Portable Whirlpools Inspector ELOTEST M3
Roman Japan
About This Product
■ Characteristics
･ 5.7 inch large screen
･ 2 frequency
･ Special filter for rotor
■ Main use
･ Sorting screws with different tensile strength
･ Borehole inspection in aluminum structures using a mini rotor
･ Cracking on the coarse surface using the LED sensor at the tip of the probe
･ 2 frequency steel pipe end diameter test using signal mixing
･ Manual surface crack test using curved surface sensor
･ Rotor blade surface crack detection
･ Internal crack detection of aluminum / rivet structure
･ Conductive measurement in IACS or MS/M units. Measurement range: 1 - 110 %IACS
-
Product
Portable Whirlpools Inspector ELOTEST M3
-
Handling Company
Roman Japan
1 Models of Portable Whirlpools Inspector ELOTEST M3
| Product Image | Part Number | Price (excluding tax) | 2 frequency measurement | Active probe correction | Battery | Conductive measurement measurement frequency | Conductive measurement measurement range | Conductive measurement proofreading | Conductive measurement unit | Exciting voltage current | Filter BP (Low Pass Filter) | Filter HD filter | Filter HP (low -pass filter) | Filter LP (low -pass filter) | Height x width x thick (mm) | Inspection frequency | LCD display | Main amp | Memorial thickness measurement unit | Operating environment charging temperature | Operating environment operating temperature | Operating environment storage temperature | Parameter setting / Image storage | Preamplifier | Probe connection | Semphrase thickness measurement proofreading | Slamy thickness measurement measurement frequency | Slamy thickness measurement range | Y -axis enlargement | gain | phase | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Elotest M3 |
Available upon quote |
Switching of each frequency Maximum frequency of frequency 1kHz Each frequency can be changed individually Frequency mixed function (noise reduction) |
Automatic correction of probe response signal that realizes optimal signal display Automatic setting of test frequency (optimized for probe and inspection specifications) |
Lithium -ion battery (14.8 V/1.95 AH) Up to 4 hours and a half drive Up to 3 and a half hours driven when using a rotor Battery remaining amount display function Remaining alarm (red LED flashing or alarm sound) |
60kHz or 480kHz | 1%IACS to 110%IACS | Use two different calibration test pieces | %IACS or MS/M |
0-100% (2% chopped) (100% = +/- 10 v; up to 300mA) |
0Hz to 10kHz (combination of LP and HP) |
Automatic filter for rotor Automatically displays defective signals in the center of the screen |
0Hz to 10kHz (40 steps) | 1.3Hz to 10kHz (40 levels) | 180 × 200 × 76 |
10Hz to 12MHz Continuous adjustable Crystal vibration oscillation Display in Hz, KHz, MHz units Frequency stability 50ppm |
5.7 inch large screen (120 mm x 89 mm) Long life LED backlight 320 x 240 pixels, refresh rate 75 Hz/TD> Sampling rate 220 kHz, no delay |
0 to 60 DB (0.5 DB chopped) | µm | 0 ℃ ~+40 ℃ | -20 ℃ ~+50 ℃ | -30 ℃ ~+80 ° C |
99 parameter settings can be saved Change, save, call at any time Recommended parameters for each of the 10 inspection specifications (overwrite, change, no erasure) Save 32 images. Including parameter settings Parameter settings and images can be managed with file names consisting of alphanumeric characters |
0 to 60db (0.5db chopped) (When the inspection frequency is less than 100 kHz, 0 to 40dB) |
11 -pin FiScher socket (8 -pin FiScher compatible) BNC connector (for parametric probe and resonance probe) Other companies can connect using BNC connector or various adapters |
Use two different calibration test pieces | 60kHz or 480kHz | Up to 1,000 µm or 40 mil | 0 to 20dB (1dB chopped) | Up to 140dB | 0 to 359.5 ° (0.5 ° chopped) | 1.2kg |
Customers who viewed this product also viewed
Other products of Roman Japan
View more products of Roman Japan
