12 Gun Nozzle Manufacturers in 2024
This section provides an overview for gun nozzles as well as their applications and principles. Also, please take a look at the list of 12 gun nozzle manufacturers and their company rankings. Here are the top-ranked gun nozzle companies as of December, 2024: 1.INPRO Technologies, Inc., 2.Adam Pumps S.p.A., 3.YAMAGUCHI GIKEN co., ltd..
Table of Contents
What Is a Gun Nozzle?
Gun Nozzles are specific nozzles that are primarily used in connection with a hose.
It has a convenient shape, especially in the form of a pistol, for manually discharging liquid or gas supplied by a hose. The handle is equipped with a trigger, and the liquid or gas can be discharged by pulling this trigger lever.
There are two types: manual and auto-stop. The latter is characterized by a function that detects the liquid level and automatically stops the machine.
Uses of Gun Nozzles
Gun Nozzles can be used by extending a hose from a high-pressure washer or pump and connecting it via a socket. If the emissions are gaseous (e.g., air), an air hose and compressor can be used together.
They are mainly used in situations where liquids or gases are supplied manually, such as when you want to spray water on a field, wash a car with warm water, or dry paint using air.
Both manual and auto-stop types can be fitted with a flow meter, which is utilized when the liquid needs to be separated or the discharge volume needs to be measured.
Principle of Gun Nozzles
There are two types of gun nozzles: manual type and auto-stop type, but the basic construction is much the same for both types.
1. Manual Gun Nozzle
Inside the Gun Nozzle is a channel for liquid or gas to pass through, and a valve closes the channel when the lever is not pulled. When the lever is pulled, a pin is raised in conjunction with the lever, pushing the valve inside the Gun Nozzle upward and opening the channel.
As a result, liquid or gas supplied to the Gun Nozzle can be injected from the tip of the nozzle.
2. Auto-Stop Gun Nozzle
A liquid level detection sensor is built into the auto-stop Gun Nozzle, and a hole is drilled in the tip of the nozzle for detection.
For example, when filling a tank with gasoline, and the tank is not filled, the sensing hole at the tip will not be blocked. Air flows inside the Gun Nozzle, and when the tank is full, the nozzle tip is blocked with gasoline, and air cannot flow inside the Gun Nozzle, creating a vacuum.
The built-in sensor then detects this vacuum and pushes up the valve on the Gun Nozzle, automatically closing the flow channel.
Types of Gun Nozzles
There are many different types of Gun Nozzles. Each is designed for a specific task or environment, and understanding their characteristics will help in selecting the appropriate nozzle.
1. Classification by Material
Gun Nozzles are made of a wide variety of materials, including plastic, aluminum, and stainless steel. Each material has different properties such as durability, light weight, and corrosion resistance.
2. Classification by Shape
Gun Nozzles also come in a wide variety of shapes. It is important to select the most suitable shape for each application, such as straight, angled, narrow-tipped, or capable of spraying over a wide area.
3. Classification by Flow Control Function
Some nozzles can control the flow rate. These nozzles are equipped with a flow control knob that allows delicate control of the amount of liquid or gas discharged.
How to Select a Gun Nozzle
The choice of Gun Nozzle depends largely on the purpose of use and the environment.
1. Purpose of Use
The most important factor in selecting a Gun Nozzle is what it will be used for. Whether for spraying liquid, cleaning, ventilation, or spraying heat, the appropriate nozzle should be selected according to the purpose.
2. Durability
Durability is a major factor in the choice of Gun Nozzle material. If the gun nozzle is to be used frequently or if it is to handle high-pressure or high-temperature liquids or gases, it is necessary to select a material with high durability.
3. Flow Control or Not
For jobs that require flow control, choose Gun Nozzles with flow control. Nozzles with adjustable spray volume and jetting force are effective for more precise work.
4. Ease of Handling
Finally, the ease of handling the Gun Nozzle is an important selection criterion. The shape of the handle, weight, size, and other factors should be chosen to suit your hand.
List of 12 Gun Nozzle Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Germany
- Italy
- Japan
- Spain
- United Kingdom
-
-
-
Fusion Inc.
Guns, Reservoirs, Nozzles & Accessories
Manufacturer Overview
Fusion Inc., founded in 1933 and headquartered in Willoughby, Ohio, is a manufacturer of brazing and soldering automation solutions. The company supplies brazing and soldering paste and powder to various markets across Western, Central, and Eastern Europe, as well as countries in Africa and the Middle East. These products are vital in the manufacturing and fabrication industries, enabling bonding of different materials, creating durable joints across a wide range of applications. The company conducts feasibility testing for new applications, ensuring the quality of its manufacturing solutions.
-
-
-
-
-
INPRO Technologies, Inc.
Guns and Nozzles
Manufacturer Overview
INPRO Technologies was founded in 1987 and is headquartered in Frederick, Maryland. The company is a manufacturer of automation and robotic machinery to market segments including medical devices, automotive, electronics, plastics, and coating of wood and laminate flooring. The company provides process technologies including UV curing and control, web cleaning, plasma treatment, surface cleaning, and electrostatic charging. The company’s services include system integration, consulting, diagnostics, repair, and robotics & automation integration.
-
-
-
-
-
Steinel America Inc.
Heat gun nozzles
Manufacturer Overview
Steinel America Inc. is a subsidiary of Steinel GmbH & Co. KG, a German manufacturer of technology for sensor-controlled lighting and delivery of controlled heat that is headquartered in Herzebrock-Clarholz, Germany and was established in 1959. The company provides multiple types of sensors, lighting, and heating products, including motion, occupancy and light sensors, mobile heaters and hot air tools. Its products are used in numerous industries, including the commercial, residential, and industrial industries. Steinel also provides several accessories such as plastic welding rods, heat gun nozzles, heat gun nozzles, temperature guard and thermoflex welding rods.
-
-
-
-
-
TÉCNICAS E INGENIERÍA DE PROTECCIÓN, SAU
firefighting nozzles
Manufacturer Overview
TÉCNICAS E INGENIERÍA DE PROTECCIÓN, SAU, founded in 1953 and based in Barcelona, Spain, is a manufacturer of lay-flat hoses and fire equipment. The company manufactures lay-flat hoses and fire equipment like firefighting nozzles for different industries, such as firefighting & emergency, agriculture and water wells. Additionally, it also offers a wide range of couplings and hose related accessories. Its product portfolio includes brands like ARMTEX and BLINDEX in the hose range, and VIPER in the fire nozzle range.
-
-
-
-
-
Armaturenwerk Hötensleben GmbH
Rotating Spray Heads
Manufacturer Overview
Armaturenwerk Hötensleben GmbH, established in 1992 and based in Völpke, Germany, is a manufacturer of stainless-steel components. The company produces products such as fittings, strainers, sight glasses, pipes &assembly accessories, and tank equipment and supplies to food, cosmetics, chemical, and pharmaceutical industries. The products of this company are manufactured using manufacturing technologies in the area of cleaning technology, valve technology, and pigging technology and abides by ISO 9001:2015 standards. The company has offices in the USA, Netherlands and Belgium.
-
-
-
-
-
Adam Pumps S.p.A.
UREA NOZZLES
Manufacturer Overview
Adam Pumps S.p.A. was founded in 2010 and is headquartered in Campogalliano, Italy is a manufacturer of pumps and meters for gasoline. The company offers an array of products including oil flow display meters, diesel fuel transfer pumps, and transfer kits for transporting urea. These products find applications in waste and management plants, petrochemical industries, and oil and gas refineries. Its philosophy is to ensure continuous improvement of the products, and fast response to the customer’s requirements.
-
-
-
-
-
ANEST IWATA Corporation
Manual Spray Guns
Manufacturer Overview
ANEST Iwata Corporation, founded in 1926 in Yokohama, Japan, is a manufacturer of air compressors, spray guns, coating equipment, and vacuum pumps. The company specializes in precision spray equipment and air compressor manufactures a diverse variety of products including but not limited to air compressor, Nitrogen gas generator, food equipment, painting robots and energy saving exhaust set. The products are used in industrial manufacturing, woodworking, aerospace, automotive and similar production industries for various applications such as suction transfer, gas replacement, optimal coating process, uniform material usage in production and producing compressed air for pneumatic equipment.
-
-
-
-
-
Shilham Boilie Rollers
Yellow Gun Nozzles
Manufacturer Overview
Shilham Boilie Rollers, established in 2015 and headquartered in Burton, England, United Kingdom, is a manufacturer of bait rolling equipment and fishing baits. The company's product range includes boilie rollers, bait-making accessories, custom fishing bait, and specialized bait tools. Its products provide benefits such as efficiently creating custom fishing baits, ensuring bait consistency, and enhancing fishing success. These offerings are frequently used by fishing enthusiasts, bait companies, and tackle shops seeking to create bespoke and effective baits for various fishing applications.
-
-
-
-
-
YAMAGUCHI GIKEN co., ltd.
Auto spray guns
Manufacturer Overview
YAMAGUCHI GIKEN Co., Ltd., established in 1974 and headquartered in Hiroshima, Japan, is a manufacturer of die-casting products and accessories. The company specializes in manufacturing a broad range of products, including spray guns, nozzles, lubricating devices, and pressure feed equipment. It holds ISO 9001 certification, and the products offer benefits such as efficient coating and lubrication, reduced waste, and improved process productivity. The products are frequently used in various industries, including automotive, manufacturing, agriculture, and construction, where precise application and distribution of coatings, lubricants, and fluids are important.
-
-
-
-
-
ELAFLEX HIBY GmbH & Co. KG
Nozzles + Spare Parts
Company Overview
ELAFLEX HIBY GmbH & Co. KG is an ISO 9001-certified manufacturer and supplier of refueling equipment that was established in Hamburg, Germany, in 1923. The company specializes in products and equipment facilitating safe connections for transferring sensitive fluids such as petrol or chemicals. These products include nozzles, hoses, and couplings manufactured to various standards. It also offers breakaways and casting products such as valve bodies, pump housings, and impellers. The company’s products are commonly used in the oil and gas, chemical, and marine industries.
-
-
-
-
-
PNR Italia Srl
Fixed Cleaning Heads
Company Overview
PNR Italia Srl is based in Voghera, Pavia, Italy, and is a manufacturer and distributor of spraying products that was established in 1968 before its acquisition by the Spraylab Group in 2018. The company offers spray nozzles for creating different spray patterns or pressure levels, such as full cone, flat fan, and fog. It also offers hydraulic, pneumatic, and twin fluid atomizer models, along with tank washing heads for cleaning or sanitizing tank exteriors. The company mainly serves clients in the chemical, water treatment, and automotive industries.
-
-
-
-
-
Berizzi srl
Spray guns nozzles
Company Overview
Berizzi srl is a manufacturer of parts and components for fluid handling. The company is headquartered in Calolziocorte, Northern Italy and was founded in 1996. The company manufactures, and supplies pumps and guns for paint spraying and fluid handling. Its products include APOLLO - Piston Pneumatic Pumps, APOLLO TRANSFER - Piston Pneumatic Transfer Pumps, APOLLO EXTRUSION - Pneumatic Extrusion Pumps, TSUNAMI - Electric Diaphragm Pumps and MISTRAL - Peristaltic Pumps. Its products are used in many industries, including plumbing, construction, and agriculture. The company also offers technical support, installation, assistance, repair and maintenance services for its fluid-handling equipment to its distributors.
-
-
Gun Nozzle Manufacturer Ranking
*Including some distributors, etc.Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | INPRO Technologies, Inc. |
14.6%
|
| 2 | Adam Pumps S.p.A. |
12.2%
|
| 3 | YAMAGUCHI GIKEN co., ltd. |
12.2%
|
| 4 | Steinel America Inc. |
12.2%
|
| 5 | ANEST IWATA Corporation |
9.8%
|
| 6 | ELAFLEX HIBY GmbH & Co. KG |
7.3%
|
| 7 | Fusion Inc. |
7.3%
|
| 8 | Shilham Boilie Rollers |
7.3%
|
| 9 | PNR Italia Srl |
4.9%
|
| 10 | Armaturenwerk Hötensleben GmbH |
4.9%
|
Derivation Method
The ranking is calculated based on the click share within the gun nozzle page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- ANEST IWATA Corporation: 1,799
- Steinel America Inc.: 1,200
- Armaturenwerk Hötensleben GmbH: 440
Newly Established Company
- Adam Pumps S.p.A.: 2010 (14 years ago)
- YAMAGUCHI GIKEN co., ltd.: 1974 (50 years ago)
- PNR Italia Srl: 1968 (56 years ago)
Company with a History
- Armaturenwerk Hötensleben GmbH: 1859 (165 years ago)
- ELAFLEX HIBY GmbH & Co. KG: 1913 (111 years ago)
- Steinel America Inc.: 1959 (65 years ago)
Gun Nozzle Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Gun Nozzle Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
3 | 25.0% |
Italy
|
3 | 25.0% |
Germany
|
2 | 16.7% |
Japan
|
2 | 16.7% |
Spain
|
1 | 8.3% |
United Kingdom
|
1 | 8.3% |
List of Gun Nozzle Products
15 products are listed.
A & C Service Co., Ltd.
Food, chemicals, and cosmetics manufacturing plants cleaning gun for food factory SEN3
40+ people viewing
■ Item explanation Washing food, chemicals and cosmetics manufacturing plants, and applying liquids that require chemical resistance.
Seiwa Industry Co., Ltd.
Grinding / polishing handy sander braster gun HSB3
30+ people viewing
■ Features ・ The coating and rust can be peeled off ・ The surface is also possible (etching) ・ It is made of resin and is light and improves wor...
ANEST IWATA Corporation
Small spray gun pressure shipping type, suction type, gravity type (side cup) WIDER1 series
40+ people viewing
The most important thing in industrial painting products is quality and stability. 14 years have passed since the release of our best-selling small...
SNK Bio
0.01 μm Fine particle removal high -performance hollow -type filter with hollow -and -air filter Air gun
30+ people viewing
Last viewed: 11 hours ago
Introducing an air gun with a filter that is lightweight and compact and easy to use. Introducing an air gun with a high hollow thread filter with...
