42 Blind Rivet Manufacturers in 2024
This section provides an overview for blind rivets as well as their applications and principles. Also, please take a look at the list of 42 blind rivet manufacturers and their company rankings. Here are the top-ranked blind rivet companies as of November, 2024: 1.RIFSYS TECHNOLOGIES, 2.Industrial Rivet & Fastener Company, 3.Product Components Corporation.
Table of Contents
Categories Related to Blind Rivets
What Is a Blind Rivet?
Riveting is one of the simplest and strongest ways to join metal plates that cannot be disassembled. A rivet, in the form of a pin with a head, is inserted into a through-hole machined in the joint area. The head side is supported by a base, and the pin side is plastically deformed by a hammer, press, etc., to secure the joint.
Currently, if the part to be joined has a sealed structure or is a large part that is difficult to handle, it may not be possible to insert the rivet from the backside of the joint or receive the head of the rivet by the base during riveting.
The blind rivet is a fastening component that enables joining from only one side of the part to be joined.
Uses of Blind Rivets
Since normal rivet joints have the same tightening strength as bolts and nuts and do not loosen after joining, they are used in a wide range of fields. These include hot-riveting ships, bridges, and steel towers to cold-riveting aircraft, general can manufacturing sheet metal products, and household pans and kettles.
Since blind rivets are an alternative to regular rivets, they are used in the same fields and products where rivets are used, but primarily as an alternative for cold joining with a rivet diameter of 2.4 to 6.4 mm.
Principle of Blind Rivets
A blind rivet consists of a body, similar in shape to a normal rivet but with a through-hole in the center of the rivet diameter, and a nail-shaped mandrel fitted into the through hole. The mandrel has a low head of smaller diameter than the rivet diameter at one end.
The mandrel is several times longer than the body and is inserted through the end of the body, with the end protruding toward the head of the body. The protruding mandrels of the blind rivets, which are a pair of mandrels and a body, are inserted into the head of the body with a special tool and passed through a pre-drilled hole in the sheet metal joint so that the head bearing surface of the body is in contact with the sheet metal.
In this state, the mandrel is pulled in with the special tool, and the low head of the mandrel tip compresses the end face of the rivet tip, causing it to be plastically deformed. A V-shaped groove is machined at the base of the mandrel's low head, which is designed to break when the mandrel retracting force of the dedicated tool exceeds the rupture resistance of that part. The force equal to the rupture resistance causes plastic deformation of the body tip to join the target metal plates.
Specialized tools are available in manual, electric, and pneumatic types, depending on the drive system.
List of 42 Blind Rivet Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- France
- Germany
- Italy
- Japan
- United Kingdom
-
-
-
Vaishnavi Metal Products Corporation Pvt.
Brass Blind Rivets
Manufacturer Overview
Vaishnavi Metal Products Corporation Pvt. Ltd (US) is a manufacturer of brass and copper industrial components that was established in 2018 in Anaheim, California. The company produces a wide range of brass and copper components including cable glands, fasteners, battery terminals, fittings, and EDM wires. It also offers contract manufacturing and OEM services for customers with unique project specifications. The company’s products are used by clients in various industries including consumer electronics, automotives, telecommunications, and power generation.
-
-
-
-
-
Industrial Rivet & Fastener Company
Rivets
Manufacturer Overview
Industrial Rivet & Fastener Company, established in 1912 in Northvale, New Jersey, USA, is a manufacturer of rivets, rivet nuts, threaded inserts, and specialized fasteners. The product range includes blind rivets, solid rivets, and threaded inserts, all designed to provide strong and optimal fastening solutions. These products offer benefits such as secure joining, resistance to vibration and corrosion, and ease of installation. Industries ranging from automotive and aerospace to construction and electronics benefit from these advanced fastening solutions. The company analyzes the effects of salt spray, performs shear and tensile tests, and verifies dimensions.
-
-
-
-
-
Hanson Rivet & Supply Co,.
BLIND RIVET SELECTOR
Manufacturer Overview
Hanson Rivet and Supply Co., founded in 1929, is a supplier of rivets and riveting tools and equipment used by aerospace and commercial manufacturers. The company, based in Pacoima, California, earned its ISO 9001 certificate in 2015. They supply different rivets, such as tubular, shoulder, blind, solid, and drive. Their other products include threaded inserts, lockbolts, washers, and special fasteners. They supply riveting tools and machines, such as tool selectors, hand squeezers, and accessories. Hanson also assembles short runs, long runs, impact and squeeze riveting, and other hardware components.
-
-
-
-
-
RIFSYS TECHNOLOGIES
Blind Rivets
Manufacturer Overview
RIFSYS TECHNOLOGIES, founded in 2016 in Chatsworth, California, USA, is a manufacturer of optimum and advanced fastening systems and products. The company specializes in the production of rivets and fasteners, offering various products including solid rivets, blind rivets, and threaded inserts. These optimal-quality fasteners are designed to provide secure and optimal connections in various applications. The benefits of the products include robust tensile strength, corrosion resistance, and ease of installation. These fasteners find broad use in industries such as automotive, aerospace, construction, and electronics, resulting in the structural integrity of products.
-
-
-
-
-
Jay-Cee Sales & Rivets, Incorporated
Blind Rivets
Manufacturer Overview
Jay-Cee Sales & Rivets, Incorporated, founded in 1948 in Farmington, Michigan, USA, is a manufacturer of fasteners and industrial components. The company offers a diverse range of products, including rivets, fasteners, threaded inserts, and rivet tools, that come with superior quality and stability. These products provide benefits such as secure and durable fastening solutions, enhanced structural integrity, and ease of installation. It serves a diverse range of industries, including automotive, aerospace, construction, and electronics, where optimum and efficient fastening solutions are essential.
-
-
-
-
-
Product Components Corporation
Blind Rivets
Manufacturer Overview
Product Components Corp was founded by Joseph Saks in 1962 and operates out of Martinez, California. Product Components is a supplier of all types of plastic fasteners. Product Components provides custom molded, stamped, and machine stamped fasteners including screws, nuts bolts, knobs, washers, spacers, stand-offs, balls, and rivets among others. Product Components combines a full plastic fastener line including screws and bolts with engineered machined or molded component services for industrial applications for industries such as electronic, automotive, medical, aircraft, and food. Additional products include panel fasteners, spacers, standoffs, dowels, and other components for panel hardware.
-
-
-
-
-
Southco, Inc.
Blind Rivets STANDARD
Company Overview
Southco Inc. is based in Pennsylvania, USA, and is a manufacturer and supplier of access control hardware that was established in 1899 before its acquisition by TouchPoint, Inc. in 2012. The company specializes in engineered access hardware solutions, including latches for doors or panels, fasteners for secure attachment of components or panels, and hinges for allowing controlled rotation or positioning. It also offers a variety of handles for doors or panels, and electronic locking or access systems. The company mainly serves clients in the data center, telecom, and medical industries.
-
-
-
-
-
KD Fasteners, Inc.
BLIND RIVETS
Company Overview
KD Fasteners, Inc. was founded in 1987 and headquartered in Addison, Illinois. The company is a fastener manufacturer and distributor, specializing in custom fasteners from such materials as steel, brass, silicon bronze, and other non-ferrous metals, supplying over 100,000 different fastener components. The company has 3 product segments: standard fasteners, standard metric fasteners, and custom fasteners. Custom fastener varieties include studs, washers, machine screws, flange bolts, and many other varieties. The company also offers many plating varieties including zinc, black oxide, waxing, and Magni 565 and 560.
-
-
-
-
-
Coburn-Myers Fastening Systems, Inc.
Blind Rivets
Company Overview
Coburn-Myers Fastening Systems Incorporated was founded in Trainer, Pennsylvania in 1981. Coburn-Myers manufactures and distributes industrial fasteners and related products. Coburn-Myers focuses both on standard bolts as well as custom designs featuring hundreds of combinations of materials, head styles, heat treatment, secondary operations, and finishes. Types available include hex bolts, heat cap screws, 12-point bolds, and stocked cap screws. Primary product also include buts, fasteners, studs, hand tools, anchors, washers, and other standard products.
-
-
-
-
-
MF Supply
Blind Rivets
Company Overview
MF Supply is a stocking distributor for business, industry, and government. MF Supply specializes in fasteners, hardware, and safety supplies. MF Supply product categories include PPE & safety, brands and equivalents, custom made parts, dowel pins, electronic & panel hardware, inserts, metric, Mil-spec & domestic, nuts & washers, pins, precision shoulder screws, rivets & rivetnut inserts, screw driving tools, screws, self-clinching fasteners, socket products, spacers & standoffs, studs, and other products such as sealants, retaining rings, and screw driving tools.
-
-
-
-
-
Bayou City Bolt & Supply Co., Inc.
Blind Rivets
Company Overview
Bayou City Bolt & Supply Company, Inc. is a provider of industrial-type fasteners to various businesses, consumers, and industries around Houston Texas. These industries include energy production, construction, manufacturing & industrial, and the public sector. Bayou City Bolt offers fasteners in a variety of materials including low-carbon steel and aluminum, various coatings, such as zinc or Teflon coating, and special-order materials such as alloy 30 or bronze. In addition to fasteners, Bayou City Bolt also sells studs, drill bits, and other tools and accessories.
-
-
-
-
-
Goebel Fasteners, Inc.
Blind Rivets
Company Overview
Goebel Fasteners, Inc., founded in 1979, and headquartered in Houston, Texas, is a manufacturer and distributor of fasteners. Their products include blind rivets, rivet nuts, threaded inserts, lockbolts, tools, and equipment catering to industries such as aerospace, automotive, construction, electrical, and HVAC. Their products are designed to withstand rigorous industrial applications, used in assembling machinery, structures, vehicles, and equipment, providing secure and durable connections critical for the performance and safety of numerous industrial processes and products.
-
-
-
-
-
Benchmark Fasteners
Blind Rivets
Company Overview
Benchmark Fasteners, Inc. is based out of Carol Stream, Illinois. The company is a manufacturer and distributor of various varieties of fasteners and fastener-related items including drill bits, driver bits, and cable ties. The company’s product lines include standard and stainless-steel fasteners and socket screws in imperial and metric measurements. Custom options are also available for screw machine parts, stampings, CNC precision machine parts, and cold-headed parts. Additional services the company provides include poly-bagging for large or varied orders, technical assistance before and after ordering, secondary options customization of threading and plating and same-day shipping for in-stock products.
-
-
-
-
-
Texas Specialty Fasteners
Blind Rivets
Company Overview
Texas Specialty Fasteners (TSF) has honorably served as a distributor of hardware as a family-owned company since 1988 and is located in Wylie, Texas. TSF has both standard offering and custom manufacturing services of a wide range of products. These products include screws, nuts, bolts, washers, spacers & standoffs, precision parts, pins, wire handling, inserts, anchors, drill bits, taps, & dies, abrasives & sawblades, safety equipment, and miscellaneous equipment including rivets, handles, catches, and strut accessories.
-
-
-
-
-
Doran Specialties
Blind Rivets
Company Overview
Doran Specialties is based in Yorba Linda, California and is a distributor of a variety of fastening hardware and tools. Doran Specialties is 9001:2015 certified. Product categories include AN, MS, NAS, and BAC-certified fasteners including bolts, nuts, fittings, washers, rivets, screws, inserts, and pins. Doran Specialties’s other products include retaining rings, bushings, rods, cables, lanyards, captive screws and nuts, clams, connectors, semiconductors, fuses, keys, machine screws, set screws, spacers and standoffs, springs, wire forms, stampings, switches, washers, and wire. Additional aircraft-specific hardware include hook and loop fasteners, nylon fasteners, O-rings, and plugs.
-
-
-
-
-
Cook-Leitch Inc.
Blind Rivets
Company Overview
Cook-Leitch Inc. was incorporated in 1964 and serves as a distributor for engineered components and metal finishing solutions. Cook-Leitch serves a number of industries including home & commercial appliances, aerospace & defense, automotive, agriculture, fluid power & hydraulics, distribution, and heavy truck & construction equipment. Some of Cook-Leitch’s product categories include powdered metal featuring Eastern Sintered Alloys, screw machine/complex shafts featuring Precision Capital LTD, springs/wire forms/stampings featuring Wire products company, split seam tubes featuring Baker Stamping, fasteners featuring Vasco Inc, and metal finishing featuring Decal Metal Finishing, Hale Performance Coatings, and Whitaker Finishing.
-
-
-
-
-
Bolt Products Inc.
Blind Rivets
Company Overview
Bolt Products Inc. was established in 1947 and operates out of San Dimas, California. Bolt Products is a wholesale distributor of fastening tools both domestically and internationally and is ISO 9001:2015 certified as well as RoHS and WEEE compliant. Bolt Products offers many types of products including bolts and plastic fasteners, nuts, lug nuts, nut retainers, cap nuts, bushings, plugs, ball studs, brass inserts, stud receivers, cable ties, cordgrips, liquid-tight flexible conduits, marking systems, and clips.
-
-
-
-
-
Production Materials, Inc.
Blind Rivets
Company Overview
Production Materials Inc. was founded in 1981 and headquartered near Chicago in Wheeling, Illinois. The company is an ISO 9001:2015 certified distributor of fasteners and related components such as nuts, washers, and bolts to manufacturers as well as individuals. The company provides option types such as material, coating, and threading. The company also prototypes and designs parts and offers customization options on many of the parts available. The company also assists customers in the consolidation and standardization of existing parts along with inventory management assistance.
-
-
-
-
-
Monroe JHP Fasteners, Inc.
Blind Rivets
Distributor Overview
Monroe JHP Fasteners, Inc., founded in 1970, is a supplier of fastening products and services used in the metal fabrication industry. The company, which changed its name from John H. Powers to Monroe JHP Fasteners, Inc in 2000, is based in Walker, Michigan, and supplies customers across the United States, Canada, and Mexico. They supply fasteners, including self-clinching, welding, and miscellaneous. Other products supplied by Monroe JHP Fasteners include rivets, sockets, flat and button head cap screws. The company has partnered with Captive Fastener, Sherex Rivet Nuts, and Industrial Rivet and Fastener Company, which manufacture the products they supply.
-
-
-
-
-
Bay Fasteners & Components, Inc.
Blind Rivets
Distributor Overview
Bay Fasteners & Components, Inc is a premier global distributor of fasteners. They offer an array of products, including large-sized metric fasteners in zinc, stainless steel, and other material variations. Founded in 1992, Bay Fasteners & Components is Florida-based, with warehouses nationwide. The company is committed to sustainability and stocks a variety of fasteners for eco-friendly industries like wind and solar energy manufacturing.
-
-
-
-
-
Goebel GmbH
Rivet tools
Manufacturer Overview
Goebel GmbH is based in Erkrath, Germany, and is a manufacturer of fastening products that was established in 1979 as a subsidiary of the Goebel Group of companies, which specializes in insulation and fastening technologies. The company’s products include self-drilling screws for fastening metal sheets without need for pre-drilling, blind rivets for joining hollow sections or thin-walled materials, and blind rivet nuts for creating load-bearing threads even in brittle materials. The company chiefly serves clients in the automotive, HVAC, and construction industries.
-
-
-
-
-
EJOT
Blind rivet ECORIV
Manufacturer Overview
EJOT, founded in 1922 and headquartered in Bad Berleburg, Germany, is a manufacturer of engineered fastening systems. The company offers a range of products including screws, bolts, nuts, anchors, and storm washers, in which its products serves industries such as construction, industrial, metalworking, and woodworking industries. The company also holds certifications such as IATF 16949 and DIN EN ISO 14001, offering a group-wide, uniform quality and environmental management system to its customers.
-
-
-
-
-
RIVIT S.r.l.
BLIND RIVETS
Manufacturer Overview
Rivit S.r.l. is a manufacturer of sheet metal processing tools and fasteners established in Ozzano dell’Emilia, Bologna, Italy, in 1973. The company offers eyelets for reinforcing sharp edged holes, blind rivets for reinforcement in restricted or hard-to-reach areas, and rapid nuts for holding two or more pieces of sheet metal together. It also offers toggle latches, hose clips, and lockbolts for superior hold over conventional rivets. The company’s products are mainly used by clients in the construction, shipbuilding, and rail industries.
-
-
-
-
-
FAR
Blind rivets
Manufacturer Overview
FAR S.r.l., founded in 1957, is an Italian manufacturer and supplier headquartered in Granarolo Emilia, Bologna, specializing in industrial fasteners. The company’s product lineup comprises aluminum, copper, and steel blind rivets, offering a hundred standard items. It also provides cylindrical and hexagonal blind rivet nuts in various sizes, along with manual, pneumatic, and battery-operated pneumatic tools. The company further develops automatic and semiautomatic riveting systems as well as related control systems.
-
-
-
-
-
C2G - Soudage Innovation
OTHER FASTENERS, CLINCHING / RIVETS
Manufacturer Overview
C2G SOUDAGE INNOVATION, founded in 1986 and located in Montbrison, France, is a manufacturer and supplier of welding equipment and stud fixing solutions. Operating an online store, the company offers welding studs and components, tools and consumables, as well as equipment designed for applications in auto-feed threaded carbon (ATC) welding, drawn arc stud welding, capacitor discharge welding (CDW), and stud inert gas (SIG) welding. It also offers custom-built welding solutions, as well as fastening solutions like welding nuts, blind nut rivet tools, and clinching studs. These products find applications in various industries, including aviation, civil engineering, fine metalworking, food processing, and railway.
-
-
-
-
-
Lobtex Co. Ltd.
Blind rivet
Manufacturer Overview
Lobtex CO. LTD., established in 1888 and headquartered in Higashiosaka, Japan, is a manufacturer of various tools like industrial fasteners, cutting, fastening, work, and electrical equipment tools. The company invented the two-handed hair clipper in 1888 as an alternative to imported clippers and made it popular in the barber industry. In 1928, it started making wrenches, and in 1932, it successfully produced the first adjustable wrench made domestically. It is ISO9001 and ISO1400 certified, and some of its products include hand punchers, riveters, pliers, wrenches, and vises.
-
-
-
-
-
SFS Group Germany GmbH
BLIND RIVET TECHNOLOGY
Manufacturer Overview
Gesipa, founded in 1955 and based in Mörfelden-Walldorf, Germany, is a manufacturer of rivet technology products and solutions. As a member of the international SFS group, Gesipa offers a variety of tools, such as blind rivets, lockbolt setting tools, and various accessories. The company serves four primary customer segments: automotive riveting, industrial applications, and equipment manufacturing. It is ISO 9001 and ISO 14001 certified, and all the German production locations are IATF 16949 certified. The company also provides various services, including regular maintenance, training for the customer’s staff, and firmware updates.
-
-
-
-
-
SIMAF-CFF
Blind rivet-nut type S
Manufacturer Overview
SMAF-CFF, established in 1966 and headquartered in Vélizy-Villacoublay, France, is an off-the-shelf assembly and parts, systems, and industrial fastening solutions manufacturer and supplier. The company provides fastening solutions for metal, wood, and plastics. It has over 55,000 products, including self-tapping screws, flat head crimping nuts with anchor splines, and single or double chevron threaded inserts with or without flanges. Its products are used in office automation, home appliances, and automotive manufacturing.
-
-
-
-
-
NIPPON POP RIVETS AND FASTENERS LTD.
Blind Rivets
Manufacturer Overview
Nippon Pop Rivets and Fasteners Ltd., established in 1968 and headquartered in Chiyoda-ku, Tokyo, is a manufacturer that specializes in fastening solutions. The company offers a range of fastening tools and solutions, including POP nuts, blind rivets, air-hydraulic tools, HB bolts, and more. It also offers open-end rivets, tri-fold expanding shank rivets, self-piercing rivets, plastic clips, and metal clips. Its product enables quick assembly on assembly lines with low-skill workers, helping to reduce costs compared to welding and tapping screws. Moreover, the company is certified with ISO 9001:2015. It serves various industries such as aerospace, automotive, construction, and mining machinery.
-
-
-
-
-
MÜPRO GmbH
Blind rivets
Company Overview
MÜPRO GmbH was launched in 1964 in Hamburg, Germany, and is a manufacturer and supplier of fire protection, fastening, and insulation technologies and systems for the shipbuilding industry. It makes fastening tools like pipe clamps, pipe connectors, sprinkler fastening, support channels, and nameplates, which are shipped to Finland, Switzerland, Norway, Poland, and Portugal. The company also supplies measuring, screwing, and hand tools. Its services include CAD design, analysis programs, pre-assembly, interfaces, project management, and technical consultation.
-
-
-
-
-
Suzhou Rivmate Import & Export Co., Ltd
Blind Rivet
Company Overview
Suzhou Rivmate Import & Export Co Ltd, established in 2000 and based in Jiangsu, China, is a manufacturer and supplier of riveting tools and solutions. Its product portfolio includes a range of rivets such as now-lock blind rivets, mono-lock blind rivets, multi-grip, and uni-grip rivets. They are used in multiple industries including aerospace, automotive, construction, and steel sectors. The company also offers certified products, technical support from a professional team, engineered solutions, and repair services.
-
-
-
-
-
Zygology
Blind Rivets
Company Overview
Zygology is a UK-based distributor for technical fastening products. Zygology has ISO 9001 and UKAS quality management accreditation. Zygology’s product line includes breakstem rivet systems, speed fasteners, structural breakstem fasteners, earthing products, sealing plugs, nutserts, jack nuts, versanuts, POP MFX fasteners, lock bolts, installation tools, PEM assembly solutions, placing tools, Tesa tapes, self-locking nuts, and rivet nuts. Zygology offers engineering design and consulting solutions for customer production line problems. Zygology also offers tool rentals and tool repair.
-
-
-
-
-
ETTINGER GmbH
Blind Rivets
Company Overview
Ettinger GmbH, established in 1964 and headquartered in Munich, Germany, is a manufacturer and supplier of mechanical and electronic components. The company specializes in fastening technology, cable management, and enclosure technology, serving electrical engineering, automation, and medical technology industries. Its products include spacers, screws, and enclosure accessories, conforming to DIN, ISO standards and offering standard parts and customized solutions. Its electromechanical portfolio includes switches, fuses, and insulating bushings essential for battery technology and electric drives. The company's enclosure technology offers enclosures of different materials, handles, and covers, protecting electronic devices in various environments.
-
-
-
-
-
STANLEY Engineered Fastening.
Inventor of the Blind Rivet
Company Overview
STANLEY Engineered Fastening, founded in 1910 and headquartered in Towson, Maryland, is a manufacturer and distributor of fastening and assembly solutions. The company caters to diverse industries, including aerospace, automotive, construction, electronics, and medical, offering a product range that comprises brackets for supporting structures, critical application fasteners like lockbolts and blind rivets, inserts for reinforcement, screws and bolts for fastening, and various types of hand tools for installation and removal of components. The company has multiple locations strategically positioned near its customers worldwide, including the USA, Germany, and Japan.
-
-
-
-
-
Aspen Fasteners Inc.
Blind Rivets
Company Overview
Aspen Fasteners was founded in 1961 and headquartered in Las Vegas, Nevada. Aspen Fasteners is a distributor for industrial fasters. Aspen Fasteners offers an extensive line in both metric and inch standards of anchors, bolts, nuts, screws, washers, rings, pins, pipe plugs, rivets, inserts, rods, studs, spacers, standoffs, panel fasteners, and tools including adapters, drivers anchor setting tools, keys, measuring tools, screwdriver insert bits, and screwdriver power bits. Material types include aluminum, brass, copper, iron, lead alloy, monel nickel copper alloy, nylon, phosphor bronze, plastic, silicon bronze, stainless steel, steel, and zinc.
-
-
-
-
-
SRI-Supplies For Racing & Industry, LLC
Blind Rivets
Company Overview
SRI Supplies was originally founded in Concord, North Carolina in 1997. SRI stands for Supplies for Racing & Industry. SRI is a distributor and outsourcer to many top auto racing teams including Hendrick Motorsports and Team Penske as well as the NASCAR Technical Institute. However, SRI also sells to individuals. SRI supplies many types of products used in not just automotive, but other industrial uses as well as domestically. Product types include abrasives, adhesives, brushes, chemicals, fasteners, lubricants, cleaning systems, paint and related hardware, protective wear, towels, silicones, tapes, threadlockers, tools, and welding.
-
-
-
-
-
Nationwide Industrial Supply
Blind Rivets
Company Overview
Nationwide Industrial Supply was founded in Youngstown Ohio in 2006. Nationwide Industrial Supply is a distributor of industrial equipment, serving both public and private institutions and companies in the United States and overseas. Some of Nationwide’s offerings maintenance, operating products, safety supplies repair products, storage equipment, tubing, pipe, and hose material, electrical and plumbing supplies repair and operating products, storage equipment, safety supplies, material handling equipment, shelving, and work platforms.
-
-
-
-
-
G-Fast Distribution Inc
Blind Rivets
Company Overview
G-Fast has its roots back to 1989 and is based in Chicago, Illinois. G-Fast is a distributor and custom manufacturer of machine tools and equipment. Product offerings include bolts, screws, nuts, rivets, washers, pins, springs, wireforms, retaining rings, clamps, clips, pins, handles, electronic access tools, hinges, knobs, latches, panel fasteners, quick release pins, and wire management. Parts are available across several standards and materials. G-Fast’s services include custom specialized bolts, screws, and nuts, contract manufacturing, CNC machining, and cold heading.
-
-
-
-
-
Trifast plc
Blind Rivets
Distributor Overview
TR Fastenings Ltd. is part of Trifast plc, established in 1973, is a global distributor of industrial fasteners and components, based in the United Kingdom. The company caters to automotive, electronics, and general manufacturing sectors. They supply components to over 5,000 companies globally across a wide range of industries, blending their global manufacturing capability, with strong distribution and logistic support, creates a winning combination. Their Group consists of 34 locations within the UK, Asia, Europe and the USA including 7 high volume sites manufacturing cold forged fasteners and special parts and 3 technical and innovation centres.
-
-
-
-
-
Intafast Limited
RIVETS
Distributor Overview
Intafast Limited, founded in Eastbourne, East Sussex, in 1988 is a distributor of Industrial fastenings, brass threaded inserts, and precision turned parts. The company's product portfolio includes machine & wood screws, Kits, Rivets, Thread forming & Self Tapping and Socket screws. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They also offer services such as Plating, Patching, Kitting, Stock Management and Custom Manufacturing.
-
-
-
-
-
bisco industries
Bllind Rivets
Distributor Overview
bisco industries was founded in Chicago, Illinois in 1973 and now is headquartered in Anaheim, California. bisco industries is a distributor of electronic components and fasteners used for production in aerospace, communication, computer, fabrication, industrial equipment, instrumentation, marine, and military industries. Some of bisco’s product offerings include fasteners such as nuts and washers, hardware such as casters and bearings, door and access hardware including handles and hinges, electronic connectors including circular connectors and terminal blocks, enclosures such as cabinets and rack components, and wires and cables including wire and cable management including sleeving and tubing.
-
-
-
-
-
Crossroad Distributor Source, Inc.
Blind Rivets
Distributor Overview
Crossroad Distributor Source is a master distributor since 2004 supplying industrial and fastener distributors throughout North, Central, and South America, as well as the Caribbean. Their focus is on providing various solutions to both the distributor and the end-user. These solutions include Powercoil® Wire Thread Inserts and Kits for industrial applications, BONDSERT threading solutions for metal, and more. Additionally, they offer a wide range of AFIXX® Blind Rivets & Rivet Nuts in various materials, as well as the Black Book series of technical reference books.
-
-
Blind Rivet Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | RIFSYS TECHNOLOGIES |
10.0%
|
| 2 | Industrial Rivet & Fastener Company |
6.9%
|
| 3 | Product Components Corporation |
6.9%
|
| 4 | Jay-Cee Sales & Rivets, Incorporated |
6.2%
|
| 5 | KD Fasteners, Inc. |
6.2%
|
| 6 | Hanson Rivet & Supply Co,. |
4.6%
|
| 7 | Coburn-Myers Fastening Systems, Inc. |
4.6%
|
| 8 | Vaishnavi Metal Products Corporation Pvt. |
3.8%
|
| 9 | Goebel Fasteners, Inc. |
3.8%
|
| 10 | Doran Specialties |
3.8%
|
Derivation Method
The ranking is calculated based on the click share within the blind rivet page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- EJOT: 3,705
- Lobtex Co. Ltd.: 191
Newly Established Company
- Intafast Limited: 1988 (36 years ago)
- KD Fasteners, Inc.: 1987 (37 years ago)
- C2G - Soudage Innovation: 1986 (38 years ago)
Company with a History
- Bolt Products Inc.: 1947 (77 years ago)
- Product Components Corporation: 1962 (62 years ago)
- Monroe JHP Fasteners, Inc.: 1970 (54 years ago)
Blind Rivet Manufacturers in United States
*Including some distributors, etc.
- Vaishnavi Metal Products Corporation Pvt.
- Industrial Rivet & Fastener Company
- Hanson Rivet & Supply Co,.
- RIFSYS TECHNOLOGIES
- Jay-Cee Sales & Rivets, Incorporated
- Product Components Corporation
- Southco, Inc.
- KD Fasteners, Inc.
- Coburn-Myers Fastening Systems, Inc.
- MF Supply
- Bayou City Bolt & Supply Co., Inc.
- Goebel Fasteners, Inc.
- Benchmark Fasteners
- Texas Specialty Fasteners
- Doran Specialties
- Cook-Leitch Inc.
- Bolt Products Inc.
- Production Materials, Inc.
- Monroe JHP Fasteners, Inc.
- Bay Fasteners & Components, Inc.
Global Distribution of Blind Rivet Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
20 | 64.5% |
Germany
|
3 | 9.7% |
United Kingdom
|
3 | 9.7% |
Italy
|
2 | 6.5% |
France
|
1 | 3.2% |
Japan
|
1 | 3.2% |
China
|
1 | 3.2% |
List of Blind Rivet Products
46 products are listed.
Nissen Rivet
Blind Rivet Aluminum Wide EX type
50+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
Nissen Rivet
Shield Valbrate C-EX type
50+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
Nissen Rivet
Blind Rivet SUS316 Series Standard Type
80+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
Nissen Rivet
Blind Rivet Standard/Closed End Type
50+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
Nissen Rivet
Blind Rivet Standard/Open Type
40+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
Nissen Rivet
High -pressure -pressed valving type liberation EX type
60+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
Nissen Rivet
Enhanced (thick (thick)) Clevervice φ 6.0 NSA-T/NTA-T series
50+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
Nissen Rivet
Blind Rivet SUS316 Series Barving Type
30+ people viewing
High -quality blind tribet that meets a wide variety of industrial needs. Multiple mother materials can be concluded from one side with one action...
