Product
DC voltage converter (isolator) SBVHandling Company
Shinko Technos Co., Ltd.Items marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | External dimensions | Adjustment | Ambient temperature | Available voltage range | Case | Instant power outage | Insulation resistance | Mounting method | Peripheral humidity | Power-supply voltage | Response time | Select output status | Show 1 | Show 2 | Span adjustment range | Spring plug | Standard accuracy | Temperature coefficient | Tolerant resistance | Withstand voltage | Zero adjustment range | input | isolation | mass | output | panel | power consumption | self-diagnosis |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SBV-0101-0 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | -2.5 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 4 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0101-1 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | -2.5 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 4 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0102-0 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0102-1 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0103-0 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 12ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0103-1 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 12ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0104-0 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 10ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0104-1 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 10ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0105-0 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 100Ω or more | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC voltage: 0 ~ 1V DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBV-0105-1 |
Available upon quote | W17.5 × H75 × D85mm |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 100Ω or more | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: Input range 0 ~ 100mv DC, input resistance 1mΩ, allowable signal source resistance 200Ω or less | 3-port insulation (between input-output-power supply) | Approximately 80g | DC voltage: 0 ~ 1V DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities |
Click on the part number for more information about each product