Nakamura Manufacturing Co., Ltd.'s Vernier Calipers

■Features External and internal measurements are possible with one jaw. The jaw tip is thin, making it ideal for measuring narrow areas.

• Meters & Instruments

• Vernier Calipers

■Features Dial type direct reading caliper. Easy to read with gold-based scale plate.

• Meters & Instruments

• Vernier Calipers

■Features The thickness of the outer jaw tip is 0.8mm, making it ideal for groove measurement. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features Since it is a roller type probe, it can smoothly measure curved or circular workpieces. Equipped with a peak function that holds the maxi...

• Meters & Instruments

• Vernier Calipers

■Features Send measurement data with a single button. Compact design with built-in transmitter. The transmission completion lamp lights up on the d...

• Meters & Instruments

• Vernier Calipers

■Features Ideal for deep internal measurements. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features Ideal for deep internal measurements. It is a direct reading type.

• Meters & Instruments

• Vernier Calipers

■Features A long caliper with upward facing jaws, ideal for measuring spheres and pipes. With peak hold function, the maximum measured value can be...

• Meters & Instruments

• Vernier Calipers

■Features Ideal for measuring pipes and spheres. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features - Ideal for measuring the diameter of pipes, etc. The displayed value can be transferred to a PC. -The transmitter is built into the digi...

• Meters & Instruments

• Vernier Calipers

■Features Two types of probes are included as standard. Ideal for measuring the outside of grooves, etc. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features You can hold the measured values ​​of inside and outside measurements and check them at hand.

• Meters & Instruments

• Vernier Calipers

■Features Digital type pita caliper. The display is larger than conventional products and the numbers are easier to read.

• Meters & Instruments

• Vernier Calipers

■Features The outer jaw tip is sharp, making it ideal for measuring irregularly uneven areas. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features The cylindrical jaw is suitable for measuring the thickness of curved parts. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features Ideal for external measurements and deep blind holes that cannot be measured with normal straight jaws. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features ・Since the measuring head is located directly below, the measured value can be read from above (overhead view). ・Actual measured values...

• Meters & Instruments

• Vernier Calipers

■Features ・Offset type round hole pitch caliper ・Comes with a special gauge ・E-RM-2-15BL: G-20-4 ・E-RM-2-30BL: G-25-8 ・E-RM-2-60B: G-25-8 ・Wi...

• Meters & Instruments

• Vernier Calipers

■Features ・Round hole pitch caliper for small diameter holes ・A dedicated reference gauge G-10-3 is included. ・With external output function

• Meters & Instruments

• Vernier Calipers

■Features ・Pitch measurement between holes and hole measurement from end face can also be done with this one tool. ・Direct measurement type that ...

• Meters & Instruments

• Vernier Calipers

■Features ・Direct reading type ・The main measuring head and conical/cylindrical jaws can be replaced. ・Three measurements can be made with this ...

• Meters & Instruments

• Vernier Calipers

■Features ・Round hole pitch caliper for long lengths ・A dedicated reference gauge G-10-8 is included. ・With external output function

• Meters & Instruments

• Vernier Calipers

■Features Both the outer and inner jaws are long, making it ideal for narrow and deep measurement locations. With external output function.

• Meters & Instruments

• Vernier Calipers

■Features ・3 measurements possible with depth bar with hook ・Displayed measurement values ​​can be transferred to a PC with a single measurement ...

• Meters & Instruments

• Vernier Calipers

■Features ・Ideal for hole-to-hole pitch measurement, direct reading type ・With external output function

• Meters & Instruments

• Vernier Calipers

■Features - Calipers ideal for measuring the center pitch of holes with the same diameter. Stable measurement is possible with the conical probe. ...

• Meters & Instruments

• Vernier Calipers

■Features ・Ideal for measuring the pitch of round holes with steps ・Direct reading type

• Meters & Instruments

• Vernier Calipers

■Features ・Ideal for measuring holes from the end face, direct reading type ・With external output function

• Meters & Instruments

• Vernier Calipers

■Features Measurement in the same direction is possible. The thickness of the lower jaw tip is 0.8mm, making it ideal for groove measurement.

• Meters & Instruments

• Vernier Calipers

■Features ・Rotating scriber increases convenience ・The tip of the scriber has a super steel tip. ・Straight scriber is also included as standard.

• Meters & Instruments

• Vernier Calipers

■Features There are two types of digital long calipers: 600mm and 1,000mm.

• Meters & Instruments

• Vernier Calipers

■Features ・Ideal for positioning machines, linear motion equipment, etc. - Equipped with an external output function, allowing you to build statis...

• Meters & Instruments

• Vernier Calipers

■Features Ideal for measuring dimensions during groove machining for flanges. Conforms to JPI standards.

• Meters & Instruments

• Vernier Calipers

■Features Caliper for measuring flange grooves. JPI standard, 4 probes included.

• Meters & Instruments

• Vernier Calipers

■Features Ideal for measuring deep inner diameters. There are two types of jaw length: 56mm and 76mm.

• Meters & Instruments

• Vernier Calipers

■Features Ideal for measuring spheres and pipes.

• Meters & Instruments

• Vernier Calipers

■Features Long type standard caliper with JIS mark.

• Meters & Instruments

• Vernier Calipers

■Features End face measurements, height measurements, and inside measurements that were not possible with conventional products are possible.

• Meters & Instruments

• Vernier Calipers

■Features ULJ judgment function + measurement between round hole pitches is also possible. The probe can be removed at any time.

• Meters & Instruments

• Vernier Calipers

■Features Ideal for measuring workpieces that cannot be measured with a straight one, such as deep in a blind hole.

• Meters & Instruments

• Vernier Calipers

■Features ・Ideal for measuring the pitch of round holes with steps. ・The measuring head on the main scale side is removable, and it is also possi...

• Meters & Instruments

• Vernier Calipers

■Features ・Round hole pitch caliper for small diameter holes ・Pitch measurement of round holes and measurement of holes from the end surface are ...

• Meters & Instruments

• Vernier Calipers

■Features Two types of measurement possible with one tool: pitch measurement of holes with equal diameter, and measurement from the end face to the...

• Meters & Instruments

• Vernier Calipers

■Features The outer and inner jaws are longer than the standard model, making it ideal for narrow and deep measurement locations.

• Meters & Instruments

• Vernier Calipers

■Features The short jaw makes it suitable for measuring deep holes with no height.

• Meters & Instruments

• Vernier Calipers

■Features External and internal measurements are possible with one jaw. SCM long jaw type.

• Meters & Instruments

• Vernier Calipers

■Features ・Height gauge with crank-shaped scriber ・The tip of the scriber has a super steel tip. ・Easy reading with magnifying lens included as ...

• Meters & Instruments

• Vernier Calipers

■Features ・Height gauge with straight scriber ・The tip of the scriber has a super steel tip. - Easily read with a magnifying lens

• Meters & Instruments

• Vernier Calipers

■Features Standard long calipers from 70mm pocket size to 1,500, 2,000, 2,500, 3,000, and 4,000 (mm).

• Meters & Instruments

• Vernier Calipers

■Features By setting the upper and lower limit values ​​and applying it to the workpiece, you can instantly make an OK or NG judgment. Ideal for in...

• Meters & Instruments

• Vernier Calipers