Plug-in type 2ch digital instruction adjustment meter WCL-13A
Shinko Technos Co., Ltd.
About This Product
It is a plug -in adjustment meter with 2ch display. It can be used for "channel difference", "channel addition", "cascade control", "heating cooling control" unique to 2ch.
・ Input sampling selection (25ms/125ms/250ms)
・ Equipped with control timer function
・ Input/control/output block can be freely replaced
■ Combination is possible according to the application
2ch adjustment meter specification
・ Channel difference input
・ Channel additional input
・ Heat cooling control output specification
・ Cascade control specification
・ External setting input specification
・ 1 input 2 output specification
・ Transmission output specification
Adjustment meter+timer specification
・ Control timer specification
・ Delay timp specification
■ Space saving
This size is 2ch! Contributes to the miniaturization of the control panel.
30 × 88 × 110mm (including W × H × D, including socket)
■ Energy saving
・ Automatic dimming function
This is a function to measure illuminance by detecting optical sensor on the front and adjust the brightness of the display. When multiple units are connected, it contributes to energy saving.
・ Display lighting function
This is a function to turn off the display if you do not operate any set time in the display time setting. In the display, you can select PV, SV, and turn off by key operation.
■ Input / output type of each channel can be selected individually
·input
Each channel can be selected by key operation from heat electricity vouchers, measuring temperature resistors, DC current, and DC voltage. It also supports infrared thermal electricity (RD-300, RD-400).
(Example) CH1 input: thermoelectric dating, ch2 input: DC voltage
·output
Each channel can be specified from the relay contact, non -contact voltage or DC current output.
(Example) CH1 control output: relay contact output, CH2 control output: DC current output
■ Input sampling can be selected
You can select the input sampling by key operation from 25ms, 125ms, 250ms. By selecting the optimal sampling according to the control target, you can perform high -precision control.
■ Equipped with block function on console software
The console software has a block function. Input blocks, control blocks, and output blocks for each channel can be freely reconciled. By combining the application, you can customize various specifications.
■ Other functions
There are other functions below.
・ Read and set various set values, such as SV, PID, etc.
・ PV and operating status read
・ Change of function
* There are other model numbers
-
Product
Plug-in type 2ch digital instruction adjustment meter WCL-13A
-
Handling Company
Shinko Technos Co., Ltd.
10 Models of Plug-in type 2ch digital instruction adjustment meter WCL-13A
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | External dimensions | Input DC current | Input DC voltage 1 | Input DC voltage 2 | Input infrared thermal electrician | Input measurement temperature resistor | Input thermoelectric dating | Material | Measurement range scale 0 ~ 1V input | Measurement range scale 0 ~ 5V input | Measurement range scale 0-10V input | Measurement range scale 1 ~ 5V input | Measurement range scale B input | Measurement range scale C (W/Re5-26) Enter | Measurement range scale E input | Measurement range scale J input | Measurement range scale JPT100 input | Measurement range scale N input | Measurement range scale R input | Measurement range scale T input | Measurement range scale infrared thermal electricity opposite input | Measurement range scale range 0 ~ 20mA (*1) Enter | Measurement range scale range 4 ~ 20mA (*1) input | Measurement range scale range K input | Measurement range scale range PL-II input | Measurement range scale range PT100 input | Measurement range scale scales S input | Mounting method | Power-supply voltage | Tolerance fluctuation range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
WCL-13A-RR/mm |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, S, S, B, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) | Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 85 ~ 264V AC |
|
|
WCL-13A-RR/MP |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 85 ~ 264V AC |
|
|
WCL-13A-RR/MT |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 85 ~ 264V AC |
|
|
WCL-13A-RR/mm 1 |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 24V AC/DC 50/60Hz | 20-28V AC/DC |
|
|
WCL-13A-RR/MP 1 |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 24V AC/DC 50/60Hz | 20-28V AC/DC |
|
|
WCL-13A-RR/MT 1 |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 24V AC/DC 50/60Hz | 20-28V AC/DC |
|
|
WCL-13A-SR/mm |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Outdoor receiver 50 (separately sold) is required. (*2): You can select scaling and decimal position. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 85 ~ 264V AC |
|
|
WCL-13A-SR/MP |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 85 ~ 264V AC |
|
|
WCL-13A-SR/MT |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 85 ~ 264V AC |
|
|
WCL-13A-SR/mm 1 |
Available upon quote | 30 x 88 x 110mm (including horizontal x vertical x depth, including socket) |
・ 0 ~ 20mA, 4 ~ 20ma DC ・ Input impedance 50Ω ・ Available input current 50mA or less |
・ 0 ~ 1V DC ・ Input impedance 1mΩ or more ・ Tolerance input voltage 5V DC or less ・ Telegrated signal source resistance 2kΩ or less |
・ 0 ~ 5V, 1 ~ 5V, 0 ~ 10V DC ・ Input impedance 100kΩ or more ・ Tolerance input voltage 15V DC or less ・ Telegrated signal source resistance 100Ω or less |
RD-300 series, RD-401 |
・ PT100, JPT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance of 100Ω (but B40Ω or less) |
Case: flame retardant resin | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | -1999 ~ 9999 (*2) (*2): Scaling and decimal point position can be selected. | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -199.9 ~ 500.0 ° C/-199.9 ~ 900.0 ° F, -200 ~ 500 ° C/-300 ~ 900 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -199.9 ~ 400.0 ℃/-199.9 ~ 750.0 ° F | -50 ~ 500 ° C/-58 ~ 932 ° F | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -1999 ~ 9999 (*2) (*1): Inbox 50 (separately sold) is required. (*2): You can select scaling and decimal point. | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -199.9 ~ 400.0 ° C/-199.9 ~ 750.0 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -199.9 ~ 850.0 ° C/-199.9 ~ 999.9 ° F, -200 ~ 850 ° C/-300 ~ 1500 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | DIN rail mounting method | 24V AC/DC 50/60Hz | 20-28V AC/DC |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan
- Since 1945
- 185 employees