50 Conductive Tape Manufacturers in 2024
This section provides an overview for conductive tapes as well as their applications and principles. Also, please take a look at the list of 50 conductive tape manufacturers and their company rankings. Here are the top-ranked conductive tape companies as of November, 2024: 1.Maxell, Ltd., 2.CS Hyde Company, 3.Shenzhen Linmao Electronic Material Co.,Ltd..
Table of Contents
Categories Related to Conductive Tapes
What Is a Conductive Tape?
A conductive tape is a type of tape that possesses conductive properties.
It is typically made from materials like aluminum or copper foil or contains conductive fillers, such as metal particles, within its adhesive layer. Conductive tape is known for its low electrical resistance. Given the variety available, choosing the right type of conductive tape for a specific application is crucial. Consider factors such as strength, flexibility, and whether a single-sided or double-sided adhesive is required.
This tape is often employed to shield equipment from external electromagnetic and electrostatic interference. It is applied near sources of noise or onto the surfaces of semiconductor devices.
By connecting one end of the conductive tape directly to the device's ground line, it serves to absorb and dissipate external noise through the ground line, effectively safeguarding the equipment.
Applications of Conductive Tapes
1. Static Electricity and Electromagnetic Shielding
Figure 1. Protection of components using conductive tape
In a factory environment, a worker touching a product charged with static electricity can potentially damage semiconductor components on the electronic board inside the product, or even lead to partial destruction in the worst-case scenario.
To prevent such situations, measures like laying down conductive mats within the factory are necessary. These mats allow static electricity to flow from the product enclosure's surface to the conductive mat on the worktable, grounding it in the process.
However, depending on the route static electricity takes into the equipment, it may reach the printed circuit board inside the product. In such cases, conductive mats alone may not suffice, and measures must be taken on the board level. Conductive tape is used to protect individual components by insulating them from static electricity and connecting them to the ground line.
2. Electrical Distribution Safety Measures
Conductive tape also serves as a safety measure in the distribution of electricity generated at power plants to offices and homes. While insulating tape is typically used to insulate cables from electricity, semi-conductive tape with slightly higher resistance is used in certain situations.
Cables containing a conductive layer can experience electric field concentration at specific points in the conductive layer if left unconnected when attached. Wrapping semi-conductive tape around the conductive layer helps alleviate this electric field stress.
3. Analytical Applications
Figure 2. Role of conductive tape in SEM
When observing samples with a scanning electron microscope (SEM) or transmission electron microscope (TEM), commonly used in R&D applications, it is necessary to ensure that the sample is conductive. Conductive tape is applied to both sides of the specimen when it is placed on the observation table to provide a discharge path for irradiated electrons and prevent specimen charging during observation.
Principles of Conductive Tapes
Figure 3. Structure principle of conductive tape
Conductive tape, like regular adhesive tape, consists of a base material and an adhesive. An adhesive is applied to embossed metal foil to impart conductivity, or metal particles are dispersed within the adhesive.
In addition to metallic foil, conductive tapes occasionally use conductive fibers with excellent flexibility as base materials. Conductive tapes with conductive fibers are often preferred for applications in moving or narrow equipment areas.
Types of Conductive Tapes
Among conductive tapes, there are specialized types like conductive carbon tape and transparent conductive tapes, designed for specific electronic equipment applications beyond just antistatic purposes.
1. Conductive Carbon Tape
Conductive carbon tape utilizes aluminum as the primary metal foil and incorporates a conductive filler of carbon powder within its adhesive layer. This results in the tape's characteristic black color.
Conductive carbon tape is often used as a double-sided tape with adhesive layers on both sides of the metal foil. It finds application in scanning electron microscopy (SEM) observation and is suitable for analytical applications due to its minimal or absence of gas emission.
2. Transparent Conductive Tape
Some transparent conductive tapes are used in cleanroom environments. Products lacking anti-static measures are unsuitable for cleanrooms as they attract dust and contaminants, posing a risk to the controlled environment.
One example consists of a polybutylene terephthalate resin (PET) base material with a poly-conductive layer and an acrylic adhesive on the external side of the layer. These transparent conductive tapes offer excellent conductivity and transparency, making them ideal for highly adhesive electronic tape applications used in packaging static-sensitive components. They also function as adhesive tapes with anti-static specifications to mitigate peel-off charging.
Furthermore, they are employed as electrostatic chucks for CMOS, MEMS, power devices, and glass wafers in plasma and CVD processes.
Additional Information on Conductive Tapes
1. Mitigating Static Noise
Conductive sheets and tapes are used to prevent equipment damage caused by static electricity. Static electricity poses a significant challenge in factories, as it can potentially lead to component damage on internal circuit boards, even if unnoticed until product shipment.
To address this, it is crucial to implement local countermeasures using conductive tape in conjunction with broader approaches, such as the following:
- Increase Humidity in the Factory: Maintaining a constant humidity level within the factory helps reduce electrical resistance on equipment surfaces.
- Provide Grounding Wires: Supply workers with grounding wires for their wrists and other body parts to prevent static electricity generation.
- Lay Conductive Sheets: Use conductive sheets to provide a discharge path for static electricity, even if a worker becomes charged.
- Apply Conductive Tape to Equipment: Protect equipment by affixing conductive tape near potential noise entry points and on semiconductor device surfaces.
2. Solderable Conductive Tape
Metal conductive tapes, such as copper foil tape and aluminum foil tape, are developed for soldering to metal foil surfaces to establish electrical connections with other components. Conductive tapes, featuring adhesive properties, are easily applied to objects and are suitable for wiring work involving soldering.
List of 50 Conductive Tape Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Germany
- Hong Kong
- India
- Japan
- Netherlands
- Republic of Korea
- United Kingdom
Adhesive backing for secure bonding to various surfaces.
Ideal for electrical connections, repairs, and antistatic applications.
Available in various widths and lengths for precise use.
Durable and reliable for long-term performance.
-
-
-
Shenzhen Yousan Technology Co., Ltd.
Electrically Conductive Tapes: Grounding, EMI Shielding, and Reliable Electrical Connections for Industrial and Electronics Applications
Company Overview
Shenzhen You-San Tech, founded in 1997, is a diversified group specializing in industrial tapes, films & die-cutting. With advanced R&D in adhesives, we provide tape solutions globally. Bases in Shenzhen, HK, Dongguan. ODM/OEM services available.
-
-
-
-
Manufacturer Overview
3M Company was founded in 1902 and is headquartered in St. Paul, Minnesota. 3M provides diversified technology services globally. 3M operates through four segments: Safety and Industrial, Transportation and Electronics, Health Care, and Consumer. The Safety and Industrial segment offerings include industrial abrasives, masking, and natural and color-coated mineral granules for shingles. The Transportation and Electronics segment offerings include ceramic solutions, light management films, and electronics assembly solutions. The Healthcare segment offerings include wound care, dentistry and orthodontia solutions, and filtration and purification systems. The Consumer segment offerings include consumer bandages, picture hanging, and stationery products.
-
-
-
-
-
CS Hyde Company
Conductive Tapes
Manufacturer Overview
CS Hyde, Company was founded in 1996 and is headquartered in Lake Villa, Illinois. The company is a manufacturer of high-end materials including adhesives, films, and rubber for customers from numerous industries including automotive, electronics, and large batteries. The company’s main products include pressure-sensitive tapes, silicone rubber sheets, threading, and 3D printing surface materials. The company also provides numerous services such as slitting, die and dieless cutting, sheeting, and belting. Other services include material conversion such as applying adhesives to films.
-
-
-
-
-
Can-Do National Tape, Inc.
Electrical & Thermal Conductive Tapes
Company Overview
Can-Do National Tape, Inc. was founded in 1972 and is headquartered in Nashville, Tennessee. The company is a manufacturer and distributor of adhesive tape and tape conversions to several industries including aerospace, automotive, construction, clothing, and transportation. The company maintains three product segments: adhesive tapes, liquid adhesives, and adhesive conversions. Adhesives include everything from aluminum foil tapes to vinyl tapes while liquid adhesives are used in applications ranging from eyelash application to fiber optic bonding. As a distributor, the company sells 3M, Avery Dennison, Bemis, Parson Adhesives, and other brands.
-
-
-
-
-
Swift Textile Metalizing, LLC
Conductive Tapes
Company Overview
Swift Textile Metalizing LLC, founded in 1955, is a Connecticut-based manufacturing company specializing in the manufacture and supply of electrically conductive and reflective metalized fabrics. The company manufactures materials that protect against Electromagnetic Interference (EMI), Radio Frequency Interference (RFI), and Static Discharge. The company's fabric options include flexible, lightweight woven, non-woven, and knitted fabrics with a durable nylon base coated with layers of highly conductive metals. The company's product applications span industries such as aerospace, medical equipment, telecommunications, commercial and consumer Electronics.
-
-
-
-
-
JBC Technologies, Inc.
Conductive Tapes
Company Overview
A 3M™ Preferred Converter and world-class die-cutter, JBC Technologies provides innovative die-cut solutions that enable our customers to convert their design concepts into reality. But the impact of what we do goes far beyond converting flexible materials into custom parts. Our customers benefit from our strong engineering focus and emphasis on providing value during the full product lifecycle. This includes everything from a prototype and quick react program that helps you solve last-minute production problems fast to high volume production with lead time strategies tailored to your specific needs.
-
-
-
-
-
Cleanroom Supply
Conductive Tapes
Distributor Overview
Cleanroom Supply is based in Brooklyn Park, Minnesota. Cleanroom Supply is a distributor of products for cleanrooms as well as complete modular cleanroom solutions. Cleanroom Supply products include cleanroom air showers, cleanroom apparel, cleanroom cleaning supplies, cleanroom components, cleanroom pass throughs, furniture, cleanbenches, cleanroom instrumentation, modular cleanrooms, desiccators, fume hoods & glove boxes, gloves, gowning room components, mats, packaging products, safety products, spray guns, ESD static control, storage, swabs, ultrasonic cleaning, ultraviolet equipment, wafer handling, wet process stations, and wipes.
-
-
-
-
-
NCI Inc (formerly Innotech Products)
Conductive Tapes
Distributor Overview
NCI Clean, now part of North Central Instruments, began in 1995 as Innotech Products as a distributor for laboratory and cleanroom equipment. NCI Clean offers modular cleanrooms and products intended for use in cleanrooms such as flooring, paint, filters, curtains, and instrumentation. Other cleanroom equipment include air showers, surge isolation pods, desiccators, cleanbenches, fume hoods, spray guns, glove boxes, anti-fatigue mats, and shoe cleaners. Other equipment includes gowning room furniture and components, cleanroom apparel, microscopes, and supplies such as alcohols, swabs, and wipes.
-
-
-
-
-
Robert McKeown Co., Inc.
Conductive Tapes
Distributor Overview
Robert McKeown Co., Inc., established in 1937, and headquartered in Brunchburg, New Jersey, is a fabricating distributor of electronic assembly materials and equipments. The company specializes in providing application assistance for the design of new products and the redesign of existing products. Their range of products encompasses of electronic tapes, EMI gasket, adhesives, and ESD shields. These products play a crucial role in ensuring proper functioning, and safety of electronic assemblies in industries such as aerospace, medical, and electronics.
-
-
-
-
-
Holland Shielding Systems BV
ELECTRICALLY CONDUCTIVE FOAM TAPE
Manufacturer Overview
Holland Shielding Systems BV, established in 1985 in The Netherlands, started as a manufacturer of electronic components and now produces a wide range of frequency and electrical shielding systems. The company's products include PCB shielding cans, farraday cages, frame gaskets used for farraday-integrated tents, EMI displays, mesh foils to shield against magnetic, low-frequency radio waves, microwave radiation, and equipment used in earthing against high-voltage dangers. Their products are used by the FCC to prevent electromagnetic interference and customize facility shielding systems to protect against eavesdropping.
-
-
-
-
-
Nitto Denko Corporation
Conductive Tape
Manufacturer Overview
Nitto Denko Corporation is a Japanese manufacturer of adhesive tapes, optical films, semiconductors, electronic devices, and consumer products, was founded in 1918 and is headquartered in Osaka. The company operates through several segments, including industrial tape, optronics, human life, and Others. Their products are used in a wide range of industries, including automotive, display, life sciences, and more. They are always one step ahead in making good things happen with their advanced optical films for liquid crystal displays and the ability to create a constant stream of Global Niche Top products.
-
-
-
-
-
E-SONG EMC Co., Ltd.
Conductive Adhesive Tape
Manufacturer Overview
E-SONG EMC Co., Ltd. is a manufacturer EMI shielded & absorbed products and thermal interface products, founded in 1991 and headquartered in South Korea. The company provide ingenious products and services that ensure seamless electronic interactions, minimizing interference and enhancing performance. E-SONG EMC., Ltd expertise spans across industries which offers tailored EMC test, consult, and design services. They are indebted to excellence; they empower clients with dependable solutions that meet regulatory standards and optimize operational efficiency.
-
-
-
-
-
Schlegel Electronic Materials, Inc.
Conductive Tapes
Manufacturer Overview
Schlegel Electronic Materials, Inc. is an EMI shielding and thermal management material manufacturer. Pioneering conductive fabric over foam shielding gaskets in 1987, it's a premier electromagnetic interference (EMI) shielding provider. The company delivers advanced EMI containment and thermal management solutions.Offering Fabric Over Foam Gaskets, Conductive Elastomers, RF Absorber Materials, and enclosure gaskets, serving computing, telecommunications, military, medical, and electronics sectors. Its EMI shielding gaskets come in varied profiles, with attachment options. With a global operations in the U.S., Europe, and Asia, the company ensures unmatched support and service.
-
-
-
-
-
Kowa Kasei Co., Ltd.
EMC protective tape
Manufacturer Overview
Kowa Kasei Co., Ltd. was founded in 1969 and is a manufacturer and supplier of profile extrusion molding products, electric wiring member, and EMC components based in Nagoya, Aichi, Japan. The company's product portofolio including wiring ducts, birdie cutters, wiring protection tubes, noise protectors, and EMC protective tubes. The products have been certified to be RoHS compliant. The company have obtained the ISO 9001 certification in 2002 and ISO 14001 certification in 2003.
-
-
-
-
-
TATSUTA Electric Wire and Cable Co.,Ltd.
Thermal setting conductive bonding film
Manufacturer Overview
Tatsuta Electric Wire and Cable Co. Ltd., established in 1945 and headquartered in Higashiosaka, Japan, is a manufacturer of electric wires, electronic materials, medical products, and sensors. The company began manufacturing and selling telecommunication wires and cables in 1955. In 1981, it started manufacturing water leakage detection systems, and in 1984, it began selling bonding wire. Its telecommunications division received ISO 9001 certification in 1996, and the electric wire and cable division in 1998. The company began the production of EMI shielding film in 2003, and its product portfolio includes broadcasting cables, bonding wires, liquid leakage sensors, and functional paste.
-
-
-
-
-
SEIREN Co., LTD.
Condutive Tape (Double-Sided)
Manufacturer Overview
Seiren Co. LTD., founded in 1889 and headquartered in Tokyo, Japan, is a manufacturer of various textile and non-textile products. The company has diverse business fields, including automotive upholstery, electronics, sports, medical, and environmental material businesses. Its products include precision devices, airbag materials, yarns, civil engineering materials, and cosmetics. It started manufacturing and selling automotive upholstery materials in 1975 and electrically conductive fabric materials in 1984. In 1998, it started selling house exterior wall covering base sheet material, and in 2017, it started selling flexible conductive material.
-
-
-
-
-
Teraoka Seisakusho co.,Ltd.
Copper foil conductive adhesive tape
Manufacturer Overview
Teraoka Seisakusho co.,Ltd., established in 1921 and based in Tokyo, Japan, is a manufacturer and supplier specializing in the production of adhesive tapes. The company’s adhesive tapes portfolio includes removable film adhesive tapes, double-coated adhesive tapes, masking tapes, cloth adhesive tapes, and other types of adhesive tapes. These adhesive tapes find applications in various industries, including automotive, packaging, construction, ecology, and electrical and electronics products. The company holds both ISO 14001 and ISO 9001 certificates for environmental management and quality management.
-
-
-
-
-
MNM COMPOSITES PVT. LTD.
Electrically Conductive Tape
Manufacturer Overview
MNM COMPOSITES PVT. LTD., established in 1996 and located in Maharashtra, India, is a manufacturer and supplier of cellular rubber sheets and gaskets. The company offers a diverse range of products that include hexis films, MNM waterproofing series, die-cut gaskets and seals, self-adhesive paper tape, and hexis films. These products find applications across industries like construction, automotive, manufacturing, and packaging. The company’s products are used for sealing, insulation, waterproofing, and protective functions, ultimately enhancing the performance and durability of diverse products and structures.
-
-
-
-
-
S. V. Industries
Semi Conductive Tapes
Manufacturer Overview
S. V. Industries, established in 1984 and located in Maharashtra, India, is a manufacturer and exporter of packaging tapes, electrical insulation tapes, and insulated cables. The company’s broad range of products includes cotton tapes, silicon-coated fiberglass tapes, rubber-proofed synthetic tape, anti-corrosive tape, and pipe wrapping tape. These products cater to industries such as electrical, construction, manufacturing, and oil and gas. The company’s products are used for electrical insulation, bundling, sealing, corrosion protection, and insulation, thereby enhancing the durability of systems and equipment.
-
-
-
-
-
Parshwa Padmavati Enterprise
Thermal Conductive Tape
Manufacturer Overview
Parshwa Padmavati Enterprise, established in 2015 and located in Maharashtra, India, is a manufacturer and supplier of tapes. The company offers a range of products that include double-sided adhesive tape, protection tape, packing adhesive tape, VHB tape, and insulation tape. These tapes have applications across industries such as manufacturing, construction, packaging, and electronics. The company’s products play essential roles in bonding, protection, sealing, and electrical insulation that are used for the efficiency of processes and applications.
-
-
-
-
-
Vraj Corporation
Thermal Conduction Tape
Manufacturer Overview
Vraj Corporation, established in 2015 and located in Maharashtra, India, is a manufacturer, trader, and wholesaler of tapes. Its diverse range of products includes adhesive tape, masking tape, paper tape, foam tape, and thermal conduction tape. These tapes serve diverse industries such as manufacturing, automotive, construction, electronics, and packaging. The company’s products are used for tasks like packaging and sealing, clean paint lines, labeling and packaging, cushioning and insulation, and heat dissipation in electronic devices, thereby enhancing the functionality of products and processes.
-
-
-
-
-
tesa SE
Electrically Conductive Tapes
Manufacturer Overview
Tesa SE, established in 2001, is a developer and manufacturer of adhesive tapes and self-adhesive product solutions for various industries, commercial customers, and end consumers. The products include furniture, surface protection, security labeling, interior mounting, and mirror assembling are used for bonding products in the automotive, builiding, medical, printing, and appliances industries. Headquartered in Hamburg, Germany, the company operates in 100 countries and operates additional plants in Germany, Italy, China, and the USA, and is in the process of opening another in Vietnam.
-
-
-
-
-
Anamet Europe B.V.
Anamet Hiprotape Light HT-L Grey
Manufacturer Overview
Anamet Europe B.V., established in 1944 and headquartered in Amsterdam, Netherlands, is a manufacturer of flexible conduits, metal hoses, and ancillary products. The company’s products include Anaconda flexible conduits and fittings, corrugated metal hoses, and cable glands. Its brand, Anaconda, provides customizable solutions for various needs, ensuring mechanical protection and flexibility. These products serve the infrastructure, power, and pharma sectors, giving protection and transport solutions for cables, liquids, and gasses in industrial markets. The company’s products are crafted and certified by reputable institutions such as U.L., CSA, and Lloyd’s Register.
-
-
-
-
-
Technetics Group
UNSINTERED PTFE TAPES
Manufacturer Overview
Technetics Group is a sealing and critical component solutions manufacturer founded in 2006 as a subsidiary of EnPro Industries based in Columbia, South Carolina. The company offers a range of products including metal and polymer seals, rupture discs, accumulators and bellows. They also custom design polyether ether ketone (PEEK) rods, plates, disks, and other components. With 13 global manufacturing locations that offer engineering, manufacturing, testing, and prototyping services, Technetics Group serves clients in various markets including energy, life sciences, semiconductors, and aerospace.
-
-
-
-
-
Metal Textiles Corporation
Conductive Tape
Manufacturer Overview
Metal Textiles Corporation, established in 1974 and headquartered in Edison, NJ, United States, is an engineered materials and component designer and manufacturer. The company specializes in providing solutions for automotive, aerospace, and military market segments worldwide. Its solutions include extreme environment solutions in sealing, vibration damping, and filtering. It has experience in complex products and components, such as electronic shielding innovations for critical aerospace applications, gasket reinforcement for the space shuttle cargo door, and pneumatic tool mufflers for the automotive industry. The company's notable clients include Lockheed Martin, General Motors, and Boeing.
-
-
-
-
-
Minoru Co.,Ltd.
Conductive Double-Sided Fabric Tape
Manufacturer Overview
Minoru Co. Ltd., based in Ota, Tokyo, Japan, is a manufacturer of electronic materials for 5G mobile base stations, autonomous driving applications, and electromagnetic wave countermeasures. The company offers RF Absorbers, Thermal Interface Materials, and Conductive Tapes for critical thermal and EMI control applications. Manufactured at its own plant, these products are extensively used in mass production for mobile phones, automotive displays, and consumer devices. The company collaborates with major base stations, automotive electrical component manufacturers, and various partners in fields such as thermal management, and caters to diverse and custom items made especially for a particular project.
-
-
-
-
-
Maxell, Ltd.
Electrically conductive adhesive tape
Manufacturer Overview
Maxell, Ltd., established in 1960 and based in Kyoto, Japan, is a manufacturer of energy products, electrical appliances and industrial materials. The company manufactures batteries for industrial, medical, automotive, communication and other applications. It also produces lens units, oxygen sensors, projectors and functional materials like inks and electromagnetic absorbers. It is also working on developing next-generation technology like air patch battery and MID (Molded Interconnect Device) for forming circuit patterns on three-dimensional surfaces of resin components. The company has acquired IATF 16949 and multiple ISO certifications for quality management system.
-
-
-
-
-
KGS KITAGAWA INDUSTRIES CO., LTD
Conductive tapes and sheets
Manufacturer Overview
KGS Kitagawa Industries Co. Ltd., established in 1963 and headquartered in Inazawa, Aichi, Japan, is a manufacturer of electronic components. The company offers a wide range of products, including EMC components for noise suppression and electromagnetic compatibility, plastic fasteners for securing PCBs and cables, vibration, shock & sound damping materials, thermal management materials, and sputtering functional thin films. The company has obtained ISO9001 certification, ISO14001 certification, IATF16949 certification, and ISO/IEC17025 accreditation.
-
-
-
-
-
4CR International GmbH & Co. KG
1185 Aluminium Tape
Company Overview
4CR International GmbH & Co. KG is a German supplier of automotive refinishing equipment and products that was established in Hamburg in 2004. The company produces putties for repairing dents, abrasives for surface preparation, and primers for bodywork operations. It also offers masking products for taping or protection, as well as degreasers for dirt removal. The company's products are primarily used by automotive manufacturers, dealerships, and garages. It offers custom product development and manufacturing services tailored to unique projects or specific use cases..
-
-
-
-
-
Shenzhen Linmao Electronic Material Co.,Ltd.
Conductive Tape
Company Overview
Shenzhen Linmao Electronic Material Co., Ltd., founded in China in 2016, is a manufacturer and supplier of thermal management solutions. The company offers a variety of products, including thermal conductive tapes, thermal conductive pads, thermal conductive grease, thermal conductive insulation materials, and thermal conductive silicone rubber. In addition to its products, the company provides services like technical support, customization, and product testing for customers such as electronic manufacturers and automotive manufacturers.
-
-
-
-
-
Parafix Tapes & Conversions Ltd
THERMALLY CONDUCTIVE TAPES
Company Overview
Parafix Tapes & Conversions Ltd was founded in the UK in 1969 as a manufacturer and distributor of adhesive tapes, foams, films, foils, and other flexible materials. Its product range includes materials such as foam and rubber, heat management, EMI and more. Double-sided adhesive tapes have become a replacement for traditional attachment methods. Medical adhesive tapes are crafted with different backings and adhesive types, offering features such as breathability and hypoallergenic properties. Electrical insulation tapes play a vital role in product safety, made from substrates and adhesives that meet industrial specifications, including military, UL, CSA, and IEC standards.
-
-
-
-
-
HOPELIGHT ELECTRICAL CO.,LIMITED
Conductive Tape
Company Overview
HOPELIGHT ELECTRICAL CO., LIMITED, established in 2011 and headquartered in Shenzhen, China, specializes in serving as a high-temperature masking tape supplier and adhesive tape manufacturer. The company's product range includes copper tape, Teflon adhesive tape, glass cloth tape, aluminum foil tape, double-sided tape, and more. These products find applications across various industries, including electrical appliances, automobiles, new energy, papermaking and printing, the food industry, and more. The company serves customers from countries such as Romania, Bulgaria, the United Arab Emirates, the Netherlands, and the UK.
-
-
-
-
-
Electrotek Static Controls Private Limited
Conductive Tape
Company Overview
Electrotek Static Controls Private Limited, established in 1993 in New Delhi, China, is a manufacturer, exporter, and B2B supplier of ESD products for scientific, industrial, and defense applications. The company's main products include conductive tape, antistatic tape, and dual bench mount common point ground. It also produces an ESD waste paper basket, a cordless wrist strap, and surface resistivity meters. It also offers a range of PPE and static control clothing and shoe covers, focusing on solutions for the control of static in pharmaceutical, electronics, and manufacturing environments.
-
-
-
-
-
SEIWA ELECTRIC MFG CO.Ltd
Conductive Cloth Tape
Company Overview
Seiwa Electric MFG Co., Ltd is a manufacturer of information display systems, lighting and noise countermeasure equipment, based in Kyoto, founded in 1945 (Samsung Electric Co., Ltd.,) and established in 1949. Their products include: electromagnetic noise countermeasure (EMC), waterproof and shockproof LED information display, their own blue light-emitting diode and white light-emitting diode, tunnel disaster prevention system and road & tsunami information display system. Seiwa Electric acquired ISO14001:2004 certification at all offices. Outside of Japan, they have offices and subsidiaries in Thailand, Vietnam and China.
-
-
-
-
-
KGK Chemical Corporation
Conductive Tape
Company Overview
KGK Chemical Corporation, established on October 30, 1979, in Tokorozawa City, Saitama, is a manufacturer and supplier of adhesive tapes and plastic films. The company's product range comprises Molecule Gradient Tape, May Clean Gel, Liquid Crystal Polymer Film, Heat Storage Gel/Thermal Conductive Gel, and Mechanical Fiber Tape. These products offer features like high-strength adhesion, thermal conduction, and heat resistance. They serve diverse industries, including electronics, automotive, housing and building materials, and medical. In addition to its product offerings, the company provides services such as selling multifunctional films, producing viscous adhesive tape, and punching materials like plastic film.
-
-
-
-
-
Shen Zhen Shu Yan Technology Co., Ltd
Conductive Tape
Company Overview
Shen Zhen Shu Yan Technology Co., Ltd, a company established in 2010, based in Shenzhen, China, is a manufacturer and supplier of adhesive tape materials and solutions. The company provides various products such as high-temperature tape, insulation tape, conductive tape, foam tape, double-sided tape, and silicone foam. These products are used in industries like electronics, automotive, new energy, solar energy, construction, LED lighting, etc. It also offers customer services that include technical support, catalog request, and customized die-cutting and is the professional tape manufacturer in China.
-
-
-
-
-
Techinstro
Copper Foil Conductive Tape
Company Overview
Techinstro Industries is a manufacturer and supplier of nanotechnology, environmental, and solar energy products in Nagpur, India and was established in 2009. The company’s main product lines include graphene, nanoparticles, metal foam, valves and fittings, gas sampling bags, conductive coating, TCOs, and photochemical reactor. These products are used for various applications in industries such as aeronautical, display technology, electronic and telecommunication, environmental, pharmaceutical, and solar energy. It also offers customized services and technical support to its customers.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ARITECH CHEMAZONE PVT LTD.
Copper Foil Conductive Tape
Company Overview
Established in 2016, with headquarter in Haryana, India, Aritech Chemazone Pvt Ltd, manufactures Nanoparticles and chemical products. The company produces Graphene, Nano Diamonds, Quantum Dots, and Metal Powder that are used in industries that work with Nano Technology. They specialize in Aluminum Oxide Nanoparticles, Zinc Oxide Nanoparticles, Artificial Saliva, Barium Oxide Powder, and Ti2C Mxene Powder along with they offer Mo2C Mxene Powder, V2C Mxene Powder, Nb2C Mxene Powder, and, Titanium Dioxide Anatase Powder, and these products have applications in various commercial industries.
-
-
-
-
-
SEKISUI CHEMICAL CO., LTD.
Conductive Tape
-
-
-
-
Distributor Overview
Tape India is an exporter, importer and supplier of various assortments of industrial tapes and adhesives, established in 1957 at Chennai, India. The company is a major supplier of contemporary adhesive materials and tapes for multiple uses in various industries including packaging. The products comprise BOPP tapes, foam tapes, double-sided tapes, floor marking tapes and copper foil tapes that offers robust packaging solutions. These tapes also find uses in electrical, construction industries and fluid control applications. The tapes are anti-slip, anti-dust and have moisture-repelling capacities that offer endurance, sustainability and performance. They allow tape length selection based on the needs.
-
-
-
-
Conductive Tape Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Maxell, Ltd. |
7.6%
|
| 2 | CS Hyde Company |
5.7%
|
| 3 | Shenzhen Linmao Electronic Material Co.,Ltd. |
4.8%
|
| 4 | Metal Textiles Corporation |
3.8%
|
| 5 | Swift Textile Metalizing, LLC |
3.8%
|
| 6 | SEIWA ELECTRIC MFG CO.Ltd |
3.8%
|
| 7 | Kowa Kasei Co., Ltd. |
3.8%
|
| 8 | Anamet Europe B.V. |
2.9%
|
| 9 | SPECIALITY TAPES INDUSTRY |
2.9%
|
| 10 | Cleanroom Supply |
2.9%
|
Derivation Method
The ranking is calculated based on the click share within the conductive tape page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Nitto Denko Corporation: 28,371
- SEIREN Co., LTD.: 6,806
- EMKA Beschlagteile GmbH & Co. KG: 2,100
Newly Established Company
- Dongguan Xinlong Electronic Materials Co., Lt: 2018 (6 years ago)
- Shenzhen Linmao Electronic Material Co.,Ltd.: 2016 (8 years ago)
- ARITECH CHEMAZONE PVT LTD.: 2016 (8 years ago)
Company with a History
- SEIREN Co., LTD.: 1889 (135 years ago)
- Teraoka Seisakusho co.,Ltd.: 1921 (103 years ago)
- EMKA Beschlagteile GmbH & Co. KG: 1932 (92 years ago)
Conductive Tape Manufacturers in United States
*Including some distributors, etc.
- 3M
- CS Hyde Company
- Can-Do National Tape, Inc.
- Swift Textile Metalizing, LLC
- JBC Technologies, Inc.
- Cleanroom Supply
- NCI Inc (formerly Innotech Products)
- Robert McKeown Co., Inc.
Global Distribution of Conductive Tape Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
India
|
10 | 23.3% |
China
|
9 | 20.9% |
United States of America
|
8 | 18.6% |
Japan
|
8 | 18.6% |
Germany
|
4 | 9.3% |
Netherlands
|
1 | 2.3% |
Republic of Korea
|
1 | 2.3% |
Hong Kong
|
1 | 2.3% |
United Kingdom
|
1 | 2.3% |
List of Conductive Tape Products
51 products are listed.
DIC CORPORATION
Industrial adhesive tape Dietic foil / special substrate type single -sided tape shield conductive non -woven fabric
50+ people viewing
･ It is a conductive part -sided tape of conductive non -woven fabric base material. ･ Because it is excellent in flexibility, it can be pasted on ...
DIC CORPORATION
Industrial adhesive tape Dietic foil / special substrate type double -sided tape conductor
40+ people viewing
Suitable for adhesion of components that require high conductivity and shielding.
DIC CORPORATION
Industrial adhesive tape Daitack base material Les type double -sided tape conductivity
40+ people viewing
･ Using conductive adhesive is a double -sided tape. ･ It can be used to adhere to places that require conductivity.
Denka Electron
Copper foil tape
50+ people viewing
Special copper foil shield tape It is highly conductive by wrapping or pasting shielded copper foil. It can also be used for electromagnetic shie...
