Dry Incubator EC10
Astec Co., Ltd.
About This Product
10 chamber New model of individual culture type dry incubator
■ Features
・ Individual culture type dry incubator
・ Reduces depth and height and easy to access the chamber in the back
・ Gas recycling model with reduced gas consumption (our own technology)
・ High quality incubator with reduced contamination risk
・ 3 -stage vertical placement is also possible (dedicated standing base)
■ Compact design
By using a dedicated gantry, it is possible to install up to three units in one place. Compared to the conventional 6 chamber products, the depth is 638 → 610, and the height is 168 → 107 mm, so even if you assemble the two -stage group and three -stage, the back chamber is easier to use. 。
■ Improvement of the Chamber Lock Organization
With the improvement of the chamber lock mechanism, the chamber can be opened and closed with one hand, and the handling when the dish is put in and out has been improved. From the conventional horizontal slide lock, it has been changed to a design that shows the sound when closed, making it easier to confirm that it has been locked.
■ "Easy to check the temperature"
EC10 has a secondary temperature sensor on each chamber. The sensor read value can be obtained from the port on the front of the device. It is now possible to check the temperature every day with the dish in.
■ Easy cleaning
The plate to place the dish can be removed. The plate itself can also sterilize. The inside of the chamber after removal has a structure that is easy to clean without unevenness, so it does not take time and effort to take care of it every day.
■ Stable thermal conductivity by dedicated plate
In order to increase the temperature accuracy, a dedicated plate for 35mm, 60mm, and 4 welldish will be installed and operated. Each plate can store up to 35mm x 6 sheets, 60mm x 3 sheets, 4well x 2 sheets, respectively. The plate supports dry heat. You can also create a custom plate and flat plate.
■ Equipped with a peep window that allows you to check the inside without opening
There is a peep window that allows you to check inside the chamber without changing the culture environment. The lid is newly equipped with a heater, increasing temperature stability than conventional dry incubators.
-
Product
Dry Incubator EC10
-
Handling Company
Astec Co., Ltd.
1 Models of Dry Incubator EC10
| Product Image | Part Number | Price (excluding tax) | Bottom plate | CO2 concentration control method | CO2 concentration control range | CO2 concentration fluctuation width | CO2 sensor | Chamber capacity | Chamber dimension | Humidification method | Number of chambers | O2 concentration control method | O2 concentration fluctuation width | O2 control range | O2 sensor | Outer diameter dimensions | Product weight | Temperature control range | Temperature fluctuation range | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EC10 |
Available upon quote | 35mm x 6, 60mm x 3, 4 well x 2, flat plate / custom -made plate can be supported | Duty control | 0 % ~ 20.0 % | ± 0.3 % | IR sensor (infrared method) | 350ml | W108 × D180 × H18.5mm/Chamber | Humidified | Ten | Duty control | ± 0.5 % | 0.1 % to 18.0 % | Ceramic oxygen sensor | W660 x D610 x H107mm | 25kg | Room temperature + 5 ℃ ~ 40.0 ℃ | ± 0.1 ℃ | AC100V 50/60Hz 1.5A |
Customers who viewed this product also viewed
Other products of Astec Co., Ltd.
View more products of Astec Co., Ltd.
About Company Handling This Product
- Japan
- Since 1978