Nakamura Manufacturing Co., Ltd.'s Inside Vernier Calipers

■Features Dial type direct reading caliper. Easy to read with gold-based scale plate.

• Meters & Instruments

• Inside Vernier Calipers

■Features The thickness of the outer jaw tip is 0.8mm, making it ideal for groove measurement. With external output function.

• Meters & Instruments

• Inside Vernier Calipers

■Features Since it is a roller type probe, it can smoothly measure curved or circular workpieces. Equipped with a peak function that holds the maxi...

• Meters & Instruments

• Inside Vernier Calipers

■Features Send measurement data with a single button. Compact design with built-in transmitter. The transmission completion lamp lights up on the d...

• Meters & Instruments

• Inside Vernier Calipers

■Features Ideal for deep internal measurements. With external output function.

• Meters & Instruments

• Inside Vernier Calipers

■Features Ideal for deep internal measurements. It is a direct reading type.

• Meters & Instruments

• Inside Vernier Calipers

■Features A long caliper with upward facing jaws, ideal for measuring spheres and pipes. With peak hold function, the maximum measured value can be...

• Meters & Instruments

• Inside Vernier Calipers

■Features Ideal for measuring pipes and spheres. With external output function.

• Meters & Instruments

• Inside Vernier Calipers

■Features - Ideal for measuring the diameter of pipes, etc. The displayed value can be transferred to a PC. -The transmitter is built into the digi...

• Meters & Instruments

• Inside Vernier Calipers

■Features You can hold the measured values ​​of inside and outside measurements and check them at hand.

• Meters & Instruments

• Inside Vernier Calipers

■Features Digital type pita caliper. The display is larger than conventional products and the numbers are easier to read.

• Meters & Instruments

• Inside Vernier Calipers

■Features The outer jaw tip is sharp, making it ideal for measuring irregularly uneven areas. With external output function.

• Meters & Instruments

• Inside Vernier Calipers

■Features Ideal for external measurements and deep blind holes that cannot be measured with normal straight jaws. With external output function.

• Meters & Instruments

• Inside Vernier Calipers

■Features Both the outer and inner jaws are long, making it ideal for narrow and deep measurement locations. With external output function.

• Meters & Instruments

• Inside Vernier Calipers

■Features ・3 measurements possible with depth bar with hook ・Displayed measurement values ​​can be transferred to a PC with a single measurement ...

• Meters & Instruments

• Inside Vernier Calipers

■Features Measurement in the same direction is possible. The thickness of the lower jaw tip is 0.8mm, making it ideal for groove measurement.

• Meters & Instruments

• Inside Vernier Calipers

■Features There are two types of digital long calipers: 600mm and 1,000mm.

• Meters & Instruments

• Inside Vernier Calipers

■Features Ideal for measuring deep inner diameters. There are two types of jaw length: 56mm and 76mm.

• Meters & Instruments

• Inside Vernier Calipers

■Features Ideal for measuring spheres and pipes.

• Meters & Instruments

• Inside Vernier Calipers

■Features Long type standard caliper with JIS mark.

• Meters & Instruments

• Inside Vernier Calipers

■Features End face measurements, height measurements, and inside measurements that were not possible with conventional products are possible.

• Meters & Instruments

• Inside Vernier Calipers

■Features ULJ judgment function + measurement between round hole pitches is also possible. The probe can be removed at any time.

• Meters & Instruments

• Inside Vernier Calipers

■Features The outer and inner jaws are longer than the standard model, making it ideal for narrow and deep measurement locations.

• Meters & Instruments

• Inside Vernier Calipers

■Features The short jaw makes it suitable for measuring deep holes with no height.

• Meters & Instruments

• Inside Vernier Calipers

■Features Standard long calipers from 70mm pocket size to 1,500, 2,000, 2,500, 3,000, and 4,000 (mm).

• Meters & Instruments

• Inside Vernier Calipers

■Features By setting the upper and lower limit values ​​and applying it to the workpiece, you can instantly make an OK or NG judgment. Ideal for in...

• Meters & Instruments

• Inside Vernier Calipers