86 Thickness Gauge Manufacturers in 2024
This section provides an overview for thickness gauges as well as their applications and principles. Also, please take a look at the list of 86 thickness gauge manufacturers and their company rankings. Here are the top-ranked thickness gauge companies as of November, 2024: 1.Lumetrics, 2.Vitrek Corp., 3.TESTER SANGYO CO,. LTD.
Table of Contents
What Is a Thickness Gauge?
A thickness gauge, also known as a skimming gauge, is a tool designed to measure the size of gaps between objects that are difficult to measure with standard measuring instruments like rulers and micrometers. While calipers are generally used for measuring dimensions, thickness gauges are utilized in situations where calipers are not applicable.
These gauges are particularly useful in scenarios where the size of a gap, such as in a gasket, cannot be determined visually. A thickness gauge consists of multiple thin metal sheets of varying sizes, which are stacked to measure the gap size.
Uses of Thickness Gauges
Thickness gauges are employed to measure gaps in products where calipers and other measuring instruments fall short. The gauge measures the skimmer dimension by overlapping thin metal sheets, known as leaves, of a specific thickness. The leaves in a thickness gauge, standardized in thickness, are typically made of materials like stainless steel or carbon steel, known for their resistance to deformation and corrosion. The appropriate leaf or combination of leaves is selected for measurement based on the skimmer dimension.
Principle of Thickness Gauges
The dimension value is determined by the total thickness of the leaves, which are cleanly lubricated and smoothly inserted into the gap. To verify the accuracy, a leaf 0.01mm thicker than the total thickness is combined with the existing leaves to ensure it cannot be inserted into the skimmer. Caution is advised to avoid forcing the gauge into the gap. Leaf tip shapes come in two types: A-type with a circular tip and B-type with a pointed tip and rounded edge. Leaf thicknesses range from 0.01mm to 3.00mm, with lengths of 75mm, 100mm, or 150mm and a width of 12.7mm. These gauges are available in various leaf thickness combinations and are chosen based on specific requirements. It's crucial to ensure that the leaves are free from dirt, rust, or scratches before use.
Features of Thickness Gauges
The main feature of a thickness gauge is its ability to measure narrow spaces that cannot be gauged with calipers by overlapping precisely controlled thin plates. A common application is the clearance adjustment between engine camshafts and tappets. Although there are multiple methods for measuring this clearance, analog thickness gauges are still employed in the final check process of modern engines, proving their reliability and value.
List of 86 Thickness Gauge Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- China
- France
- Germany
- India
- Italy
- Japan
- Taiwan
- Turkey
- Ukraine
- United Kingdom
-
-
-
Rex Gauge, LLC.
Material Thickness Gauge
Manufacturer Overview
Rex Gauge Company Inc., established in 1946 and headquartered in Illinois, US, is a manufacturer that specializes in durometer hardness gauges. The company offers a range of products, including durometer models, test block kits, operating stands, O-ring hardness kits, multi-scale durometers, and more. It also offers accessories, material thickness gauges, and pocket hardness testers. The products can measure hardness on multiple durometer scales, providing adaptability for different materials. In 2005, its custom durometer SG-5000 was officially luched as a Certified Space Technology. The company serves various industries such as science & technology, manufacturing, aerospace, defense, and more.
-
-
-
-
-
Gilson Company, Inc.
Thickness Gauge
Manufacturer Overview
Gilson Company, Inc. is an American manufacturer and supplier of construction material testing equipment based in Lewis Center, Ohio. The company was established in 1939 with a primary focus on manufacturing the testing screen, a laboratory-scale screening machine, to cater to the mining and highway construction industries' requirements. Over time, Gilson has expanded its product portfolio and now offers a wide range of equipment, including ovens and furnaces, scales and balances, general laboratory testing equipment, as well as material testing equipment for aggregates, asphalt, concrete, and soils.
-
-
-
-
-
United States Ball Corp.
Thickness Gauges
Manufacturer Overview
United States Ball Corp., founded in 1996, and based La Mirada, CA, has been a manufacturer and supplier of precision balls and spherical components such as valve balls, modified balls, spherical grinding & lappings, and gage balls utilizing materials such as titanium, iron, nickel, stainless steel, and copper. The balls are used in the medical, military, aerospace, pharmaceutical, and food industries. The company is ISO 9001:2015 and AS9100D certified and offers drilling and tapping services for balls used in jewelry, decoration, protective ends, and contact elements.
-
-
-
-
-
Trinity Brand Industries, Inc.
Thickness Gauges
Manufacturer Overview
Trinity Brand Industries, founded in 1989 and located in Burr Ridge, Illinois, is a supplier of tool room specialty products to the industrial market. The company offers a full line of tool room products, which include stainless steel shim, brass shim, aluminum shim stock sheets, titanium coils, and sheets. Its products come with traceability and a Material Test Report (MTR) included with all materials. Pre-cut slotted shims, feeler gage strips, and coils are also available. Its fabrication services include laser cutting, waterjet cutting, wire EDM, and 3D industrial printing.
-
-
-
-
-
Precision Brand Products, Inc.
Thickness Gauges
Manufacturer Overview
Precision Brand Products, Inc. (PBP) is a manufacturer of various tool room maintenance products and accessories founded in 1946 and headquartered in Downers Grove, Illinois. The company is a subsidiary of Precision Steel Warehouse, Inc., and is an ISO 9001 certified global supplier of over 3,800 products including keystock, hose clamps, drill rods, and fasteners. PBP offers custom fabrication and packaging services to its clients in the marine, energy, construction, and energy sectors.
-
-
-
-
-
Power House Tool, Inc.
Thickness Gauges
Manufacturer Overview
Power House Tool, Inc., founded in 1983, is a manufacturer of turbine tools that are used to reduce downtime during an outage or turnaround. Bolt heaters, tape gauges, headset and vibrating alignment tools, impact sockets, and hex head drivers are available. Outrage turbine tools, universal pivot rings, steam turbine tools, and speed warmers are among the other tools utilized in the electronics, automotive, aerospace, manufacturing, and power industries. The company is based in Joliet, Illinois, and it specializes in stud removal. It also sells specialist tools such as wrenches with thicker gripping ends, square-body hex wrenches, and open-end wrenches.
-
-
-
-
-
Micro Quality Calibration, Inc.
Thickness Gauges
Manufacturer Overview
Micro Quality Calibration Inc MQC) was founded in 1978 as a technology-oriented calibration, repair, testing, and first article inspection facility for precision measurement test equipment. MCQ follows in strict compliance of ISO-9000 (series 1, 2, 3, and 4) specifications. MCQ offers services in calibration, inspection testing, repair, database management, and analytics. Calibration services are often provided for automotive, electrical components, aerospace, and secure communications, for which MCQ is ISO 17025 accredited.
-
-
-
-
-
Kent Machine, Inc.
Thickness Gauges
Manufacturer Overview
Kent Machine, Inc. is a Pendleton, Indiana-based manufacturer of specialized testing, inspection, and assembly equipment founded in 1988. They produce various gauges and single-station machines, as well as precision-engineered components machined from steel, plastic, and non-ferrous materials for demanding industrial applications. The company is ISO 17025:2017 certified and utilizes automatic presses, robotic welding, CNC machining, and wire EDM on its 3,200 square feet of build floor for clients in the medical, automotive, and aerospace industries. Some of Kent Machine’s client corporations include Zimmer Biomet, Honda, Caterpillar, and GE Aviation.
-
-
-
-
-
GEI International, Inc.
Thickness Gauges
Manufacturer Overview
GEI International, Inc., founded in 1961 and headquartered in East Syracuse, New York, is a manufacturer of measuring tools. The company's product line includes stainless steel rulers, metric and imperial rulers, custom-made rulers, depth gauges, wire gauges, as well as vernier calipers, magnifiers, and microscopes. Serving various industries such as manufacturing, construction, and healthcare, these tools are utilized for obtaining precise measurements, as well as for inspecting components, and conducting various analyses.
-
-
-
-
-
Fischer Technology, Inc.
Thickness Gauges
Manufacturer Overview
Fischer Technology, Inc., established in Windsor, CT in 1979 is a manufacturer of coating thickness and material testing instrumentation. Their product portfolio includes coating thickness gauges, material testing instruments such as hardness testers, adhesion testers, and gloss meters, adhesion testers, used for assessing the bond strength between coatings and substrates. The company serves markets including Electronics and Semiconductors, Marine and Offshore, Construction and Architecture and Quality Control. The company has a national distribution network and a customer support center.
-
-
-
-
-
Brunswick Instrument, LLC
Thickness Gauges
Manufacturer Overview
Brunswick Instrument LLC, located in Kiel, Wisconsin, is a manufacturer of precision dimensional measurement instruments. Their product lineup encompasses a diverse range of equipment designed for accurate measurement and evaluation purposes. This includes gear inspection equipment for measuring gears, and calibration equipments to ensure the precision of other measuring instruments. They also provide flatness measuring equipment for evaluating surface flatness. The company serves both large and small manufacturing companies across various industries that require precise measurement of dimensions in components made of materials such as metal, plastic, and glass.
-
-
-
-
-
Telemark
851 Quartz Crystal Thickness Monitor
Manufacturer Overview
Telemark, founded in 1990 in Battleground, Washington, USA, is a manufacturer of PVD (Physical Vapor Deposition) vacuum deposition equipment. The product range includes advanced machinery for thin-film coating processes such as sputtering and evaporation, E-Beam sources, UHV E-Beam sources, and sheet resistance monitors. These systems offer robust benefits, including precise and uniform coating deposition, improved material adhesion, increased durability, and enhanced optical properties of coated surfaces. These equipment find application across various industries, including semiconductor manufacturing, optical coatings, medical devices, and automotive components. It offers advanced, optimal-quality manufacturing, and expertise in vacuum deposition technology in the field of PVD coating.
-
-
-
-
-
DeFelsko Corporation
Ultrasonic Wall Thickness Gauges
Manufacturer Overview
DeFelsko Corporation is a manufacturer of coating thickness gauges and inspection instruments, located in Ogdensburg, NY, USA, and was established in 1965. The company offers a range of products, including, environmental gauges, soluble salt testers, ultrasonic wall thickness gauges, and analog & digital material hardness testers, used in various industries, including metals, fiberglass, and plastic.They continue to develop new products and technologies to meet the needs of customers. They also actively participate in several key organizations (SSPC, NACE, ASTM, ISO) to improve and promote the science of coating inspection.
-
-
-
-
-
Vitrek Corp.
Laser Thickness Gauge
Company Overview
Vitrek Corp, established in 1990 and based in Poway, California, USA, is a manufacturer and supplier of high voltage test and measurement equipment. The company's product range includes Non-Contact Measurement devices, MTI Instruments Accumeasure Capacitance Products, Portable Hand-Held Signal Simulators/Calibrators, and Semiconductor/Solar Metrology Systems. These products are designed for various testing and measurement tasks. They mainly serve the electronic, appliance, medical, aerospace, and semiconductor industries. The company's services include safety and electrical test equipment provisioning, solar and metrology system offerings, vibration/engine balancing system solutions, and high-speed data acquisition.
-
-
-
-
-
Hitachi High-Tech America, Inc.
XRF Coating Thickness Measurements
Company Overview
Hitachi High Tech was established in April 1947 and operates in 26 countries with products and services ranging from semiconductor manufacturing equipment and Medical and Biosystems to Analytical Systems and Manufacturing related equipment and solutions. A unique state-of-the-art technology company with two functions as a manufacturer and a trading company with the motto of "Tackling social issues," the Hitachi High-Tech Group aspires to be a company that pursues not only economic value, such as revenue and profit, but also provides social and environmental value by contributing to resolving social issues through its business activities, including products and services. They also provide one-stop services, such as evaluations and analysis at a global level.
-
-
-
-
-
Western Gage Corp.
Thickness Gauges
Company Overview
Western Gage Corporation is a manufacturer, supplier, and distributor of air and electronic gages since 1968 and is based in Camarillo, California. They produce dimensional air gages for internal and external diameters, custom gage design, precision components, and automated inspection systems as well as air gage readouts (analog and digital) and microprocessor-based instruments such as MilliCheck readouts with high-resolution LCD displays and Micro IIi Readout that have both bar graph and digital displays. These instruments incorporate USB & RS-232 serial outputs, and can handle up to four inputs. The equipment is ideal for high volume production environments ensuring precision and accuracy.
-
-
-
-
-
Rhopoint Americas Inc.
Thickness Gauges
Company Overview
Rhopoint Americas is an American distributor of test and quality control equipment that was established in 2018 as a North American subsidiary of the UK company Rhopoint Instruments Ltd. Based in Troy, Michigan, the company stocks a wide range of instruments for measuring surface appearance, determining liquid coating properties (e.g. viscosity), and testing packaging. These are primarily used by client manufacturers of paints and coatings, packaging products, and automotive components. Rhopoint Americas also offers onsite training and equipment calibration services for clients requiring technical assistance.
-
-
-
-
-
-
Advanced Gauging Technologies, LLC
Thickness Gauges
Distributor Overview
Advanced Gauging Technologies, LLC, founded in Plain City, Ohio in 1997, is a supplier of noncontact thickness gauges and thickness measurement systems. The company's product portfolio includes laser thickness gauges, measurement gauges, custom gauges, strip thickness gauges, and plastic sheet extrusion thickness gauges. These gauges are suitable for measuring the thickness of a wide range of materials, including metals, plastics, glass, and more. The company also provides services including product selection, installation, preventative maintenance, troubleshooting, repair, and customer service.
-
-
-
-
-
Worldwide Chuck Services, Inc.
Thickness Gauges
Distributor Overview
Worldwide Chuck Services, Inc. is based in Aurora, Ohio. Worldwide Chuck Services is a distributor of new, used, and rebuilt lathe chucks, parts, and accessories. Worldwide Chuck Services also offers service, support, and repair of old, worn lathe chucks and actuators to meet or exceed original OEM specifications. Worldwide Chuck Services has product lines in addition to chucks such as jaw force gages, micrometers, cylinders, and grease. Worldwide Chuck Services also purchases used lathe chucks.
-
-
-
-
-
Midway Industrial Supply & Systems
Thickness Gauges
Distributor Overview
Midway Industrial Supply is based in Mounds View, Minnesota. Midway specializes in supplying industrial companies such as automotive, food & beverage, chemical, medical, pulp & paper, and OEMs with paint and powder application equipment and fluid management equipment. Some of Midway’s offerings include fluid pumping, transferring, dispensing, spraying equipment for paints, resins, adhesives, sealants, solvents, lubricants, inks, chemicals, foods, and sanitary products. Midway also offers services including repair, service, consulting, training, and technical information for customers.
-
-
-
-
-
Inspection Technologies Inc
Thickness Gauges
Distributor Overview
Inspection Technologies Inc. is a supplier of non-destructive testing (NDT) equipment and systems. Formed in 1985, this California-based company offers systems, equipment, and stock supplies for multiple NDT methods including liquid penetrant, eddy current, and ultrasonic testing. Along with its range of products, the company provides training and consultation for various NDT applications, calibration to ISO 17025 and ANSI/NCSL Z540-1 standards, and repair services. Inspection Technologies Inc. serves clients in the oil and gas, aerospace, and power generation industries.
-
-
-
-
-
AMK Plastics LLC
Thickness Gauges
Distributor Overview
AMK Plastics was established in 2018 in Miami, Florida. AMK is a supplier of machines, materials, and knowledge-based services for the global plastic industry, handling both small and large products. The company’s product lineup includes large equipment such as extruders and chillers, smaller machines such as labeling machines, supplies, and raw materials. The company also offers auxiliary equipment, spare parts, and technical support. Raw materials and basic plastic products include bio-additives, master batch plastics, plastic caps, and plastic bottles.and
-
-
-
-
Manufacturer Overview
Mep Teknik is a Turkish ISO 9001:2015 certified manufacturer of painting plant systems and products that was established in 1989 in Cayirova, Kocaeli. The company produces various systems and system components for liquid or powder painting facilities. These include specialized robots, ovens for drying or curing operations, and adjustable spray guns. The company's products are mainly used by clients in the white goods, furniture, and metalworking industries. It operates internationally, with a branch office in Sofia, Bulgaria.
-
-
-
-
-
TECPEL CO.,LTD.
Coating Thickness Gauge
Manufacturer Overview
TECPEL CO.,LTD. was established in 1990 and is a manufacturer of test and measurement devices based in Xindian, New Taipei City, Taiwan. The company manufactures various devices such as digital thermometers, temperature humidity transmitters, digital pH meters, digital handheld multimeters, and light meters datalogger. The products are manufactured under the CE requirements standards. The company was awarded the Asia-Pacific e-Business Champions of the Year 2008 from Alibaba. The company participated in various exhibitions such as Taitronix Exhibition, The 9th Taipei International Instrument Exhibition, and The Automotive Electronics Show 2018.
-
-
-
-
-
PHYNIX Sensortechnik GmbH
Coating thickness gauges
Manufacturer Overview
PHYNIX Sensortechnik GmbH, established in 1999 and headquartered in Köln, Nordrhein-Westfalen, Germany, is a manufacturer of surface testing gauges and instruments. The company's products include coating thickness gauges, surface quality testing devices, and electronic probes for measuring various material thicknesses and the smoothness of surfaces. Each of its three main product lines contains various models for specific applications. These products have numerous applications, such as testing the quality of consumer vehicle paint finishes and taking measurements on magnetic and non-magnetic base materials such as iron/steel and non-ferrous metals.
-
-
-
-
-
Sonatest
Thickness Gauges
Manufacturer Overview
Sonatest, established in 1958 in Wolverton, UK, is a manufacturer of cutting-edge UT inspection equipment and ultrasonic NDT products. The company is present globally and has a clientele comprising Boeing, Airbus, Shell, Eon, and Network Rail offering tools that assist in NDT testing in harsh environments. The products consist of Ultrasonic Testing, Phased Array Flaw Detectors, WheelProbes, Scanners, and Couplants. These equipment are widely used in various industries such as aerospace, automotive, chemical, infrastructure, and manufacturing for their simplicity, reliability as well as capability. They offer service & repair, application evaluation and training associated with NDT applications, MPT and ECT uses.
-
-
-
-
-
Automation Dr. Nix GmbH & Co. KG
Coating thickness gauges
Manufacturer Overview
Automation Dr. Nix GmbH & Co. KG, established in 1968, is a German manufacturer based in Cologne. It specializes in crafting portable devices for measuring coating thickness on metal substrates, known for simplicity and high demand globally. The company meticulously produces the QNix series gauges in Germany, overseeing its complete development, production, and rigorous testing within its calibration laboratory. Each gauge comes with an accompanying test certificate, ensuring quality and durability. The company is geared towards continuous product improvement and providing great customer service.
-
-
-
-
-
ElektroPhysik
Coating thickness measurement
Manufacturer Overview
ElektroPhysik, established in 1947 and based in Cologne, Germany, is a manufacturer of precision measuring instruments for surface inspection and coating thickness measurement. The product range covers a broad array of instruments, including coating thickness gauges, gloss meters, surface roughness testers, and conductivity meters. These instruments offer premium accuracy, stability, and user-friendly operation, making them invaluable tools for quality control and assurance. The products find applications in various industries, including automotive, aerospace, electronics, and manufacturing, where precise measurement of surface properties and coating thickness is critical for ensuring product quality and performance.
-
-
-
-
-
TIME Group Inc.
Coating Thickness Gauge
Manufacturer Overview
Beijing TIME High Technology Ltd., founded in 1984 in Beijing, China, is a manufacturer of precision measuring instruments. The company manufactures Leeb hardness testers, thickness gauges, ultrasonic flaw detectors, metallurgy equipment, and roughness testers. These advanced instruments are important for obtaining robust accuracy and stability, making them indispensable tools for quality control and material testing across various industries. The Leeb hardness testers are used for assessing the hardness of metals, while their thickness gauges and roughness testers maintain quality standards. The wholly owned company of Time Group with ISO9001, ISO14001, OHSAS18001, CE, Gost Certificates, operates in 60 countries.
-
-
-
-
-
Trotec GmbH
Layer thickness
Manufacturer Overview
Trotec GmbH is a German manufacturer of air treatment and climate conditioning machines and equipment that was established in 1994 as a subsidiary of TKL GmbH. Based in Heinsberg, North Rhine-Westphalia, the company produces air conditioners and purifiers, as well as heaters, dehumidifiers, and ventilators. It also offers equipment for measuring or monitoring various air conditions, including pressure, humidity and flow. Aside from its products, Trotec GmbH also provides rental, calibration, repair, and training services to its clients in the commercial and industrial sectors.
-
-
-
-
-
Shinwa Rules Co., Ltd.
Thickness Gauge
Manufacturer Overview
Shinwa Rules Co. was founded in Niigata, Japan, in 1971. Shinwa Rules Co. develops a variety of measuring products including calipers, thermometers, hygrometers, laser optical apparatuses, and sheet heating elements. Above these, Shinwa develops metallic rulers and squares. Additionally, Shinwa operates as an OEM supplier for special calibrations and machine tools, special surface fabrication, and etching on metallic parts.
-
-
-
-
-
KÄFER MESSUHRENFABRIK GMBH & CO. KG
Stand 2.1670
Manufacturer Overview
KÄFER MESSUHRENFABRIK GMBH & CO. KG is a German manufacturer of precision measuring instruments that was established in 1932 and is headquartered in Villingen-Schwenningen, Germany. The company produces a wide range of precision measuring instruments, including dial gauges, depth micrometers, and comparators.KÄFER MESSUHRENFABRIK also produce a number of accessories including contact points, magnetic holders and stands, measuring tables bases for depth gauges. Its products are used by a number of industries, as diverse as manufacturing, machine building, and automotive industries. The company also provides a range of services, including calibration service, repair service, repair instructions, international standards certification and maintenance.
-
-
-
-
-
Shenzhen Wintact Electronics Co., Ltd.
Coating Thickness Gauge
Manufacturer Overview
Shenzhen Wintact Electronics Co., Ltd., established in 2015 and based in Guangming New District, China, is a manufacturer of high-tech testing instruments. The company produces products for temperature measurement, environment detection, and electrical tools and has instruments such as noise detection, thickness gauge and vibrometer, thermometer, environmental temperature/humidity, and air quality. All the products are catered to different customers worldwide. The company products are produced by following the quality standards internationally.
-
-
-
-
-
SONOTEC GmbH
Thickness Gauges for NDT
Manufacturer Overview
SONOTEC GmbH, established in 1991, is a German manufacturer based in Halle (Saale), Saxony-Anhalt, specializing in ultrasonic measurement technology solutions. The company offers non-invasive flow meters and air bubble detectors for fluid monitoring in medical technologies, bioprocessing, and the semiconductor industry. It also supplies ultrasonic testing devices used for condition monitoring, inspections, predictive maintenance, tightness testing, and ultrasonic leak detection. Additionally, the company engages in non-destructive testing (NDT) using ultrasound, primarily for flaw detection, thickness measurements, and weld seam testing, commonly applied in industries like aerospace, aviation, power plants, as well as other sectors including pipelines, railways, and sheet metal inspections.
-
-
-
-
-
Micrometry Instrument Limited
Coating Metal Thickness Gauge
Manufacturer Overview
Micrometry Instrument Limited founded in Shenzhen, China, in 2007, is a manufacturer of measuring instruments and testers. The company’s product catalog includes torque testers, coating metal thickness gauges, digital microscopes, and displacement sensors. Its video microscopes are used for semiconductor inspection and failure analysis. The company’s products are certified by American standards (ASTM) and German standards (DIN). It has 100 patented products. All of its products are manufactured in-house and then sold in local markets and also exported to the USA and Europe.
-
-
-
-
-
Shenzhen Jumaoyuan Science And Technology Co., Ltd
Film Coating Thickness Gauge
Manufacturer Overview
Shenzhen Jumaoyuan Science And Technology Co., Ltd., established in 2010 and headquartered in Guangdong, China, is a manufacturer of instrumental products under the brand "Benetech". The company offers a wide range of products, including infrared thermometers, anemometers, sound level meters, and more. It also offers ultrasonic thickness gauges, coating thickness gauges, vibration meters, and earth resistance testers. Its testers are used to measure the resistance of the earth or ground in electrical systems. The company has achieved CE, ROHS, and FCC Certifications. It serves various industries, including temperature measurement series, environmental detection, nondestructive testing, industrial gas detection, and more.
-
-
-
-
-
TESTER SANGYO CO,. LTD
Film Thickness Gauge
Manufacturer Overview
Tester Sangyo Co., Ltd, established in 1967 and headquartered in Saitama, Japan, is a manufacturer of material testing equipment. Their product portfolio comprises of testing equipment for various materials such as fiber, rubber, pulp and paper, and batteries. These equipments are used to analyze and measure material characteristics such as tensile strength, hardness, friction, and more. Their range of equipment includes high-speed peeling testers, moisture pervious cups, auto notching machines, and pneumatic presses. Tester Sangyo Co., Ltd ensures accurate testing to maintain product quality, performance, and safety standards in diverse sectors including automotive, aerospace, and electronics industries.
-
-
-
-
-
Biuged
Thickness
Manufacturer Overview
Biuged Instruments Co., Ltd. has been a manufacturer of Coating and Ink Testing Equipment since 1963 and is based in China. The company designs testing instruments for paint, coating and ink, calibration, and measurement services which include products to test the viscosity, original coating performance, color, gloss, and thickness paints and it also deals in application tools, ink, and printing instruments along with mixing, grinding, dispersing and milling equipment. Their product design for professional laboratories and training for quality inspectors together with their production line serve the coatings and inks industry.
-
-
-
-
-
Honesdom international HK limited
Ultrasonic Thickness Gauge
Manufacturer Overview
NDT-KITS (Honesdom International HK Limited), established in 1973, is a Hong Kong-based manufacturer of non-destructive testing (NDT) instruments that are used to evaluate materials’ non-conformity with specifications as well as surface and internal defects without causing any damages. The instruments developed include the company’s first digital ultrasonic flaw detector, which garnered recognition from the Chinese Academy of Science (CAS) and a patent from the State Intellectual Property Office (SIPO). Other instruments developed are time-of-flight diffraction (TOFD) and phased array ultrasonic testing (PAUT) flaw detectors. NDT-KITS has achieved ISO 9001:2000 certification and adheres to the CE mark and EU EN-12668 standards.
-
-
-
-
-
Hans Schmidt & Co GmbH
Thickness Gauges
Manufacturer Overview
Hans SCHMIDT & Co. GmbH is the manufacturer of tension meter manufacturer founded in 1948 and was established in USA. The company control instruments are relied on all over the world in all applications that demand supreme precision and quality in production. The company Quality Management covers the area of design, development, production, installation and maintenance of our tension meters. They are devoted to advanced industrial processes and quality assurance, contributing to enhanced efficiency and superior outcomes.
-
-
-
-
-
A&D Company, Ltd.
Ultrasonic Thickness Gage
Manufacturer Overview
A&D, founded in 1977 and headquartered in Tokyo, Japan, stands as a manufacturer and supplier of precision measurement and healthcare equipment. Catering to laboratory, industrial, and medical sectors, the company provides an array of products, including precision balances, blood pressure monitors, weighing scales, medical scales, and moisture analyzers. These instruments find application in diverse settings, aiding in accurate measurements, health monitoring, and quality control across various industries. The company has obtained ISO9001 certification and has merged with HOLON Co., Ltd. to form A&D HOLON Holdings.
-
-
-
-
-
Teclock
Thickness Gauges
Manufacturer Overview
Teclock, founded in 1950 and based in Okaya, Nagano, Japan, is a distinguished manufacturer of precision measuring instruments. Its instruments has a high dimensional accuracy with a smallest scale of 0.0005mm. Its product lineup includes dial indicators, lever testers, thickness gauges, depth gauges, and calipers. The company also offers height gauges, stands, handy durometers, and micrometers. The company also provides a Cloud-based IoT measurement solution, enabling the seamless digitization and analysis of measurement data.
-
-
-
-
-
MAYSUN Co.Ltd
Desktop Thickness Gauge
Manufacturer Overview
MAYSUN Co.Ltd was established in March 1967 and is a manufacturer company of paper and film making machines based in Fuji, Shizuoka, Japan. The company offers an extensive list of products such as slitter for paper-making, slitter for composite material, slitting machine, non-contact thickness gauge, and desktop thickness gauge. The company has received various awards from associations such as Pulp and Paper Technical Association, Japan Invention Advancement Association, and Shizuoka Prefecture Paper and Pulp Technology Association.
-
-
-
-
-
JFE Advantech Co.,Ltd.
Ultrasonic Thickness Gauge
Manufacturer Overview
JFE Advantech Co.,Ltd. was established in 1973 and is a manufacturer of water instruments and measuring devices based in Nishinomiya, Hyogo, Japan. The company produces various products such as submerged level detectors, ultrasonic pulse coherent flowmeters, optical dissolved oxygen meters, electromagnetic flow velocity meters, and comprehensive water quality meters. The products have been used in various applications including sewage treatment plants, agricultural water systems, factory drainage, hydroelectric power plant, and deep wells management. The company have been certified with ISO 9001 for the water instruments and measuring products in 1995.
-
-
-
-
Manufacturer Overview
HST, a manufacturer and supplier, established in 2002. All its machinery holds European Union CE authentication, American FDA certification, and ISO 9001 approval. Its products extend to over 120 countries, including the USA, Canada, Australia, Europe, South East Asia, and Africa. The company supplies OEM to over 20 manufacturers and specializes in equipment for material testing requirements. Its product range comprises electronic universal testing machines, hydraulic universal testing machines, impact testing machines, fatigue testing machines, and more, addressing diverse testing needs. The company offers comprehensive support services, including Area Protection, Price Support, Technical Support, and Promotion Support.
-
-
-
-
-
S.A.M.A. Italia S.r.l.
ULTRASONIC THICKNESS GAUGEs
Manufacturer Overview
S.A.M.A. Italia S.r.l., established in 1974 and headquartered in Viareggio, Italy, is a manufacturer of precision measuring and control instruments and calibration solutions. The product line includes an extensive range of options, such as flow meters, temperature sensors, pressure gauges, and calibration tools. These optimal-precision devices make it possible to precisely measure and regulate vital characteristics across an array of sectors, including petrochemical, manufacturing, automotive, and aerospace. The products' stability, accuracy, and longevity are essential to quality control and industry compliance in measuring and control solutions for organizations all over the world.
-
-
-
-
-
SCANTECH I LEGAL NOTICE
THICKNESS MEASUREMENT GAUGE
Manufacturer Overview
Scantech SAS was established in 1992 in La Motte-Servolex, France, and is a manufacturer of measuring and control systems helpful in textile and non-woven applications. It deals in laser, x-ray, microwave online measurement, visual inspection tools, and infrared. It also manufactures sensors used in the fuel cell applications, an end-to-end solution for gigafactories, and a scanner for blown film lines. The company provides an ergonomic user interface, automatic calibration, and laser triangulation. The products benefit energy, metal, extrusion, lamination, and converting industries.
-
-
-
-
-
PCE Instruments
Coating Thickness Gauge
-
-
-
-
-
Shenzhen Linshang Technology Co., Ltd.
Coating Thickness Gauges
Manufacturer Overview
Shenzhen Linshang Technology Co., Ltd., established in 2008 and headquartered in Shenzhen, China, is a manufacturer of measuring instruments. It specializes in five main categories of instruments, including solar film measurement, optical transmittance, ultraviolet measurement, gloss and coating thickness measurement, and thickness and hardness measurement. Some of its products include Solar Film Transmission Meters, Spectrum Transmission Meters, UV Energy Meters, Gloss meters, and Portable colorimeter. The company offers its products online, available through Aliexpress or Alibaba.
-
-
-
-
-
BMS Bulut Makina San. Tic. Ltd.
COATING THICKNESS METERS
Manufacturer Overview
BMS Bulut Makina San. Tic. Ltd., established in 1991 and headquartered in Kocaeli, Turkey, is a manufacturer of hardness testers and metallographic sample preparation equipment. The company’s products include universal tensile testers, impact testers, and surface roughness measuring gauges. It is known for producing portable hardness testers, coating thickness meters, and other precision instruments. Its hardness testers measure material hardness for strength assessment and quality control, while its metallographic sample preparation equipment is used for preparing samples for microscopic analysis of material structures and properties. The company’s testing instruments are used in the construction, automotive, and aerospace industries.
-
-
-
-
-
Hitachi High-Tech Analytical Science
Coating Thickness Handheld Gauges
Manufacturer Overview
Hitachi High-Tech Analytical Science, established in 1947, is a manufacturer of analytical solutions such as analyzers, handheld thickness gauges, calorimeters, mobile & stationary spectrometers, and elemental analysis products used in environmental screening, general chemicals, metal finishing, metal production, and PMI inspection. The company offers consumables and accessories such as springs for electrodes, mineral oil, x-ray warning lamp bulbs, electrode brush, tungsten electrode, and sample films. The Westford, MA, company offers customized support packages, warranties, preventative maintenance & recertification, consultation services, and rental equipment.
-
-
-
-
-
IKO International
Thickness Gauges
Manufacturer Overview
IKO International was established in 1950 and is headquartered in Himeji, Japan. As a certified ISO 9001:2015, the company is a manufacturer of needle bearings, linear motion rolling guides, and precision positioning tables. Its products are used in a wide variety of applications, including industrial machinery, robotics, and medical equipment. The company's product range includes needle bearings, linear motion rolling guides, and precision positioning tables and are used in some of the world's advanced machines. IKO International has over 6,000 employees and operates in more than 50 countries.
-
-
-
-
-
KANEKO Corporation
GAP GAUGE
Manufacturer Overview
KANEKO Corporation is headquartered in Tokyo, Japan, and is a manufacturer of measuring instruments for railway tracks and construction that was originally established in 1950 as Kaneko Keiki Seisakusyo Corporation before rebranding in 1990. The company produces equipment for track alignment, track measurement, and weather monitoring purposes. These include slab track gauges that measure slab plate incline, water level indicators with a warning system, and lateral ballast resistance analog gauges. The company also offers engineering services, personnel training, and product maintenance for customers needing additional assistance. It primarily serves clients in the transportation, railway, and environmental monitoring sectors.
-
-
-
-
-
MINO INTERNATIONAL LTD.
Digital film thickness gauge
Manufacturer Overview
MINO International Ltd, established in 1946, is a manufacturer of screen printing machines and material based in Gifu, Japan. The company's products include printing machines, dryers, stencil making machines, and peripheral devices which are used in offices, educational institutions and graphic design. It also manufactures Squeegee Blade, a poly urethane rubber that is used in printing globally. The company offers after-sale services like troubleshooting and all its factories and sales offices within Japan are ISO-9001 CERTIFIED.
-
-
-
-
-
Teledyne FLIR LLC
Thickness Gauges
Manufacturer Overview
FLIR Systems, established in 1978 and headquartered in Wilsonville, Oregon, is a manufacturer of thermal imaging cameras and sensors. Its product range includes thermal cameras and sensors for security, robotics, and more. The company offers unmanned aerial vehicles (UAVs) with thermal capabilities for search and rescue, along with software solutions for image processing, along with services such as training and maintenance complement their offerings. Its products are utilized in security, robotics, autonomous vehicles, medical devices, and firefighting, serving diverse industries.
-
-
-
-
-
DAIEI KAGAKU SEIKI MFG. CO., LTD
Thickness Gauges
Manufacturer Overview
DAIEI KAGAKU SEIKI MFG. CO. LTD, established in 1965 and headquartered in Japan, is a manufacturer of performance evaluation testers for macromolecule materials, particularly in the fiber and dye sectors. The company's product range includes fiber product quality testers, material performance evaluation testers, and fatigue resistance machines. It creates testing equipment to assess fiber durability, color fastness, and material resistance. These products cater to the fiber industry, ensuring products meet the highest quality and environmental safety standards.
-
-
-
-
-
Baker Hughes Company
Ultrasonic Thickness Gauges
Manufacturer Overview
Baker Hughes Co. (BHC) is an American service provider and manufacturer of industrial oilfield equipment that was established in 1987 following the merger of Baker International and Hughes Tool Company. Based in Houston, Texas, the company produces several categories of oilfield products including drilling equipment, pipe and subsea production systems, generators, and storage systems. It also offers process control components and actuators such as pumps, valves and regulators. BHC provides various services for oilfield and liquefied natural gas (LNG) operations, including regasification, well construction, transportation, and storage.
-
-
-
-
-
OZAKI MFG. CO., LTD
Dial Thickness Gauges
Manufacturer Overview
Ozaki Mfg. Co., Ltd., founded in 1916 with headquarters in Tokyo, Japan, is a manufacturer of precision measuring instruments and parts under the Peacock brand. The company's product line includes dial gauges, cylinder gauges, signal gauges, handheld thickness gauges, and digital linear gauges. It also offers contact points, color caps, and replacement parts. These products are used for determining the variation in the size of components, measuring the inner diameter of a hole, and comparing part size to that of the master, as well as monitoring machinery and tolerances. These instruments are primarily used by engineers in the machining and manufacturing industries.
-
-
-
-
-
Yamabun Electronics Co.,Ltd.
Thickness Gauges
Manufacturer Overview
Yamabun Electronics Co. Ltd., founded in 1971 and based in Osaka, Japan, is a manufacturer of thickness measuring systems, thickness controllers, and related equipment. The company serves the chemical, packaging, and LCD industries, and its products are used in several regions like South America, the Middle East, and ASEAN. It allows customers to send film samples and proposes the ideal thickness measuring systems. Its TOF- 4R05 contact-type desktop film and sheet thickness measuring system displays real-time measurement data on the screen. It has a measurement range of between 0.03 to 3 mm and a measurement length of 10 to 10000mm.
-
-
-
-
-
Capacitec, Inc.
Thickness Gauges
Manufacturer Overview
Capacitec, Inc. was founded in the mid-1980s and is headquartered in Ayer, Massachusetts. The company is an ISO 9001:2008-certified designer and manufacturer of non-contact capacitive displacement sensors, gap sensors, bore probes, and parallelism measurements, which include capacitive amplifiers and data acquisition systems. The company designs custom amplifiers and software for OEM applications and end-users across the aerospace, automotive, power generation, cryogenic, and semiconductor industries. The company’s devices have advantages including small capacitive sensor size, electrostatic discharge protection, internal power supplies, and ruggedness to service extreme temperatures, high radiation, and strong magnetic fields.
-
-
-
-
-
ABB E-mobility
Thickness Gauges
Manufacturer Overview
ABB E-mobility provides electric vehicle charging solutions for customers around the globe. ABB E-mobility offers DC fast chargers as well as AC chargers with focus on reliability and uptime. Since 2010, ABB E-mobility has sold over 50,000 DC fast chargers and over 1 million total AC chargers. ABB E-mobility offers home single and multi-charge units, retail, workplace, and hospitality charge units, electric vehicle fleet sales, as well as public transportation. Additionally, numerous digital solutions and software services are available.
-
-
-
-
-
Neurtek
Thickness measurement
Manufacturer Overview
Neurtek International SRL, founded in 1979, is a manufacturer headquartered in Eibar (Gipuzkoa), Spain, specializing in equipment and technical solutions for quality control. The company's offerings encompass a range of coating test equipment, which includes instruments for testing adhesion, impact resistance, skid resistance, flexibility, and test panels. The company also provides viscosity cups, along with film thickness meters designed for measuring dry and wet coatings on various substrates, including ferrous and non-ferrous materials. Furthermore, the company offers spectrophotometers, colorimeters, lighting booths, as well as laboratory equipment, including pH meters. These products serve diverse industries such as automotive, aerospace, chemicals, and research institutions.
-
-
-
-
-
Elcometer Limited
Ultrasonic Material Thickness Detection Gauges
Manufacturer Overview
Elcometer Limited, established in 1947, has a global network of facilities and is a manufacturer in the UK and the USA of inspection equipment for the coatings, concrete, and NDT industries. The company's core portfolio of products covers four divisions: Blast, spray, coating inspections, and NDT equipment. Example products include industrial and commercial spray equipment used for protective coatings to meet OEM requirements, bodyshop spray equipment, and components used primarily to provide repair and customized work to the interior and body of passenger cars, trucks, vans, and trailers by their clients, including commercial, industrial, and OEMs.
-
-
-
-
-
Modsonic Instruments Mfg. Co.Ltd.
Ultrasonic Thickness Gauges
Company Overview
Modsonic Instruments Mfg. Co.Ltd. founded in Ahmedabad, India, in 1987, is a manufacturer and distributor of portable ultrasonic testing equipment. The company’s product catalog includes ultrasonic flaw detectors, ultrasonic thickness gauges, velocity meters, and dual rail testers. Its products are ISO-9001 certified. The company has a manufacturing facility and calibration unit in an area of 32,000 square feet. It also has service stations in all major cities of India to provide calibration and repair services.
-
-
-
-
-
KARL DEUTSCH Prüf- und Messgerätebau GmbH
WALL THICKNESS GAUGES
Company Overview
KARL DEUTSCH Prüf- und Messgerätebau GmbH, established in 1949 and based in Wuppertal, Germany, is a manufacturer of equipment for non-destructive material testing. The company provides mobile testing and measuring devices, stationary testing systems, sensors and chemical crack detection equipment mainly for the metal producing and processing industry. These equipment are used by steelworks and automotive industry suppliers such as forges, foundries and ball bearings manufacturers. The company also performs test tasks such as weld seam inspection and the detection of casting cavities with ultrasound and surface crack testing on forged parts using magnetic particles and the dye penetrant method.
-
-
-
-
-
RDP Electronics Ltd
Thickness Gauges
Company Overview
RDP Group began in 1966 and is located in Wolverhampton, West Midlands in the UK, and Pottstown, Pennsylvania in the United States. RDP is a designer, manufacturer, and distributor of LVDT displacement transducers, amplifiers, load cells, and pressure sensors for use in manufacturing, power plants, and underwater applications. RDP is ISO 9001:2015 certified. RDP products include LVDT displacement transducers, amplifiers such as rail mounting amplifiers and DC-powered strain gauge transducer amplifiers, digital panel meters and multi-channel signal conditioning, and force sensors such as compression load cells and tension load cells.
-
-
-
-
-
PCE Instruments UK Ltd
Thickness Gauges
Company Overview
PCE Instruments UK Ltd., started in 199 and headquartered in Manchester, UK, is a manufacturer and supplier of test instruments, equipment, and tools for weighing, measuring, and control systems. The company offers more than 500 test equipment, including analyzers, inspection cameras, meters, detectors, and sensors, with applications in various fields like data acquisition, electrical engineering, environmental science, building inspection, and food processing. Its manufacturing and development division is ISO 9001 certified, all its test instruments, equipment, and tools are factory calibrated, and the company also provides services for custom test instrument design, installation, and maintenance.
-
-
-
-
-
Cygnus Instruments Ltd.
Ultrasonic Thickness Gauges
Company Overview
Cygnus Instruments Ltd, established in 1987, and based in Florida, USA, is a manufacturer and supplier of ultrasonic measurement equipment. Their product portfolio includes ultrasonic thickness gauges, hatch cover leak detectors, and flooded member detection systems. The products are used in various applications which include aeronautical, electrical, forensic, mechanical, civil, and medicine systems. The company offers robust ultrasonic thickness gauges with high quality and premium expertise. They also provide digital multiple echo technology for accurate measurements.
-
-
-
-
-
Matcon
Coating meters
Company Overview
Matcon B.V., founded in 1978, is a manufacturer and supplier based in Middenbeemster, the Netherlands, specializing in emergency safety equipment. The company's lineup promotes worker safety in case of accidental exposure to hazardous materials. These products include emergency and safety showers, eyebaths, and protective clothing that provides a physical barrier against chemicals, gases, and other hazards. The company serves customers across diverse industries, including chemical, oil and gas, and pharmaceutical. It also caters to other workplaces where safety regulations mandate such equipment.
-
-
-
-
-
Kett US
Coating Thickness Gauges
Company Overview
Kett US, an American company founded in 1946 and headquartered in Villa Park, California, is a manufacturer and supplier of moisture meters and organic composition analyzers. The company's product portfolio includes laboratory mixers, near-infrared composition analyzers, and moisture determination balances. These products find applications in various industries, including agriculture, construction, and the laboratory and research industry. The company provides services, including technical support and product training to ensure customers can effectively use its products.
-
-
-
-
-
BYK-Gardner
Coating Thickness Gauges
Company Overview
BYK-Gardner, established in 1873 and based in Pittsford, United States, is a manufacturer and supplier of high-tech instruments. The company manufactures medical, optical, and physical test instruments for testing the color, gloss, and physical properties of surfaces, and supplies for the paint, coatings, and plastic industries. The company's products are made in compliance with the ISO 14001 Environmental Management System and ISO 9001 Quality Management System. It also offers smart-chart software for data analysis of color spectrophotometer and performs statistical analysis to check production quality.
-
-
-
-
-
Toolsavings, LLC
Thickness Gauges
Company Overview
Toolsavings, LLC is based in Chicago, Illinois and is a supplier and distributor of industrial supplies for both individual and corporate customers. Toolsavings offers an extensive catalog spanning over 10 categories such as Cutting Tools, Toolholding, Air and Power Tools, Fasteners, and Measuring Instruments from brands such as 3M and Destaco. Cutting tools include drills, reamers, and saws. Toolholding includes boring heads, retention knobs, and sawholders. Air and Power Tools includes blow guns, grinders, and tire gages. Fasteners includes screws and pins. Measuring instruments includes calipers, microscopes, and squares.
-
-
-
-
-
Semiconsoft, Inc.
THICKNESS MEASUREMENT ON CURVED SURFACES MPROBE HC
Company Overview
Semiconsoft, Inc., established in 2001, operates as a supplier of thin-film analysis software and services for semiconductor research and production, headquartered in Southborough, Massachusetts The company's journey is to offer solutions in the field of semiconductor Research and Development. With an eye on thin-film analysis, Semiconsoft has developed TFCompanion software, introduced in 2002. The company's devotion to the semiconductor industry is evident through its specialized software and services tailored to the needs of researchers and manufacturers, contributing to advancements in semiconductor technology.
-
-
-
-
-
-
-
MICROTECH
Thickness gauges
Company Overview
MICROTECH is a Fletcher, North Carolina, United States based company Established in 1994 that specializes in the manufacturing and supply of electronic components. The primary range of products offered by the company includes microcontrollers, sensors, and embedded systems. The modernizations implemented by MICROTECH are of significant importance in several industries, such as automotive, consumer electronics, and industrial automation. MICROTECH's components are well regarded for their dependability and utilization of modern technology. These attributes subsidize to the progress of electronics by enabling smooth integration and augmenting functionality across many applications.
-
-
-
-
-
-
-
-
-
Evident
Thickness Gauges
Company Overview
Evident Corporation is a scientific research and development company in Shinjuku, Tokyo that was established in 2008. Formerly known as Olympus Scientific Solutions, the company specializes in developing cutting-edge technology and products for various industries, including aerospace, automotive, electronics, energy, and medical research. Evident Corporation has proliferated and expanded its product offerings and services to meet the needs of its customers. Their product offerings include non-destructive testing (NDT) solutions such as thickness gauges and automated inspection systems, XRF analyzers like handheld XRF analyzers, industrial microscopes, and video scopes and borescopes.
-
-
-
-
-
Tritex NDT Ltd
MULTIGAUGE 4000 SERIES ROV UNDERWATER THICKNESS GAUGE
-
-
-
-
Company Overview
Alpa Srl, a company founded in 1943 and headquartered in Pontoglio, Italy, is a manufacturer and supplier specializing in measuring machines and instruments. The company's product portfolio includes analog micrometers, CNC coordinate measuring machines, and digital dial gauges. These products are used in various sectors, including renewable energy generation, metalworking, and research and development. The company offers services including technical support, fast delivery of its products to customers, and calibration of its instruments while possessing the ISO 9000 and IATF 16949 certificates.
-
-
-
-
U-THERM International HK Limited
Thickness gauge
Distributor Overview
U-THERM International HK Limited, established in 2008 and headquartered in Tsim Sha Tsui, Kowloong, Hong Kong, is a supplier of laboratory analysis, testing, and measuring instruments and equipment. Its extensive product range includes analytical balances for precise laboratory weighing, spectrophotometers for quantitative analysis across scientific fields, DRS spectrometers, as well as ICP (Inductively Coupled Plasma) instruments for detecting metals and nonmetals in liquid samples, and lab or medical refrigerators for storage purposes.
-
-
-
-
-
Advanced NDT Limited
Ultrasonic Thickness Gauges
Distributor Overview
Advanced NDT Limited is a supplier of non-destructive testing equipment founded in 1993 and headquartered in Worcester, United Kingdom. The company’s product offerings include ultrasonic thickness gauges, coating thickness gauges, ultrasonic flaw detectors, and bond testers. It also supplies ultrasonic transducers, UV lights and torches, and forensic lighting, along with portable imaging systems and automated testing systems. The company supplies NDT equipment to various sectors, including power generation, petrochemical plants, automotive, eerospace, and the MOD.
-
-
-
-
-
Accusize Industrial Tools
Thickness Gauges
Distributor Overview
Accusize Industrial Tools was born in Toronto, Canada in 2008. Accusize is a distributor of measuring tools, cutting tools, and machine tools for metalworking companies. A portion of offerings that Accusize offers includes collet blocks, expanding arbors, air tools, power tools, die maker tools, annular cutters, bore gages, boring bars, boring heads, BT40 tooling, CAT40 tooling, calibration, layout, & machine setting tools, calipers & attachments, carbide inserts, end mills, force gauges, and metrology and material testing equipment.
-
-
-
-
-
Precision Calibration Systems, LLC
Thickness Gauges
Distributor Overview
Precision Calibration Systems was started in 2009 and is headquartered in Morristown, Tennessee. The company is a full-service ISO 17025 accredited calibration laboratory providing both small firms and Fortune 500 companies in automotive, manufacturing, aerospace, food & drug, and other industries with calibration services for a wide range of measuring instruments. The company offers onsite and in-house calibration services on many types of devices such as medical thermometers, analytical balance scales, pneumatic pressure gauges, optical comparators, and electrical multimeters. The company also offers equipment sales from companies such as Mitutoyo, Starrett, Tohnichi, and Ametek.
-
-
-
-
-
MSI-Viking Gage, LLC
Thickness Gauges
Distributor Overview
MSI-Viking Gage, LLC was founded over 50 years ago and is headquartered in Duncan, South Carolina. MSI-Viking provides manufacturing support to the automotive, aerospace, metals, plastics, medical, energy, food & beverage, and machining industries. MSI-Viking product offerings include 3D scanning systems, 3D additive manufacturing, air gages, bore & hole gages, calipers, CMMs, computed tomography, data collection, depth gages, fixture systems, indicators, laboratory equipment, vision systems, and thread gages among others. Services include calibration, metrology, repair, embedded services, training, and metrology pre-op services.
-
-
Thickness Gauge Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Lumetrics |
4.9%
|
| 2 | Vitrek Corp. |
2.5%
|
| 3 | Semiconsoft, Inc. |
2.5%
|
| 4 | Power House Tool, Inc. |
2.5%
|
| 5 | Precision Brand Products, Inc. |
2.5%
|
| 6 | Rhopoint Americas Inc. |
2.5%
|
| 7 | United States Ball Corp. |
2.5%
|
| 8 | GEI International, Inc. |
2.5%
|
| 9 | Brunswick Instrument, LLC |
2.5%
|
| 10 | TESTER SANGYO CO,. LTD |
2.5%
|
Derivation Method
The ranking is calculated based on the click share within the thickness gauge page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Hitachi High-Tech America, Inc.: 13,397
- SONOTEC GmbH: 190
- Honesdom international HK limited: 125
Newly Established Company
- Rhopoint Americas Inc.: 2018 (6 years ago)
- AMK Plastics LLC: 2018 (6 years ago)
- Shenzhen Wintact Electronics Co., Ltd.: 2015 (9 years ago)
Company with a History
- KERN & SOHN GmbH: 1844 (180 years ago)
- BYK-Gardner: 1873 (151 years ago)
- KÄFER MESSUHRENFABRIK GMBH & CO. KG: 1932 (92 years ago)
Thickness Gauge Manufacturers in United States
*Including some distributors, etc.
- Rex Gauge, LLC.
- Gilson Company, Inc.
- United States Ball Corp.
- Trinity Brand Industries, Inc.
- Precision Brand Products, Inc.
- Power House Tool, Inc.
- Micro Quality Calibration, Inc.
- Kent Machine, Inc.
- GEI International, Inc.
- Fischer Technology, Inc.
- Brunswick Instrument, LLC
- Telemark
- DeFelsko Corporation
- Vitrek Corp.
- Hitachi High-Tech America, Inc.
- Western Gage Corp.
- Rhopoint Americas Inc.
- Lumetrics
- Advanced Gauging Technologies, LLC
- Worldwide Chuck Services, Inc.
- Midway Industrial Supply & Systems
- Inspection Technologies Inc
- AMK Plastics LLC
Global Distribution of Thickness Gauge Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
23 | 37.7% |
Germany
|
10 | 16.4% |
China
|
8 | 13.1% |
Japan
|
7 | 11.5% |
United Kingdom
|
5 | 8.2% |
India
|
2 | 3.3% |
Turkey
|
1 | 1.6% |
Taiwan
|
1 | 1.6% |
Italy
|
1 | 1.6% |
France
|
1 | 1.6% |
|
Ukraine
|
1 | 1.6% |
Canada
|
1 | 1.6% |
