On-site PH/ORP meter FEB-102-PH
Shinko Technos Co., Ltd.
About This Product
This is a site -type pH/ORP meter that is installed on the wall that supports various purposes, such as top water, drainage, training equipment, and building equipment.
・ PH meter and ORP meter can be selected by key operation
・ Equipped with 2 points in contact with contact (EVT output) and 2 points (transmission output)
・ Equipped with communication (RS-485) (optional) and washing output function
・ Dustproof / drip -proof structure IP65: Compatible with outdoor use
・ Supports model approval
-
Product
On-site PH/ORP meter FEB-102-PH
-
Handling Company
Shinko Technos Co., Ltd.
3 Models of On-site PH/ORP meter FEB-102-PH
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient temperature | Calibration function | Case, panel | Conformity standard | Drip -proof / dustproof structure | EVT output (2 points) 1 | EVT output (2 points) 2 | EVT output (2 points) 3 | Entering 2 | External dimensions | Input 1 | Input sampling cycle | Linearness | Mounting method | Peripheral humidity | Repetition | Self -diagnostic function | Serial communication (Options: C5) | Serial communication (Options: C5) Communication method | Serial communication (option: C5) cable length | Serial communication (option: C5) communication line | Serial communication (option: C5) communication speed | Serial communication (option: C5) synchronous method | Temperature instruction accuracy | Time accuracy | Transmission output 1, 2-1 | Transmission output 1, 2-2 | mass | power consumption | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FEB-102-pH, CS |
Available upon quote | -20 ~ 50 ° C (how to adapt to the instruction accuracy at 0 to 50 ° C and avoid direct sunlight) | ・ PH calibration 2 points Automatic proofreading or manual proofreading, type of standard solution PH2, 4, 7, 9, 10 (JIS) ・ Temperature school regular (1 point) |
・ Case: Polycarbonate color: Metallic gray ・ Panel: Membrane sheet |
ROHS command support | IP65 |
・ Setting accuracy: Same as instruction accuracy ・ Output operation: P operation proportional belt other than 0, when the ON/OFF operation proportional belt is set to 0. ・ Relay contact 1A |
・ Control capacity: 3A 250V AC (resistance load), 1A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
・ Operation ON delay timer: 0 to 10000 seconds ・ Operation OFF delay timer: 0 to 10000 seconds |
ORP composite electrode sensor (temperature element: CU500/25 ° C, PT100 or PT1,000) | W239.5xh190XD75mm | PH composite electrode sensor (PH sensor: JIS Z8802 compliant, temperature element: CU500/25 ° C, PT100 or PT1000) | 125 MS (2 input) | PH meter: ± 0.05PH, ORP meter: within ± 5mv (in equivalent input) | Wall installation method | 35 ~ 95%RH (but not condensation) | PH meter: ± 0.05PH, ORP meter: within ± 5mv (in equivalent input) | Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. | Perform the following operations from the external computer.・ Reading and setting of various set values ・ Change, adjustment of functions / functions of ORP or status | Half double communication | 1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) | EIA RS-485 compliant | Select 9600, 19200, 38400 BPS by key operation | Toning synchronization | ± 1 ℃ | Within ± 1%for the set time | PH, temperature, ORP value, and MV are converted to analog amount for each input sampling and output in current. (The decimal position is fixed regardless of the decimal position selection) | ・ Dusive ability: 12000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: within ± 0.3%of transmission output span | Approximately 950g | Approximately 9 VA | 100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
|
|
FEB-102-PH, EVT3 |
Available upon quote | -20 ~ 50 ° C (how to adapt to the instruction accuracy at 0 to 50 ° C and avoid direct sunlight) |
・ PH calibration 2 points Automatic proofreading or manual proofreading, type of standard solution pH2, 4, 7, 9, 10 (JIS) ・ Temperature school regular (1 point) |
・ Case: Polycarbonate color: Metallic gray ・ Panel: Membrane sheet |
ROHS command support | IP65 |
・ Setting accuracy: Same as instruction accuracy ・ Output operation: P operation proportional belt other than 0, when the ON/OFF operation proportional belt is set to 0. ・ Relay contact 1A |
・ Control capacity: 3A 250V AC (resistance load), 1A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
・ Operation ON delay timer: 0 to 10000 seconds ・ Operation OFF delay timer: 0 to 10000 seconds |
ORP composite electrode sensor (temperature element: CU500/25 ° C, PT100 or PT1000) | W239.5xh190XD75mm | PH composite electrode sensor (PH sensor: JIS Z8802 compliant, temperature element: CU500/25 ° C, PT100 or PT1000) | 125 MS (2 input) | PH meter: ± 0.05PH, ORP meter: within ± 5mv (in equivalent input) | Wall installation method | 35 ~ 95%RH (but not condensation) | PH meter: ± 0.05PH, ORP meter: within ± 5mv (in equivalent input) | Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
Perform the following operations from the external computer. ・ Read and set various set values ・ Reading pH, temperature, ORP value or state ・ Change and adjust function |
Half double communication | 1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) | EIA RS-485 compliant | Select 9600, 19200, 38400 BPS by key operation | Toning synchronization | ± 1 ℃ | Within ± 1%for the set time | PH, temperature, ORP value, and MV are converted to analog amount for each input sampling and output in current. (The decimal position is fixed regardless of the decimal position selection) |
・ Resolution: 12,000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: within ± 0.3%of transmission output span |
Approximately 950g | Approximately 9 VA | 100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
|
|
FEB-102-PH, EVT4 |
Available upon quote | -20 ~ 50 ° C (how to adapt to the instruction accuracy at 0 to 50 ° C and avoid direct sunlight) |
・ PH calibration 2 points Automatic proofreading or manual proofreading, type of standard solution pH2, 4, 7, 9, 10 (JIS) ・ Temperature school regular (1 point) |
・ Case: Polycarbonate color: Metallic gray ・ Panel: Membrane sheet |
ROHS command support | IP65 |
・ Setting accuracy: Same as instruction accuracy ・ Output operation: P operation proportional belt other than 0, when the ON/OFF operation proportional belt is set to 0. ・ Relay contact 1A |
・ Control capacity: 3A 250V AC (resistance load), 1A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
・ Operation ON delay timer: 0 to 10000 seconds ・ Operation OFF delay timer: 0 to 10000 seconds |
ORP composite electrode sensor (temperature element: CU500/25 ° C, PT100 or PT1000) | W239.5xh190XD75mm | PH composite electrode sensor (PH sensor: JIS Z8802 compliant, temperature element: CU500/25 ° C, PT100 or PT1000) | 125 MS (2 input) | PH meter: ± 0.05PH, ORP meter: within ± 5mv (in equivalent input) | Wall installation method | 35 ~ 95%RH (but not condensation) | PH meter: ± 0.05PH, ORP meter: within ± 5mv (in equivalent input) | Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
Perform the following operations from the external computer. ・ Read and set various set values ・ Reading pH, temperature, ORP value or state ・ Change and adjust function |
Half double communication | 1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) | EIA RS-485 compliant | Select 9600, 19200, 38400 BPS by key operation | Toning synchronization | ± 1 ℃ | Within ± 1%for the set time | PH, temperature, ORP value, and MV are converted to analog amount for each input sampling and output in current. (The decimal position is fixed regardless of the decimal position selection) | ・ Dusive ability: 12000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: within ± 0.3%of transmission output span | Approximately 950g | Approximately 9 VA | 100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan
- Since 1945
- 185 employees