■ Ethernet/IP output type
・ Linear profile shape Ethernet/IP output type GY sensor.
-A adapter device that outputs Ethernet/IP for magnet displacement and speed.
・ Measure the position and speed of up to 20 detected magnets with one sensor at the same time.
can do.
・ You can remove and replace the sensor gag from the housing.
■ Mounting bracket
Clamp: F50 (material: SUS304)
■ Features
・ Profibus DP Output: Output magnet displacement with Profibusdp (DPV0) with a maximum bore rate 12Mbps.
・ Simple setting of sensor parameters: Sensorameter (decomposition ability, output direction, etc.) can be set by customers through Profibus. If you use an separately sold Profibus Master Simulator, you can check and set the proofibus slave data from your computer instead of the Profibus master (usually PLC).
* Accuracy is applied to a sensor with an effective stroke of 300mm or more. A sensor of less than 300mm is equivalent to a 300mm sensor specification.
* 1 In the case of multi -magnet specification, the sampling frequency is different, so please contact us.
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
*Please note that we may not be able to accommodate sample requests.
Magnetic distortion -type linear sensor GY series that measures straight line displacement [Linear profile shape] <all -in -one type> Controller integrated type Gyse-EP2-PF probe's performance table
Items marked with have different values depending on the model number.
1kHz (1,300mm or less), 500Hz (2,400mm or less), 250Hz (2,401mm or more) * 1
-40 ℃ ~+90 ℃
+24VDC (± 5%) (110mA)
± 15ppmfs/℃ or less
15g (20-100Hz)
Ethernet/IP
Location: min.1μm (Multi -magnet time min.10μm)
Speed: Resolution 1um/Sec (when speed 1mm/sec or higher)
Set in Configuration Assembly at the start of communication
This is the version of our website addressed to speakers of English in
the United States.
If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.