Direct heat type CO₂/multi -gas Incubator VCI series
Astec Co., Ltd.
About This Product
■ CO₂ Incubator latest flagship model
With the temperature and gas concentration accuracy as it is, the weight of the inside of the shelf has been reduced. It is possible to check the real -time data of the cells on the LCD screen.
■ Characteristics
・ Easy to use and excellent culture environment
・ Equipped with large liquid crystal touch panel
・ Temperature ・ Gas concentration ・ Alarm -related data can be obtained
・ It is possible to change the door opening according to the layout
・ Built -in cell observation camera inside the incubator (optional)
・ 160 ℃ Dry heat sterilization specification
■ Dry heat sterilization (160 ° C) Equipped with function
There are various methods of sterilization in the warehouse as a countermeasure for contamination. Considering the effects on cells and after -sales maintenance, dry heating is the most suitable for sterilization of CO2 incubators. There is no need to remove the fan and sensor, and you can start sterilization only by panel operation. Because it is 7.5A per unit, it is also possible to drying at the same time with 15A power supply at the same time. In addition, there is no effect on the other culture even during two -stage bacteria.
■ The log function can manage cell culture.
You can get data data for temperature, gas, alarm event. It is possible to create and remove CSV files with USB memory.
■ Lighter weight of the inner shelf
The shelf board strength has not been impaired, and an environment that is easy to clean and eliminates the conventional shelves. Because it is a standard equipment for drying heat, it also supports contamination measures.
■ Cell observation is possible without removing it by attaching a camera into the storage (optional)
It is possible to observe culture cells in the warehouse from the LCD screen of the incubator. Live video, Capture, Time-Lapse is possible. Check the LIVE video without removing the Desh and reduce stress on cells.
■ Space -saving / energy saving design
Designed 10cm in height than conventional products. The upper row of the two -stage stack is also easier to use. The power consumption at the time of stable is 3A, and 7.5A is 7.5A when dry heat. It is also possible to sterilize 2 units at the same time with 15A power supply. In addition, there is no effect on the other culture even if one is sterilized during two -stage overlapping.
-
Product
Direct heat type CO₂/multi -gas Incubator VCI series
-
Handling Company
Astec Co., Ltd.
2 Models of Direct heat type CO₂/multi -gas Incubator VCI series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Access port | CO2 concentration control range | CO2 concentration fluctuation width | CO2 sensor | Dry heat sterilization temperature control range | Dry heat sterilization temperature distribution | Exterior | External dimensions | Humidification method / humidity | Interior | Internal dimensions | Number of shelves | O2 concentration control range | O2 concentration fluctuation width | O2 sensor | Operating temperature limit | Power consumption | Product mass | Safety device | Shelves size | Sterinus temperature setting time | Storage humidity range | Storage temperature range | Temperature control method | Temperature control range | Temperature distribution | Temperature fluctuation range | Used humidity range | Warehouse content | option | power consumption | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
VCI-165P |
Available upon quote | φ29mm (standard equipment) | 0.0 % to 20.0 % | ± 0.1 % | NDIR sensor | 50 ℃ ~ 160 ° C (1 ° C step) | ± 3 ℃ | Electric zinc plated steel plate (painted with powdered body) | W620mm x D740mm x H850mm (not included) | Natural evaporation method (bat water injection), 95 % ± 4 % RH | Stainless steel plate (SUS304, SUS430) | W481mm x D531mm x H640mm | Standard 4 pieces (up to 10) | - | - | - | 10 ℃ ~ 30 ℃ | 75Wh (room temperature 25 ° C, set temperature 37.0 ° C stable operation) | 90kg | Temperature rising function, over -templation warning, CO₂ alarm, O₂ warning, various alarms | W455mm x D468mm x H23mm | 0.1 hours to 10.0 hours | 20 % to 80 % RH | -20 ℃ ~ 50 ℃ | Digital PID control | Room temperature+5 ℃ ~ 50 ° C (0.1 ° C step) | ± 0.3 ℃ | ± 0.1 ℃ | 30 % to 80 % RH | Approximately 163L | Cell monitor, analog output, warning contact output, gas guard, door lock (electronic lock) | 750W (Max.) | Single -phase AC100 V, 50/60 Hz, 7.5 A |
|
|
VMI-165P |
Available upon quote | φ29mm (standard equipment) | 0.0 % to 20.0 % | ± 0.1 % | NDIR sensor | 50 ℃ ~ 160 ° C (1 ° C step) | ± 3 ℃ | Electric zinc plated steel plate (painted with powdered body) | W620mm x D740mm x H850mm (not included) | Natural evaporation method (bat water injection), 95 % ± 4 % RH | Stainless steel plate (SUS304, SUS430) | W481mm x D531mm x H640mm | Standard 4 pieces (up to 10) | 2.0 % to 80.0 % | ± 0.5 % | Galvani battery -type sensor | 10 ℃ ~ 30 ℃ | 75Wh (room temperature 25 ° C, set temperature 37.0 ° C stable operation) | 90kg | Temperature rising function, over -templation warning, CO₂ alarm, O₂ warning, various alarms | W455mm x D468mm x H23mm | 0.1 hours to 10.0 hours | 20 % to 80 % RH | -20 ℃ ~ 50 ℃ | Digital PID control | Room temperature+5 ℃ ~ 50 ° C (0.1 ° C step) | ± 0.3 ℃ | ± 0.1 ℃ | 30 % to 80 % RH | Approximately 163L | Cell monitor, analog output, warning contact output, gas guard, door lock (electronic lock) | 750W (Max.) | Single -phase AC100 V, 50/60 Hz, 7.5 A |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Astec Co., Ltd.
View more products of Astec Co., Ltd.
About Company Handling This Product
- Japan
- Since 1978