1. Metoree
  2. Fastening Components
  3. Brackets
Description 122 Manufacturers 32 Products
World Magnetics
Workmaster
Witels Albert USA, Ltd.
White Racker Co.
Wharton Hardware and Supply
Western Enterprises
Westerfield Sales and Service
Vital Parts
Valley Design Enterprises, Inc.
Vaccon Co., Inc.
USTEK Incorporated
Transmotec

122 Bracket Manufacturers in 2024

This section provides an overview for brackets as well as their applications and principles. Also, please take a look at the list of 122 bracket manufacturers and their company rankings. Here are the top-ranked bracket companies as of November, 2024: 1.Granat Industries, Inc., 2.EKENA MILLWORK, 3.LCS Company.

Table of Contents

What Is a Bracket?

Brackets

A bracket is an L-shaped piece of hardware used to support a structure. They are sometimes called "braces."

Brackets are used to secure a vertical surface, such as a wall or column, to a member that projects horizontally from the vertical surface, using bolts or other means.

Brackets are used to secure heavy or long members because they support horizontal members and allow for a large load capacity, which is the weight the member can bear without deformation or damage.

Uses of Brackets

Brackets are used to secure and support members by fastening one side of the L-shaped bracket to a wall or column and the other side to the structure.

Since brackets can easily fix a structure perpendicular to the base member by simply fixing it with bolts, they are used in many applications. These include the interiors of homes and offices, fixing various machines and beams in factories, and securing scaffolds.

Appropriate brackets are selected according to the weight of the structure to be secured, the required load capacity, and the position where the load is to be applied, to ensure sufficient strength.

Principle of Brackets

When a heavy or heavily loaded member is fastened to a wall at both ends or only on one side, the load is concentrated at the fastening point, which may cause the wall to break and the member to fall.

In addition, when securing a bendable member such as a long bar or a thin plate, if the member is secured locally at only one end, the deflection will be so great that the center of the member will not be able to withstand the bending stress and may fail, increasing the risk.

Brackets are used to secure the member to the wall, reducing the risk of wall or member failure by extending the anchorage to a certain distance from the edge of the member. If there is a source of vibration, such as from a motor drive, brackets also help reduce the propagation of vibration due to the increased rigidity of the member.

In addition, by securing with brackets, bolts can be prevented from breaking because only vertical forces are applied to the bolts. In contrast, shear loads are applied to the bolts when they are secured directly to the wall without brackets.

List of 122 Bracket Manufacturers

*Including some distributors, etc.

Sort by Features

  • Default
  • Company Size: largest first
  • Year Founded: oldest first
  • Year Founded: earliest first

Sort by Area

  • United States of America
  • Canada
  • China
  • France
  • Germany
  • Italy
  • Japan
  • Turkey
  • United Kingdom
    • Panduit
      • United States of America Address: 18900 Panduit Drive, Tinley Park, Illinois, United States of America

      Manufacturer Overview

      PANDUIT was founded by Jack E. Caveney and opened the door for its clients in 1955. The company is specialized in developing advanced physical electrical and network infrastructure solutions such as data centers, office facilities, processing lines, audio video systems, etc., across different markets. PANDUIT designs builds, and installs advanced software and solutions for their clients. Hence, they have been granted 2000 Patents. The company has a labor force of 5000 employees.

    • Perfection Spring & Stamping Corp.
      • United States of America Address: 1449 E. Algonquin Rd. Mount Prospect, Illinois, United States of America

      Manufacturer Overview

      Perfection Spring & Stamping Corp., since 1955, has been a supplier and manufacturer of precision metal-formed components in Mount Prospect, IL, USA. The components include stamped chassis, metal brackets, heat sinks, and mechanical assemblies for mounting features, supports, and tube holders. The company offers capabilities such as progressive and four-slide stampings, wire forms, raw material selection, part washing, and springs such as extension, compression, and torsion. The company is ISO 14001:2015 certified, PPAP approved, IATF 16949:2016 registered, and Technical Part Cleanliness.

    • EKENA MILLWORK
      • United States of America Address: 2300 West Main St. Clarksville, Texas, United States of America

      Manufacturer Overview

      EKENA MILLWORK, founded in 2009, is headquartered in Fredericksburg, Virginia, USA, as a manufacturer of architectural products and custom solutions. The company’s product range includes architectural elements such as decorative millwork, corbels, brackets, ceiling medallions, and moldings. It also embraces digital transformation by integrating cloud solutions, artificial intelligence (AI), and automation, ensuring efficient production. The company has gained the Tech Innovator Award in 2017 and the Digital Transformation Excellence Award in 2019. The company caters to a diverse clientele, encompassing architects, builders, designers, and homeowners.

    • 3M
      • United States of America Address: 3M Center, St. Paul, Minnesota, United States of America

      Manufacturer Overview

      3M Company was founded in 1902 and is headquartered in St. Paul, Minnesota. 3M provides diversified technology services globally. 3M operates through four segments: Safety and Industrial, Transportation and Electronics, Health Care, and Consumer. The Safety and Industrial segment offerings include industrial abrasives, masking, and natural and color-coated mineral granules for shingles. The Transportation and Electronics segment offerings include ceramic solutions, light management films, and electronics assembly solutions. The Healthcare segment offerings include wound care, dentistry and orthodontia solutions, and filtration and purification systems. The Consumer segment offerings include consumer bandages, picture hanging, and stationery products.

    • LCS Company
      • United States of America Address: 1480 SIBLEY MEMORIAL HIGHWAY, ST. PAUL, Minnesota, United States of America

      Manufacturer Overview

      LCS Company started in 1959, is a manufacturer of motor laminations and precision metal parts, including starter generators, pumps, conveyors, fluid control systems, and transformers for energy & power generation, transportation, industrial & motion control, aerospace, and military & defense industries. The St. Paul, Minnesota-based company provides services like custom metal stamping, micro and small stampings, custom shims and washers, and full in-house tooling capabilities with a capacity of 10 tons to 330 tons. The business complies with the quality management systems specified in ISO 9001:2015, AS 9100, and AS 9003.

    • Marlin Steel Wire Products

      • Marlin Steel Wire Products
        Brackets

      • United States of America Address: 2648 Merchant Drive, Baltimore, Maryland, United States of America

      Manufacturer Overview

      Marlin Steel Wire Products LLC, founded in 1968, is a manufacturer of custom metal forms, currently based in Baltimore, Maryland, USA. Their product range includes stainless steel parts washing baskets, racks, S-hooks, and sheet metal material handling containers. The company holds an ISO 9001:2015 certificate from the International Quality Registrars (IQR) Corporation for the "Design and Manufacture of Wire and Sheet Metal Products and Specialty Tooling. They cater to various industries, such as aerospace, defense, medical, food processing, and automotive. They provide over 40 finishes, including Electropolishing, Teflon, Nylon, Halar, Powder, and Plastic coating.

    • MetalFab Group
      • United States of America Address: 10145 Philipp Pkwy Streetsboro, Ohio, United States of America

      Manufacturer Overview

      MetalFab Group is a Streetsboro, Ohio-based contract manufacturer specializing in metal machining and fabrication. Founded in 2003, the company offers comprehensive fabrication services — such as laser and waterjet cutting, welding, bending, turning, and assembly — for clients in a broad range of industries including industrial machinery, agriculture and the military. The company produces various metal models, prototypes, parts, and components, as well as assemblies and subassemblies. These supply client manufacturers like Caterpillar, Boeing, and Nestle.

    • Fedtech, Inc.
      • United States of America Address: 4763 Mustang Circle, Mounds View, Minnesota, United States of America

      Manufacturer Overview

      FedTech was founded in 1996 and is headquartered in Mounds View, Minnesota. The ISO 9001:2015 certified company is a manufacturer and value-added service provider of machining services for several industries including automotive, aerospace, medical, and manufacturing industries. The company’s vertically integrated machining services include laser and waterjet cutting, CNC machining, metal fabrication, and finishing services. Services include assembly and sub-assembly, heat treating, liquid and powder painting, packaging & kitting, and custom material procurement.

    • Madsen Wire Products
      • United States of America Address: 101 Madsen Street, Orland, Indiana, United States of America

      Manufacturer Overview

      Madsen Wire Products, headquartered in Orland, Indiana, has been a custom manufacturer specializing in the production of wire-based solutions since 1938. The company offers custom wire forms, wire racks, wire grids, wire guards, and wire baskets. These products serve diverse applications in industries such as automotive, medical, retail, and agriculture, offering efficient organization, display, and containment solutions. The company is equipped with cutting-edge technology including CNC Aim Wire Benders, press brakes, tube benders, and welding systems. Additionally, finishing through powder coating and plating services is also available.

    • AmeriTex Machine & Fabrication, LLC

      • AmeriTex Machine & Fabrication, LLC
        Brackets

      • United States of America Address: 700 Conreo Park North Conreo, Texas, United States of America

      Manufacturer Overview

      AmeriTex Machine & Fabrication, LLC (ATMF) is a contract manufacturer of custom metal products that was established in Conroe, Texas in 2004. The company produces various metal products to customer specifications, using capabilities such as CNC machining, punching, and press brake forming. It also offers sheet and tube laser cutting, sheet and plate rolling of pieces up to 6 feet long and 0.5 inch thick, welding, and hardware insertion services. ATMF mainly serves clients in the oil and gas, transportation, construction, and defense industries.

      • United States of America Address: 15 Merchant St., Sharon, Massachusetts, United States of America

      Manufacturer Overview

      InMetal is an American ISO 9001 certified contract manufacturer specializing in sheet metal fabrication that was established in 1961 and based in Sharon, Massachusetts. The company offers various fabrication and assembly services such as CNC laser cutting, forming, milling, and robotic welding. They work with a wide range of metals including stainless steel, aluminum, galvanized steel, and other alloys to produce items such as laboratory instruments, belt guards, enclosures, and machine covers. InMetal primarily serves clients in computer component and peripherals production, telecommunications, biotech manufacturing, and semiconductor fabrication.

    • Western Enterprises
      • United States of America Address: 875 Bassett Road Westlake, Ohio, United States of America

      Manufacturer Overview

      Western Enterprises provides products for control, storage, and transmisson of gases to industrial and medical markets. They are located in the United States of America in the state of Ohio in the city of Westlake. The company was founded in the year 1952 and strives to provide high quality produccts such as medical regulators, flowmeters, and pipe fittings. Many of their products are useful for appliances such as air conditioners and heaters.

    • Ruland Manufacturing Co., Inc.

      • Ruland Manufacturing Co., Inc.
        Brackets

      • United States of America Address: 6 Hayes Memorial Drive, Marlborough, Massachusetts, United States of America

      Manufacturer Overview

      Ruland Manufacturing Co., Ltd. was founded in 1937 and is headquartered in Marlborough, Massachusetts. The ISO 9001:2015-certified company began by creating a wide range of products such as bicycle tire pumps and various fittings. The company pivoted strategies in the 1970s to manufacture fittings such as shaft collars and couplings, which are now used in medical devices, robotic systems, food processing, and in machine tools. The company’s current product list includes machine components, rubber bumpers, rollers, couplings, and indexing plungers.

    • World Magnetics
      • United States of America Address: 810 Hastings Street, Traverse City, Michigan, United States of America

      Manufacturer Overview

      World Magnetics is a manufacturer and producer of a broad range of low and high pressure, vacuum, differential switches, magnetic heads and magnetic sensors for high-end applications. They came into inception in 1962 and located at USA. They offer domestic, on-site production and shipping to customers globally. The company also provides custom design and engineered pressure switches, magnetic heads, special projects, and applications. Their allegiance to technological innovation has resulted in advanced pressure sensing solutions that add to the efficiency and safety of industrial processes.

    • ETM Manufacturing
      • United States of America Address: 24 Porter Rd., Littleton, Massachusetts, United States of America

      Manufacturer Overview

      ETM Manufacturing was founded in 1969 and is a manufacturer of sheet metals, machining, and assembly. Sheet products range from small parts like brackets, washers, connectors, and plates to large parts like doors, panels, and light boxes and enclosures made from aluminum, stainless steel, copper, brass, and plastics for the industrial laser, robotics, medical, renewable energy, and retail display industries. The company in Littleton, MA, offers painting, silkscreen, plating, laser etching, and finishing services the ISO 9001:2015-certified organization provides.

    • 3 AXIS Development, Inc.
      • United States of America Address: 7200 Brunswick Cir, Boynton Beach, Florida, United States of America

      Manufacturer Overview

      3Axis Development was founded in 2005 and is headquartered in Boynton Beach, Florida. 3Axis is a manufacturer of custom machinery, equipment, and tools. 3Axis offers prototyping services such as stereolithography, FDM, SLS, DMLS, 3D architectural modeling, and 3D printing. 3Axis also offers numerous manufacturing services such as injection molding, plastic prototype extrusions, waterjet cutting, precision sand castings, sheet metal fabrication, vacuum & pressure forming, Swiss CNC machining, carbon fiber prototypes, 3D custom signage, fiberglass fabrication, and medical device engineering.

    • Amperite Co.
      • United States of America Address: 1250 Crispin Drive, Elgin, Illinois, United States of America

      Manufacturer Overview

      Amperite Co., through OlympicControls Corp., was founded in 1968 with roots going back to 1922. The company serves military and industrial market segments with motor controls, circuit controls, alarms, and other systems. The company offers four specific, focused business units that maintain identities in separate end-user applications: Amperite Co., OlympicControls Relays, T-Bar Relays, switches, and Fuel Pumps. Amperite manufactures time delay relays, flashers, and controlling devices. OlympicControls offers customized products manufactured to customer specifications. T-Bar Relays serves OEMs and customers such as Raytheon and Learjet. Fuel Pumps serve military and heavy-duty trucks.

    • J.W. Winco, Inc.
      • United States of America Address: 2815 South Calhoun Road, New Berlin, Wisconsin, United States of America

      Manufacturer Overview

      J.W. Winco was originally founded as Ganter in 1894 in Germany. Winco specializes in parts manufacturing. Parts offerings the operating parts segment including handles, adjusting, and positioning parts; clamping parts segment featuring tensioning, clamping, switching, and levers; and finally the machine parts segment with indexing, locking, mounting, connecting elements, guides, spindles, rollers, magnets, casters, and wheels. Winco’s complete catalog contains over 75,000 standard parts. Winco is also ISO 9001 certified. Winco offers free CAD downloads and technical documentation for many arts.

    • Mammoth Products, Inc.
      • United States of America Address: 3701 W. Central Ave., Santa Ana, California, United States of America

      Manufacturer Overview

      Mammoth Products Inc., established in 1987 and located in Southern California, is a manufacturer of packaging materials and shipping room supplies. The company specializes in providing a range of packaging materials, including foam, wood, corrugated, and plastic, along with a comprehensive selection of shipping room supplies. Its government-approved MIL-I-45208 inspection procedure aligns with the requirements of military customers, while the ISPM-15 approved wood packaging materials cater to the needs of exporting customers by providing all necessary certifications for both materials and processes.

    • White Racker Co.
      • United States of America Address: 420 S. Lively Blvd., Elk Grove Village, Illinois, United States of America

      Manufacturer Overview

      While Racker Company was founded in 1894 and is headquartered in Elk Grove Village, Illinois. The company is a manufacturer servicer, and design engineer of plumbing and CNC machining-related needs for residential, commercial, and industrial customers. The company’s three product categories are marble toilet partition hardware, commercial plumbing, and CNC machining. CNC machining services include aluminum and brass casting, CNC milling, and CNC turning and boring. Marble toilet partition hardware offerings include stall door hardware, stirrups and angles, standards and rails, and anti-theft fasteners. Commercial plumbing products include pipe supports, chrome plated fittings and pipes, and urinal fittings.

    • USTEK Incorporated
      • United States of America Address: 4663 Executive Drive Suite #3 Columbus, Ohio, United States of America

      Manufacturer Overview

      USTEK Incorporated (USTEK) is an American contract manufacturer specializing in bare circuit boards and related products that was established in 1987 as a spin-off of Scientific Advances Inc., the technology commercialization arm of Battelle Memorial Institute. Based in Columbus, Ohio, the company produces printed circuit boards (PCB), heat sinks, flex boards, and magnetics. It also provides circuit boards with special features or functionalities (e.g. buried vias, high-density interconnects), as well as related items such as brackets and bezels. These are all designed, fabricated, and completed according to specifications provided by its clients.

    • Bansbach Easylift
      • United States of America Address: 50 West Drive, Melbourne, Florida, United States of America

      Manufacturer Overview

      Bansbach easylift is a manufacturer of motion control solutions, since 1919 producing a wide range of lockable gas springs, dampers, shock absorbers, and connecting parts. Based in Melbourne, Florida, Bansbach easylift has ISO 9001:2008 certification, ITAR Registration, and EASA Part 21G Form 1 certification. The company uses environmentally friendly materials along with stringent QC measures for consistent and accurate production. Their products are applied in diverse range of industries including automotive, furniture, machinery, medical, and aerospace.

    • Rosco Vision Systems
      • United States of America Address: 90-21 144th PI Jamica, New York, United States of America

      Manufacturer Overview

      Rosco, headquartered in New York City, has been a global supplier and manufacturer of vision safety solutions since 1907. Its safety-centric products include accident-preventing backup cameras, sun-visible monitors, sensor kits for blind-spot and lane departure alerts, the Dual-Vision camera system for comprehensive visibility, and DV6 powered by RoscoLive – a cloud-based live-view and video recording system. Its intelligent solutions utilizes of AI, advanced collision avoidance systems, and cloud-based SaaS platforms that enhance safety, fleet efficiency, and driver productivity.

    • Workmaster
      • United States of America Address: 284 Three Tun Rd Malvern, Pennsylvania, United States of America

      Manufacturer Overview

      Workmaster is based in Malvern, Pennsylvania as a manufacturer of unloading equipment for hopper bottom railcars, and other powder and bulk solids handling equipment designed to help customers operate more safely and efficiently, increase the lifespan of production critical equipment, and decrease operating and maintenance costs of equipment used in heavy duty industrial situations. The company’s product lines include machinery, consumables such as oils and lubricants, and equipment such as programmable timers. Machinery offerings include pneumatic aid systems, bulk trailer trap openers, hopper car vibrators, hopper car connectors, and hopper car gate openers.

    • George P. Coyle & Sons, Inc.

      • George P. Coyle & Sons, Inc.
        Brackets

      • United States of America Address: 2361 Dennis St., Jacksonville, Florida, United States of America

      Manufacturer Overview

      George P. Coyle & Sons, Inc. (GPCS) is an American commercial contractor and manufacturer of building utilities that was established in Jacksonville, Florida in 1927. The company primarily produces, installs and repairs various functional building utilities. These include ornamental, chain link, or vinyl fencing models with different gate openers and access control systems, bathroom partitions, various overhead doors (e.g. sectional doors, rolling steel doors), and a range of awnings. It also offers movable wall panels and building hardware for construction projects. GPCS primarily serves educational institutions and government facilities, as well as clients within the commercial and transportation sectors.

    • American Precision Assemblers, Inc.

      • American Precision Assemblers, Inc.
        Brackets

      • United States of America Address: 120 Rowell Road Hampshire, Illinois, United States of America

      Manufacturer Overview

      American Precision Assemblers, Inc. (APA) is an American contract manufacturer specializing in electrical design and assembly services that was established in 1992 in Hampshire, Illinois. The company offers design engineering, prototyping, quality control, and testing services for various electrical products produced according to customer specifications. These include mechanical and electrical sub-assemblies, cable assemblies, and wire harnesses tailored for quality, efficiency or cost-effectiveness. APA primarily serves clients in the automotive, defense, aerospace, and military sectors.

    • General Manufacturing, Inc.

      • General Manufacturing, Inc.
        Brackets

      • United States of America Address: 1336 West Wiley Avenue, Bluffton, Indiana, United States of America

      Manufacturer Overview

      General Manufacturing, Inc. is an American manufacturer of power supply and portable lighting systems that was established in Fort Wayne, Indiana in 1962 before relocating to Bluffton in 2004. Under the brand name Saf-T-Lite, the company produces various power supply systems including multi-outlet transformers and power reels, as well as machine, maintenance, hazardous environment, and cordless LED lighting systems. It also offers contract manufacturing of power and lighting products for unique customer projects. General Manufacturing chiefly serves OEMs and clients in the shipbuilding, industrial manufacturing, military, and automotive sectors.

    • Sprinter Marking, Inc.
      • United States of America Address: 1805 Chandlersville Rd., Zanesville, Ohio, United States of America

      Manufacturer Overview

      Sprinter Marking, established in 1972 in Zanesville, Ohio, USA, is a manufacturer and supplier of industrial marking and coding solutions. The company's main products include quality inkjet printers, laser marking systems, and contact ink marking machines used in various industries such as packaging, automotive, and electronics. Sprinter Marking's marking and coding solutions play a crucial role in providing clear and durable product identification, enhancing traceability and brand visibility. Sprinter Marking offers customized solutions tailored to meet the unique marking requirements of its clients. The company's dependable and efficient marking solutions are counted on for their accuracy, speed, and durability.

    • Maedler North America
      • United States of America Address: 3135 Lakewood Ranch Blvd #107, Bradenton, Florida, United States of America

      Manufacturer Overview

      Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.

    • Classic Sheet Metal, Inc.
      • United States of America Address: 1515 W. Wrightwood Ct., Addison, Illinois, United States of America

      Manufacturer Overview

      Classic Sheet Metal, established in 1962, is an ISO 9001:2015 certified manufacturer of sheet metal fabrication based in Addison, IL. The company offers various services including design & engineering consulting, inventory management, as well as fabrication capabilities such as punching, stamping, and laser cutting, serving the telecommunications, electronics, energy, transportation, and medical industries. Classic Sheet Metal also provides welding services and contract assembly for other companies adopting the assembly areas to handle multiple electro-static discharge stations.

    • Gorlitz Sewer & Drain, Inc.

      • Gorlitz Sewer & Drain, Inc.
        Brackets

      • United States of America Address: 10132 Norwalk Blvd., Santa Fe Springs, California, United States of America

      Manufacturer Overview

      Gorlitz Sewer & Drain, Inc, founded in 1980, is a California-based manufacturer of sewer and drain cleaning equipment. The company’s products consist of sewer and drain cleaning machines, hoses, inspection cameras, pipe location equipment, and plumbing tools. The products range from lightweight to heavy-duty and are made from corrosion-proof steel. As such, its main consumer base is service technicians in the construction and plumbing industries for use in sewer and pipe construction and repair.

    • Opticonx
      • United States of America Address: 45 Danco Rd, Putnam, Connecticut, United States of America

      Manufacturer Overview

      Opticonx was founded in 1995 and is headquartered in Putnam, Connecticut. The company is a manufacturer of standard and custom fiber optic cabling components and systems used in aerospace, biomedical, network installation, and wireless infrastructure markets. The company’s three product groups are Specially Fiber Solutions such as fiber optic filters and plastic optical fiber, Network Cabling Solutions such as fiber optic cables and adapter panels, and Fiber aSsembly Components including cable assemblies and custom breakout products.

    • NEWKO Prototype & Short Run Stampings

      • NEWKO Prototype & Short Run Stampings
        Brackets

      • United States of America Address: 720 S. Vermont St. Palatine, Illinois, United States of America

      Manufacturer Overview

      NEWKO Prototype & Short Run Stampings, founded in 1996 and headquartered in Palatine, Illinois, is a manufacturer specializing in crafting precision metal stampings and components. Its services encompass prototype metal stampings, short-run metal stampings, sheet metal fabrication, CNC machining, as well as laser cutting, wire EDM, and more. The company offers a comprehensive array of products to meet diverse industry needs, including terminals for electrical connections like ring, spade, and blade terminals, and contacts for circuit control such as spring, leaf, and pin contacts. The company also provides shields for safeguarding devices from interference, and brackets for supporting and mounting components.

    • Electronic Controls Corp. (ECC), Div. of Selco Products

      • Electronic Controls Corp. (ECC), Div. of Selco Products
        Brackets

      • United States of America Address: 8780 Technology Way, Reno, Nevada, United States of America

      Manufacturer Overview

      Selco Products was founded in 1958 and is headquartered in Reno, Nevada. The ISO 9001:2008-certified company is a global manufacturer of customized electronic components. The company serves several markets including medical, HVAC, electronics, and aerospace OEMs and end-user companies, leveraging JIT delivery, Kansan, and engineering support. Electronics offerings include thermistors, temperature controls, panel instruments, and signal converters. Non-electronics include buttons, knobs, and other accessories used in digital and analog electronics controls.

    • Daisy Data Displays, Inc.
      • United States of America Address: 5031 Richard Ln, Suite 103 Mechanicsburg, Pennsylvania, United States of America

      Manufacturer Overview

      Daisy Data Displays, Inc., established in 1983 in New Cumberland, Pennsylvania, is a manufacturer of industrial computers and monitors. Some of their products include rugged computers and monitors which serve purposes like process control, machine vision, video surveillance, and HMI. Their products are designed for harsh environments and find applications in various industries, such as manufacturing, food and beverage, healthcare, transportation, and utilities. Daisy Data Displays also offers other products like keyboards, mice, and KVM switches. The company holds ISO 9001:2015, UL listing, and CE certifications for its quality management system.

    • Brown Wood, Inc.
      • United States of America Address: 7040 North Lawndale Avenue; Lincolnwood, Illinois, United States of America

      Manufacturer Overview

      Brown Wood Inc., established in 1927 and located in Lincolnwood, Illinois, is a manufacturer and supplier of wood components and custom millwork solutions. The company operates through two distinct brands: Made To Spec, specializing in custom wood components, and Designs of Distinction, which focuses on providing architectural millwork solutions. Their product range includes decorative moldings, furniture legs, cabinet components, and more. These products are used in industries such as furniture manufacturing, cabinetry, architectural design, and interior decoration. Brown Wood Inc. is FSC certified, ensuring responsible sourcing of wood materials and sustainable manufacturing practices.

    • Baker Stamping Metal Products, The W. J. Baker Company

      • Baker Stamping Metal Products, The W. J. Baker Company
        Brackets

      • United States of America Address: 120 South Street Wilder, Kentucky, United States of America

      Manufacturer Overview

      Baker Stamping Metal Products, established in Wilder, KY in 1899, is a manufacturer of tubular products for the bedding industry. The company's product portfolio includes Headboards and Footboards, Bunk Bed Rails, Box Springs and metal stamp products. Their products are used for optimizing air circulation and prolonging the life of mattresses and supporting for various mattress sizes and styles. The company serves industries including Mattress Manufacturers, Bedding Retailers, Hospitality and Hotel Industry and E-commerce Bedding Platforms. The company also offers customer services that include support, custom research projects, national delivery and customized services.

    • Granat Industries, Inc.
      • United States of America Address: 875 Nicholas, Elk Grove Village, Illinois, United States of America

      Manufacturer Overview

      Granat Industries, Inc. is an American manufacturer of metal and plastic fastening products that was established in Elk Grove Village, Illinois in 1922. The company offers various types of plastic and metal fastening equipment such as strap assemblies, hook-and-loop sets, semi-tubular rivets, and webbing. It also provides engineering services for custom projects. Granat products have a wide range of applications including in outdoor recreational activities, military or law enforcement operations, logistics (e.g. cargo tie-downs), and safety equipment.

    • Mallory Industries, Inc.
      • United States of America Address: 33 Spring Lane, Farmington, Connecticut, United States of America

      Manufacturer Overview

      Mallory Industries, founded in 1956 and based in Farmington, CT, U.S., is a manufacturer of precision components and assemblies for the aerospace, energy, and commercial markets. The company provides machining of aluminum, titanium, high-temperature alloys, and stainless steel with an emphasis on 2D & 3D cams for aerospace and commercial applications. They offer adapters, housings, sleeves, and rings along with valves, flanges, pistons, shafts, and actuators. They deliver services including multi-axis turning, CNC vertical milling, CNC turning, wire electrical discharge machining, and gearing that find uses in the military, automobile, aerospace, and oil & gas industries.

    • Amfas International Inc
      • United States of America Address: 1661 International Drive Suite 400 Memphis, Tennessee, United States of America

      Manufacturer Overview

      Amfas International Inc, founded in 2002 and based in Memphis, Tennessee, is a manufacturer and supplier of custom metal and plastic components. The metal part capabilities include CNC machinings, stamping, aluminum extrusion, and metal injections. The organization provides logistics services ranging from transportation to correct customs and duty documentation and quick prototyping. The plastic parts are rotational & blow molding, thermoforming, and 3D printing. The ISO 9001-certified company caters to the aviation, oil & gas, industrial, electronics, and medical sectors.

    • Serra Manufacturing Corp.
      • United States of America Address: 3039 E. Las Hermanas Street, Compton, California, United States of America

      Manufacturer Overview

      Serra Manufacturing Corp. (SMC) is an American contract manufacturer specializing in precision stamping and machining that was established in Compon, California in 1959. The company’s capabilities include double disc grinding and deburring, CNC machining, and Six Sigma and lean manufacturing for maximal time or cost efficiency. It primarily produces gaskets, brackets, shims, washers, and rings tailored to customer specifications. SMC mainly serves clients in the aerospace, defense, and construction industries, which include Lockheed Martin, SpaceX, and Virgin Galactic.

    • Gemco Mfg. Co., Inc.
      • United States of America Address: 555 West Queen Street, Southington, Connecticut, United States of America

      Manufacturer Overview

      Gemco Mfg. Co., Inc. (GMC) is an American contract manufacturer specializing in metal stamping services that was established in Southington, Connecticut in 1943. The company primarily offers progressive die, fourslide, and power press metal stamping capabilities, as well as wire forming and assembly services. It also provides engineering support (e.g. design assistance, tooling development) in the production of metal parts or components to customer specifications. GMC mainly serves clients in the aerospace, automotive, defense, and consumer electronics sectors.

    • Transducer Techniques, LLC

      • Transducer Techniques, LLC
        Brackets

      • United States of America Address: 42480 Rio Nedo Road, Temecula, California, United States of America

      Manufacturer Overview

      Transducer Techniques was established in 1979 and is headquartered in Temecula, California. Transducer Techniques designs and manufactures a complete line of load cells, torque sensors, special purpose transducers and related instrumentation that are often used in industries such as process control and factory automation as well as other fields of science and industry. Transducer Techniques product segments include load cells such as button and beam load cells, torque sensors such as reaction and rotary torque sensors, instrumentation with load cell displays and signal condition, accessories, and software.

    • Connective Design, Inc.
      • United States of America Address: 3010 South Tech. Blvd. Miamisburg, Ohio, United States of America

      Manufacturer Overview

      Connective Design, Inc., also known as CDI, was founded in 1991 and is based in Miamisburg, Ohio. The company is an in-house designer of components for the military, transit, medical, robotics, and manufacturing sectors. The company also reverse engineers, prototypes, and manufactures obsoleted components in ISO 9001:2015-certified facilities. Examples of the company’s product offerings include custom connectors, contacts, enclosures, and harnesses. The company also offers a full line of kitting & assembly services, sheet metal fabrication, and machining services.

    • Pyromation
      • United States of America Address: 5211 Industrial Road, Fort Wayne, Indiana, United States of America

      Manufacturer Overview

      Pyromation began operations in 1962 and operates out of Fort Wayne, Indiana. Pyromation is a manufacturer of RTD temperature sensors, thermocouples, and thermowells. Pyromation serves the aerospace, aggregate, chemical, energy and power, food and beverage, heat treating, HVAC, incineration, medical, metal processing, mining, oil and gas, pharmaceutical, plastics, rubber, and waste/water industries. Pyromation’s product lines include thermocouples, RTDs, thermowells, transmitters, connection heads, wire, and accessories. Pyromation also offers application assistance, calibration, training, and custom design services.

    • Suncor Stainless, Inc.
      • United States of America Address: 70 Armstrong Road, Plymouth, Massachusetts, United States of America

      Manufacturer Overview

      Suncor Stainless, Inc. is based in Plymouth, Massachusetts. Suncor Stainless serves the industrial, marine, architectural, commercial, government, and OEM markets as a manufacturer of stainless steel hardware and components. Suncor Stainless is ISO 9001:2015 certified. Suncor Stainless’s services include custom stainless steel manufacturing, product testing and quality assurance, strength testing, metal content testing, custom webbing, custom stainless steal chain assemblies, custom threading, machine swaging, corrosion resistance testing, and retail packaging. Suncor Stainless also supplies numerous components such as sheaves, hooks, and clips. 

    • Selco Manufacturing Corp.
      • United States of America Address: 3 Fairfield Crescent, West Caldwell, New Jersey, United States of America

      Manufacturer Overview

      Selco Manufacturing Corp. was founded in 1907 and is a custom niche manufacturer of products used to build and maintain vital infrastructure. The company is based in West Caldwell, New Jersey. This company provides services such as custom fabrication, DC power distribution, electrified transit, electrical enclosures, cable trays and fittings, and steel security bollards. Their projects encompass a wide range of infrastructure areas, including bridges and roads, rail transit facilities, 3D rail tracks, industrial and utilities, flood protection, as well as cast iron and cast aluminum junction boxes.

    • Pepperl+Fuchs Inc.
      • United States of America Address: 1600 Enterprise Parkway, Twinsburg, Ohio, United States of America

      Manufacturer Overview

      Pepperl+Fuchs, Inc. was founded in Mannheim, Germany in 1945 developing the forerunner of the proximity switch. Pepperl+Fuchs continues to develop proximity sensors as well as other industrial sensors including ultrasonic sensors, rotary encoders, positioning systems, display and signal processing, vibration monitoring, industrial communication, and signal processing as well as related accessories and software. Explosive protection products include safety barriers, surge protection, wireless solutions, HMI systems, power supplies, electrical explosion protection equipment, level measurement, and related software.

    • AmeriStar Mfg.
      • United States of America Address: 2600 9th Avenue, Mankato, Minnesota, United States of America

      Manufacturer Overview

      AmeriStar Manufacturing, Inc. was established in 1908 and headquartered in Mankato, Minnesota. The company is an ISO 9001:2015 certified full-service metal manufacturing company capable of on-site tool making. The company’s services include metal stamping, CNC machining, sheet metal fabrication, electro-mechanical assembly, and engineering & tool building. The company provides support for SMI, VMI, and Kanban programs to support customers’ inventory management as well as other contract manufacturing services including warehousing and shipping.

    • ABC Sheet Metal
      • United States of America Address: 2871 E. La Cresta Ave., Anaheim, California, United States of America

      Manufacturer Overview

      ABC Sheet Metal traces its roots to 1870 and is headquartered in Anaheim, California. The company provides cutting and shaping services to several industries including aerospace, defense, medical, packaging, and construction. The company is AS9100 and ISO 9001 certified, assuring aerospace, defense, and other industry customers of build quality. The company’s cutting and shaping services include laser and water jet cutting, forming & rolling, welding, and CNC machining and punching. The company takes full advantage of 2D and 3D CAD for sheet metal engineering to reduce manufacturing labor and material expenses.

    • G & M Manufacturing Corp.
      • United States of America Address: 111 S. Main St., Crystal Lake, Illinois, United States of America

      Manufacturer Overview

      G & M Manufacturing Corp. is a manufacturer of precision metal stamping that is headquartered in Crystal Lake, Chicago, Illinois, and was established in 1967. The company offers a wide range of precision metal stampings, including sheet metal stampings, deep-drawn stampings, and coining. G & M Manufacturing also offers finishing services, such as degreasing, tumbling deburring, reel-to-reel packaging as well as outside processes such as plating (stripe, spot, and barrel) in various common types, such as gold, silver, palladium, and nickel The company's products find applications in numerous industries such as automotive, electronics, electrical, medical, industrial and consumer products.

    • American Wire Group
      • United States of America Address: 2980 NE 207th Street, Suite PH, Miami, Florida, United States of America

      Manufacturer Overview

      America Wire Group (AWG) is a manufacturer and supplier of wires, cables, and related accessories in the utility and renewable energy market. AWG provides high-quality products for various applications, including wind, solar, and electric vehicle infrastructure. Headquartered in Miami, Florida, AWG has been expanding rapidly and has three other regional distribution centres in California, Pennsylvania, and Texas. In addition to distribution and storage services, offer customer support services like cable management. With a focus on innovation and quality, AWG remains a trusted partner for businesses looking for reliable wire solutions.

    • Estes Design & Manufacturing, Inc.

      • Estes Design & Manufacturing, Inc.
        Brackets

      • United States of America Address: 470 S. Mitthoeffer Rd., Indianapolis, Indiana, United States of America

      Manufacturer Overview

      Estes Design & Manufacturing, Inc., since 1976, is a metal fabricator specializing in Carbon steel sheet metal, Stainless steel sheet metal, and Aluminum sheet metal fabrication to be a manufacturer of products used in medical equipment, appliance, manufacturing, HVAC, office furniture, and aerospace. The company in Mitthoeffer Rd., Indianapolis, IN, offers services, including traditional metal fabrication, 3D laser welding, inventory management, and product development & prototyping established companies are looking for a partner to manage new or revised product designs and development. The company is ISO 9001 and ISO 13485 certified.

    • American Power Systems, Inc.

      • American Power Systems, Inc.
        Brackets

      • United States of America Address: 426 W. 2ND STREET, DAVENPORT, Iowa, United States of America

      Manufacturer Overview

      American Power Systems, Inc. (APS) is an American manufacturer of power conversion and distribution equipment established in 2006 and based in Davenport, Iowa. The company primarily produces mobile power system components including power generators, converters, alternators, and regulators. These are used for integration in marine, security, armored, and specialty vehicles. APS also offers related accessories such as lithium ion battery storage components and switches that increase the RPM range of idling engines. The company provides additional services to customers with niche use cases — including custom product and system design, testing, and integration.

    • Johnson Bros. Roll Forming Co.

      • Johnson Bros. Roll Forming Co.
        Brackets

      • United States of America Address: 5744 McDermott Drive - Berkeley, Illinois, United States of America

      Manufacturer Overview

      Johnson Bros. Metal Forming Company was founded in 1947 in Chicago, Illinois as a manufacturer of roll-forming machines. Today the company is based in Berkeley, Illinois, and has a much-expanded product line serving industries such as agriculture, communications, glass, sports products, and woodworking. The company’s roll-forming capabilities include compatibility with materials such as brass, aluminum, titanium, and other metals. The company is capable of manufacturing products as varied as framing, hats, wireways, tubing, and cable trays.

    • OneMonroe (Monroe Engineering Products)

      • OneMonroe (Monroe Engineering Products)
        FLOOR BRACKET

      • United States of America Address: 2990 Technology Dr Rochester Hills, Michigan, United States of America

      Company Overview

      OneMonroe was founded in the 1920s and is located in Rochester Hills, Michigan. OneMonroe is an ISO 9001:2015 and AS9100D certified global industrial manufacturing company serving several types of customers including manufacturers, distributors and catalog-houses across several vertical markets including aerospace/defense, automotive, medical, and transportation. Product lines include adjustable handles, bearings, casters, gaskets, hydraulic clamping, military spec hinges, molded rubber, piano hinges, pins, pull handles, quick release pins, seals, springs, toggle clamps, and various harnesses. Custom manufacturing is also available to meet specific customer needs.

    • Onexia, Inc.
      • United States of America Address: 750 Springdale Drive, Exton, Pennsylvania, United States of America

      Company Overview

      ONExia Inc is based in Exton, Pennsylvania and is a robotics integrator, custom machine builder, and industrial distributor. ONExia specializing in manual process automation and assists manufacturers of all sizes increase throughput with cutting edge technology. ONExia works with customers to develop turnkey custom machines including 2D & 3D vision system integration, software design & development, and machine safety services. ONExia uses robotics to automate line packaging. ONExia also offers robot palletizers that are compatible with new or existing packaging lines.

    • GTek Automation

      • GTek Automation
        Brackets

      • United States of America Address: 26212 Dimension Drive, Suite 150, Lake Forest, California, United States of America

      Company Overview

      GTek Automation was founded in 1997 as Pacific Engineering and is headquartered in Lake Forest, California. GTek Automation is a technology-based distributor of pneumatic components, leak test and measurements systems. In addition to product distribution, GTek Automation offers product assembly and kitting services to assist our customers reduce the overall cost of component and system acquisition. GTek Automation specializes in the complete integration of the pressure or vacuum source, and all of the auxiliary pneumatic components.

    • A&S Electric Supply, Inc.

      • A&S Electric Supply, Inc.
        Brackets

      • United States of America Address: 5 Coordinator Drive, Erlanger, Kentucky, United States of America

      Company Overview

      A&S Electric Supply, Inc. was founded in April of 1969 in Erlanger, Kentucky. The company is a fully stocked electric wholesale distributor with a residential lighting showroom. The company primarily serves the tri-state area of Cincinnati, Ohio, Kentucky, and Indiana, while providing delivery to anywhere in the United States. The company’s manufacturers include 3M, Bryant, Hubbell, Siemens, and others. The company’s product lines include lamps and lighting supplies as well as electrical components, electric hardware, and tools for installation and measuring.

    • Ohio Power Tool

      • Ohio Power Tool
        Brackets

      • United States of America Address: 999 Goodale Blvd Columbus, Ohio, United States of America

      Company Overview

      Ohio Power Tool, Inc was founded in Columbus, OH in 1983. OPT has 3 primary operating segments: sales, rental, and repair. Sales and rental segments include air compressors and other air tools, concrete & masonry saws, concrete core drills, cordless and electric corded tools, gas detection, generators, hand tools, hydraulic cylinders and pumps, inspection equipment, jobsite cleanup equipment, ladders and lifting equipment, levels, pipe cutting & threading equipment, as well as safety and storage equipment. The repair segment includes testing and recalibration and uses factory parts.

    • Ergonomic Partners

      • Ergonomic Partners
        Brackets

      • United States of America Address: 4000 Fee Fee Rd., Bridgeton, Missouri, United States of America

      Company Overview

      Ergonomic Partners is a branch of Tri-State Overhead Crane, located in St. Louis, Missouri. Ergonomic Partners has a 50-year history as a turnkey solution manufacturer for material handling applications. Ergonomic Partners provides customer solutions for repetitive lifting application, precise product placement, and awkward load handling. Additionally, Ergonomic Partners provides off-the-shelf ergonomic material handling and workstation equipment with custom designed and engineered handling devices and special equipment solutions. Custom lifting devices include ergonomic lift assists, easy arms, manipulator arms, vacuum lifters, tool balancers and more

    • Measurement Technologies & Supply

      • Measurement Technologies & Supply
        Brackets

      • United States of America Address: 23060 Industrial Drive E, St. Clair Shores, Michigan, United States of America

      Company Overview

      Measurement Technologies, established in 2009, is a distributor of precision measurement tools such as metrology displays, Anilam & Acu-Rite CNC controls, linear feedback scales, digital readouts & displays, and digital probes used in automotive and manufacturing industries. The company in St.Clair Shores, MI, has manufacturer partners such as Heidenhain, Magnascale Sony, Metro, Fagor, and Solarton offer warranties of the tools as per the manufacturing company. The company is certified to fix Heidenhain encoders, linear scales, and length gages.

    • Elite Restaurant Equipment

      • Elite Restaurant Equipment
        Brackets

      • United States of America Address: 301‐309 Mount Pleasant Ave. Newark, New Jersey, United States of America

      Company Overview

      Elite Restaurant Equipment was founded in 2013 and headquartered in Newark, New Jersey. Elite Restaurant Equipment is a distributor of restaurant equipment and supplies. Refrigeration equipment includes reach in refrigerators, refrigerated prep tables, refrigerated display cases, merchandising refrigerators, and undercounter refrigerators. Commercial work tables include stainless steel work tables, butcher block work tables, and equipment stands. Commercial sinks include 1-3 compartment sinks, underbar sinks, and faucets. Some additional offerings include various shelves and shelving, exhaust hoods, fryers and ranges, steam tables, chairs, booths, and other restaurant furniture.

    • AIR802
      • United States of America Address: Suite 140, 2570 Beverly Drive, Aurora, Illinois, United States of America

      Company Overview

      AIR802 was founded in 1998 and is headquartered in Oswego. The company is a manufacturer of professional, high-end wireless and cable products sold directly or through distributors and resellers to customers across North and South America, the UK, and Australia, primarily to computer networking and reseller organizations, telephone companies, cable TV, and military customers. The company's primary products are antennas, cables, coaxial, and modular RJ45 connectors. The company also sells tools for hardware management including stripping, crimping, and cutting tools.

    • Witels Albert USA, Ltd.

      • Witels Albert USA, Ltd.
        Brackets

      • United States of America Address: 27 NE Industrial Road, Branford, Connecticut, United States of America

      Company Overview

      Witels Albert USA, Ltd. (WAUS) is an American distributor of tube and wire processing equipment that was established in 1995 as a subsidiary of German company Witels Albert GmbH. Based in Branford, Connecticut, the company offers preform heads for wire or profile shapes, wire straightening guides, and flatwire or strip straightening rolls, as well as wire and tube straighteners and feeders. It also offers cabling accessories (e.g. strippers, cutters) and spare parts for portfolio products. WAUS primarily serves clients in the construction, automotive, and electrical industries.

    • Airdistributor Co.

      • Airdistributor Co.
        Brackets

      • United States of America Address: Southlake, Texas, United States of America

      Company Overview

      Airdistributor Company is headquartered in Southlake, Texas. The company is a Midwest manufacturer’s representative and wholesale distributor offering wholesale-priced exhaust, ventilation, and cooling equipment direct from manufacturers. The company’s suppliers include Air-Row Fans, Northwest Evirofan, Pinnacle Climate Technologies, and Canarm Ltd. The company’s product departments include products designed for industrial, commercial, agricultural, and residential needs, often used for Bitcoin mining, greenhouses, loading docks, and machine shops. Product segments include drum blowers, air curtains, ceiling fans, and exhaust & supply fans.

    • Addison Building Materials

      • Addison Building Materials
        Brackets

      • United States of America Address: 3201 S. Busse Road, Arlington Heights, Illinois, United States of America

      Company Overview

      Addison Building Materials was founded in 1947in Arlington Heights, Illinois. Addison has over 38,000 items in stock across departments including lumber, building materials, hand tools, power tools, electrical, fastener, paper products, SOG Knives, janitorial, clothing, ice & snow, automotive, and audio-visual departments. In addition, Addison offers various services including custom orders, local delivery, rental program for contractor and industrial tools and equipment, lumber cutting, pipe threading, and paint color matching.

    • Plastixs, LLC
      • United States of America Address: 151 Memorial Drive, Unit H, Shrewsbury, Massachusetts, United States of America

      Company Overview

      Plastixs, LLC was founded in 1999 and operates out of Shrewsbury, Massachusetts. Plastixs is a distributor for industrial, plastics processors, process companies, and equipment manufacturers as well as a producer of custom water manifold assemblies and accessories to equipment such as plastic processors, semiconductor equipment, x-ray machines computer servers. Plastixs’s offerings include AIRTECT plastic leak alarm aystem, ATI quick-change robotic automatic tool changers, Bunting magnets, Crizaf conveyors, and Moditec low speed granulators among many more.

    • Stephens Mfg. Co., Inc.

      • Stephens Mfg. Co., Inc.
        Brackets

      • United States of America Address: 711 W 4th St., Tompkinsville, Kentucky, United States of America

      Company Overview

      Stephens Manufacturing was started in 1957 in Tompkinsville, Kentucky. Stephens is a manufacturer and distributor of concrete-related equipment. Categories include ready mix plants, precast plants, central mix plants, RCC, environmental, and material handling. Ready mix batch plants that generally have quicker installation. Precast plants are custom built. Portable mixers mix RCC and other mixes. Environmental components include dust collectors, reclaimers, and wash down racks. Material handling includes batchers, bins, hoppers, silos, conveyors, and vertical pigs. Stephens offers assistance in customer problem solving and delivers to customers globally.

    • Associated Fastening Products, Inc.

      • Associated Fastening Products, Inc.
        Brackets

      • United States of America Address: 700 Hilltop Drive, Itasca, Illinois, United States of America

      Company Overview

      Associated Fastening Products, Inc. (AFP) was established in the early 1990s in Itasca, Illinois. AFP is a manufacturer and distributor of both standard and special fasteners for all uses, with many customers in the agriculture and gun manufacturing industries. Some of AFP’s product and service offerings include automatic screw machining, CNC services, brass fittings, standard fasteners, CNC machining, laser and waterjet cutting services, custom cold headed fasteners, metal stamping services, standard and special washers, cable ties, hardware kits and bagging, Swiss screw machining, inventory management, large diameter bolts, security fasteners, and wire form products.

    • Newport Corporation
      • United States of America Address: 1791 Deere Avenue, Irvine, California, United States of America

      Company Overview

      Newport is a division of MKS Instruments, Inc. that was incorporated in 1961 and headquartered in Andover, Massachusetts. The company is a manufacturing company that serves the specialty industrial, advanced electronics, and semiconductor industries. The company markets its products through Spectra-Physics, MKS Instruments, Richardson Grating, and other brands. Their product categories include motion, optomechanics, optics, and vacuum instruments. Product categories include lasers, MKS vacuum & gas solutions, laser diode controls, and tables & isolation systems.

    • Pollak
      • United States of America Address: 37-18 Northern Blvd, Long Island City, New York, United States of America

      Company Overview

      Pollak Corporation was established in 1909 as a tool and die shop in Boston, Massachusetts. In 2019, Pollak Joined Standard Motor Products and expanded its product offerings. Today, Pollak provides custom design, test, and manufacturing for automotive, agricultural, construction, and marine-related industries. In the company’s ISO 9001/QS9000 certified facilities, the company advances customer requests from the concept stage through testing, initial production, and all the way to volume production. The company’s existing customers include Ford, General Motors, PACCAR, John Deere, and Caterpillar.

    • Transmotec
      • United States of America Address: 1500 District Ave., Burlington, Massachusetts, United States of America

      Distributor Overview

      Transmotec was established in 1995 and based in Täby, Sweden, as a supplier of DC motors and actuators. Its product portfolio includes rotational motion, such as AC gear, brushless DC, and stepping motors. It also supplies linear motion, including linear actuators, solenoids, and power supplies. The supplied products comply with RoHs quality and environmental standards. It caters to healthcare, scientific research, banking & cash management, agriculture, and renewable energy sectors across Europe. The company is CE certified and also operates under ISO 9001 and ISO/TS1694 quality guidelines.

    • Robinson Steel Company
      • United States of America Address: 220 Ford Street, Norristown, Pennsylvania, United States of America

      Distributor Overview

      Robinson Steel Co., established 1921, and located in Norristown, Pennsylvania, is a distributor of facility furnishings. Their product range, includes lockers, shelving, storage, and restroom supplies in which caters to industries such as education, commercial, industrial, and government, providing functional and aesthetic solutions for storage, organization, and restroom amenities. Robinson Steel Co. ensures products to enhance the efficiency, organization, and comfort of different facilities, contributing to a well-organized and user-friendly environment.

    • Ohio Pipe, Valve & Fittings, Inc.

      • Ohio Pipe, Valve & Fittings, Inc.
        Brackets

      • United States of America Address: 3900 Trent Avenue Cleveland, Ohio, United States of America

      Distributor Overview

      Ohio Pipe, Valves, & Fittings, Inc. was founded in 1929 as Ohio Pipe Bending & Coiling Company. Also known as the Ohio Pipe companies, they specialize in fully welded, seamless, stainless steel, and PVC pipes of many sizes. Ohio Pipe companies also sell flanges, couplings, ball, butterfly, gate, control, and relief valves, with thousands of unique items in stock. Ohio Pipe companies’ past and current customers include power plants, steel mills, oil and gas companies, chemical plants, water and wastewater facilities, as well as many OEMs.

    • Westerfield Sales and Service

      • Westerfield Sales and Service
        Brackets

      • United States of America Address: 4284 Pearl Road Clevelan, Ohio, United States of America

      Distributor Overview

      Westerfield Sales and Services (Westerfield) was founded in 1946 in Old Brooklyn, Ohio. Westerfield is stocking caster distributer. Westerfield’s online store offers casters of a number of materials and styles including iron, hard rubber, phelonic, pneumatic, carefree, rubber, polyurethane, TPR, ductile steel, and poly on poly Westerfield also stocks other equipment such as E-tracks, straps, dollies, rubber bands, E-track load bars, furniture dolly carpet ends, hoop kits, tie offs, load bars, panel carts, platform trucks, pry bars, and shelf carts.

    • Governors America Corp. (GAC)

      • Governors America Corp. (GAC)
        Brackets

      • United States of America Address: 720 Silver Street, Agawam, Massachusetts, United States of America

      Distributor Overview

      Governors America Corp, also known as GAC, was founded in 1986 and based in Agawam, Massachusetts. GAC is a vertically integrated global distributor of engine control products. GAC serves industries including power generation, mining, transportation, heavy equipment, and marine industries and is AS9100:D and ISO 9001:2015 certified. GAC products are in categories such as actuators, speed controllers, gaseous fuel and ignition management systems, generators, and accessories. GAC’s product design capabilities include software design, electronic component design, as well as mechanical design.

    • M & M Rogness Equipment Co.

      • M & M Rogness Equipment Co.
        Brackets

      • United States of America Address: 1941 W. County Road C-2 Roseville, Minnesota, United States of America

      Distributor Overview

      M & M Rogness Equipment Company was founded in 1947 and headquartered in Roseville, Minnesota. M & M Rogness is an industry provider in the distribution, sales, and service of hydraulic and pneumatic products. M & M Rogness’s product line includes hundreds of parts including both components and full machines. Components include valves, cylinders, couplings, baskets, and other accessories. Additionally, machines such as filtration devices, power units, pumps, and motors are also available. M & M Rogness distributes both domestically and overseas and offers custom order accommodation for items not found in their catalog.

    • Buyer's Point, LLC
      • United States of America Address: 2300 Tall Pines Drive Suite 110, Largo, Florida, United States of America

      Distributor Overview

      Buyer's Point, LLC is a company established in 2010 and based in Florida, United States, as a supplier of electrical components. Its catalog includes a wide assortment of products, such as HDMI cables, wall receptacles, mounting brackets, patch panels, and power strip cables. It also supplies wall plates, including ethernet, brush, combo, recessed, and HDMI wall plates. The company acquired the ISO 9001:2008 certification and has partnered with Walmart, eBay, and Amazon. Its products serve the residential, commercial, schools, hotel, and recreational vehicles sectors across the USA.

    • Reasontek Corp.
      • United States of America Address: 565 W. Lambert Rd. #D, Brea, California, United States of America

      Distributor Overview

      Reasontek Corporation was founded in 2009 and is headquartered in Brea, California. The company is a distributor of products that primarily serves the technology and domestic and global oilfield equipment and industrial supplies industries. The company has two primary business segments: accumulator production and oilfield equipment and industrial supplies. The accumulator production segment includes accumulators and other energy storage and surge protection devices as well as CAD services. The oilfield equipment and industrial supplies segment includes bladder accumulators, repair kits, and related accessories.

    • N.T. Ruddock Co.
      • United States of America Address: 26123 Broadway Ave. Cleveland, Ohio, United States of America

      Distributor Overview

      N.T. Ruddock Company was founded in 1951 and is located in Cleveland, Ohio. N. T. Ruddock is ISO 9001:2015 registered and is a distributor off industrial equipment. Product lines include blast cleaning abrasives, equipment and replacement parts, primary and secondary aluminum ingot, aluminum and copper master alloys, and pure metals. Abrasive options include glass beads, corn cob, crushed glass, steel shot, copper slag, and more. Metal options include aluminum alloys, aluminum master alloys, copper master alloys, ferro alloys, alloy additions, and beryllium alloys. Additionally, N.T. Ruddock also sells many types of parts such as nozzles, guns, and valves, in addition to larger equipment such as blast cabinets and blast pots. NT. Ruddock offers installation, cleaning, repair, custom bagging, and in-house blending of abrasives, and repair.

    • JC CHERRY INC.
      • United States of America Address: 606 North 1st Street, San Jose, California, United States of America

      Distributor Overview

      JC Cherry, Inc. was founded in 2013 and is headquartered in San Jose, California. The company serves markets including semiconductors, medical, military, industrial, and automobile as a distributor of electronic components including RF connectors and round socket pins produced by JC Electronics Corporation of Tokyo, Japan. The company functions as an importer and exporter of electronic parts and instruments, arts, crafts, and industrial products. The company also manufactures electronics components including PCB connectors, sockets for transistors & diodes, and test sockets for IC devices.

    • Airmatic Inc.
      • United States of America Address: 284 Three Tun Road, Malvern, Pennsylvania, United States of America

      Distributor Overview

      AIRMATIC was founded in Philadelphia in 1944. AIRMATIC serves a many industries including cement and concrete, oil, gas, energy, biomass, chemical products, feed & grain, food manufacturing, glass & ceramics, and clay. For these industries, AIRMATIC provides installation, maintenance, fabrication, silo cleaning, inspection, and repair, as well as repair and rebuilding of power tools. AIRMATIC also has an extensive lineup of products for sale including air cannons, automatic lubrication systems, belt conveyor components, flow detectors, finishing equipment, safety equipment, industrial vibrators, railcar openers and unloading equipment, rebar tools, valves and actuators, and mechanical force exciters.

    • Diamond Needle Corp.
      • United States of America Address: 60 Commerce Road - Carlstadt, New Jersey, United States of America

      Distributor Overview

      Diamond Needle Corp is the North American distributor for Organ Needle Co., LTD of Japan. Diamond Needle Corp is a supplier of sewing supplies and materials. Individuals and industries served include apparel, automotive, bag closing, bookbinding, embroidery, filters, furniture, home fashions, industrial textiles, mattresses, non-woven, quilting, and other special applications. Diamond Needle has over 100,000 parts and supplies available including needles, replacement parts, scissors, lubricants, chemicals for cleaning and adhesive use, specialized tools, drive belts, crayons, markers, safety aids such as gloves and needle protection, and electric busways.

    • Officine Meccaniche Industriali Srl

      • Officine Meccaniche Industriali Srl
        Brackets

      • Italy Address: Via dell'Artigianato, 34 - Fogliano Redipuglia Gorizia, Italy

      Manufacturer Overview

      Officine Meccaniche Industriali Srl (OMI) is based in Fogliano Redipuglia, Italy, and is a manufacturer of compressed air and industrial refrigeration products that was established in 1990 before its acquisition by Ingersoll Rand PLC in 2007. The company's portfolio comprises various products for compressed air treatment, liquid refrigeration, piping solutions, and related accessories. These include water or oil chillers, aftercoolers, butterfly valves, condensate separators, and refrigerator air dryers. The company's products are mainly used in the food and beverage, plastics, pharmaceuticals, and textile industries.

    • Indelec Group
      • France Address: 61, chemin des postes Douai, France

      Manufacturer Overview

      Indelec Group, founded in 1955, is a manufacturer headquartered in Douai, France, producing lightning protection systems (LPSs). The company offers lightning risk management solutions, certified by third-party auditors, such as Bureau Veritas for the ISO 9001 and French standards for protection against lightning, NFC 17-102:2011. These products include early streamer emission air (ESE) terminals and modular lightning rods, supported by ProtecRisk2.0, an online software for LPS technical surveys and lightning risk assessment. In partnership with Lightning Innovation and Research Institute (LiRi), the company conducts research campaigns in high-voltage laboratories and real lightning test campaigns in the United States, Japan, and Indonesia.

    • Mader GmbH & Co. KG
      • Germany Address: Brühlhofstr. 5, Leinfelden-Echterdingen, Germany

      Manufacturer Overview

      Mader GmbH & Co. KG, based in Leinfelden-Echterdingen, Germany, is a manufacturer specializing in coatings. Its product range encompasses industrial coatings, composites, resins, connection technology, and pneumatic cylinders, applied across various industries for protective coatings, material enhancement, and industrial processes. The company holds the prestigious EN 9100 certification, particularly vital in the aerospace sector, indicating a adherence to quality. The company also actively participate in environmental protection initiatives, including the Mäder Clean Walks, demonstrating its adherence to sustainability.

    • Seaward Electronic Ltd.
      • United Kingdom Address: 15-18 Bracken Hill, South West Industrial Estate, Peterlee, Co. Durham, United Kingdom

      Manufacturer Overview

      Seaward Electronic Ltd, since 1982 is a manufacturer of electrical safety test equipment and software headquartered in Peterlee, United Kingdom, with an additional office in Tampa, Florida. The company’s product portfolio includes portable appliances, solar PV, manufacturing, medical device, and high-voltage testers. They offer various medical equipment testers such as electrical safety analyzers, patient simulators, defibrillator analyzers, and electrosurgical analyzers. They offer various electrical testers for testing resistance such as milliohmmeters, microhmmeters, and decade resistance boxes, and high voltage such as phasing sticks, voltage indicators, and safe discharge rods.

      • United Kingdom Address: Unit 4, Grosvenor Business Centre Vale Park, Evesham, WR11 1GS, United Kingdom

      Manufacturer Overview

      Barnes Group Inc. is an ISO 9001-certified manufacturer of industrial engineering products established in Bristol, Connecticut, USA, in 1957. The company’s products include industrial molds for compression molding or plastic injection processes, and custom engineered components for the transportation industry such as springs and stampings. It also offers specialized motion control products such as nitrogen gas springs and shock absorbers. The company chiefly serves clients in the aerospace, military, and transportation sectors.

    • SATO VAC INC.
      • Japan Address: 5-1-27, Oi, Shinagawa-ku, Tokyo, Japan

      Manufacturer Overview

      SATO VAC INC., established in 1932 and based in Tokyo, Japan, is a manufacturer of vacuum equipment including vacuum pumps, measuring instruments, and parts & components. Its production line is segmented into vacuum pumps, gauges, and equipment used in space development, semiconductors, energy, medical, optics, and automobile industries. The company's vacuum equipment includes compact CVD systems, vacuum defoamers, heat treatment furnaces, dryers, and evaporation systems. The company's production process involves structural designing, prototype creation, design review, and performance testing.

    • Fuji Koatsu Flexible Hose Co., Ltd.
      • Japan Address: 6-2-20, Shimata, Hikari-sh, Yamaguchi, Japan

      Manufacturer Overview

      Fuji Koatsu Flexible Hose Co., Ltd. established in 1947 in Hikari City, Yamaguchi Prefecture, is a manufacturer and supplier of hydraulic piping parts. The company's product range includes flexible hoses, joints, bending pipes, Meiji Flex Composite Hoses, and oil cleaners. These products are essential for fluid transfer in applications ranging from industrial construction machinery to factories. They serve industries such as manufacturing, construction, and marine. Beyond producing these items, the company offers custom product design, testing for quality assurance, pressure resistance inspection, and customer support services.

    • Nihon Pisco Co., Ltd.
      • Japan Address: 3-9-32 Osachiizuhaya, Okaya, Nagano, Japan

      Manufacturer Overview

      Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.

    • KDM
      • China Address: #9, Xinyuan Road, Huishan District, Wuxi, Jiangsu, China

      Manufacturer Overview

      KDM is a Chinese manufacturer and supplier of steel enclosures that was established in 2006 in Wuxi, Jiangsu. The company produces various outdoor and indoor enclosures, including control panel, telecom, and battery configuration models. It also offers merchandise displays, point-of-purchase and point-of-sale (POP/POS) materials, and retail fixtures such as racks and shelves. KDM products are mainly used by clients in the industrial and retail sectors, as well as in the telecommunication and energy industries.

    • Ogena Solutions
      • Canada Address: 442 Millen Road, Unit #6 Stoney Creek, Ontario, Canada

      Manufacturer Overview

      Ogena Solutions is a Canadian manufacturer of cleaners and disinfectants for animal biosecurity applications. The company is based in Stoney Creek, Ontario, and was originally established as Anivac Corporation in 2005 before its rebrand in 2010. The company produces cleaning and disinfecting products including foamers, mixing stations, air purifiers, sprayers, and mixing stations. These are used for the care and protection of animals in various facilities, such as boarding or daycare businesses, shelters, veterinary clinics, and farms. Ogena Solutions chiefly serves clients in agriculture and not-for-profit animal protection organizations, including the Toronto Humane Society, Ontario SPCA and Hamilton Animal Services.

    • Bosch Rexroth

      Manufacturer Overview

      Bosch Rexroth’s origins date back to 1795 and is now based in Lohr am Main, Germany. Bosh Rexroth is a manufacturer of industrial and mobile equipment control and motion products and systems. Bosch Rexroth’s products are divided into 10 technology segments. First is assembly technology which includes modular components. Next are electronic drives and controls which include CNC and motion control. Industrial hydraulics and linear motion technology follow. Mobile hydraulics, electronics, and IoT include solutions for mobile machines. Gear technology includes planetary gearboxes. The final four segments are molding and casting technology, tightening technology, resistance welding, and mobile robotics.

    • Hilti North America

      Manufacturer Overview

      The Hilti company, founded in 1941, is a manufacturer of drilling and mounting technologies, anchor systems, and functioning products with its global business headquarter in Schaan in the Principality of Liechtenstein. The company aims to increase its customers productivity and profitability by reinvesting further resources in research and development. Hilti North America team includes approximately 4,000 trained team members in product and software development, engineering, logistics and other support roles. They launched a new cordless platform called Nuron that radically simplifies work on construction sites, enhances tool park management, drives performance to much higher levels and improves operator health protection.

    • Right On Industries LLC

      Manufacturer Overview

      Right On Industries LLC is a company established in 2018 and based in Portland, Oregon, as a manufacturer of brackets. It specializes in manufacturing shelf brackets, countertop brackets, floating shelf brackets, and wood shelving. Its products are made of granite, quartz, marble, or wood and are equipped with a powder coat to prevent rust or corrosion. Its products are utilized for builders and contractors sectors across the USA. The company has a program named The Builder+ program made for businesses and contractors that need to purchase its products for projects on a regular basis.

    • Valley Design Enterprises, Inc.

      • Valley Design Enterprises, Inc.
        Brackets

      Manufacturer Overview

      Valley Design Enterprises, Inc. (VDE) is an American manufacturer of table base components established in 1987 and based in Fountain, Minnesota. The company produces various table base functionality products such as flipping and folding mechanisms, components for wire management, and components with adjustable or fixed heights for client manufacturers of furniture. VDE products are available in a wide selection of finishes, including solid matte or glossy colors and textured metallics. The company chiefly serves clients in agriculture, construction, and transportation.

    • Vaccon Co., Inc.

      Manufacturer Overview

      Vaccon Co., Inc., now NORGREN, has roots dating back to 1947, was originally founded in 1972, and headquartered in Saline, Michigan. NORGREN is a manufacturer with expertise in die and automation design. NORGREN product lines include adaptive transforming tools, double blank analyzers, grippers & shovels, mounting solutions, carbon fiber structures, thread, stud, & nut detection, tool changers, vacuums, and modular tooling in industrial automation & cabots. NORGREN services include automation and tooling, die engineering, carbon fiber, and vacuum services as well as expertise to assist customers adapt old equipment for new applications or in new plants.

    • Denier James Co.

      Manufacturer Overview

      Denier James Co. established in Cincinnati, Ohio, in 1936 is a manufacturer of aluminum alloy structural pipe fittings for hand rails and guard rails. Their product range includes Rigid Or Fixed Angle Slip-On Fittings, Adjustable Slip-On Pipe Fittings, Offset Slip-On Fittings, Mounting Flanges, and Structural Fitting Solutions. Their products are used in used for the construction of guardrails, handrails, shelving, racks, and enclosures. The company has a global distribution network, and provides customer service.

    • HoldRite, a brand of Reliance Worldwide Corporation

      • HoldRite, a brand of Reliance Worldwide Corporation
        Brackets

      Manufacturer Overview

      HoldRite is an American manufacturer of plumbing and mechanical products originally established in 1982 before its acquisition by Reliance Worldwide Corporation (RWC) in 2017. Based in Poway, California, the company offers various pipe supports, firestop system components, no-hub fitting restraints, and outlet boxes that connect faucets and other fixtures. It also offers water heater accessories, such as valves and connectors. HoldRite primarily serves clients in residential, commercial, and industrial construction operations, including Toll Brothers and Marriott Hotels.

    • SensoPart Inc.

      Manufacturer Overview

      SensoPart, Inc. was founded in 1994 and headquartered in Germany with US operations based out of Bingham Farms, Michigan. The ISO 9001:2015 certified manufacturing company serves the automotive, robotics, plastics, solar, and other industries with photoelectric sensors and image processing products. The company’s products include optical sensors, vision sensors, ultrasonic sensors, inductive sensors, and accessories. Together they are used in manufacturing detection & inspection, product identification, a diverse array of measuring tasks, product positioning, and color detection.

    • The Hollaender Mfg. Co.

      Manufacturer Overview

      Hollaender Mfg. Co. was founded in 1930 and officially incorporated in 1946 and is headquartered in Cincinnati, Ohio. The company is a manufacturer of hand railing systems used in rocket launch pads, oil rigs, amusement parks, power generation facilities, and retail stores around the globe. The company utilizes a vertically integrated design, casting, and manufacturing system to manufacture handrail systems to meet any application with slip-on fittings that are cost-effective, easy to install, and reusable.

    • Keystone Electronics Corp.

      • Keystone Electronics Corp.
        Brackets

      Manufacturer Overview

      Keystone Electronics Corp. has a 70 year history and is headquartered in New Hyde Park, New York. Keystone is a global manufacturer of precision electronic components and hardware. Keystone is ISO 9001:2015 certified. Keystone offers several types of products including battery & coin cell holders, contacts, && clips, fuse clips & fuse holders, handles for instrumentation, metal key-pad dome switches, multi-purpose hardware, PC board hardware, plugs, pins, jacks, sockets, quick-fit terminals, screw terminals, terminal blocks, screws, spacers, standoffs, terminals, terminal boards, test points, tips, probes, jumpers, and clips. Keystone also offers custom manufacturing capabilities including stamping, machining, assembly, tool room, and quality assurance.

    • teknim
      • Turkey Address: Dudullu Organize Sanayi Bölgesi 1.Cadde Ismet Tarman Is Merkezi No:1 Kat:2 No:32 Ümraniye Istanbul, Turkey

      Company Overview

      Teknim, established in 2003 and headquartered in Turkey, is a manufacturer and distributor of electronic security systems. The company offers a range of products, including wireless fire alarm systems, fire alarm systems, and intruder alarm systems. These systems are designed for the general purpose of ensuring safety and security by detecting potential fire hazards and unauthorized intrusions. Its mobile application has been developed for customers to control and manage its security systems through its mobile devices based on a cloud platform.

    • Vital Parts
      • United Kingdom Address: Unit 17, Palace Industrial Estate, Bircholt Road, Maidstone, Kent, United Kingdom

      Company Overview

      Vital Parts, established in 1993 and headquartered in Maidstone, Kent, UK, is a manufacturer and supplier of plastic, rubber, and metal components. The company's product range includes a wide range of components such as plugs, furniture, chair feet, and cable management solutions. It serves a diverse array of industries including automotive, aerospace, construction, engineering, and the food and beverage sector. The company’s emphasis extends to offering technical support, on-site training, fast delivery, and custom molding services. It also emphasizes quality and customer satisfaction. The company stands as a dependable supplier in the UK and worldwide.

    • IWATA MFG.CO.,LTD.
      • Japan Address: 923-1 Ikejiri, Seki City, Gifu, Japan

      Company Overview

      Iwata Mfg. Co., Ltd., established in 1966 and headquartered in Gifu, Japan, is a manufacturer of commercial machinery components and power transmission equipment. The company offers a wide range of products, including bearing rollers, end plates, leveling systems, nameplates, and seals. It also provides set collars, shims, sensor brackets, and trims. Its product requires less maintenance than oil-injected air compressors because it doesn't require oil changes or filter replacements. It serves a diverse range of industries, including coating applications, refinishing applications, manufacturing, and vacuum pumps.

    • Wharton Hardware and Supply

      • Wharton Hardware and Supply
        Brackets

      Company Overview

      Wharton Hardware and Supply is a family-operated business that was founded in 1948 in Philadelphia, Pennsylvania and has branched to several locations across the United States. Wharton operates in 3 segments: products, sales & rental, and services. The products segment includes road & bridge concrete accessories, safety equipment, abrasives and cutting tool products, plumbing-related products, topological products, fasteners, bits and drill equipment, as well as power tools. The sales & rental segment offers heavy duty construction equipment from major brands. The services segment includes repair and testing for tools and equipment.

    • Clip Strip Corp.

      • Clip Strip Corp.
        Brackets

      Company Overview

      Clip Strip Corp. (CSC) is an American manufacturer and distributor of point-of-purchase (POP) and display accessories that was established in Hackensack, New Jersey in 1980. The company produces various display and merchandising accessories for maximizing space efficiency and product visibility, such as hook systems, shelf dividers, clip strips, and sign holders. They also offer display construction materials, including power panel clips or hooks, poles, and floor protectors. CSC products are primarily used by retailers and wholesalers, as well as by retail display designers.

    • Caylor Industrial Sales, Inc.

      • Caylor Industrial Sales, Inc.
        Brackets

      Company Overview

      Caylor Indstrial Sales, Inc. was founded in Dalton, Georgia in 1980. Today, Calor serves a number of sectors of the industrial market, in particular engineering, construction, manufacturing, paper mills, and chemical plants. The company is a distributor of many industrial components including valves, fittings, pipe and tube hangers, actuators, and water, steam, and air regulators. The company also offers services as a manufacturer of both low and high-volume production custom parts using a variety of materials including steel, stainless steel, aluminum, brass, Delrin, and Lexan.

    • Tarps Now

      Company Overview

      Tarps Now is a commercial manufacturer and distributor of standard and custom-made tarps and covers founded in 2010. TN is headquartered in Saint Joseph, Michigan, and offers tarps and covers to suit various applications, from fitness centers and baseball fields to warehouses, construction, and even trucks. Tarps Now covers and tarps are made using industrial grade materials like vinyl, ploy, and canvas to cater to various client needs and to ensure they remain flexible regardless of the application.

    • Band-N-Go Inc.
      • Canada Address: 8540 Keele St. Unit # Vaughan L4K 2N2, Ontario, Canada

      Distributor Overview

      BAND-N-GO Inc™, established in 2001, is a reputable Canadian supplier of stainless steel cable ties, banding, tools, and accessories based in Vaughan, ON, Canada. The stainless steel products by BNG are designed to withstand the harshest conditions. Their product range includes various lengths, widths, and styles to cater to diverse industrial needs. The company’s stainless steel cable ties and banding products meet high standards and are listed with and approved by UL, UL RoHS, ABS, and DNV. Their products are distributed across Canada and the USA, reaching Electrical, Industrial/Fastener, and Utility distributors.

    • Hybrid Electronics Corporation

      • Hybrid Electronics Corporation
        Brackets

      Distributor Overview

      Hybrid Electronics is a global distribution specialist of electronic components, with access to over 50 million unique components. Among the markets HE serves are the aerospace, automotive, communications, defense, industrial, medical, national security, and test & measurement industries. In addition to components, HE also provides quality and compliance testing, counterfeit detection, upscreening, and other forms of quality control. Examples of component subtypes that HE offers include ICs, batteries, capacitors, semiconductor products, sensors, circuit protection, interconnectors, filters, optoelectronics, relays, switches, power supplies, and cables and cable assemblies.

    • Cadence Supply Company

      Distributor Overview

      Cadence Supply Company is headquartered in Homewood, Illinois, and is a U.S.-based industrial products distributor offering a wide array of industrial products for MRO and other production requirements ranging from standard off-the-shelf items to custom die-cut parts and materials to both individuals and Fortune 500 companies. The company’s product offerings include fasteners, roller chains, linear motion products, and products made from various materials. In addition to in-house-manufactured items, the company is a distributor for SMC, CS Hyde, New York Wire, and Spyraflo, among others.

    • Broward A & C Medical Supply

      • Broward A & C Medical Supply
        Brackets

      Distributor Overview

      Broward A & C Medical Supply, Inc. is based in Deerfield Beach, Florida, and serves medical-grade liquids and gases to a variety of industries. Broward A & C offers services including medical gas leak detection analysis as well as calibration, leak detection fluids for specific gases, and ultrasonic leak detection systems. Brow A & C offers a selection of Liquids and gases including Oxygen USP, Nitrogen NFF, air USP, helium, ultra high purity helium, CO2, aviators breaking O2, argon, lung diffusion, dental sedation gases, and other specialty gas mixtures.

    • Traffic Safety Warehouse

      Distributor Overview

      Traffic Safety Warehouse is based in Deerfield, Illinois. Draffic Safety Warehouse is a wholesale direct marketer of traffic safety, work zone safety, pedestrian safety, crew safety, crowd control and other products, mostly made in the USA. Traffic Safety Warehouse generally serves other distributors, construction companies, utilities, educational intuitions, and municipal governments. A few examples of products include numerous types of barricades, facility safety devices, lights, parking lot safety, and work zone safety accessories.

    • Solar Biz Inc.

      Distributor Overview

      Solar Biz Inc. began in the 1970s in Ft. Atkinson, Wisconson. Solar Biz offers complete solar panel systems for residential and commercial customers ranging from under 5 watts to over 400 watts. Systems include solar panel components with racking and mounting, inverters, power centers, solar charge controllers, batteries, and accessories, AC and DC enclosures, circuit protection, hydro and wind generators and accessories, water pumps and water filtering, tanks, heaters, hot tubs, rain catchments, and appliances such as fans, gas ranges, refrigerators and freezers.

    • Classic Automation

      Distributor Overview

      Classic Automation based in Webster, New York is a parts distributor and repair servicer for installed controlled systems, drives, and servo motors, as well as a purchaser of well-maintained surplus systems. Parts that Classic Automation distributes and repairs include DcS, PPLC, and CNC control systems, panel controllers, HMI panels, display panels, drives, encoders, resolvers, and power supplies. Classic automation also offers hard drive repair services and support for customizing functionality in Panelicity controllers.

    • ICKey Internet Technology Co., LTD

      • ICKey Internet Technology Co., LTD
        Brackets

      Distributor Overview

      Hello BOM is an online electronic component storefront designed to bridge customers and suppliers. Customers supply Hello BOM with their bill of materials (BOM) and Hello BOM uses smart analysis via AI data matching to quickly find precise matches that customers need. This is accomplished via Hello BOM’s growing component stock and product information database to grow increasingly accurate and fast, while also simplifying the process of R&D and purchasing for customers. Products include semiconductors, resistors, capacitors, diodes, inductors, connectors, transistors, and sensors.

Bracket Manufacturer Ranking

*Including some distributors, etc.

Derivation Method

The ranking is calculated based on the click share within the bracket page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.

Number of Employees

  1. Pepperl+Fuchs Inc.: 7,100
  2. HoldRite, a brand of Reliance Worldwide Corporation: 2,800
  3. Nihon Pisco Co., Ltd.: 520

Newly Established Company

  1. Maedler North America: 2020 (4 years ago)
  2. JC CHERRY INC.: 2013 (11 years ago)
  3. Reasontek Corp.: 2009 (15 years ago)

Company with a History

  1. Baker Stamping Metal Products, The W. J. Baker Company: 1899 (125 years ago)
  2. Pollak: 1909 (115 years ago)
  3. Granat Industries, Inc.: 1922 (102 years ago)

Bracket Manufacturers in United States

*Including some distributors, etc.

Global Distribution of Bracket Manufacturers by Country

*Including some distributors, etc.

Country Number of Companies Share (%)
United States of America United States of America 86 86.0%
Japan Japan 4 4.0%
United Kingdom United Kingdom 3 3.0%
Canada Canada 2 2.0%
Italy Italy 1 1.0%
France France 1 1.0%
Germany Germany 1 1.0%
China China 1 1.0%
Turkey Turkey 1 1.0%

List of Bracket Products

32 products are listed.

Silebear supplied parts Installation bracket resin nylon-Corporation Kokamori Chemistry

Corporation Kokamori Chemistry

Silebear supplied parts Installation bracket resin nylon

120+ people viewing

Last viewed: 23 hours ago

There are other model numbers.


10 models listed

Sile Bearlite KSE-1015 Installation bracket-Corporation Kokamori Chemistry

Corporation Kokamori Chemistry

Sile Bearlite KSE-1015 Installation bracket

30+ people viewing

It is a mounting bracket for Sile Bearlite KSE-1015.


4 models listed

Sile Bearlite KSE-2727 Installation bracket-Corporation Kokamori Chemistry

Corporation Kokamori Chemistry

Sile Bearlite KSE-2727 Installation bracket

80+ people viewing

Last viewed: 22 hours ago

It is a mounting bracket for Sile Bearlite KSE-2727.


4 models listed

Sile Bearlite KSE-2913 Installation bracket-Corporation Kokamori Chemistry

Corporation Kokamori Chemistry

Sile Bearlite KSE-2913 Installation bracket

30+ people viewing

It is a mounting bracket for Sile Bearlite KSE-2913.


4 models listed

Related Products

Stud Bolts
Mount Plates
Titanium Bolts
Plastic Lock Nuts
Shim Tapes
Captive Panel Screws
Metal Fasteners
Small Binding Screws
Plug Anchors
Bushings
R Screws
Panel Nuts
Fine U-Nuts
Expander
Thin Washers
Wave Spring Washers

Search from All Categories

1201 Sensors
1203 Test Equipment
1204 Motors
1205 Pumps
1206 Relays
1207 Testing Equipment
1208 Analyzers
1209 Diodes
1210 Measuring Equipment
1211 Observation Equipment
1212 Printers
1213 Capacitors
1214 Switches
1215 Robots
1216 Cameras
1217 Connectors
1218 Meters & Instruments
1219 Generators
1220 Light Sources
1221 Power Supplies
1222 FA Equipment
1223 Machining / Machine Tools
1224 Boards & Circuit Boards
1225 Transformers
1226 Integrated Circuits
1227 Cables
1228 Transistors
1229 Controllers
1230 Electromagnetic Countermeasures
1231 Surge Countermeasures
1232 Drive Mechanisms & Components
1233 Scanners
1234 Servers
1235 Magnetic Materials
1236 Amplifiers
1237 Semiconductor Manufacturing
1238 Metallic Materials
1239 Terminals / Interfaces
1240 Temperature Control
1241 Fastening Components
1242 Network-related Equipment
1243 Development & Design
1244 Safety Devices
1245 Input & Display Devices
1246 Polymeric Materials
1247 Optical Components
1248 Purification Equipment
1249 Storage Devices
1250 Fixtures
1251 Heat Sources
1252 Sealing Devices
1253 Storage Products
1255 Fittings
1256 Valves
1257 Gloves
1258 Sanitary
1259 Springs
1260 Conveyors
1261 Resistance / Load
1262 Filters
1264 Converters & Transducers
1267 Cleaning Agents & Equipment
1269 Protective Materials & Equipment
1270 Hoses / Tubes
1271 Clean Room Supplies
1273 Clamps & Fasteners
1274 Adhesives & Repair Materials
1278 Analysis Software
1279 Stages
1280 Freezers
1281 Terminals
1283 Nozzles
1284 Cooling Equipment
1285 Bio
1286 Separation and Extraction Equipment
1287 Lubricator-related Equipment
1288 Business Efficiency Systems / Software
1290 Coils
1291 Paints
1292 Inorganic & Mineral Materials
1293 Dryers
1294 Blowers
1295 Agitators
1296 Weighing Equipment
1298 Packing Materials
1299 Processing Services
1300 Testing Services
1301 Tools
1302 Elements
1303 Chemicals
1304 Pesticides
1305 Building Materials
1306 Agricultural Materials
1307 Painting Services
1308 Vehicle related
1309 Construction Machinery
1310 Ship related
1311 Aircraft
1312 Transport Vehicles
1313 Global Environment

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree