21 Compression Terminal Lug Manufacturers in 2024
This section provides an overview for compression terminal lugs as well as their applications and principles. Also, please take a look at the list of 21 compression terminal lug manufacturers and their company rankings. Here are the top-ranked compression terminal lug companies as of April, 2024: 1.ASK Products, Inc, 2.Richards Manufacturing Co., 3.Specialized Products Company.
Table of Contents
What Is a Compression Terminal Lug?
A compression terminal lug is a terminal lug attached to the end of a wire using a special tool, and is used to electrically connect a wire to a terminal block, etc
Crimp terminals are similar to compression terminal lugs. Both are used because they can connect wire to terminal block without soldering, thus eliminating the need for soldering skills, and also because they are relatively easy to remove compared to soldering.
Compression terminal lugs come in a variety of shapes and sizes, depending on the thickness of the wire to be connected and the terminal block to which they are connected.
Uses for Compression Terminal Lugs
Compression terminals, like crimp terminals, are used to secure wires to terminal lugs or to firmly connect wires to each other. In both cases, they are used to ensure that the wires are securely joined so that they will not come loose.
Terminals are connected using a tool called a compression terminal lug. If the wrong tool is used, the proper compression force will not be applied and the compression terminal lug and wire will only be imperfectly connected.
Note that an incomplete connection may result in the wire disconnecting due to an unforeseen accident such as the wire being pulled.
Principle of Compression Terminal Lugs
In the case of crimp terminals, a part of the vinyl coating is removed from the tip of the wire, which is then threaded through a hole provided in the crimp terminal, and connected to the wire by applying force to one point on the crimp terminal where the wire is inserted using a special metal fitting.
On the other hand, in the case of compression terminal lugs, the tip of the wire, which has been stripped of its coating, is inserted into the hole provided in the compression terminal lug, but force is applied not to a single point of the compression terminal lug in which the wire is inserted, but to the entire wire insertion area to connect the two.
Therefore, the compression terminal lug has a stronger bonding force between the wire and the terminal lug than the crimp terminal lug.
Unlike joining wires by heating, such as soldering or welding, joining wires by compression does not affect the environment. Furthermore, mechanical bonding is resistant to deterioration and is stronger than bonding with insulation tape or other external factors such as wire tension.
When a wire is compressed, the sheath must be properly stripped. If the portion of the wire where the sheath is stripped is short compared to the compressed portion, the compression will be incomplete, and the wire may come loose. Conversely, if too much of the sheath is stripped off, it may cause leakage or fire.
List of 21 Compression Terminal Lug Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- India
- Italy
- Japan
-
-
-
Molex, LLC
Battery Cable Lugs
Manufacturer Overview
Molex was founded in 1938 with the invention of Molex in 1938 and today is headquartered in Lisle, Illinois, and a subsidiary of Koch Industries. In the 1950s, the company invented the Molex connector which became the standard for power connections in personal computers for decades. Today the company is a manufacturer of electronic and fiber optic connectivity systems for customers in industries such as automotive, consumer electronics, healthcare, manufacturing, and telecom infrastructure. The company has several product categories including Connectors, Optical Solutions, Capillary Tubing & Micro Components, and Automation.
-
-
-
-
-
Ilsco
COMPRESSION TERMINALS
Manufacturer Overview
Ilsco, founded in the United States in 1894, is a manufacturer of power and grounding connectors and accessories. The company's product portfolio includes a wide range of power connectors, including high-voltage connectors, industrial plugs, and data center connectors, and grounding accessories encompass a variety of products, such as grounding bars, clamps, and conductors. Its products are used in manufacturing industries where reliable power distribution and grounding are imperative and connecting and grounding systems in the renewable energy sector.
-
-
-
-
-
Panduit
Compression Lugs
Manufacturer Overview
PANDUIT was founded by Jack E. Caveney and opened the door for its clients in 1955. The company is specialized in developing advanced physical electrical and network infrastructure solutions such as data centers, office facilities, processing lines, audio video systems, etc., across different markets. PANDUIT designs builds, and installs advanced software and solutions for their clients. Hence, they have been granted 2000 Patents. The company has a labor force of 5000 employees.
-
-
-
-
Manufacturer Overview
3M Company was founded in 1902 and is headquartered in St. Paul, Minnesota. 3M provides diversified technology services globally. 3M operates through four segments: Safety and Industrial, Transportation and Electronics, Health Care, and Consumer. The Safety and Industrial segment offerings include industrial abrasives, masking, and natural and color-coated mineral granules for shingles. The Transportation and Electronics segment offerings include ceramic solutions, light management films, and electronics assembly solutions. The Healthcare segment offerings include wound care, dentistry and orthodontia solutions, and filtration and purification systems. The Consumer segment offerings include consumer bandages, picture hanging, and stationery products.
-
-
-
-
-
QUICKCABLE
Terminals Lug
Company Overview
QuickCable Corporation, established in 1946 and headquartered in Wisconsin, America, is a manufacturer and distributor of electrical connectors, cables, cable assemblies, wires, and tools. The company's product portfolio includes cable assemblies, fuses and power distribution, cable management and heat shrink, solderless terminals, and industrial connectors, among others. These products serve different industries such as construction, commercial vehicles, agricultural, material handling and various other commercial and industrial applications. QuickCable Corporation is a privately-held, ISO 9001:2015 certified company that produces, and stocks its products in North America and distributes them globally.
-
-
-
-
-
NSI
Compression
Company Overview
NSI, established in 1975 and based in Huntersville, North Carolina, USA, serves as a manufacturer and supplier of electrical, building technology, and HVAC products. The company, through acquisitions like Bridgeport Fittings, Polaris, TORK, and WarriorWrap, utilizes various brand technologies to meet customer demands in sectors requiring efficient wire management, electrical circuit connectivity, system control, and proficient electrical installations and repairs. Its diverse offerings include electrical connectors, fittings, controls, and fasteners.
-
-
-
-
-
Penn Union
Compression Terminal Lug
Company Overview
Penn Union is a Edinboro, Pennsylvania, USA-based manufacturer and supplier of electrical, mechanical, and compression connectors founded in 1928. The company’s product portfolio is segmented into compression, terminal blocks, grounding, power distribution blocks, overhead & underground utility connectors used in construction, power transmission, rail & transportation, telecom, and utility markets. The compression connectors segment includes terminal plugs, splices, quick disconnect terminals, pigtail connectors, and C-Taps & H-Taps. They also offer various tools, dies, and accessories such as compression tools, hydraulic pumps, and cable cutters.
-
-
-
-
-
Richards Manufacturing Co.
Copper Compression Lugs
Company Overview
Richards Manufacturing Co. is a manufacturer and supplier of electrical and gas distribution equipment for utility and industrial markets located in Irvington, New Jersey, USA and was established in 1945. The company offers a range of products, such as connectors, medium voltage pre-molded items, natural gas meter accessories, network protectors, relays, and network communications. It serves the energy distribution with quality, dependability, and outstanding customer service. The company also provides customized solutions for underground network distribution systems.
-
-
-
-
-
-
-
-
-
Cembre S.p.A.
Terminal Lug
Manufacturer Overview
Cembre Inc. is headquartered in Edison, New Jersey, since 1999, as a manufacturer and supplier of electrical components. The company produces pre-insulated and uninsulated electrical connectors that have uses in the switchgear and electrical panels. They also manufacture crimping and cutting tools for cables along with railroad products such as electrical connections and machinery for the maintenance of railway tracks. Identification and labeling system such as thermal printers are also part of the production. Cembre offers solutions to numerous industries such as Power production, Transport, and Electric Systems along with Railway and Industrial Applications.
-
-
-
-
-
NICHIFU TERMINAL INDUSTRIES CO., LTD./NICHIFU CO., LTD.
Compression Terminal Lug
Manufacturer Overview
NICHIFU TERMINAL INDUSTRIES CO., LTD./NICHIFU CO., LTD., established in, Japan, in 1941 is a manufacturer of electrical products. Their products range include solderless terminals, indoor electrical wiring, connectors and power line connection that are produced with the accordance of Japanese Industrial Standards. In 1967 the company opened new factory and head office in Tsurumi, Osaka for rationalized production and development of new products and they have distributions and service all around the world.
-
-
-
-
-
Greaves Corporation
TERMINAL LUGS
Manufacturer Overview
Greaves Corporation, headquartered in Centerbrook, Connecticut, has been supplying electrical connectors to the electrical construction industries since 1947. A full-line supplier, Greaves has an inventory of over 4,000 different items. The company has facilities and manufacturing capabilities to produce mechanical lugs and splices, compression lugs and splices and adapters, and numerous types of grounding clamps. Greaves has a variety of in-house metalworking and machining processes, as well as an extensive stock of raw materials and finished products, allowing it to quickly supply both standard and special products. Its capabilities include designing custom products and modifying standard products for specific applications.
-
-
-
-
-
ABB E-mobility
Compression lugs
Manufacturer Overview
ABB E-mobility provides electric vehicle charging solutions for customers around the globe. ABB E-mobility offers DC fast chargers as well as AC chargers with focus on reliability and uptime. Since 2010, ABB E-mobility has sold over 50,000 DC fast chargers and over 1 million total AC chargers. ABB E-mobility offers home single and multi-charge units, retail, workplace, and hospitality charge units, electric vehicle fleet sales, as well as public transportation. Additionally, numerous digital solutions and software services are available.
-
-
-
-
-
Hubbell. All Rights Reserved
Compression Terminal
Manufacturer Overview
Hubbell, incorporated in the late 1800's, and based in Shelton, Connecticut, USA, is a manufacturer of electrical and electronic products. Its comprehensive product range covers standard and specialized wiring devices, rough-in electrical products, connectors, grounding solutions, lighting fixtures, and various electrical equipment for use in industrial, commercial, and institutional facilities. These products find application in diverse settings, from controlled data centers to power grids. The company's products address business challenges, improve energy efficiency, enhance safety, withstand harsh environments, and enable easier management of wiring and grounding systems around buildings.
-
-
-
-
-
Amiable Impex
Cable Lugs & Terminals
Manufacturer Overview
Amiable Impex Cal-Royal Products, Inc. founded in Commerce, California, USA, in 1983, is a manufacturer of security door hardware and exit devices. The company offers products including door closers, exit devices, electric strikes, locksets, and hinges. Design of its Clutch System (Genesys, Grade 1) for lever locks neutralizes damage to levers from misuse or vandalism. The company’s exit devices are used to unlock doors in emergency situations. It serves federal courthouses, commercial buildings, hospitals, military bases, and retail stores.
-
-
-
-
-
Bhuwal Insulation Cable Pvt Ltd
Copper Lugs
Company Overview
Bhuwal Insulation Cable Pvt Ltd is a manufacturer and supplier of exquisite range of wires and cables. The company was established in 2005 and is based in Southern USA. The company range of products includes High Temperature Cables, Silicon Cable with Fibreglass Braiding, HT Cables, Fibreglass Braided Cables, EPR/PCP Rubber Cables, PTFE Insulated Cables, Teflon Wires, Silicon Cables, Silicon Rubber Insulated Cables and Fiber Glass Cables. The company have a manufacturing unit equipped with sophisticated technologies and are authorized by efficient work-force that has helped a lot to provide complete satisfaction to our clients
-
-
-
-
-
-
-
-
-
-
-
Zhejiang Keyi Electric Group Co.,Ltd.
Bimetal Cable Lugs
-
-
Compression Terminal Lug Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | ASK Products, Inc |
8.7%
|
| 2 | Richards Manufacturing Co. |
7.1%
|
| 3 | Specialized Products Company |
6.3%
|
| 4 | QUICKCABLE |
6.3%
|
| 5 | Greaves Corporation |
6.3%
|
| 6 | Amiable Impex |
5.6%
|
| 7 | Ilsco |
5.6%
|
| 8 | ABB E-mobility |
5.6%
|
| 9 | 3M |
5.6%
|
| 10 | MG ELECTRICA |
4.8%
|
Derivation Method
The ranking is calculated based on the click share within the compression terminal lug page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
- MG ELECTRICA: 2006 (18 years ago)
- Pioneer Power International: 2001 (23 years ago)
- HEX - Brass Copper Alloy ( I ) Ltd: 1991 (33 years ago)
Company with a History
- NICHIFU TERMINAL INDUSTRIES CO., LTD./NICHIFU CO., LTD.: 1941 (83 years ago)
- QUICKCABLE: 1946 (78 years ago)
- Panduit: 1955 (69 years ago)
Compression Terminal Lug Manufacturers in United States
*Including some distributors, etc.
- Molex, LLC
- Ilsco
- Panduit
- 3M
- QUICKCABLE
- NSI
- Penn Union
- Richards Manufacturing Co.
- ASK Products, Inc
- Specialized Products Company
Global Distribution of Compression Terminal Lug Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
10 | 66.7% |
India
|
3 | 20.0% |
Italy
|
1 | 6.7% |
Japan
|
1 | 6.7% |
