HD12-B017-0100EXX1AFSD | Electric actuator ELECTRAK® HD
Fourty ICG Japan Co., Ltd.
Price (excluding tax)
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Cable option
Control option
Current (when no load/maximum load) (A)
Duty cycle (25 ℃) (%)
Dynamic brake
Electrical connection * 2
Electrical connection option
Front and rear rod adapter hole direction
HD12 (power supply voltage 12VDC)
Location hold brake
MM2 (AWG) for motors
Manual operation input (when power is turned off)
Maximum ending amount (mm (in))
Maximum stroke length (S) (mm)
Maximum thrust (at operation) (FX) Kn (LBS)
Maximum thrust (when holding) (KN (LBS))
Minimum stroke length (S) (mm)
Motor protection
Nut type
Power supply voltage (VDC)
Power supply voltage operation range (VDC)
Protection grade (during operation)
Protection grade (when stopping)
Rod front adapter option
Rod rear adapter option
Rod rotation prevention
Rod rotation torque (NM (LBS))
Salt water spray test (H)
Screw type, maximum thrust during operation
Series and power supply voltage
Speed (no load/maximum load) mm/s (in/s)
Stroke end point protection
Stroke length (1) (2)
Stroke length selection range (mm)
Temperature compensation
Temperature monitoring
Type of screws
Used temperature range (° C (f))
Voltage monitoring
certification
-
Part Number
HD12-B017-0100EXX1AFSD
-
Product
Electric actuator ELECTRAK® HD
-
Handling Company
Fourty ICG Japan Co., Ltd.
Electric actuator ELECTRAK® HD HD12-B017-0100EXX1AFSD's performance table
Items marked with have different values depending on the model number.
| Product Image | Price (excluding tax) | Cable option | Control option | Current (when no load/maximum load) (A) | Duty cycle (25 ℃) (%) | Dynamic brake | Electrical connection * 2 | Electrical connection option | Front and rear rod adapter hole direction | HD12 (power supply voltage 12VDC) | Location hold brake | MM2 (AWG) for motors | Manual operation input (when power is turned off) | Maximum ending amount (mm (in)) | Maximum stroke length (S) (mm) | Maximum thrust (at operation) (FX) Kn (LBS) | Maximum thrust (when holding) (KN (LBS)) | Minimum stroke length (S) (mm) | Motor protection | Nut type | Power supply voltage (VDC) | Power supply voltage operation range (VDC) | Protection grade (during operation) | Protection grade (when stopping) | Rod front adapter option | Rod rear adapter option | Rod rotation prevention | Rod rotation torque (NM (LBS)) | Salt water spray test (H) | Screw type, maximum thrust during operation | Series and power supply voltage | Speed (no load/maximum load) mm/s (in/s) | Stroke end point protection | Stroke length (1) (2) | Stroke length selection range (mm) | Temperature compensation | Temperature monitoring | Type of screws | Used temperature range (° C (f)) | Voltage monitoring | certification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 0.3 M long cable (the end is rose end) | Electronic monitoring only | 3/18 | 25 (4) | Yes * 1 | Cable (rose edge) | Cable (rose edge) | standard | 18-32 | can be | 2 (14) | can be | 1.2 (0.047) | 1,000 | 2.6 (585) | 18 (4,050) | 100 | can be | Road lockball nut | 122448 | 9-16 | IP66 | IP67 / IP69K | FORKED CROSS HOLE (for 1/2 INCH pin) | Flange type (3) (4) | can be | 0 | 500 | Ball screws, 1.7 kn (382 LBS) | ELECTRAK HD, 12 VDC | 71/58 (2.8/2.28) | Internal limit switch | 100mm | 50 | can be | can be | Ball screw | -40-85 (-40-185) | can be | CE |
There are 10 models for this product.
Customers who viewed this product also viewed
Other products of Fourty ICG Japan Co., Ltd.
View more products of Fourty ICG Japan Co., Ltd.
About Company Handling This Product
- Japan
- Since 1974
- 18,000 employees