All Categories
History
This section provides an overview for parts washers as well as their applications and principles. Also, please take a look at the list of 41 parts washer manufacturers and their company rankings. Here are the top-ranked parts washer companies as of December, 2024: 1.Graymills, 2.Walsh Manufacturing, 3.Equipment Manufacturing Corporation.
Table of Contents
Categories Related to Parts Washers
Parts washers are machines that clean parts produced in factories and other facilities. There are a wide variety of products, from small to large parts that are compatible with various cleaning methods. Cleaning methods include ultrasonic, vacuum, and jet cleaning. The cleaning method is determined according to the type of contamination and parts. There are also a variety of installation methods for parts to be cleaned, including automatic transport and manual movement.
In addition to cleaning, some models are equipped with air blow drying and vacuum dryers.
Parts washers are used to clean a wide variety of parts, from small to large. In some cases, high water pressure is used to clean and deburr parts at the same time.
Ultrasonic cleaning is used to clean fine parts, such as semiconductors.
Cutting parts for electronics and precision parts, and smaller parts for automobile engines and undercarriages, are often placed in a basket and rotated like a washing machine for cleaning.
Large workpieces are brought in one by one and cleaned by jetting, etc.
The principle of parts washers depends on the model but is often similar to that of dishwashers or washing machines. Parts are placed in a drum and rotated with water and detergent to remove dirt.
Parts washers also offer a variety of cleaning methods. Each cleaning method is selected for its unique characteristics.
Jet cleaning is a method that uses high-pressure jets of water and detergent to remove dirt. Water-soluble alkaline detergents may be used, but hot water can be used for powerful degreasing.
Vacuum cleaning is a method in which air is exhausted from a chamber made of metal and the pressure is lowered to remove dirt. This method can remove even the smallest dirt that is stuck in small holes.
Deaeration cleaning uses higher air pressure than vacuum cleaning, but the same principle of degreasing is used. Since it does not require as expensive equipment as vacuum cleaning, costs can be kept low.
Ultrasonic cleaning removes dirt by immersing parts in water and applying ultrasonic waves to remove dirt. Oil and hard-to-remove dirt can be removed without rubbing. It is also used to clean fine particles from semiconductors, etc.
*Including some distributors, etc.
Sort by Features
Sort by Area
LAPMASTER WOLTERS’s roots go back as far as 1804 with the founding of Peter Wolters. Lapmaster was founded in Chicago in 1948 as a manufacture of lapping and polishing machines for the mechanical seal market, Lapmaster has grown to a worldwide solution provider for more than 20 industries like precision optics and advanced materials. Lapmaster serves many industries including automotive, semiconductor, electro optics, and medical devices. Lapmaster also sells many consumables including abrasive powders, lapping compounds diamond lubricants, and composite plates. Products include lapping, polishing, bore honing, buffing, grinding, and special purpose machines.
JST Manufacturing Inc., established in 1982 and based in Idaho, USA, is a manufacturer and supplier of wet benches and semiconductor equipment. The company specializes in designing and producing chemical processing systems for semiconductor manufacturing solutions that reduce environmental impact and maximize cleanroom efficiency. Its product range includes process modules, medical cleanroom equipment, and specialized semiconductor parts cleaning machinery. It optimizes laboratory and production environments by serving the optoelectronics, biomedical, and food processing industries. The company also provides various services, including custom metal fabrication and technological support.
Viking Corporation, founded in the year based in Kansas, United States, is a manufacturer and supplier of industrial cleaning equipment. The product portfolio includes short blast machines, industrial washers, vibrating equipment, industrial dust-collecting equipment, stock machines, and other cleaning solutions. The products are used in foundry, forge, structural and plate, propane, and welding industries. The company also offers repair and rebuild services with tailor-fit customized solutions under the guidance of professional engineers.
Graymills, established in 1939 and based in Chicago, United States, is a manufacturer of equipment used in metalworking pumps, ink pumps, filters, and parts washers. The company produces different types of pumps, such as peristaltic, diaphragm, and centrifugal pumps, that are used in different industries, including automotive, aerospace, medical & scientific devices, and military. The manufacturing unit is located in Illinois to manufacture equipment such as laser cutters, fabrication, welding, and CNC machine shops. Initially, the company started with machine tool coolants and later added cleaning equipment to the portfolio of products.
Equipment Manufacturing Corporation is an American industrial wastewater evaporators manufacturer that was established in Santa Fe Springs, California in 1981. The company primarily produces its WATER EATER brand wastewater evaporators for reducing disposal costs of non-volatile waste streams, as well as its POWERJET brand automated parts washers for cleaning automotive or industrial parts, components, and assemblies. It also offers equipment servicing and custom engineering services for unique customer projects. The company’s products are used mainly in the metalworking, aerospace, automotive, and pharmaceutical industries.
Walsh Manufacturing Corporation is an American manufacturer of industrial parts washing systems established in 1963 and based in Cleveland, Ohio. The company produces a wide range of parts washing equipment including rotary, dip, monorail, and belt style parts washing machines, as well as parts washing automation equipment. It also offers metal fabrication and machine rebuilding services to customers requiring additional support. The company primarily serves clients in the automotive, aerospace, medical and industrial manufacturing sectors.
Niagara Systems LLC was established in 1934 and is based in Mentor, Ohio is a manufacturer and provider of industrial washing and drying systems. The company’s product portfolio includes cabinet washers, tunnel washers, drum washers, tote washers, and more. The industrial washing and drying systems are designed for quality, performance, and reliability. The products are used in various industries such as metal fabrication, automotive, aerospace, food processing, and pharmaceuticals. It offers custom washing systems that can be tailored to meet the specific needs of each customer.
StingRay Manufacturing LLC is an American manufacturer of industrial parts washers established in 2009 and based in St. Louis, Missouri. The company produces washers for a range of industrial parts including heavy duty retractable parts, clamshell parts, orbital horizontal parts, and aircraft wheels. It also offers repair and retrofitting, inspection, installation, and personnel training services. The company chiefly serves clients in the oil and gas, military and aerospace, mining, and automotive sectors.
Alliance Manufacturing, Inc. is an American industrial parts washers manufacturer that was incorporated in Fond du Lac, Wisconsin in 1994. The company specializes in producing aqueous parts washers and cleaning systems, including monorail, belt, chain, and return-to-operator washers. It also offers compact cell washers for low-volume applications as with prototypes or mockups, as well as oil removal equipment that utilizes skimming or coalescing media. The company’s products are used mainly by its clients in the automotive, aerospace, agriculture, and defense industries.
Best Technology Inc., founded in 1992 with headquarters in the USA, is a manufacturer of industrial cleaning, passivation, and finishing systems. The company's aqueous cleaning alternatives to solvents include industrial parts washers, electropolishing machines, ultrasonic benchtop parts cleaners, ultrasonic vapor degreasing machines, and engineered cleaning fluids used in various industries, including the medical, aerospace, electronics, automotive, and semiconductor markets. Examples of Best Technologies product applications include medical device sterilization and environmentally and operator-friendly degreasing machines used to clean airplane engines.
HPI Processes, Inc. was founded in 1978 and is located 20 miles north of Philadelphia in Bucks County, Pennsylvania. The company is a privately held engineer of environmentally friendly technology for processing lines in the manufacturing industry. The company serves industries such as automotive, manufacturing, aerospace, and construction. The company provides inspection, cleaning, and draining services. In addition, the company has custom fabrication capabilities for the design, repair, and modification of equipment such as exhaust hoods and dampers. The company is experienced in thermos-welding and CNC router machining and heat forming for materials including PFC, PVDF, and acrylic.
AQUASGROUP, founded in East Providence, RI, in 1986 is a manufacturer of Water Recycling and Metal Finishing Systems. The company's product portfolio includes Rebidding, Zero Liquid Discharge, Automation, Industrial Parts Washers, Metal Finishing Process Lines, and Process Rinse Water Recycling. The company serves markets such as Aerospace, Automotive, Medical, Electronics, Marine, and Jewelry. The company also provides services including national distribution, product selection, installation, preventative maintenance, troubleshooting, repair and customer service.
CRW Finishing, Inc. was founded in 1977 and is located in Addison, Illinois is a manufacturer and trader of metal finishing equipment. The company offers an array of products including wastewater treatment system supplies, centrifugal disk finishing equipment, and abrasive belt and buffing equipment. It extends services like surface refinement, decorative finishing, and tube polishing. These products find applications in sewage and water treatment plants, welding and woodwork facilities, and manufacturing of automobiles.
Surface Combustion, Inc., established in 1915, is a manufacturer and provider of industrial heat treatment solutions headquartered in Maumee, Ohio, USA. With over 100 years of experience, they offer a diverse range of products, including batch and continuous heat treat furnaces, atmosphere and vacuum heat treat furnaces, and gas generators. The company has a manufacturing facility in Waterville, Ohio, USA, which serves industries like aerospace, automotive, oil & gas, and more. Additionally, they provide in-house technical support, a large inventory of replacement parts, and an active team of customer service engineers, ensuring quick and effective troubleshooting.
Ransohoff was founded in 1916 and is located in Cincinnati, Ohio. Today, the company is a division of Cleaning Technologies Group. Cleaning Technologies Group is a provider of innovative process technologies to precision and industrial global manufacturing markets. Ransohoff is a manufacturer of aqueous and solvent-based parts cleaning systems as well as a complete line of recyclable aqueous chemistries and waste minimization technologies. The company serves market sectors including electrical components, optics, general manufacturing, heavy-duty trucks, and off-road vehicles. The company offers industrial parts washers, ultrasonic and megasonic cleaning systems, benchtop cleaning systems, and electronic cleaning systems.
ADF Systems, Ltd., founded in 1984, is a manufacturer based in Humboldt, Iowa specializing in manufacturing parts washers and pressure washers. The company offers a range of aqueous cleaning systems, including custom-built washers for specialized applications. Their line of pressure washers include portable, stationary, and trailer-mounted systems and both cold and hot water variants. They also supply proven detergents for parts washing applications. ADF's parts washers and pressure washers cater to industries such as Aerospace, Medical, Pharmaceutical, Automotive, and more.
Ultrasonic Power Corporation was founded in 1972 and is headquartered in Freeport, Illinois. The company is a global ultrasonic cleaning company, serving as a designer, developer, manufacturer, and distributor of ultrasonic equipment used in the aerospace, automotive, energy, manufacturing, pharmaceutical, and music industries. The company maintains four product segments: industrial Ultrasonic Cleaners, Custom Ultrasonic Cleaners, Ultrasonic Cleaning Products, and Ultrasonic Cleaning Applications. These range from small cleaning tanks sized to hold a single PCB board to 204-gallon tanks capable of cleaning large machinery.
Upton Industries, Inc. (UI) is an American manufacturer and distributor of thermal processing furnaces and equipment that was established in 1937 in Roseville, Michigan. The company produces various furnaces, including pit-type, salt bath, batch, and other specialty models for use in a wide range of heat treatment processes. They also offer transformers, washers, and replacement parts for repair or maintenance of their portfolio products. UI products are used in the manufacturing and heat treatment processes of client companies in various industries, including in metalworking, chemical processing, and energy production.
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
Midwest Fasteners, Inc. established in Miamisburg, Ohio, is a supplier of shot blasting equipment, dust collection systems, parts washers, and pneumatic conveying systems. Their product portfolio includes Airless Centrifugal Blasting, Posi-flate, Washers, Blast Media, Nu-Soft Blast Media and Solvent Recyclers as well as posi-flate butterfly valves for optimizing the manufacturing process, and are used in industries such as construction, textiles, automotive and chemical industry. The company has customer service and a national distribution channel.
The Cary Company, founded in 1895 and headquartered in Addison, Illinois, is a supplier of container, packaging, and spill control products and solutions. It stocks products like pails, plastic jars, and caps used in several industries, including construction, industrial chemicals, and personal care. The company provides several services, including label application, bottle design and manufacturing, and product sourcing. In 2018, it acquired Gurman Container & Supply Corporation, which helped it expand in the rigid packaging industry. Later, in 2019, it acquired Three Rivers Packaging Inc. to grow its drum and tote offering.
Omni Finishing, founded in 1986, is a distributor in the surface finishing and coating industry, headquartered in Ivyland, Pennsylvania, USA. The company is WBNEC certified and provides a comprehensive range of finishing equipment, parts, supplies, abrasive media, and compounds. Their team consists of experts who can assist in developing or fine-tuning surface finishing systems and processes. They also offer customized training for their all equipment, complimentary consulting services, sample processing, and equipment service and repair. Their diverse range of products include Air Blast Cabinets, Wheel Blast, Vibratory Finishing, Wet Blast, Portables, and Blast Rooms among others.
Digitronic Automationsanlagen GmbH, established in 1985 in Lodi, Italy, is a manufacturer and supplier of industrial and building automation solutions. The company’s products include compact devices, PLC assembly groups, and modular components with connections to standard bus systems. Special components like switching accelerators complete their product range. Digitronic excels in building automation, providing controls, monitoring, and remote access for energy producers and consumers worldwide. The company aims to offer energy-efficient solutions, making it efficient in data transfer for safety engineering. Digitronic ensures customer satisfaction through its broad portfolio of products.
OFRU Recycling, founded in 1978 and headquartered in Alzenau, Bayern, Germany, is a developer, manufacturer, and supplier of special cleaning equipment and systems. The company's technologies for recycling and recovering contaminated combustible solvents and cleaning agents that are available for tank and container washing machines, mixing vessel cleaning systems, and component cleaning systems used across industry, including the pharamceutical processing, printing and packing, and electronics manufacturing sectors. It also offers engineered-production large-scale solvent recovery and dilstillation plants for waste management companies.
Ompi s.r.l., established in 1994 and headquartered in Reggio Emilia, Italy, is a manufacturer of a vast array of glass containers. The company's product line includes pharmaceutical packaging vials, syringes, ampoules, cartridges, and more. It also provides portable tire inflators, diesel oil equipment, and grease equipment. Its glass vials can be tailored to meet the different needs of biopharmaceutical customers, with full control over geometry and surface chemistry. The company has obtained MID-MI005 and OIML R117-1 certifications and primarily serves the pharmaceutical industry.
PROCECO Ltd. is a Canadian manufacturer of water based or aqueous parts washers and washer systems that was established in 1975 in Montreal, Quebec. The company’s product portfolio includes spray-immersion washers, reciprocating nozzle frame washers, conveyor washers, and turntable cabinet washers. It also offers hydro deburring equipment, slurry blasting machines, and wastewater treatment systems. The company’s products are used mainly by its clients in the automotive, aerospace, rail, and renewable energy industries.
ES Systems, established in 2013 with headquarters in Greece, is a manufacturer of pressure and flow sensors based on micro-electronics technologies. The company's product line includes thermal gas flow meters, mass flow transmitters, silicon capacitive pressure sensors, MEMS sensors, and heavy-duty pressure transmitters. These products are used in the manufacture of medical equipment, industrial automation, aerospace applications, and HVAC systems. The company also provides custom design, engineering, and manufacture of MEMS systems and sensor solutions.
Quality Finishing Systems is a manufacturer of industrial paint finishing equipment, founded in 1998, and headquartered in Grant, Michigan. Its product range consists of both custom and standard batch ovens, washers, full finishing systems, components, as well as retrofits and booths. These products facilitate the efficient and precise application of paint and coatings in various industrial processes. The company also offers on-site consultation and design, installation, startup, and training for all customers.
R.G. Hanson Co., Inc., established in 1963 and headquartered in Bloomington, Illinois, is a manufacturer of industrial parts washers and associated equipment. The company provides a diverse array of washers, from standard to custom-built, catering to various customer needs. Its offerings span laboratory batch washers to large-scale solutions for steel mills and beyond. Its product range encompasses spray washers employing high-pressure spray nozzles for effective cleaning, including cabinet, conveyor, and rotary washers. Additionally, solvent cleaning systems, and parts washer accessories such as oil skimmers, heaters, pumps, and timers are also offered.
MEKA, established in 1987 and headquartered in Ankara, Turkey, operates as both a manufacturer and supplier, specializing in concrete plants and crushing & screening equipment. The company's products include ready-mix concrete plants, consisting of stationary concrete batching plants, mobile concrete batching plants, compact concrete batching plants, precast concrete plants, and more. It serves the construction and cement industries, providing its products to companies such as Hochtief, Fluor, Strabag, LafargeHolcim, and Heidelberg Cement. It operates from three manufacturing facilities, spanning Ostim/Ankara (5,000 m2), Temelli/Ankara (18,000 m2), and Eskisehir (30,000 m2), enabling an annual production capacity of 250 concrete batching plants.
VIXEN Surface Treatments is a manufacturer and supplier of wet blast cleaning and surface treatment products that was established in Stockton-On-Tees, United Kingdom, in 1990. The company’s product lineup includes aqueous degreasing machines for removing contaminants from metal surfaces, wet blasting machines for slurring applications, and phosphating machines for conversion coating of metal or iron parts. The company’s products are commonly used by its clients in the aerospace, additive manufacturing, and automotive industries.
PERO AG, founded in 1953 and based in Augsburg, Germany, is a manufacturer and supplier of cleaning systems. The company has an extensive product catalog including PERO units designed for cleaning with solvents and PERO units for cleaning with aqueous media. These cleaning systems are utilized across various industries, including automotive and aerospace manufacturing, jewelry and watch-making, lighting, as well as the production of electrical and optical equipment. It also offers comprehensive after-sales services, including cleaning unit maintenance and the availability of spare parts.
CleanFreak.com was established in 1995 and is headquartered in Knoxville, Tennessee. The company is a distributor of cleaning-related products for automobiles, factories, homes, and offices to commercial, industrial, and residential customers around the world. The company offers popular brands including Bissell, Clorox, Rubbermaid, and Hoover. The company’s product segments include floor cleaning, carpet cleaning, and others. The other categories include tools and accessories for auto detailing, janitorial supplies, power washers, and safety equipment.
C-T Products Company is based out of Rolling Hills Estates, California and has a 50 year history of being a manufacturer’s representative and distributor of industrial parts and process equipment for customers globally. Industries served include packaging, medical, electronics, semiconductor, plastic injection molding and extrusion, rubber compression molding, composites, aerospace, defense, military, cryogenics, petrochemical, and OEM. C-T Products sells washing equipment and many types of heaters including process hot air heaters, cartridge heaters, coil heaters, band and strip heaters, formed tubular, immersion, calculation, duct heaters, infrared heaters silicone heaters, industrial thermal process ovens.
Precision Finishing Inc. is a manufacturer of high-quality surface finished solutions situated at State of Pennsylvania and founded in 1955. The business provides industrial wash, waste treatment, shot peen, vibratory, isotropic, and abrasive blasted services. The company has a significant market share, provides a broad range of services, such as abrasive blast, vibratory mass media finish. They provide effective surface treatment solutions to a variety of industries, which includes automotive, aerospace, and healthcare.
Pacific Bay Equipment was founded in 1987 in Modesto, California, where it is still headquartered today. The company serves agriculture, marine, manufacturing, waste management, and other industries as a distributor of cleaning, pressure washing, and related machinery and equipment. The company’s product segments include both machines and other equipment. Machines include floor scrubbing machines, sprayers, steam cleaners, and generators. Other equipment includes detergent, parts, and accessories. In addition to new equipment, the company also offers used equipment, repair, rentals, and trade-ins.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Graymills |
5.6%
|
| 2 | Walsh Manufacturing |
4.9%
|
| 3 | Equipment Manufacturing Corporation |
4.3%
|
| 4 | AQUASGROUP |
3.8%
|
| 5 | Viking Corporation |
3.4%
|
| 6 | The Cary Company |
3.4%
|
| 7 | Upton Industries, Inc. |
3.4%
|
| 8 | Niagara Systems |
3.0%
|
| 9 | PROCECO Ltd |
3.0%
|
| 10 | Lapmaster International, LLC |
3.0%
|
Derivation Method
The ranking is calculated based on the click share within the parts washer page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
22 | 73.3% |
|
Germany
|
3 | 10.0% |
|
Italy
|
1 | 3.3% |
|
Canada
|
1 | 3.3% |
| 1 | 3.3% | |
|
Turkey
|
1 | 3.3% |
|
United Kingdom
|
1 | 3.3% |
162 products found - Page 5
162 products - Page 5
Shinka Sangyo Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Showa Co., Ltd.
30+ people viewing
Last viewed: 21 hours ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
20+ people viewing
Last viewed: 19 hours ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 10 minutes ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
20+ people viewing
Last viewed: 16 hours ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Shinka Sangyo Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
30+ people viewing
Last viewed: 21 hours ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Shinka Sangyo Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 14 minutes ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
30+ people viewing
Last viewed: 2 hours ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Shinka Sangyo Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
By irradiating ultrasonic waves into a liquid, a process called cavitation occurs, in which bubbles are generated, compressed, and collapsed, and t...
Showa Co., Ltd.
30+ people viewing
Last viewed: 8 hours ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Showa Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
Showa Co., Ltd.
30+ people viewing
Last viewed: 1 day ago
A variety of methods are available for cleaning, including showers (from low pressure to high pressure), ultrasonic waves, and air blow, hot air, a...
