Power adjustment instrument power controller PA-3000

6 Models of Power adjustment instrument power controller PA-3000

Items marked with have different values depending on the model number.

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Ambient temperature	Applied load	Attached function gradient setting function	Attached function lower limit setting function	Included function software start time setting	Input resistance	Insulation resistance	Minimum load current	Mounting method	Other features	Output range	Output setting range	Peripheral humidity	Rated current	Rated frequency	Rated voltage	Withstand voltage	accessories	control method	input signal	mass
PA-3020-Hz	Available upon quote	-15 ~ 55 ° C (operation guarantee), 0 to 40 ° C (performance guarantee)	Resistance load, inducing load (transformer primary side control, magnetic flux density of 1.25t or less, only phase control method)	The output gradient can be set to the input signal by the internal volume. It is also possible to attach the gradient setting device externally.	By the internal volume, the output change width can be varied for the on -off setting input signal, and detailed control is possible. It is also possible to attach the lower limit configuration externally.	By setting the soft start / soft -up and down time, it can respond to sudden changes in the load voltage, sudden changes in input signal, etc., reducing overload to the load, such as overcurrent occurrence.	100Ω (4 ~ 20mA DC), 25kΩ (1 ~ 5V DC)	500V DC 20mΩ or more between the power supply terminal and the case	0.5A (output 98%)	Surface mounting method	Soft start / soft -up -down (1 to 20 second variable), soft start when the instant stop is returned	0 to 98% of rated voltage	・ Slope setting (0 to 100%) ・ Lower setting (0 to 100%)	30-90%RH	20A	・ 50/60Hz (automatic switching) ・ Available frequency fluctuation rated frequency ± 2Hz (operation guarantee), ± 1Hz (performance guarantee)	・ 100 ~ 120V AC and 200 ~ 240V AC ・ The 100V system and the 200V system are shared (terminal switching) ・ 90-110% of the permissive voltage fluctuation range rated voltage	2000V AC 1 minute between the power supply terminal and ground (heat dissipation fin)	1 part of the instruction manual	Phase control/minute control (switching by internal switch)	DC current 4 ~ 20mA DC, DC voltage 1 ~ 5V DC or on -off point signal (switched by terminal)	Approximately 1.0kg
PA-3030-Hz	Available upon quote	-15 ~ 55 ° C (operation guarantee), 0 to 40 ° C (performance guarantee)	Resistance load, inducing load (transformer primary side control, magnetic flux density of 1.25t or less, only phase control method)	The output gradient can be set to the input signal by the internal volume. It is also possible to attach the gradient setting device externally.	By the internal volume, the output change width can be varied for the on -off setting input signal, and detailed control is possible. It is also possible to attach the lower limit configuration externally.	By setting the soft start / soft -up and down time, it can respond to sudden changes in the load voltage, sudden changes in input signal, etc., reducing overload to the load, such as overcurrent occurrence.	100Ω (4 ~ 20mA DC), 25kΩ (1 ~ 5V DC)	500V DC 20mΩ or more between the power supply terminal and the case	0.5A (output 98%)	Surface mounting method	Soft start / soft -up -down (1 to 20 second variable), soft start when the instant stop is returned	0 to 98% of rated voltage	・ Slope setting (0 to 100%) ・ Lower setting (0 to 100%)	30-90%RH	30A	・ 50/60Hz (automatic switching) ・ Available frequency fluctuation rated frequency ± 2Hz (operation guarantee), ± 1Hz (performance guarantee)	・ 100 ~ 120V AC and 200 ~ 240V AC ・ The 100V system and the 200V system are shared (terminal switching) ・ 90-110% of the permissive voltage fluctuation range rated voltage	2000V AC 1 minute between the power supply terminal and ground (heat dissipation fin)	1 part of the instruction manual	Phase control/minute control (switching by internal switch)	DC current 4 ~ 20mA DC, DC voltage 1 ~ 5V DC or on -off point signal (switched by terminal)	Approximately 1.0kg
PA-3040-Hz	Available upon quote	-15 ~ 55 ° C (operation guarantee), 0 to 40 ° C (performance guarantee)	Resistance load, inducing load (transformer primary side control, magnetic flux density of 1.25t or less, only phase control method)	The output gradient can be set to the input signal by the internal volume. It is also possible to attach the gradient setting device externally.	By the internal volume, the output change width can be varied for the on -off setting input signal, and detailed control is possible. It is also possible to attach the lower limit configuration externally.	By setting the soft start / soft -up and down time, it can respond to sudden changes in the load voltage, sudden changes in input signal, etc., reducing overload to the load, such as overcurrent occurrence.	100Ω (4 ~ 20mA DC), 25kΩ (1 ~ 5V DC)	500V DC 20mΩ or more between the power supply terminal and the case	0.5A (output 98%)	Surface mounting method	Soft start / soft -up -down (1 to 20 second variable), soft start when the instant stop is returned	0 to 98% of rated voltage	・ Slope setting (0 to 100%) ・ Lower setting (0 to 100%)	30-90%RH	40A	・ 50/60Hz (automatic switching) ・ Available frequency fluctuation rated frequency ± 2Hz (operation guarantee), ± 1Hz (performance guarantee)	・ 100 ~ 120V AC and 200 ~ 240V AC ・ The 100V system and the 200V system are shared (terminal switching) ・ 90-110% of the permissive voltage fluctuation range rated voltage	2000V AC 1 minute between the power supply terminal and ground (heat dissipation fin)	1 part of the instruction manual	Phase control/minute control (switching by internal switch)	DC current 4 ~ 20mA DC, DC voltage 1 ~ 5V DC or on -off point signal (switched by terminal)	Approximately 1.3kg
PA-3050-Hz	Available upon quote	-15 ~ 55 ° C (operation guarantee), 0 to 40 ° C (performance guarantee)	Resistance load, inducing load (transformer primary side control, magnetic flux density of 1.25t or less, only phase control method)	The output gradient can be set to the input signal by the internal volume. It is also possible to attach the gradient setting device externally.	By the internal volume, the output change width can be varied for the on -off setting input signal, and detailed control is possible. It is also possible to attach the lower limit configuration externally.	By setting the soft start / soft -up and down time, it can respond to sudden changes in the load voltage, sudden changes in input signal, etc., reducing overload to the load, such as overcurrent occurrence.	100Ω (4 ~ 20mA DC), 25kΩ (1 ~ 5V DC)	500V DC 20mΩ or more between the power supply terminal and the case	0.5A (output 98%)	Surface mounting method	Soft start / soft -up -down (1 to 20 second variable), soft start when the instant stop is returned	0 to 98% of rated voltage	・ Slope setting (0 to 100%) ・ Lower setting (0 to 100%)	30-90%RH	50A	・ 50/60Hz (automatic switching) ・ Available frequency fluctuation rated frequency ± 2Hz (operation guarantee), ± 1Hz (performance guarantee)	・ 100 ~ 120V AC and 200 ~ 240V AC ・ The 100V system and the 200V system are shared (terminal switching) ・ 90-110% of the permissive voltage fluctuation range rated voltage	2000V AC 1 minute between the power supply terminal and ground (heat dissipation fin)	1 part of the instruction manual	Phase control/minute control (switching by internal switch)	DC current 4 ~ 20mA DC, DC voltage 1 ~ 5V DC or on -off point signal (switched by terminal)	Approximately 1.3kg
PA-3075-Hz	Available upon quote	-15 ~ 55 ° C (operation guarantee), 0 to 40 ° C (performance guarantee)	Resistance load, inducing load (transformer primary side control, magnetic flux density of 1.25t or less, only phase control method)	The output gradient can be set to the input signal by the internal volume. It is also possible to attach the gradient setting device externally.	By the internal volume, the output change width can be varied for the on -off setting input signal, and detailed control is possible. It is also possible to attach the lower limit configuration externally.	By setting the soft start / soft -up and down time, it can respond to sudden changes in the load voltage, sudden changes in input signal, etc., reducing overload to the load, such as overcurrent occurrence.	100Ω (4 ~ 20mA DC), 25kΩ (1 ~ 5V DC)	500V DC 20mΩ or more between the power supply terminal and the case	0.5A (output 98%)	Surface mounting method	Soft start / soft -up -down (1 to 20 second variable), soft start when the instant stop is returned	0 to 98% of rated voltage	・ Slope setting (0 to 100%) ・ Lower setting (0 to 100%)	30-90%RH	75A	・ 50/60Hz (automatic switching) ・ Available frequency fluctuation rated frequency ± 2Hz (operation guarantee), ± 1Hz (performance guarantee)	・ 100 ~ 120V AC and 200 ~ 240V AC ・ The 100V system and the 200V system are shared (terminal switching) ・ 90-110% of the permissive voltage fluctuation range rated voltage	2000V AC 1 minute between the power supply terminal and ground (heat dissipation fin)	1 part of the instruction manual	Phase control/minute control (switching by internal switch)	DC current 4 ~ 20mA DC, DC voltage 1 ~ 5V DC or on -off point signal (switched by terminal)	Approximately 1.9kg
PA-3100-Hz	Available upon quote	-15 ~ 55 ° C (operation guarantee), 0 to 40 ° C (performance guarantee)	Resistance load, inducing load (transformer primary side control, magnetic flux density of 1.25t or less, only phase control method)	The output gradient can be set to the input signal by the internal volume. It is also possible to attach the gradient setting device externally.	By the internal volume, the output change width can be varied for the on -off setting input signal, and detailed control is possible. It is also possible to attach the lower limit configuration externally.	By setting the soft start / soft -up and down time, it can respond to sudden changes in the load voltage, sudden changes in input signal, etc., reducing overload to the load, such as overcurrent occurrence.	100Ω (4 ~ 20mA DC), 25kΩ (1 ~ 5V DC)	500V DC 20mΩ or more between the power supply terminal and the case	0.5A (output 98%)	Surface mounting method	Soft start / soft -up -down (1 to 20 second variable), soft start when the instant stop is returned	0 to 98% of rated voltage	・ Slope setting (0 to 100%) ・ Lower setting (0 to 100%)	30-90%RH	100A	・ 50/60Hz (automatic switching) ・ Available frequency fluctuation rated frequency ± 2Hz (operation guarantee), ± 1Hz (performance guarantee)	・ 100 ~ 120V AC and 200 ~ 240V AC ・ The 100V system and the 200V system are shared (terminal switching) ・ 90-110% of the permissive voltage fluctuation range rated voltage	2000V AC 1 minute between the power supply terminal and ground (heat dissipation fin)	1 part of the instruction manual	Phase control/minute control (switching by internal switch)	DC current 4 ~ 20mA DC, DC voltage 1 ~ 5V DC or on -off point signal (switched by terminal)	Approximately 1.9kg