10 Fiberglass Reinforced Plastic (FRP) Panel Manufacturers in 2024
This section provides an overview for fiberglass reinforced plastic (frp) panels as well as their applications and principles. Also, please take a look at the list of 10 fiberglass reinforced plastic (frp) panel manufacturers and their company rankings. Here are the top-ranked fiberglass reinforced plastic (frp) panel companies as of November, 2024: 1.Interstate Plastics, 2.AWMCO, Incorporated, 3.Nudo.
Table of Contents
What Is a Fiberglass Reinforced Plastic (FRP) Panel?
Fiberglass-reinforced plastic (FRP) panels are made from fiber-reinforced plastics, which combine glass and carbon fibers—materials known for high tensile strength and rigidity—with lightweight plastics. This composition results in panels that are lightweight yet exhibit high strength and rigidity. The type of fiber used can vary, leading to different types of reinforced plastics such as CFRP (Carbon Fiber Reinforced Plastics), GFRP (Glass Fiber Reinforced Plastics), and AFRP (Aramid Fiber Reinforced Plastics).
FRP panels are not only used for large parts due to their strength but are also suitable for smaller components that require resistance to punching.
Uses of Fiberglass Reinforced Plastic (FRP) Panels
Due to their thin, lightweight, and strong nature, FRP panels are utilized in a diverse range of applications, from everyday items to industrial products. Small-sized FRP panels are used in radio-controlled car frames and handmade lure lips, while larger applications include ship construction, factory light roofing materials, sports car aero parts, and even airplanes.
Principle of Fiberglass Reinforced Plastic (FRP) Panels
FRP panels are created by impregnating reinforcing fibers with matrix resin. The strength and rigidity of the panels depend on the fiber type, its arrangement, and the fiber-to-resin ratio. During manufacturing, protective gel coat resin is applied to a mold, followed by shaping of the glass fibers. Layers of plastic resin are then applied, and the process is repeated until the desired thickness is achieved. Commonly used base materials include polyester resin, vinyl ester resin, epoxy resin, and phenolic resin.
Other Information on Fiberglass Reinforced Plastic (FRP) Panels
Characteristics of Fiberglass Reinforced Plastic (FRP) Panels
FRP panels exhibit several key characteristics:
- Lightweight and High Strength: FRP panels are significantly lighter than metal materials while maintaining comparable strength. They have a specific gravity much lower than iron or aluminum and a specific strength several times higher than steel.
- High Environmental Resistance: Unlike steel, FRP panels do not rust, and unlike wood, they do not rot. However, this durability poses challenges in terms of recycling and environmental impact.
- Good Weather Resistance: The resin coating on FRP panels protects against environmental deterioration. Even if the resin wears, the underlying fibers maintain the panel's strength. The material's resistance to UV rays and rain makes it a popular choice for roofing, particularly in parking lots to block heat rays.
List of 10 Fiberglass Reinforced Plastic (FRP) Panel Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
-
-
-
InPlant Offices Incorporated
FRP Faced Wall Panels
Manufacturer Overview
InPlant Offices Incorporated is a manufacturer of modular building and partition wall systems that was established in 1987 in St. Louis, Missouri. The company produces standard as well as custom machinery enclosures that act as protective barriers and noise control solutions for hazardous or loud equipment. It also offers modular offices, and portable buildings designed to be movable and easily relocated for temporary use cases. The company provides custom product or system design, installation, and relocation services for clients needing additional support.
-
-
-
-
-
Interstate Plastics
FRP Panels
Manufacturer Overview
Interstate Plastics, established in 1980 and headquartered in Sacramento, California, USA, is a full-line distributor of plastic products. The company supplies a wide range of plastic sheet, rod, tube & bar, film, and profiles, along with accessories and care products. From laser cutting to various plastic materials, it caters to diverse industries such as semiconductor, medical, and aerospace. The company also offers full sheets, cut-to-size options, and CNC plastic manufacturing solutions. With a DMCA-protected product line and Level 2 verification, the company operates in over 10 locations across the nation, including Sacramento, Austin, and Boise.
-
-
-
-
Manufacturer Overview
Nudo is based in Springfield, Illinois, and is a manufacturer of wall as well as ceiling panels that was established in 1954 before its acquisition by Verzatec in 2015. The company primarily produces moisture-resistant, fire-rated, and decorative wall panels for exterior or interior walls. It also offers various ceiling panels, along with low- and high-pressure laminates for application to a wide range of surface types. The company provides comprehensive fabrication capabilities for its clients, including routing, cutting, and bonding services.
-
-
-
-
-
-
-
-
Tucker Acoustical Products
Fiberglass Reinforced Plastic Panels
Distributor Overview
Tucker Acoustical Products is based in Tucker, Georgia, and is an American distributor of wallboard and suspended ceilings systems originally founded in 1969 before being acquired by Gypsum Management and Supply (GMS) Inc. in 2016. The company specializes in acoustical ceiling and insulating products for commercial and residential construction. Its products include SAFB mineral wool insulation, acoustical ceiling tiles, and fiber-reinforced plastic (FRP) panels. The company also offers related accessories and products, such as fire-rated CDX plywood, steel fasteners, and all-purpose drywall mud for joint treatment or sealing.
-
-
-
-
-
Kamco Supply
Panolam Fiberglass Reinforced Plastic (FRP) Panels
Distributor Overview
Kamco Supply is an American WBENC-certified distributor of construction supplies and building materials that was established in Brooklyn, New York, in 1939. The company primarily stocks decking supplies such as dimensional lumber, insulation materials such as loose fill insulation for sound or thermal control applications, and acoustical ceiling tiles or panels. It also offers door hardware products, including hinges, closers, and frames. The company mainly markets to clients in the commercial, residential, and government sectors.
-
-
-
-
-
GOLDEN VALLEY SUPPLY COMPANY
Fiberglass Reinforced Plastics
Distributor Overview
Golden Valley Supply Company is an American distributor of interior finishing materials that was established in 1975 in Minneapolis, Minnesota. The company’s product inventory includes joint compounds for drywall, various specialty ceiling systems, and steel framing systems using light gauge steel studs. It also offers mineral wool and fiberglass insulation, as well as sound design services for unique customer projects. The company has a total of six locations in the American Midwest, with distribution and marketing operations in states like Virginia and Maine.
-
-
-
-
Company Overview
Kal-Lite, based in Bow, New Hampshire, is a manufacturer and supplier of both opaque and translucent fiberglass-reinforced plastic (FRP) for walls, ceilings, and other custom projects. The material has several applications and can be used in food service, clean rooms, veterinary hospitals, food processing, and industrial environments. The company also provides custom FRPs so consumers can choose the size, color, texture, and finish of choice. The company’s main solar products are made from Sun Lite HP solar glazing material developed by Kalwall Corporation. This material is lightweight, shatterproof, and has an 85-90% solar transmission.
-
-
-
-
Risk Logic Inc.
Fiber reinforced plastic (FRP) panels
-
-
Fiberglass Reinforced Plastic (FRP) Panel Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Interstate Plastics |
19.9%
|
| 2 | AWMCO, Incorporated |
12.0%
|
| 3 | Nudo |
11.8%
|
| 4 | Kamco Supply |
11.0%
|
| 5 | InPlant Offices Incorporated |
10.7%
|
| 6 | AIA |
10.4%
|
| 7 | Kal-Lite |
7.8%
|
| 8 | Tucker Acoustical Products |
6.0%
|
| 9 | Risk Logic Inc. |
5.7%
|
| 10 | GOLDEN VALLEY SUPPLY COMPANY |
4.7%
|
Derivation Method
The ranking is calculated based on the click share within the fiberglass reinforced plastic (frp) panel page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
- Risk Logic Inc.: 1997 (27 years ago)
- AIA: 1857 (167 years ago)
Company with a History
- AIA: 1857 (167 years ago)
- Risk Logic Inc.: 1997 (27 years ago)
Fiberglass Reinforced Plastic (FRP) Panel Manufacturers in United States
*Including some distributors, etc.
- InPlant Offices Incorporated
- Interstate Plastics
- Nudo
- AIA
- AWMCO, Incorporated
- Tucker Acoustical Products
- Kamco Supply
- GOLDEN VALLEY SUPPLY COMPANY
Global Distribution of Fiberglass Reinforced Plastic (FRP) Panel Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
8 | 100.0% |
List of Fiberglass Reinforced Plastic (FRP) Panel Products
2 products are listed.
Nitto El Material Co., Ltd.
FRP plate laminated plate SL-ME/SL-MP with excellent insulating properties
80+ people viewing
Last viewed: 7 hours ago
An reinforced plastic plate that is applied to a glass cross mat uniformly and heats and pressurized with a high -voltage and multi -stage press ma...
