All Categories
History
Response Rate
100.0%
Response Time
2.6hours
Very Fast Response
Product
Electric actuator ELECTRAK® HDHandling Company
Fourty ICG Japan Co., Ltd.Categories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Type of screws | Nut type | Manual operation input (when power is turned off) | Rod rotation prevention | Dynamic brake | Location hold brake | Stroke end point protection | Motor protection | Temperature monitoring | Temperature compensation | Voltage monitoring | Electrical connection * 2 | certification | Series and power supply voltage | Screw type, maximum thrust during operation | Stroke length (1) (2) | Control option | Cable option | Rod rear adapter option | Rod front adapter option | Front and rear rod adapter hole direction | Electrical connection option | Maximum thrust (when holding) (KN (LBS)) | Maximum thrust (at operation) (FX) Kn (LBS) | Speed (no load/maximum load) mm/s (in/s) | Minimum stroke length (S) (mm) | Maximum stroke length (S) (mm) | Stroke length selection range (mm) | Used temperature range (° C (f)) | Duty cycle (25 ℃) (%) | Maximum ending amount (mm (in)) | Rod rotation torque (NM (LBS)) | Protection grade (when stopping) | Protection grade (during operation) | Salt water spray test (H) | Power supply voltage (VDC) | Power supply voltage operation range (VDC) | HD12 (power supply voltage 12VDC) | Current (when no load/maximum load) (A) | MM2 (AWG) for motors |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HD12-B017-0100EXX1AASD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
Mirin screws (M16 × 2) |
standard |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1AAMD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
Mirin screws (M16 × 2) |
90 ° rotation |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1AMSD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
Cross Hole (for 12 mm pins) |
standard |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1AMMD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
Cross Hole (for 12 mm pins) |
90 ° rotation |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1AESD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
Cross Hole (for 1/2 INCH pin) |
standard |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1AEMD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
Cross Hole (for 1/2 INCH pin) |
90 ° rotation |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1ANSD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
FORKED CROSS HOLE (for 12 mm pins) |
standard |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1ANMD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
FORKED CROSS HOLE (for 12 mm pins) |
90 ° rotation |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1AFSD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
FORKED CROSS HOLE (for 1/2 INCH pin) |
standard |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
|
|
HD12-B017-0100EXX1AFMD |
Available upon quote |
Ball screw |
Road lockball nut |
can be |
can be |
Yes * 1 |
can be |
Internal limit switch |
can be |
can be |
can be |
can be |
Cable (rose edge) |
CE |
ELECTRAK HD, 12 VDC |
Ball screws, 1.7 kn (382 LBS) |
100mm |
Electronic monitoring only |
0.3 M long cable (the end is rose end) |
Flange type (3) (4) |
FORKED CROSS HOLE (for 1/2 INCH pin) |
90 ° rotation |
Cable (rose edge) |
18 (4,050) |
2.6 (585) |
71/58 (2.8/2.28) |
100 |
1,000 |
50 |
-40-85 (-40-185) |
25 (4) |
1.2 (0.047) |
0 |
IP67 / IP69K |
IP66 |
500 |
122448 |
9-16 |
18-32 |
3/18 |
2 (14) |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
2.6hrs
![Energy-saving, high-power electro-hydraulic servo actuator Electro-hydraulic actuator [HOP series]-Okaya Seiryu Kogyo Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3005330202409141.png)
