Standard Series Measurement Temperature Removable Moder (1 Output) SHR
Shinko Technos Co., Ltd.
About This Product
■ Functions and features
This is a converter of 1 input 1 output that inputs the temperature resistor of PT100 and JPT100 and converts the temperature signal to a DC current and a DC voltage.
■ What you can do with this converter
・ Change of temperature sensor type
・ Change of temperature range
・ Sensor correction (input value correction)
・ Normal reverse switching
・ Filter time constant setting
・ Change of input / output type from when ordering
・ Equipped with output maximum and lower limit settings
■ Standard series
Standard model. Lineup of simple products without display
■ PC settings possible
All products are equipped with a loader terminal. If you connect to a PC using a dedicated cable (separately sold), the equipment will be launched with USB bus power, so it is easy to change the settings. Dedicated setting software is available.
■ Compatible design
・ The depth has been shortened by 15mm. (Market standard ratio)
・ Removable load resistance: 1 output and 2 output, output impedance 750Ω.
・ Reception resistance can be selected with built -in and external type.
・ Heart communication devices such as two -wire sensor settings can be connected.
■ Optional
・ Multi -revolution trimmer: You can afford to adjust and fine -tuned.
・ Various coating support: Correspondence when environmental measures are required.
■ World power supply
All products are compatible with 85-264V AC. In addition, the following products have a lineup of 24V AC/DC specifications. SGI, SGS, SGD, SGM, SGT, SGR, SGP, SGL, SGL, SGB, SGC
■ Close mounting
All products can be adhered.
* There are other model numbers
-
Product
Standard Series Measurement Temperature Removable Moder (1 Output) SHR
-
Handling Company
Shinko Technos Co., Ltd.
10 Models of Standard Series Measurement Temperature Removable Moder (1 Output) SHR
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Available voltage range | External dimensions | Influence of tolerance resistance | Insulation resistance | Material case | Material panel | Mounting method | Power-supply voltage | Response time | Save temperature range | Span adjustment range | Standard accuracy (at 25 ℃) | Temperature coefficient | Used temperature / humidity range | Withstand voltage | Zero adjustment range | accessories | input | mass | power consumption |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SHR-P01-0-0 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P01-0-1 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P01-0-2 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P01-0-3 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P02-0-0 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P02-0-1 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P02-0-2 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P02-0-3 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P03-0-0 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
|
|
SHR-P03-0-1 |
Available upon quote | 85 ~ 264V AC | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) | Less than 20Ω per line: reference accuracy, 20Ω or more per line: reference accuracy + 0.005%/ω | 500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | 95-105% (adjusted from the front) | ± 0.1%or ± 0.3 ℃ of each input span | ± 0.015%/℃ (0 to 10 mV output: ± 0.02%/℃) | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | -5 ~ 5% (adjusted from the front) | Input / output sticker (white background), 8P socket, simple version instruction manual | PT100, JPT100 input detection current: about 200 μA, allowable induction resistance: 200Ω or less per line | Approximately 76g (without socket) | Approximately 9va |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan
- Since 1945
- 185 employees