All Categories
History
This section provides an overview for electrode strips as well as their applications and principles. Also, please take a look at the list of 3 electrode strip manufacturers and their company rankings. Here are the top-ranked electrode strip companies as of April, 2025: 1.Jlab Export, 2.Eisco Labs, 3.Omron.
Table of Contents
An Electrode Strip is a set of devices that detects the water level in a container containing liquid, such as a water tank. It works in the same way as electrode rods used to detect the water level in receiving water tanks on the roofs of buildings.
Electrode Strips are made of an air-resistant stainless steel stranded wire coated with PVC and a metal fitting for detection.
Splits are attached with screws that bite into the wires of the Electrode Strip, allowing the liquid to pass through and conduct electricity between the split that is flooded and the common split that is attached at the deepest point, which corresponds exactly to the tip of the electrode rod.
Electrode Strips are used to monitor the water level in receiving tanks and drainage tanks installed in places where large amounts of water are used and drained, such as office buildings, condominiums, and hotels where many people are working.
It is effective in drainage layers where problems caused by suspended solids, which are considered unsuitable for electrode rods, are likely to occur, and in tanks that are prone to short circuits due to the distance to the liquid level.
The detected signal is used to maintain an appropriate amount of water in the receiving tank, and in the drainage layer, it is used to control the transfer to the treatment tank, which adjusts the water quality to a level that allows it to be discharged into rivers and seas.
Electrode Strips are usually made up of three wires and three split pins, corresponding to the short, medium, and long electrode rods, and function in the same way as full water, drought, and common tips. Split screws bite into the wire coating, establishing contact and exposing the wire at that point, creating an electrical state similar to that of the tip of the electrode rod.
When the amount of water in the Electrode Strip decreases beyond the water level at the low water level point, the control equipment determines that the water level is low by opening the line that was previously short-circuited.
On the other hand, if the water volume rises to a high water level point, the control equipment determines that the tank is full to prevent the liquid from overflowing, and a full water alarm is issued and other actions are taken. The basic configuration of the electrode band is the same as the electrode rod, with full water and low water, but it is also possible to install another point splitting sill to eliminate the float used for replenishment pump control.
Alternatively, if the tank is deep enough to increase the distance between the high and low electrode strips, it may be necessary to add additional points in addition to the high and low electrode strips, since the conduction with the common is likely to be unstable.
*Including some distributors, etc.
Sort by Features
Sort by Area
Eisco Labs, established in 1968 and headquartered in New York, USA, operates as a manufacturer of science supplies, catering to both industrial and academic research laboratories. The company offers an array of products, such as tech-cut rocks & minerals, safety-pack labglass, high-performance micropipettes, performance plastic wash bottles, NextGen Bunsen burners, and other laboratory supplies. It also provides glassware, plasticware, equipment, instruments, and lab supplies to various industries. The company's products adhere to various standards, including ISO, ASTM, CE, and CSA, among others.
Jlab Export is a manufacturer of a vast array of laboratory equipment, formed in 1980 and situated in Ambala, India. The company provides geography lab models, laboratory apparatus, electrochemistry instruments, and pharmacology instruments. It also crafts metallurgical equipment, heat transfer lab equipment, fluid mechanics and hydraulics lab equipment, and medical anatomy instruments for its customers. It is ISO 9001, ISO 14001, CE, WHO-GMP, and ISO 13485-2003 certified, implying it is able to deliver quality products
Omron Corporation, started in 1933 and headquartered in Kyoto, Japan, is a manufacturer of automation components, equipment, and systems, and it developed the first contactless proximity switch in 1960. It has four domains, including industrial automation, electronic components, healthcare, and social systems, and it provides products and services in around 120 countries and regions. Some of its products include microsensing devices, access control systems, industrial robots, surveillance cameras, and blood pressure monitors. In 1971, it developed the first online cash machine, and in 1972, it established Japan’s first welfare factory.
Ranking as of April 2025
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Jlab Export |
33.3%
|
| 2 | Eisco Labs |
33.3%
|
| 3 | Omron |
33.3%
|
Derivation Method
The ranking is calculated based on the click share within the electrode strip page as of April 2025. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
1 | 50.0% |
|
India
|
1 | 50.0% |
53 products found
53 products
NA Co., Ltd.
220+ people viewing
Last viewed: 4 hours ago
■Features ・Everything from the wetted parts to the lead wires is rated at 200℃. ・Designed so that the operating position does not easily change e...
JEL SYSTEM CO,LTD.
200+ people viewing
Last viewed: 19 hours ago
This is a float switch that can also perform multi-point detection using a reed switch. A liquid level sensor that can be used for a variety of liq...
Tanji Corporation
660+ people viewing
Last viewed: 5 hours ago
■ Characteristics ･ Hearing almost no influence on the adhesion to the electrodes ･ The output status and sensitivity adjustment can be adjusted by...
3 models listed
Matsushima Measure Tech Co., Ltd.
640+ people viewing
Last viewed: 31 minutes ago
■Features An electrode level switch is a level sensor for detecting the level of liquid. When the electrode comes into contact with liquid, the cir...
2 models listed
Yagyu Shokai Co., Ltd.
120+ people viewing
■Features ・Can be switched between forward and reverse operation. ・When the water level drops below the setting, the power to the connected devic...
Irie Co., Ltd.
200+ people viewing
Last viewed: 19 hours ago
■Multi-point detection possible with one unit, low cost, easy to adjust contact position on site Sanitary specification electrode level switch ・Me...
Irie Co., Ltd.
160+ people viewing
Last viewed: 5 hours ago
■One unit with multi-point detection, low cost, and high durability, electrode type level switch that can be used outdoors ・Measurement target: Co...
Sakuragawa Pump Manufacturing Co., Ltd.
110+ people viewing
Last viewed: 14 hours ago
Automatic operation is easily possible just by connecting to the power plug. Operating water level and stop water level can be easily adjusted. Flo...
Cem Corporation Co., Ltd.
410+ people viewing
Last viewed: 14 hours ago
This is a friction type level switch. It is stain resistant and easy to manage. ■Features ・Float cable length maximum 10m. ・We also sell connect...
NA Co., Ltd.
180+ people viewing
Last viewed: 4 hours ago
■Features ・Ideal for oil level detection ・Since the shape is small, installation space can be reduced. ・No need for switch drive power supply ・...
Japan Micro Co., Ltd.
160+ people viewing
Last viewed: 22 hours ago
The foam is sweat and chemical resistant and can be firmly fixed. Non-woven fabrics have excellent breathability and elasticity. Ox-ray transparent...
