Digital temperature instruction adjustment ACN-200
Shinko Technos Co., Ltd.
About This Product
It is a digital temperature instruction adjustment meter that can be set like an analog with a large knob. You can easily set it even if the button is difficult to press with gloves.
・ 3 digits LED display
・ Large knob
■ Analog settings with potenthameter
Inherit the operability of the ACN-100 series. You can easily set and change with analog settings with potenthaometer.
■ Auto reset function
ACN-220 (PD operation) has an auto reset function.
■ Control operation can be changed with the switch
Control operation: PD operation and ON/OFF operation can be selected by dip switch.
■ Warning output
With a deviation setting for SV (excluding absolute values warning), if the PV exceeds that range, the alarm output becomes ON or OFF (up lower or lower range warning). If the alarm function is specified, there is no operation, there is no operation, the upper limit warning, waiting on the upper limit warning, the lower limit warning, the upper and lower limit warnings, the waiting upwards, the lower limit warning, the absolute price maximum warning, the absolute lower limit warning. You can select one from the inside with a dip switch.
* There are other model numbers
-
Product
Digital temperature instruction adjustment ACN-200
-
Handling Company
Shinko Technos Co., Ltd.
10 Models of Digital temperature instruction adjustment ACN-200
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Attached function | Control action | Control operation ON/OFF Operation | Control operation differentiation time (d) | Control operation proportional belt (p) | Control operation proportional cycle | Control output non -contact voltage (for SSR drive) | Control output relay contact 1C | External dimensions | Input measurement temperature resistor | Input sampling cycle | Input thermoelectric dating | Instruction Organization Operation Light | Instruction Organization PV Display Current value display) | Instruction accuracy | Material | Mounting method | Potentiometer | Power-supply voltage | Rated scale range thermal electric vs. EJ input (decomposed ability 1 ℃) | Rated scale range thermal electric vs. EK input (decomposed ability 1 ℃) | Rated scale scale Temperature resistant RPT100 input (decomposed ability 1 ℃) | SV settings | Setting accuracy | Tolerance fluctuation range | Warning output movement loves | Warning output operation | Warning output setting accuracy | color | function key |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ACN-210-R/E |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | - |
・ Control capacity: 5A 250V AC (resistance load), 2A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
96 x 96 x 120mm (horizontal x vertical x depth) | - | 250ms |
・ K, J ・ External resistance 100Ω or less |
ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | - | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | - | - | - | Dark gray | RESET key Execute auto-reset |
|
|
ACN-210-R/R |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | - |
・ Control capacity: 5A 250V AC (resistance load), 2A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
96 x 96 x 120mm (horizontal x vertical x depth) |
・ PT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
250ms | - | ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | - | - | 0 ~ 100 ℃ Setting value 1 scale: 1 ℃ | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | - | - | - | Dark gray | - |
|
|
ACN-210-S/E |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | 12V DC15% up to 40mA DC (with short circuit protection circuit) | - | 96 x 96 x 120mm (horizontal x vertical x depth) | - | 250ms |
・ K, J ・ External resistance 100Ω or less |
ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | - | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | - | - | - | Dark gray | - |
|
|
ACN-210-S/R |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | 12V DC15% up to 40mA DC (with short circuit protection circuit) | - | 96 x 96 x 120mm (horizontal x vertical x depth) |
・ PT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
250ms | - | ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | - | - | 0 ~ 100 ℃ Setting value 1 scale: 1 ℃ | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | - | - | - | Dark gray | - |
|
|
ACN-211-R/E |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | - |
・ Control capacity: 5A 250V AC (resistance load), 2A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
96 x 96 x 120mm (horizontal x vertical x depth) | - | 250ms |
・ K, J ・ External resistance 100Ω or less |
ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | - | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | 1 ° C | ON/OFF operation | Same as control performance setting accuracy | Dark gray | - |
|
|
ACN-211-R/R |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | - |
・ Control capacity: 5A 250V AC (resistance load), 2A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
96 x 96 x 120mm (horizontal x vertical x depth) |
・ PT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
250ms | - | ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF | ・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) | Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | - | - | 0 ~ 100 ℃ Setting value 1 scale: 1 ℃ | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | 1 ° C | ON/OFF operation | Same as control performance setting accuracy | Dark gray | - |
|
|
ACN-211-S/E |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | 12V DC15% up to 40mA DC (with short circuit protection circuit) | - | 96 x 96 x 120mm (horizontal x vertical x depth) | - | 250ms |
・ K, J ・ External resistance 100Ω or less |
ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | - | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | 1 ° C | ON/OFF operation | Same as control performance setting accuracy | Dark gray | - |
|
|
ACN-211-S/R |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | ON/OFF operation (dip switch No.1: ON) | 0.6% of each input span | - | - | - | 12V DC15% up to 40mA DC (with short circuit protection circuit) | - | 96 x 96 x 120mm (horizontal x vertical x depth) |
・ PT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
250ms | - | ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | - | - | 0 ~ 100 ℃ Setting value 1 scale: 1 ℃ | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | 1 ° C | ON/OFF operation | Same as control performance setting accuracy | Dark gray | - |
|
|
ACN-221-R/E |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | PD operation (dip switch No.1: OFF) | - | 50 seconds | 2.5% of each input span | Relay contact output: 30 seconds | - |
・ Control capacity: 5A 250V AC (resistance load), 2A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
96 x 96 x 120mm (horizontal x vertical x depth) | - | 250ms |
・ K, J ・ External resistance 100Ω or less |
ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | 0 ~ 400 ℃ Settings 1 scale: 5 ℃ | - | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | 1 ° C | ON/OFF operation | Same as control performance setting accuracy | Dark gray | Execute the reset key auto reset |
|
|
ACN-221-R/R |
Available upon quote | Power outage countermeasures, self -diagnosis, automatic cold contact temperature compensation, burnout, input abnormality, warm -up display | PD operation (dip switch No.1: OFF) | - | 50 seconds | 2.5% of each input span | Relay contact output: 30 seconds | - |
・ Control capacity: 5A 250V AC (resistance load), 2A 250V AC (induced load COSφ = 0.4) ・ Electrical life: 100,000 times |
96 x 96 x 120mm (horizontal x vertical x depth) |
・ PT100 3 conductor type ・ Removable value per tolerable input wire resistance 10Ω or less |
250ms | - | ON indicator (green): Control output ON turn/OFF display light (red): Control output OFF |
・ 7 -segment red LED display 3 digits ・ Character dimensions 10.4 x 4.9mm (height x width) |
Within 0.5%1 digit of each input span | Case: Polycarbonate resin | Control board embedded system | SV setting scale length 121mm (angle 240 degrees) | 100 ~ 240V AC 50/60Hz | - | - | 0 ~ 100 ℃ Setting value 1 scale: 1 ℃ | Analog settings with potenthameter | ± 1.0% of each input span | 85 ~ 264V AC | 1 ° C | ON/OFF operation | Same as control performance setting accuracy | Dark gray | Execute the reset key auto reset |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan
- Since 1945
- 185 employees