This section provides an overview for sealants as well as their applications and principles. Also, please take a look at the list of 0 sealant manufacturers and their company rankings.
Table of Contents
Sealants are materials that are applied and filled into gaps and seams to make buildings and pipes waterproof and airtight.
It is used not only for professional use at construction sites but also for general use as an emergency treatment for repairing cracks in exterior walls and leaks in roofs. Various types of sealants are available at home improvement stores, and the material is easy to obtain.
The term "sealing material" includes sealants, which are liquid or paste solvents, as well as sealing tape, rubber packing, and other shaped materials.
Sealants are used to strengthen airtightness and waterproofing in a wide range of locations, including building exteriors, interiors, and piping. They are also used to prevent joint misalignment caused by temperature changes, vibration, and pressure.
In general buildings, sealants are mainly used in the following areas:
In other words, sealants are used and effective in areas of the building where there is a risk of water leakage, where there is a risk of water intrusion into the building, and where components are buffered and at risk of damage.
In addition, it is also used at the joints of piping, such as water pipes and gas pipes, to protect them from water and gas leaks. Sealants used for water pipes, hot-water pipes, and other water supply piping for drinking water should not only be airtight but also have excellent anti-corrosion and anti-corrosion properties.
The principle of sealants is to fill and bond gaps and joints at the point of application by curing the raw polymer in a variety of ways.
There are two processes involved in curing a sealant:
One-component sealants have the advantage of being stable in quality, with little under-mixing or poor curing, and being cartridge-type, making them less labor intensive. However, they take time to dry.
The advantage of two-component sealants is that the strength and speed of curing can be controlled depending on the environmental conditions of the application site. However, they are labor intensive, requiring an agitator or special applicator. In addition, since it relies on the operator's knack, there is variation in quality.
There are two types of sealants: one-component and two-component. The one-component type is further divided into the following three major types:
Moisture cure type cures when the raw polymer reacts with moisture in the air. This is the most common type of sealant. Silicone-based, modified silicone-based, polyurethane-based, and polysulfide-based sealants are available.
The dry-curing type is a sealant with strong adhesive strength because the raw polymer hardens as it dries. Acrylic and butyl rubber types are available.
The non-hardening type forms a film on the surface in reaction to oxygen, but does not harden internally. When sealants were first used, this non-hardening type was the mainstream. Oil-based caulking materials correspond to this type. Since it does not have excellent weather resistance, care should be taken when using it.
Each type of sealant has the following characteristics:
In light of these characteristics, it is important to select the appropriate sealant according to the location and application.
*Including some distributors, etc.
Sort by Features
Number of Employees
Newly Established Company
Company with a History
18 products are listed.
Edec Co., Ltd.
30+ people viewing
Silicone -based heat -resistant shirings, high -temperature ceramic -silicone type heat -resistant seal agents, and glass -based high heat -resista...
Kansai Patate Kako Co., Ltd.
20+ people viewing
Miracle ONE is a groundbreaking putty that is made of a well -balanced combination of special resin and filling, which allows you to overturn the c...
Kansai Patate Kako Co., Ltd.
20+ people viewing
Although it is a thick putty, it is unprecedented and smooth when applied. ■ Characteristics ・ Smooth and good growth. ・ Easy to polish and fini...
Kansai Patate Kako Co., Ltd.
30+ people viewing
The seal putty is a sticker material with polybetene resin and synthetic adhesive, which has excellent adhesion. It is a putty with excellent long ...
Kansai Patate Kako Co., Ltd.
30+ people viewing
It is a seal material made from polybetene resin and synthetic adhesive, and has excellent adhesion. Flame retardance. Car material fuel test. It i...
Kansai Patate Kako Co., Ltd.
20+ people viewing
It is a breakthrough one -shot putty (emulsion system) that has not been Yase cracks. With the development of this one -shot putty, it is possible ...
Kansai Patate Kako Co., Ltd.
20+ people viewing
■ Characteristics ・ It is easy to carry because it has few Yase and is lighter. ・ The workability is outstanding because it has moderate stickine...
Kansai Patate Kako Co., Ltd.
30+ people viewing
Last viewed: 2 hours ago
■ Use Air conditioner plumbing sticker
Kansai Patate Kako Co., Ltd.
30+ people viewing
Cab seal echo is used for construction methods using a cake board of the fire prevention measures method of the cable penetration. It can also be u...
Kansai Patate Kako Co., Ltd.
30+ people viewing
It is a method with excellent workability only to fill the penetrating part with heat -resistant seal material. (1 hour of fire resistance)
Kansai Patate Kako Co., Ltd.
20+ people viewing
■ Characteristics ・ It can be used immediately after taking it out. (Soft paste type) ・ Good workability. ・ There is almost no thinness. ・ Ultr...