Link series multi -pulse converter (1 output) SGFL
Shinko Technos Co., Ltd.
About This Product
■ Functions and features
A display 1 input 1 output of 1 output 1 output of open collector, voltage, contact point, pulse signal from line driver, and outputs insulated pulse signals in the set pulse. You can set pulse frequency settings and set laps with one unit.
■ What you can do with this converter
・ Frequency range settings (MHz: super slow parlor, Hz: Slow Pulse, KHz: Pulse)
・ Sunbalance function (set -row setting, pulse width setting)
・ Sensor non -connection detection
・ Normal reverse switching
・ Manual setting mode
・ Changes in frequency range from when ordering (MHz: super slow parment, Hz: slow parus, KHz: pulse)
■ Link series
Model with serial communication. Modbus RTU compliant product lineup based on multi -series basis
■ White LED
The industry's first. Equipped with white LED backlight LCD. 11 Segment display (alphanumeric character character display is possible). It is easy to check the display even on the dark board.
■ PC settings possible
All products are equipped with a loader terminal. If you connect to a PC using a dedicated cable (separately sold), the equipment will be launched with USB bus power, so it is easy to change the settings. Dedicated setting software is available.
■ Compatible design
・ The depth has been shortened by 15mm. (Market standard ratio)
・ Removable load resistance: 1 output and 2 output, output impedance 750Ω.
・ Reception resistance can be selected with built -in and external type.
・ Heart communication devices such as two -wire sensor settings can be connected.
■ Optional
・ Multi -revolution trimmer: You can afford to adjust and fine -tuned.
・ Various coating support: Correspondence when environmental measures are required.
■ World power supply
All products are compatible with 85-264V AC. In addition, the following products have a lineup of 24V AC/DC specifications. SGI, SGS, SGD, SGM, SGT, SGR, SGP, SGL, SGL, SGB, SGC
■ Close mounting
All products can be adhered.
■ Display pattern
Nine types of display patterns are available. Automatic lighting is also possible.
■ Multifunctional
Equipped with a stand -up adjustment function (manual setting mode). Equipped with display locks and display custom functions (8 digits up and down).
* There are other model numbers
-
Product
Link series multi -pulse converter (1 output) SGFL
-
Handling Company
Shinko Technos Co., Ltd.
10 Models of Link series multi -pulse converter (1 output) SGFL
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Available voltage range | Display accuracy | Entering 2 | Entering 3 | External dimensions | Input 1 | Insulation resistance | Material case | Material panel | Mounting method | Power supply for sensor | Power-supply voltage | Response time | Save temperature range | Standard accuracy (at 25 ℃) | Temperature coefficient | Used temperature / humidity range | Withstand voltage | accessories | mass | power consumption |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SGFL-F0O-0-0 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: ON hours 200Ω or less/0.8V or less, 100kΩ or more/11V or more at OFF ・ Maximum rated entry frequency: 20kHz |
- | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Detection voltage/current: about 12V/4 ma |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F0O-0-2 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: ON hours 200Ω or less/0.8V or less, 100kΩ or more/11V or more at OFF ・ Maximum rated entry frequency: 20kHz |
- | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Detection voltage/current: about 12V/4 ma |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F0P-0-0 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: ON hours 200Ω or less/0.8V or less, 100kΩ or more/11V or more at OFF ・ Maximum rated entry frequency: 20kHz |
- | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Detection voltage/current: about 12V/4 ma |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F0P-0-2 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: ON hours 200Ω or less/0.8V or less, 100kΩ or more/11V or more at OFF ・ Maximum rated entry frequency: 20kHz |
- | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Detection voltage/current: about 12V/4 ma |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F1O-0-0 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: Low Level 1V DC or less, HighT Level 2V DC or higher ・ Input impedance: 100kΩ or more |
・ Input amplitude: 2V ~ 50VP-P OFF 100kΩ or more ・ Maximum rated entry frequency: 20kHz |
22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Waving: Short shaped waves, sine waves, or similar to waveforms |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F1O-0-2 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: Low Level 1V DC or less, HighT Level 2V DC or higher ・ Input impedance: 100kΩ or more |
・ Input amplitude: 2V ~ 50VP-P OFF 100kΩ or more ・ Maximum rated entry frequency: 20kHz |
22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Waving: Short shaped waves, sine waves, or similar to waveforms |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F1P-0-0 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: Low Level 1V DC or less, HighT Level 2V DC or higher ・ Input impedance: 100kΩ or more |
・ Input amplitude: 2V ~ 50VP-P OFF 100kΩ or more ・ Maximum rated entry frequency: 20kHz |
22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Waving: Short shaped waves, sine waves, or similar to waveforms |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F1P-0-2 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit |
・ Detection level: Low Level 1V DC or less, HighT Level 2V DC or higher ・ Input impedance: 100kΩ or more |
・ Input amplitude: 2V ~ 50VP-P OFF 100kΩ or more ・ Maximum rated entry frequency: 20kHz |
22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 15kHz ・ Minimum pulse width: 5μs or more (both ON, OFF) ・ Waving: Short shaped waves, sine waves, or similar to waveforms |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | 0.5Sec or less (0 → 90%) | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F2O-0-0 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit | - | - | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 30Hz ・ Minimum pulse width: 10ms or more (both ON, OFF) ・ Operation input conditions: ON hours 200Ω or less OFF 100kΩ or more |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
|
|
SGFL-F2O-0-2 |
Available upon quote | 85 ~ 264V AC | Standard accuracy ± 1 digit | - | - | 22.5 x 89 x 70mm (horizontal x vertical x depth) (not included) |
・ Frequency range: 0.001Hz ~ 30Hz ・ Minimum pulse width: 10ms or more (both ON, OFF) ・ Operation input conditions: ON hours 200Ω or less OFF 100kΩ or more |
500V DC 100mΩ or more | Flame -retardant resin color: black | Polycarbonate | DIN rail mounting method | 12V DC ± 5%, rated current 25mA | 100 ~ 240V AC 50/60Hz | Open collector output is different depending on the load | -10 ~ 60 ° C | ± 0.1% of each input span | ± 0.015%/℃ | -10-55 ° C (but not condensation or freezing), 35-85%RH (but not condensation) | 2.0kv AC 1 minute | Input / output sticker (white background), 8P socket, CDD, simple version instruction manual | Approximately 85g (without socket) | Approximately 9va |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan
- Since 1945
- 185 employees