipment. However, their heavy weight and large area for use are drawbacks.
*Including some distributors, etc.
Sort by Features
Sort by Area
Magnelab, established in 1968 and based in Longmont, USA, is a manufacturer of AC current sensors and current transformers. The company designs and manufactures custom magnetics such as AC and DC current sensors, current transducers, voltage transformer and Rogowski coils. It also offers to build customized products from print or by design. The company offers resources like white papers for understanding its products and a blog covering educational topics related to magnetics. It has acquired ISO 9001:2015 certification and has RoHS and REACH SVHC declarations.
Honeywell International Inc. was founded in 1885 and headquartered in Charlotte, North Carolina. Honeywell is a diversified technology and manufacturing company to global customers in many industries such as aerospace, building technologies, performance materials, manufacturing, and safety. Honeywell produces hardware and software solutions for each industry it serves. In building technologies, Honeywell designs access controls, electrical and wiring, fire life safety, and employee training services. In aerospace, Honeywell designs cockpit systems and displays, engines, cabin management and cleaning, and health and usage monitoring.
CUI Devices, established in 1989 and headquartered in Lake Oswego, Oregon, is an electronic components manufacturer that is ISO 9001 certified. It stocks motion, sensor, and relay solutions and works with several distribution partners, including Mouser Electronics, Digi-Key Electronics, and Electro Sonic. The company gives back to the community by supporting organizations like Tualatin School House Pantry, Girls Who Code, and Friends of Trees, which aim to uplift society by providing basic needs, STEM education, and environmental stewardship. It has contract manufacturing facilities in other countries, including China, Vietnam, and Japan.
Functional Devices, Inc., founded in 1969 and based in Indiana, United States, is a manufacturer of electronic devices. The company holds ISO 9001:2005 certification for quality management. It produces building automation and lighting control devices that are used in different industries including electrical, fire & life safety, HVAC and building automation sectors. The building automation devices produced by the company are relays, current sensors, power monitoring, enclosures, and accessories. Besides this, it also manufactures lighting controls such as latching relays, lighting transformers, universal power packs, and emergency lighting.
Tokin America Inc., headquartered in San Jose, California, is a supplier of passive electronic components in North, South, and Central America and is a subsidiary of Tokin Corporation. Its diverse product range includes capacitors, noise countermeasure components, and sensors used in several industries, including telecommunication, automotive electronics, and digital home appliances. The company also provides specialized design support and works with several distributors within the United States, including Future Electronics, WPG Americas, and Bravo Electronics.
Incorporated in 1965, Analog Devices, Inc. designs, manufactures, tests, and markets integrated circuits (ICs), software, and subsystems that leverage analog, mixed-signal, and digital signal processing technologies. The company provides data converter products, power management and reference products for power conversion, driver monitoring, sequencing, and energy management applications in the automotive, communications, industrial, and high-end consumer markets. In addition, the company provides digital signal processing and system products for high-speed numeric calculations. It serves clients in the industrial, automotive, consumer, instrumentation, aerospace, and communications markets.
Aceinna Inc., established in 2017 as a spin-off from MEMSIC, Inc. (a pioneer in micro-electromechanical systems (MEMS) sensors), is an American manufacturer based in Andover, Massachusetts, developing sensing technology. The company offers inertial solutions, including inertial navigation systems (INSs), inertial measurement units (IMUs), and tilt sensors. It also produces current sensor integrated circuits (ICs) for motor controls, inverters, and uninterruptible power supplies. For flow and differential pressure measurement, the company provides configurable bi-directional flow modules and high-accuracy differential pressure sensors. These products cater to the heating, ventilation, and air conditioning (HVAC) sector, advanced driver assistance systems (ADASs), and autonomous vehicles.
Allegro MicroSystems, founded in 1990 and headquartered in Manchester, New Hampshire, is a fables manufacturer of sensor integrated circuits and application-specific analog power integrated circuits. Its diverse product portfolio includes sensors, regulators, and motor drivers used in several areas, including clean energy, automation, E-mobility, and computer markets. The company supports customers through its design and application centers located in South America, Asia, North America, and Europe. It went public in 2020, and its shares are traded on Nasdaq Global under ALGM. It ships over one billion units annually to support its more than 10,000 customers worldwide.
CTS Corporation was founded in 1896 and is headquartered in Lisle, Illinois. CTS is a manufacturer and distributor of sensors, actuators, and various connectivity components to telecommunications infrastructure, information technology, and other high-speed applications such as the aerospace and medical markets. CTS operates in 3 primary market segments: Sense, Connect, and Move. The Sense market segment includes controls such as potentiometers, pedals, sensors, and switches. The Connect segment includes various types of resistors, capacitors, and frequency control products. The move segment includes piezoelectric move products, rotary actuators, and thermal products including ZIF PC board retainers and heatsinks.
Hi-Watt Inc. is a supplier of industrial thermal & process components and heating & temperature control systems established in 1979 and headquartered in Clinton Township, Michigan. The company’s product portfolio includes industrial temperature sensors, temperature & process controls, and industrial electric heaters such as immersion, industrial infrared, cartridge, band, and strip heaters from brands such as Watlow, Eurotherm Distributor, Chromalox, Tempco, and Tutco. It supplies its process heating products, industrial electric heaters, and systems to many industries including injection mold tooling, plastic & chemical processing, defense & aerospace, OEM thermal processing, and research & development.
Automation Components Inc., founded in 2000 and located in Woodbridge, Connecticut, United States, is a distributor of binocular microscope systems, inspection systems, and trinocular systems. The company’s catalog contains products such as digital cameras, floor model comparators, flexible fiberoptic borescopes, pocket optical comparators, and video inspection systems. The products are used in mining, health, pharmaceutical, and chemical industries. It distributes products from brands such as Flexbar, Nikon, Acu-Gage, Kodak, and OGP.
Prodrive Technologies, established in 1993 and headquartered in Son, Netherlands, is a manufacturer that provides technology and manufacturing solutions. The company offers a wide range of products, including embedded computing systems, motion controllers, power conversion, and IoT products. It also offers a one-stop shop for all aspects of manufacturing, from NPI to life cycle management. Its products are designed to improve supply chain agility, which is essential in industries where time-to-market is critical. It serves various industries such as automotive, energy, industrial, and medical.
ELCO ELETTRONICA AUTOMATION SRL, headquartered in Conegliano, Treviso, Italy, and founded in 1976, is a manufacturer of controls and systems for industrial automation. The company offers a product catalog that includes stepper motors and devices, linear motors, and brushless motors and drives. These products have applications in various industrial processes, such as metal cutting using sawmill disc sawing machines, wood processing using edge banding machines, and marble processing using wired polisher machines.
TAMURA Corporation, founded in 1924 and headquartered in Tokyo, Japan, serves as a manufacturer and supplier of electronic and magnetic components. Its product lineup encompasses gate drivers for power switches, current sensors for measuring current flow, power modules for efficient power conversion, LED drivers for LED control, and transformers, reactors, and choke coils for energy transfer and regulation. These solutions provide dependable choices for system and machine design across industrial, automotive, communication, medical, and lighting sectors.
Shandong YUANXING Electronics Co., Ltd, founded in 1998, is an ISO 9001:2015 certified manufacturer of current transformers, voltage transformers, and insolation solutions for the energy, electric power, industrial control, and telecommunication industries based in Shandong, China. The company's range of products includes partial discharge current sensors and transducers, miniature voltage and current transformers, split core current transformers as well as instrument current transformers and inductors used for various applications such as mobile devices and remote keyless systems in automobiles.
Greystone Energy Systems Inc., established in 1983 and headquartered in Moncton, New Brunswick, Canada, is a manufacturer of HVAC sensors and transducers for building automation management systems. The company's core products include water detectors, humidification detectors, and passive water detectors. These products are used in commercial buildings to manage HVAC systems and provide power management as well as power conditioning. The company has expanded into nine locations globally, including regional sales offices in Dubai, India, and Malaysia.
Nanjing Chieful Science & Technology Co. Ltd., established in 2007 and headquartered in Jiangning, Nanjing, China, is a manufacturer of current and voltage transducers. The company's core products include Hall Effect current transducers, closed-loop current sensors, and AC and DC current transmitters. It provides a range of application-specific products, including for use with welding machines, automation equipment, and measuring devices. The company primarily serves bulk order clients, provides private label production, and also provides OEM and ODM services.
LEM, founded in 1972 at Meyrin, Switzerland is a manufacturer of transducers for measuring electrical parameters. The company’s core products include current and voltage transducers that are used in welding, UPS, renewable energies, high precision and the like. They also offer vast products used in the industrial sector such as power supplies for industrial applications, automotive applications and AC/DC converters among others. LEM has production plants in: Beijing, China; Geneva, Switzerland; Sofia, Bulgaria and Tokyo, Japan, and the company has been included in the SIX Swiss Exchange since 1986.
Mianyang Weibo Electronic Co. Ltd., established in 1989 and headquartered in Fresno, CA, United States, is a specialist manufacturer and developer of sensors and transducers. The company's core products include current sensors, frequency sensors, and intelligent voltage sensors. It also develops more sophisticated assemblies, such as new energy vehicle sensors for battery monitoring systems and intelligent sensors that control the electrical parameters of vehicle engines. The company has with ZTE and Huawei for mobile communication base station equipment supply and serves more than 7,000 consumers through its products.
Vacuumschmelze (VAC), founded in Germany, in 1913 is a manufacturer of magnetic alloys and their downstream solutions. The company's product portfolio includes Magnetic Alloys, Photovoltaic, Common Mode Chokes, Stamped Parts, Magnet Assemblies, and Inductive Components. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company also provides equipment repair, instrumentation system upgrades, and retrofits, preventive maintenance, and warranty services.
Piher Sensing Systems, founded in Spain in 1950, is a manufacturer of position, speed, and current sensors based on Hall-effect or inductive technology. It offers a range of products, including absolute rotary and linear position sensors based on Hall-effect or inductive technology, current sensors, contactless speed and direction sensors for transmission and gear systems, and trimmer and control potentiometers, but custom versions with different shafts and customer-specific output curves can be delivered on request. The company is also certified according to automotive standard IATF 16949 and has introduced a quality-management system in accordance with ISO 9001.
NiCera - Nippon Ceramic Co., Ltd. was established in 1975 in Japan as a manufacturer of ceramic sensors. The company designs infrared sensors that have applications in home electronics such as microwaves, air conditioners, heaters, etc. Ultrasonic sensors have been used in automobiles for back and corner sensing and for automatic parking systems. Current sensors are also used in automobiles as well as in industrial equipment along with gas sensors that have applications in the agricultural industry such as controlling CO2 concentration. The modules of human detection sensors and LED power supplies are also part of the production.
Asahi Kasei Microdevices Corporation, founded in 1980, is a Japanese manufacturer headquartered in Chiyoda City, Tokyo, specializing in sensing devices and integrated circuit (IC) products. The company’s product offerings include magnetic sensors, current and gas sensors, audio devices, and specialty devices. These products have diverse applications, such as in personal electronics, where AKM provides compact and low-consumption features for sound and magnetic sensing. They offer CO2 sensors and transceiver IC for millimeter-wave radar with high spatial recognition for smart homes. Additionally, AKM provides rotation angle sensors in industrial equipment like robots and motors to achieve accuracy and off-axis alignment simultaneously.
Melexis NV, founded in Brussels, in 1989 is a supplier of micro-electronic semiconductor solutions. The company's product portfolio includes Mixed Signal Integrated Circuits, Automotive Semiconductors, IC Sensors, Power ICs for Automotive Actuators, and Infrared Thermometers and sensors. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company has a global distribution channel, a technical and customer support center and 18 offices worldwide.
Electrohms Private Limited, established in 1973, is a designer and manufacturer of voltage and current transformer and sensor solutions with headquarters in Bangalore, India. The company offers various standard and custom-engineered solutions involving the design and production of custom products for the customer’s unique needs. The company adheres to ISO, CE, UL, and ANSI standards and offers solutions for various industries including railways, solar & wind, consumer, and EV chargers. It has also introduced customized smart-sensor solutions with communications for use in IoT and smart monitoring applications.
ETCR Electronic Technology Co., Ltd., established in 2006 and located in Guangzhou, China, is a manufacturer of non-contact and electronic measuring instruments. The company offers a range of products, including high-voltage detectors, earth resistance testers, insulation resistance testers, and high-voltage clamp current testers. It also provides a ground fault detector, wireless HV electroscope, and phase sequence detector. Its product can be used to search for hidden ground faults in overhead lines, such as single-phase metallic grounding. The company has received ISO 9001:2015 and CE certifications. It serves industries such as power systems, manufacturing, electrical engineering, maintenance, and troubleshooting.
CHEEMI TECHNOLOGY CO., LIMITED is a manufacturer based in China, specializing in cutting-edge technological solutions. The company's wide range of products includes sensors, transducers, switches, and transmitters. These products are used in various fields such as in vehicles, OEM device manufacturing, measuring apparatus, home appliances, and many more. The company also has a well-established partnership with renowned Universities like Tsinghua University, Nanjing University of Aeronautics and Astronautics, Nanjing Institute of Technology among other universities and research institutes.
Founded in 1885 at Cork, Ireland, Johnson Controls Inc is a manufacturer of smart building solutions and safety systems for commercial and domestic needs. The company with their OneBlue product focuses on producing blueprints for advanced and healthy technologies associated with schools, commercial buildings, hospitals and residences. The products comprise HVAC systems, building automation, security systems, energy storage, and automotive batteries. These products are used for their effectiveness in offering energy efficacy, safety, comfortability and sustainability for the dwellers. Their AI based intelligence functioning offers more productivity while being sustainable and environment friendly.
Texas Instruments Incorporated was founded in 1930 and is headquartered in Dallas, Texas. Texas Instruments is a producer of high tech equipment for industrial, automotive, personal electronics, communications equipment industries. Texas Instruments designs, manufactures, and sells semiconductors to electronics designers and manufacturers in the United States and internationally. Texas Instruments operates in two segments: analog and embedded processing. The Analog segment offers power products, including battery-management solutions, DC/DC switching regulators, power switches, linear regulators, voltage references, and lighting products. The Embedded Processing segment offers microcontrollers that are used in fields such as electronic equipment and digital signal processors for mathematical computations.
Monolithic Power Systems (MPS), founded in 1997 and headquartered in San Jose, California, is a manufacturer of integrated circuits (ICs). Their product range includes switch-mode power supplies (SMPS) for converting AC or DC power to lower voltage DC power, LED drivers for driving LED lights, battery management ICs to manage power in portable devices, power factor correction (PFC) ICs for improving power supply efficiency, and sensorless motor control ICs to control motors without position sensors. MPS's solutions find applications in consumer electronics, industrial, and automotive industries, offering efficient power management solutions to enhance various electronic devices.
ABB E-mobility provides electric vehicle charging solutions for customers around the globe. ABB E-mobility offers DC fast chargers as well as AC chargers with focus on reliability and uptime. Since 2010, ABB E-mobility has sold over 50,000 DC fast chargers and over 1 million total AC chargers. ABB E-mobility offers home single and multi-charge units, retail, workplace, and hospitality charge units, electric vehicle fleet sales, as well as public transportation. Additionally, numerous digital solutions and software services are available.
U.R.D., LTD., was founded in 1973 in Plaisians, Rhone-Alpes, and is a manufacturer and supplier of electronic parts and energy-efficient devices such as data conversion equipment, power measuring equipment, alarm equipment, and AC and DC sensors. The company makes alarm equipment like overcurrent and undercurrent alarms and flowing current detection modules. Its AC and DC sensor product catalog includes LED indicators, general-purpose CTL series, wire clamp split sensors, and high-frequency CT penetrated type. The company also offers accessories such as mounting brackets, assembly drawings, and receptacles.
ST Micro Electronics is a global semiconductor company serving customers with innovations to have a positive impact on people's lives. Their product line is micro electronic systems, such as switches, controllers, sensors and drivers. The main selling point of ST Micro Electronics is its provision of sustainable products, and introducing their electronics to create a more sustainable world. The company, as well as providing the electronic devices, also provides software and support, ensuring that all fields are covered to provide a fully provide a supported and strong relationship with their customer base. ST Micro Electronics believe that technology plays a key role in helping to solve environmental and social challenges, which is why their semiconductor technologies start with their employees, their customers and partners.
KOHSHIN ELECTRIC CORPORATION, founded on 1966, and headquartered in Okayama, Japan, is a manufacturer specializing in electrical and electronic components. Its product portfolio includes current sensors, electrical indicating meters, electronic parts, inverters for power plants, and power supplies. These products play a crucial role in measuring and controlling electrical currents across various applications such as power plants, power supplies, UPS systems, NC machine tools, welding equipment, in-vehicle technology, and lifts. The company maintains quality with its ISO 9001-certified Quality System.
Omron Corporation, started in 1933 and headquartered in Kyoto, Japan, is a manufacturer of automation components, equipment, and systems, and it developed the first contactless proximity switch in 1960. It has four domains, including industrial automation, electronic components, healthcare, and social systems, and it provides products and services in around 120 countries and regions. Some of its products include microsensing devices, access control systems, industrial robots, surveillance cameras, and blood pressure monitors. In 1971, it developed the first online cash machine, and in 1972, it established Japan’s first welfare factory.
Accuenergy Inc., started in 1998 and based in Toronto, Canada, is a manufacturer of industrial power and energy meter solutions. Its products include power meters, current transformers, and communication devices, and it also provides industrial control panel solutions. The company has a cloud energy management software called AcuCloud, which provides access to metered data and tools to analyze, import, and export data. It is ISO 9001, ISO 14001, and ISO 45001 certified and delivers solutions to over 170 countries worldwide. It has offices in Los Angeles, Beijing, and Pretoria and is a certified UL 508a shop that offers any customization.
Multi Measuring Instruments Co., Ltd. was founded in Chiba, Japan in 1986 and is headquartered in Tokyo. As per its namesake, Multi offers a vast array of measuring and testing equipment used across a number of industries. Some of their offerings include voltage meters, network testers, lux meters, cable locators, sound meters, various thermometers, gas analyzers, and water quality meters. Multi Measuring Instruments has a mission for its products to improve the global environment by detecting inefficiencies and leaks, developing products that will be useful for solar and wind power generation.
Antech Enterprise Limited, established in 2003 and based in Shenzhen, China, is a manufacturer and supplier of electrical components and solutions. Its product portfolio includes electrical components, integrated solutions, transistors, sensors, power electronic devices, and other accessories. The company’s products are used in multiple industries such as electrical equipments, home appliances, lighting, and electricity industries. They also offer one-stop electrical services for all needs, industrial computer solutions, and technical support.
Omicron, established in 1953 and headquartered in Mumbai, India, is a manufacturer and supplier of process control instrumentation such as flow switches and pressure gauges. The company's products include pressure and temperature instruments, level instruments, air quality and water quality sensors, psychrometric and portable instruments, and many more. These products find applications in diverse industries, including petrochemical, wastewater treatment, biotech and pharmaceutical, medical, semiconductor, and chemical manufacturing. It serves various clients, including EasyIO, Honeywell, ITC Limited, Sun Pharma, Hitachi, and others.
One-Core Technology Co. Ltd, based in Hong Kong, China, is a manufacturer and supplier of electronic components with a production workshop in Hong Kong and a sales branch in Shenzhen. The company's product catalog includes semiconductors, integrated circuits and electromagnetic components used in computers, mobile phones, automobiles and aerospace. The products undergo different tests like HD visual inspection, final function testing, open/short test and programming function testing to ensure meet the required standards. The company also has several distribution brands like Infineon, Analog Devices, Bisham, Microchip and Maxim Integrated.
Saket Electronics, established in 1992 and headquartered in Gujarat, India, is a manufacturer and supplier of electronic, mechanical, and hydraulic products. The company's products include solid-state relays, semiconductor assemblies, and specialized pneumatic and hydraulic logic systems components. It specializes in current transformers, power electronics, and process instrumentation. Its solid-state relays are used for switching in electrical circuits, and its thyristors provide control of power flow in machinery and equipment. Its pressure transmitters enable accurate measurement of fluid pressures in industrial processes. The company's products serve the textiles, solar, and aerospace industries, providing solutions from initial concept to volume production.
Hioki E.E. Corporation was founded in 1935 and headquartered in Ueda, Nagano. Hioki provides testing & analysis, manufacturing & inspection, and equipment maintenance to industries including mobility, battery, motor, energy, electronic components, and infrastructure. Hioki’s has 10 primary product categories which are: recorders and data loggers including oscilloscopes, LCR/Resistance Meters, safety testing including signal generators and calibrators, power meters including power quality analyzers, probes & sensors, optical & PV maintenance & telecommunication, environmental measuring, DMM & testers & field measuring, IoT & new solutions & meter relay, and bare board & package testing.
Campbell Scientific Inc., established in 1974 and headquartered in Logan, Utah, is a designer and manufacturer of measurement, data acquisition systems, and data loggers. The company sells sensors, measurement devices, and OEM products for water, weather, and soil applications. It also provides software for several purposes, including communication between data loggers and supporting data logger programming. It is ISO 14001, ISO 9001, and ISO 27001 certified, and it marketed its first product, named the CA-9 Path-Averaging Laser Anemometer, in 1974. It introduced its first data acquisition system, the CR5 Digital Recorder, in 1975.
PASCO Scientific, headquartered in the United States, is a supplier company of educational science solutions since 1964. The company's comprehensive product range includes science sensors, data loggers, and lab equipment, catering to different educational levels from K-12 to higher education. Hands-on science tools and datalogging solutions connect the students directly to science and STEM concepts with classroom technology such as sensors, interfaces, and data collection and analysis software. They also design and manufacture lab equipment for physics and engineering and offer curriculum solutions.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | ACEINNA, Inc. |
18.8%
|
| 2 | ELECTROHMS PRIVATE LIMITED |
12.5%
|
| 3 | Accuenergy Inc. |
12.5%
|
| 4 | Allegro MicroSystems, Inc. |
12.5%
|
| 5 | Elytone |
6.3%
|
| 6 | Jiangsu Acrel Electrical Manufacturing Co., LTD |
6.3%
|
| 7 | SAKET ELECTRONICS |
6.3%
|
| 8 | CHEEMI TECHNOLOGY CO., LIMITED |
6.3%
|
| 9 | Guangzhou ETCR Electronic Technology Co., Ltd. |
6.3%
|
| 10 | Melexis NV |
6.3%
|
Derivation Method
The ranking is calculated based on the click share within the current sensor page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
11 | 24.4% |
|
China
|
11 | 24.4% |
|
Japan
|
7 | 15.6% |
|
India
|
5 | 11.1% |
|
Germany
|
3 | 6.7% |
|
Canada
|
2 | 4.4% |
|
Netherlands
|
1 | 2.2% |
|
Italy
|
1 | 2.2% |
|
Switzerland
|
1 | 2.2% |
|
Spain
|
1 | 2.2% |
|
Belgium
|
1 | 2.2% |
Taiwan
|
1 | 2.2% |
9 products found
9 products
Tokin America, Inc
210+ people viewing
Last viewed: 16 hours ago
■Summary The lineup includes the new structure ZCT series with excellent temperature characteristics and the split type C/CT series of AC current s...
8 models listed
Acon Co., Ltd.
10+ people viewing
Last viewed: 1 day ago
The ATBC-P double closed Hall current sensor has reinforced insulation between the primary and secondary circuits and is based on the Hall effect m...
