TESTO 6743 with pressure under pressure G1/2 display
Testo SE & Co. KGaA
About This Product
Testo 6743 is a converter that measures pressure dew points and remaining humidity within the range of -45 to+30 ° C TD.
In addition to two -wire 4-20mA analog output, it supports switch output by optional contact plug (alarm plug). You can record the remaining humidity in the thin film drying and adsorbed drying system. Since the display rotates 360 °, the measured value can be confirmed from any angle.
Air, compressed air, and gas are used in all areas of industry. In general, it is not good to have moisture and moisture because there is a risk of damaging the quality of the final product. Use of measurement and control technology is recommended to monitor the humidity of the entire system and prevent damage.
･ -45 ° CTD ~+30 ° CTD measurement range and with a display with a display compatible with G½-inch screws
･ Testing polymer humidity sensor with high accuracy and stable for a long period of time
･ Analog output (4-20 mA) that can be freely scaled (4-20 ma) and an optional alarm plug with a built -in switch output
It is designed to measure the trace amount of humidity contained in the compressed air or dried air. Equipped with a high -precision and stable function for a long period of time.
Testo 6743 pressure dew point converter can be measured with a maximum ± 1 k accuracy at 0 ° CTD using a polymer humidity sensor with excellent accuracy.
Scaling -friendly analog output
･ Testo 6743 converts the measured value to standardized electric signals. Therefore, the analog output (4 to 20 mA) can be scaled as needed.
Alarm plug (optional) with two switch output
･ Use the switch contact plug to achieve the maximum monitoring.
･ Testo 6743 The pressure dew point converter is a compact and easy -to -use design. In one example, the housing can rotate 350 °.
A display with an operation menu
･ The operation is convenient and you can read the measured values on site.
It can prevent deterioration of quality inside, such as a cooling dryer or a thin film dryer. If the quality of the final product is impaired in some way, it can cost a lot, so you can save a lot of money by using Testo 6743. In addition, the operation cost of the adsorpted dryer can be reduced.
If you consume a playback air based on the time interval set in advance, it will often be consumed more than necessary. By using accurate humidity -controlled chamber, you can accurately adjust the use of playback air to meet the requirements.
-
Product
TESTO 6743 with pressure under pressure G1/2 display
-
Handling Company
Testo SE & Co. KGaA
1 Models of TESTO 6743 with pressure under pressure G1/2 display
| Product Image | Part Number | Price (excluding tax) | Analog output | Analog output resolution ability | Converter body external dimension | Converter body housing | Converter body mass | EMC standard | Measurement range | Model number | Operating temperature | Output accuracy | Power consumption (no alarm plug) | Power consumption (with alarm plug) | Protection grade | Storage temperature | Temperature sensor | The uncertainty of measurement | display |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
testo 6743 |
$ 1,986.60〜 | 4-20mA (2 -wire type) | 12bit | 199.5 × 37 × 37mm (including standard plug) | Plastic, polyacryluamide | Approximately 300g | 89/336/EEC | 0 to+50 ℃ | 0555 6743 | -20 ~+70 ℃ | ± 40 μA | 21ma | 65MA | IP65 (plug, when using wires) | -40 ~+80 ° C | NTC Thermista | ± 0.5k (0 to+50 ℃) | 1 line LCD |
Customers who viewed this product also viewed
Other products of Testo SE & Co. KGaA
View more products of Testo SE & Co. KGaA
About Company Handling This Product
- Germany
- Since 1957