All Categories
This section provides an overview for stainless steel pipes as well as their applications and principles. Also, please take a look at the list of 55 stainless steel pipe manufacturers and their company rankings. Here are the top-ranked stainless steel pipe companies as of December, 2024: 1.OmegaOne, 2.J. McGinley Co., 3.Capital Machine Corp..
Table of Contents
Stainless steel pipes are piping made of stainless steel.
Among stainless steels, austenitic stainless steels such as SUS304 do not rust because the surface is protected by a non-conductive film due to the chromium contained. For this reason, it is used for piping where rust is a problem. Another feature of stainless steel pipe is its resistance to high and low temperatures.
Pipes with bright annealed (non-oxidation annealed) or electropolished inner surfaces can also be used in semiconductor and food factories, where high-purity products are required.
Stainless steel tubing is widely used in factories and plants. Specific applications are as follows:
Stainless steel pipes are widely used in piping where rust is a problem and are sometimes used for pure water and steam piping.
Among stainless steel pipes, those made of austenitic stainless steel do not rust due to the non-conductive coating of chromium. However, corrosion resistance may decrease due to a phenomenon called sensitization caused by heat during welding.
In particular, chromium becomes chromium carbide in the vicinity of the welding area, and there may not be enough chromium to form a non-conductive film. To avoid this phenomenon, heat control during welding is necessary.
In addition, stainless steel pipes that are bright annealed (non-oxidation annealed) or electropolished on the inside have a clean appearance and are free of residual areas that can cause contamination. For this reason, stainless steel pipes are widely used in the food industry and semiconductor plants. If stainless steel pipes are welded incorrectly, liquid accumulation and unevenness in the welding area can occur. Therefore, accurate installation is necessary to fully demonstrate the capabilities of stainless steel pipe.
Stainless steel pipes for piping are stainless steel pipes used for corrosion resistance and low temperature applications. Outer diameters often range from 10.5 mm to 660.4 mm.
On the other hand, stainless steel pipes for general piping are stainless steel pipes used for water supply and hot water supply. They are thinner-walled than conventional stainless steel pipes and are classified into four types: SUS304, SUS315J1, SUS315J2, and SUS316. Outer diameters range from 9.52 mm to 318.5 mm.
Similar to stainless steel pipe for general piping, stainless steel pipe for waterworks is a standard. Stainless steel pipes for water supply are used for water supplies with a maximum working pressure of 1.0 MPa or less.
The wall thickness is the same as that of stainless steel pipes for general piping and is characterized by the two types of SUS304 and SUS316 specified. Pipes with outside diameters ranging from 15.88 mm to 48.60 mm are available.
Stainless steel pipe fittings are parts used to connect stainless steel pipes. By using fittings, the direction of stainless steel pipes can be changed and the size of the outside diameter can be changed.
Typical types of fittings are as follows:
There are two main types of connection methods: welding and screw-in. The welding type includes butt-welding pipe fittings and insert-welding pipe fittings, while the screwing type includes threaded pipe fittings. Threaded pipe fittings are also attractive because they are not fixed by welding and are easy to repair and maintain.
*Including some distributors, etc.
Sort by Features
Sort by Area
JFE Steel America, Inc., a subsidiary of JFE Steel Corporation and established in 1994, is located in North Kingstown, Rhode Island, and is a manufacturer and supplier of flat-rolled steel products. Their product offerings include galvanized steel with a zinc coating for corrosion protection, cold-rolled steel with improved strength and smoother surface, hot-rolled steel used for beams, plates, and bars, stainless steel resistant to corrosion and high temperatures, and alloy steel with enhanced strength, toughness, and corrosion resistance. JFE Steel America's products find applications in diverse industries like construction, automotive, and manufacturing.
Concept Group LLC, established in 1970 and based in New Jersey, USA, is a manufacturer and supplier of vacuum insulation-based products. The product portfolio includes vacuum jacketed hoses, medical device insulation, heat gun safety guards, and custom vacuum insulation. The products are used in many applications which include cryogenic freezers, cleanroom insulation, food-grade insulation, chiller supply, return lines, semiconductor fabrication, and steam transfer. The company offers advanced technology for products with high-temperature insulation, multi-layer insulation, cryogenic insulation, and glass-to-metal seals.
OmegaOne, established in 1995 and headquartered in Willoughby, Ohio, USA, is a manufacturer and supplier of stainless steel fittings for hydraulic hose applications. The company's product range includes flare fittings, flareless fittings, hose-barb fittings, weld fittings, and AMFM Braid Bands, catering to diverse industries such as agriculture, construction, manufacturing, power generation, and transportation. Its services include design and engineering, testing and certification, supply chain management, and technical support. The company is devoted to delivering quality stainless steel fittings, as demonstrated by its ISO 9001:2015 certification.
Brandywine Valley Fabricators, Inc is a manufacturer of structural steel, plate steel, and sheet metal products made from ferrous as well as non-ferrous materials. The company was founded in 1956 and is based in Coatesville, Pennsylvania. Their products are primarily used by tunnel construction equipment manufacturers, structural fabricators, and code tank work contractors. The company offers various onsite capabilities including steel fabrication and machining, welding, pipe and tube bending, structural rolling, and sheet or plate forming. As a full-service metal fabricator, Brandywine Valley Fabricators also performs production operations from prototyping to installation.
J. McGinley Co., established in 2007, and located in Farmingdale, New Jersey, is a manufacturer and supplier of stainless steel tubing. Its products are made from stainless steel material, in which intake tubes, straight or flex tubing, exhausts, bends, elbows and couplers are offered, catering to industries such as automotive, trucking, and busing industries. The company is also capable of double beading, cutting, flaring, bending, as well as welding and fabrication. The materials used in its product is beneficial for applications as it can withstand harmful conditions caused by weather, temperature changes, and corrosive chemicals.
Franklin Sheet Metal, established in Franklin, Massachusetts in 1953, is a manufacturer of metal products, used in industries such as medicine, telecommunications, military, aerospace, electronics, and transportation, Their product portfolio includes sheet metal, diamond plates, flat bar beams and angles that are used as raw materials in manufacturing industries. The company also provides services such as bending and sheet metal forming, waterjet and laser cutting, painting and powder coating and design services.
Base Construction, Inc., founded in 1998, and headquartered in Buena Park, California, is a custom manufacturer specializing in construction and infrastructure solutions. Its range of services includes process piping, concrete foundation, structural steel fabrication, turnkey projects, and mechanical equipment, which are utilized by industries such as aerospace, automotive, chemical manufacturing, food processing, and industrial wastewater treatment. Its services are used for creating and maintaining various industrial facilities, including setting up efficient process systems, constructing solid foundations, fabricating steel for sturdy frameworks, and installing essential equipments.
Established in 2007, 43Forty Fabrication Services is a manufacturer of precision metal components and structures located in the USA. 43Forty Fabrication Services provides superior fabrication solutions for industries such as aerospace, automotive, and construction. Their expertise includes laser cutting, welding, and assembly, delivering custom-made components with extraordinary precision. With a devotion to meeting client specifications while adhering to the highest quality standards, 43Forty Fabrication Services offers comprehensive fabrication services under one roof, streamlining production and ensuring consistent quality. Devoted to innovation, they are a partner in the fabrication industry.
Federal Group USA, founded in 1980, is a manufacturer of custom metal components for various industries, headquartered in Fernand, Michigan, USA. From fasteners to metal stamping and CNC machining, they provide a comprehensive range of engineering and manufacturing services. They are a Thomas Verified Supplier, Quality Systems Basics and ISO 9001:2015 certified company. The company’s capabilities include cold heading, metal fabrication, additive manufacturing, and precision CNC machining. Their product applications cater to diverse industries, from automotive and aerospace to medical and consumer goods.
Penn Stainless Products Inc. is a supplier and manufacturer of stainless-steel flat-rolled flat, bar, structural and tubular products. Penn Stainless Products Inc. was founded in 1949, and located in USA. Penn Stainless serves domestic and international customers in stainless, high-temperature, corrosion, Duplex and PH alloys. They offer many processed capabilities that include level, plate shear, sheet shear, plasma, HQ plasma, laserjet and dynamic waterjet, as well as machine, saw and Amada production cut.
G&J Steel Tubing, Inc. (G&J) is an American contract manufacturer specializing in metal tube fabrication that was originally established in 1976 before their acquistion of Masterson Metal Products and Die Form Tube in the 1990s. The company's primary capabilities include end and hole forming, machining, stamping, finishing, and assembly. These are mainly used to produce metal tube parts for heat transfer, fluid handling, and structural support applications. G&J serves clients across the industrial sector, including Caterpillar, Honeywell, and General Electric.
Feralloy, Inc. is a manufacturer of engineered metal parts and goods based in Cleveland, Ohio. Founded in 1984, the company produces various superalloys, machined bar stock components, and custom metal fabrications for clients in oil and gas, power generation and mining. The company's product lineup includes rolled ring and closed-die forgings, sand and heat-resistant alloy castings, and custom weldments as well as assemblies for clients with niche specifications. Feralloy also offers logistics planning and coordination, distribution and scrap alloy buyback services.
TITAN Metal Fabricators is a designer, manufacturer, and supplier of corrosion-resistant process equipment for industries facing corrosion challenges in Camarillo, USA. Their expertise lies in reactive metals and corrosion resistant alloys such as Titanium, Tantalum, Zirconium, and more. TITAN offers a wide range of process equipment, including Shell and Tube Heat Exchangers, Columns and Towers, Condensers, Reactors, and Pressure Vessels. The company serves diverse industries like Oil and Gas, Pharmaceutical, Steel, and Chemical. Their subsidiary in Wuxi, China, also specializes in Reactive Metal Process Industry Equipment.
Eagle Stainless Tube & Fabrication, Inc. (ESTF) is an American ISO 9001 certified manufacturer of stainless steel and aluminum tubing established in 1982. Based in Franklin, Massachusetts, the company offers fractional, hypodermic, and square/rectangular tubing, pipes, stainless steel wire, and bar stock in various sizes as well as grades. It also offers fabrication services such as CNC and EDM/ECG machining, bending, and laser machining for customers requiring close-tolerance parts or components. ESTF primarily serves clients in the industrial manufacturing, medical, aerospace, and energy sectors.
Steel & O’Brien was founded in 1990 and operates out of Arcade, New York. Steel & O’Brien is a distributor of standard and custom-machined/fabricated fittings and assemblies. Steel & O’Brien serves the food, dairy, beverage, brewery, winery, distilling, biotechnology, pharmaceutical, cosmetic, personal care, extraction, semiconductor, and water treatment industries. Steel & O’Brien offers a range of products including various fittings, valves, actuators, diaphragm valves, pumps, accessories, sight glasses, strainers, filters, tubing, hangers, and others.
Advance Fittings, established in 1985 and headquartered in Elkhorn, Wisconsin, USA, is a manufacturer and supplier of stainless steel fittings and components. The company's product range includes adapters, reducer fittings, elbows, and tees. These products cater to diverse industries such as food and beverage, bio-pharmaceutical, dairy, and personal care. The company’s services comprise design, manufacturing, testing, supply chain management, and technical support. The company is also devoted to delivering quality stainless steel solutions, evident in its ISO 9001:2015 certification. With over 4 decades of experience, the company consistently excels in quality and service.
Reliable Source, Inc. was founded in 2001 and is headquartered in Fontana, California. The company is a distributor of raw and advanced materials and subcomponents for industries including personal electronics, defense, telecommunications, and data centers. The company’s three product sectors include raw materials, manufacturing, and components. The raw materials sector includes alloys, aluminum, nickel, and titanium. The manufacturing sector includes welding, stamping, and grinding of materials. The company’s components sector includes products such as bearings, brackets, fittings, and general tools.
Honeyville Metal, established in Topeka, Indiana in 1951 is a manufacturer of commercial and agricultural galvanized bucket elevators, pit-type incline drag conveyors, and conveyor supports. Their product portfolio includes Bucket Elevators, Bucket Elevator Support Towers Drag Conveyors, Distributors, and Screw Conveyors. Their products are used throughout North America in industries including agriculture, construction. Food Processing, and Recycling and Waste Management. The company also provides dust collection services and organizes dust trade shows.
Advantage Metal Services, Inc. was founded in 1985 and is based in South El Monte, California is a custom fabrication manufacturer and distributor of metallic products for industries including food processing, paper, agriculture, and construction. The company offers shipping to many locations and free local delivery. The company’s services include custom metal fabrication, custom screw conveyor production, flame & hi-definition plasma cutting, saw cutting, and shearing. The company’s end products include carbon steel, stainless steel, aluminum, and expanded metal.
Commercial Metal Exchange, founded in 1984, is a supplier and distributor of metals, alloys-tempers, and forms of stainless steel, nickel, aluminum, copper, and bronze as sheets, rods, coils & strips, bars and tubes used in art sculpture, automotive, government & military, machine shops, roofing contractors and construction industries. The company in Warminster, PA, ensures that the products meet ASTM, AMS, ASME, SAE, and federal standards specifications. The company has no minimum order size and takes one to two days to ship and deliver a product.
Capital Machine Corporation was established in 1946, in California and is known as a supplier of machining services. Besides providing general machine and industrial repairing services the company also offers welding procedures including MIG, TIG, Stick, and Wire GAS, along with the fabrication of Custom Sheet and Structural Metal. Their services list also includes reconditioning, repairing, and rebuilding all types of Gearboxes, Locomotive Turntable Trucks, Drives, and Bearings along with repairing industrial pumps and manufacturing pump components for brands like Worthington. Numerous industries are served by Capital Machine, some of them being Steel Processing, Plastics, Agriculture, Mining, and more.
Roco Steel & Tube Ltd., founded in Lombard, Illinois in 1985 is a supplier of Carbon, Stainless & Aluminum steel. The company's product portfolio includes sheets, plates, bars, rounds, flats and tubing as well as floor plates & bar gratings in copper, brass and bronze. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
Rudy and Associates, founded in Kennedale, TX in 1972 is a supplier of metal tubing. The company's product portfolio includes carbon tubing, alloy tubing, high temperature tubing, titanium and stainless steel tubing. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, warehousing and distribution, Engineering and Customer Support and Custom Manufacturing.
Tech Steel & Materials was founded in 1999 and headquartered in Holbrook, New York. The AS9120B and ISO 9001:2015 certified company is a distributor of metal supply for aerospace, defense, and power generation industries in the United States and overseas. The company provides a range of specialized services and processes including part conversions, machining, grinding, heat treatment, and testing of metals. The company provides custom production of non-standard sizes and alloys of metal tubing, bar, and flat-rolled products.
Aluminum Distributing, Inc. (ADI Metal) was established in 1958 in Fort Lauderdale, Florida where it is still headquartered today. ADI Metal is a distributor of metal and metallic materials for both private and public industrial and maritime industries both in the United States and abroad. ADI Metal is ISO 9001:2015 certified. ADI Metal’s product segments are split into aluminum alloy products, stainless steel products, and other ferrous and non-ferrous metals. These metals include armor plating, brass, bronze, carbon steel, copper, cupronickel, and titanium.
Zhejiang TOP Environmental Technology Co., Ltd., established in 2014 and headquartered in Zhejiang, China, is a manufacturer of industrial environmental protection and explosion-proof equipment. The company offers a wide range of products, including conveyor sieving, powder cleaning, dust free polishing type, floor grinding, and more. It also provides air circulation filtration, vacuum cleaner, and powder bin. Its industrial vacuum cleaner can extract liquids or slurry, which makes cleaning more efficient and productive. The company’s product are certified by ATEX, CE TUV Rhein, and CE DEKRA. It serves various industries such as petrochemical, aerospace, military, 3D printing, and more.
TPS-Technitube Röhrenwerke GmbH, established in 1973 and headquartered in Daun, Germany, is a manufacturer and stockist that specializes in steel and tube products. The company offers a wide range of products, including seamless tubes, flanges, fittings, valves, and heat exchanger tube stock. It also provides oilfield tubing such as tubing, casing, and drill pipe. Its products offer surface finish quality with no weld seam, ensuring high-pressure resistance and a smooth flow of fluids. The company has achieved ISO 9001:2015 and IATF 16949:2016 certification. It serves industries such as oil and gas, chemical, automotive, semiconductor, and more.
Fr. Jacob Söhne GmbH & Co. KG, founded in 1924 and based in Porta Westfalica, Germany, is a manufacturer of modular pipework systems. The company produces products such as pipe bends, transition pieces and adapters, control valves, and inspection pipe components for dust extraction and ventilation systems. With the production facilities, the company manufactures customer-specific products and owns subsidiaries in different countries such as France, Italy, Great Britain, the Czech Republic, and Germany. It also manufactures sheet metal pipes to modular pipework systems.
Brugg Pipes is based in Brugg, Switzerland, and is a manufacturer of pipe system products that was established in 1991. The company specializes in district heating technology products for heating or cooling networks, including pre-insulated pipes, valves, and fittings. It also offers process control technology products, such as sensors and transmitters, and protection system products, such as steel wire ropes and nets. The company is ISO 14001, ISO 45001, and ISO 50001-certified, and serves clients across Europe’s industrial sector.
Alleima, founded in 1862 and based in Sandviken, Sweden, is a manufacturer of advanced stainless steels, special alloys and Industrial heating. The company's range of products includes seamless steel tubes for the chemical and aerospace industries, as well as precision strip steel used in white goods compressors, air conditioners, and knife applications, utilizing over 900 active alloy recipes. It also offers industrial electric heating technology and coated strip steel, which are essential for fuel cell technology in cars, trucks, and hydrogen production. The company's quality system is ISO and ASME certified, along with product approval from Lloyd's Register.
Zhejiang Xindeda Special Pipe Co., Ltd is a Chinese manufacturer of stainless steel (SS) seamless pipes that was established in Wenzhou City, Zhejiang in 1997. The company primarily produces SS seamless pipes various standards including ASTM A312, EN10216-5 and JIS G3459 fabricated from different materials such as TP304, TP316L, and S31803. It also offers SS seamless tee and elbow fittings and caps. The company’s products are commonly used in the energy, petrochemical, and shipbuilding industries, including by companies such as the Hudong-Zhonghua Shipbuilding Group and China National Nuclear Corporation.
Intertubi SPA, established in 1986 and headquartered in Brescia, Italy, is a manufacturer that specializes in the production and distribution of fittings, valves, and flanges. The company offers various products, including butt welding fittings, forged flanges, valves, and more. It also offers threaded fittings and hydroformed tees. Its threaded fittings offer easy installation and disassembly for connecting pipes. The company has achieved UNI EN ISO 9001 and UNI EN ISO 14001 certifications. It serves various industries such as the oil and gas, petrochemical, and energy sectors.
Jiangsu Longyang Metal Technology Co. Ltd., founded in 2006 and headquartered in Jiangsu, China, is a manufacturer of stainless steel welded pipes. The company's main products include stainless steel welded pipes, pressure piping components, and custom fittings, meeting standards that include ASME, BPE, and ASTM.These products are widely used by industries such as construction, energy, and manufacturing. The company also provides clients and third parties with inspection services, including X-ray and hydrostatic testing.
MORY INDUSTRIES INC., established in 1929 and based in Osaka, Japan, is a manufacturer and supplier specializing in stainless steel products. The company's product portfolio includes stainless steel flat bars and round bars, welded carbon steel tubes, tube cutting machines, welded stainless steel pipes and tubes, as well as processed stainless steel tubing products. These products are applicable in various industries, including healthcare, aerospace, automotive, pharmaceuticals, and other sectors. The company holds the JIS Q 14001:2015, ISO 14001:2015, JIS Q 9001:2015, and ISO 9001:2015 certifications for environmental and quality management.
INOXPA, established in 1977 and headquartered in Banyoles, Girona, Spain, is a manufacturer and supplier of stainless steel equipment and systems for various industries. Their extensive product range includes pumps, mixers, valves, and other processing equipment used in sectors such as food, beverage, pharmaceuticals, and cosmetics. INOXPA's products play a crucial role in the processing and handling of fluids and viscous materials, ensuring hygienic and efficient production processes. The company also aims to provide advanced solutions that meet the evolving needs of its customers while adhering to the highest industrial standards.
Scheuch GmbH is a manufacturer of air and environmental control products founded in 1963 and based in Aurolzmünster, Austria. The company's product list includes soundproofing and insulation solutions, evaporative cooler systems, heat exchangers, filter control devices, and thermal sensors for fire or explosion prevention. These are used for dust extraction, air purification, noise protection, and industrial ventilation purposes. The company's products have various applications in cement and lime processing, glass or metal foundries, energy generation, and the petrochemical industry.
Connectors Verbindungstechnik AG is based in Wallisellen, Switzerland, and is a manufacturer of hose connectors, aseptic valves, and sterile couplings established in 1985. The company’s product lineup includes its Sterilock branded sterile coupling system for contamination-free connection and disconnection of fluid lines, its Connlock branded reusable hose connection system that doesn’t require tools, and its Sterivalve branded aseptic valve system for safe and stable control of fluid flows. The company is ISO 9001:2015-certified and primarily serves the pharmaceutical and biotech industries.
Kuze Bellows Kogyosho Co. Ltd., established in 1939 and headquartered in Ishikawa-ken, Japan, is a manufacturer of precision metal components. Its offered metal bellows are integral components for various valves, and the company also produce specialized pipes, including lengthy clean coil tubes that minimize welding points. The company also manufactures stainless steel fittings, catering to a wide range of industries such as semiconductors, pharmaceuticals, food production, petrochemicals, and electric power. The company consists of three independent production divisions at the core of the Kuze Group, and has obtained ISO 9001 certification from Bellows Kuze in 2003.
Octal Pipe Fittings, established in 2010 and headquartered in Anyang, Henan, China, is a manufacturer and supplier of socket weld pipe fittings and holds ISO 9001:2015 certification. The company's product range includes socket weld elbows, reducers, couplings, unions, and flanges, catering to diverse industries such as oil and gas, chemical, petrochemical, power generation, and infrastructure. The company’s services include design and engineering, manufacturing, supply chain management, and technical support. The company is also devoted to delivering quality socket weld pipe fittings.
Valmont Tubing is a steel tubing manufacturer originally founded as Valley Manufacturing Company in 1946 and now operating as a subsidiary of Valmont Industries. Headquartered in Valley, Nebraska, the company produces round, square, and rectangular electric resistance welded (ERW) mechanical steel tubing, as well as custom HSS SuperStruct tubing sections. These have structural and industrial applications for construction projects including in bridges, buildings, towers, and conveyor systems. Valmont Tubing products are available in various sizes, shapes, finishes, and chemistries.
Appleton Stainless, Inc. opened its doors in April of 1999 in Appleton, Wisconsin. The company is a manufacturer of pipe, tubes, fittings, and valves for such industries as food & dairy, biopharmaceutical, wastewater, meat packing, and semiconductors. The company originally manufactured stainless pipe and tube fittings, and has grown to serve many types of connectors and also offers custom services such as polished stainless pipe, large diameter tube, custom cutting of tube & pipe, custom stainless fitting & flanges, and stainless steel fabrication.
AEM & Forge, LLC is a distributor and custom manufacturer of metal raw materials based out of Houston, Texas. The company serves the aerospace, manufacturing, construction, and other industries. The company utilizes various alloys including aircraft standard, nickel, cobalt, copper alloys, and mil-spec materials. The company also provides services including consulting, electropolishing, EMI and RFI shielding, and photo etching. Customized annealing, beveling, deburring, and water jet cutting customizations are also available.
Spee-D-Metals is a manufacturer and supplier of metal products and services and the company was established in 1977 and is based in Willoughby, Ohio, United States. Spee-D-Metals offers a range of metal products, such as aluminum, steel, stainless steel, and alloy steel, in various shapes and sizes. The company also provides custom metal orders, metal cutting services, and online metals for sale. The products are used for different purposes, such as machining, manufacturing, aerospace, transportation, and construction. Spee-D-Metals is loyal to customer satisfaction and quality standards in metal works.
High Performance Alloys, Inc., founded in 1984 and based in Great Lakes, Midwestern US, is a manufacturer and supplier of alloys. The company offers a range of products, including advanced alloys for various industries, such as aerospace, automotive, and oil and gas. The company is known for its quality alloys that provide incomparable strength, durability, and resistance to extreme conditions. They also provide excellent customer services, including technical support and customized solutions, catering to diverse manufacturing needs. High Performance Alloys, Inc. remains enthusiastic to delivering materials that drive progress and efficiency in multiple sectors.
Aerospace Alloys, Inc., established in Bloomfield, CT, in 1980 is a distributor of alloys used in industries including Aerospace, Power Generation, Defense, and Medical. Their product portfolio includes aluminum alloys used in industries such as aerospace, automotive, and construction, titanium used for medical implants, and nickel alloys used in petrochemical, and marine applications. The company also provides services including, kitting, cutting and CNC milling. The company has a national distribution network and a customer support center.
Fleischer Tube Distributors Corp., established in Bay Shore, NY, in 1973 is a distributor of steel, stainless, aluminum, alloys and red metals. Their product portfolio includes various shapes and sizes of Steel Products used for construction, manufacturing, and fabrication applications, Stainless Steel Products used in industries including food processing and architecture and specialty alloys, such as nickel alloys and titanium, used in industries like chemical processing, and power generation.
Yamamoto Special Steel Co., Ltd., established in 1969 with headquarters in Osaka, Japan, is a distributor and supplier of stainless steel and stainless steel piping. The company's products include seamless stainless steel pipes, duplex stainless seamless pipe, duplex seamless fittings, and bright annealed coil. These products have numerous applications and are used in ignition components, heat exchangers, flue gas desulfurization equipment, and chemical processing equipment. It also offers custom stainless steel pipe processing on demand. The company serves markets including food processing, automotive, chemical processing, power generation, and water desalination.
Viega Ltd., a company founded in 1899 and headquartered in Tewkesbury, England, is a manufacturer and supplier specializing in installation technology. The company's product portfolio includes piping technologies, Easytop system valves, and Advantix shower channels. These products are used in various sectors, including the construction industry, industrial plants, and healthcare facilities. The company provides services, including customized solutions tailored to meet the needs of individual customers or projects, technical support, and project planning support while exporting its products to various countries, including the United States, Taiwan, and Morocco.
SteelNow, founded in Houston, Texas, is a supplier of metals such as aluminum, steel and stainless metals. The company's product portfolio includes aluminum products, including sheets, plates, coils, bars, and extrusions, and alloy steel products. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, Engineering Support, national distrubution, technical support, and customer service.
Premier Metal Trading, established in 2014, and located in Chicago, Illinois, is a wholesale distributor and supplier of prime, surplus and secondary metals. It offers a product range including, metals, aluminum, nickels, coils, and carbon steel, where it caters in industries such as construction, manufacturing, transportation, energy, and infrastructure, in which their materials are essential for structural and decorative applications. The company's products are used in applications, including beams, pipes, automotive parts, equipments, and building materials.
Precision Welding & Fabrication, established in 1990, has facilities in Houston, Texas, and is a supplier of full-service welding, fabrication, and installation of process piping and structural steel to the defense, petro-chemical, oil, and gas industries. Precision Welding & Fabrication's specialized products include pipe, clamps, process piping, and ASME pressure vessels. The company also offers in-house drawings, hydro-testing, pipe supports, and skid units, and its dedicated alloy shop allows it to specialize in stainless steel piping, alloy piping, hastelloy, and various other alloys.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | OmegaOne |
6.4%
|
| 2 | J. McGinley Co. |
5.2%
|
| 3 | Capital Machine Corp. |
4.3%
|
| 4 | Advantage Metal Services, Inc. |
3.9%
|
| 5 | Franklin Sheet Metal |
3.9%
|
| 6 | Penn Stainless Products, Inc. |
3.9%
|
| 7 | Roco Steel & Tube LTD |
3.9%
|
| 8 | The Federal Group USA |
3.9%
|
| 9 | Reliable Source, Inc. |
3.4%
|
| 10 | 43Forty Fabrication Services |
3.4%
|
Derivation Method
The ranking is calculated based on the click share within the stainless steel pipe page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
26 | 65.0% |
|
China
|
4 | 10.0% |
|
Germany
|
2 | 5.0% |
|
Japan
|
2 | 5.0% |
|
Switzerland
|
1 | 2.5% |
|
Sweden
|
1 | 2.5% |
|
Italy
|
1 | 2.5% |
|
Spain
|
1 | 2.5% |
India
|
1 | 2.5% |
|
United Kingdom
|
1 | 2.5% |
Nikko Co., Ltd.
30+ people viewing
Last viewed: 9 hours ago
■Supported applications ・Industrial machinery ・For automobiles ・For electronic devices ・For food machinery ・For home appliances ・Parts for fi...
Nikko Co., Ltd.
30+ people viewing
Last viewed: 13 minutes ago
■Supported applications ・High strength ・High durability ・Resource saving
Nikko Co., Ltd.
20+ people viewing
Last viewed: 5 minutes ago
Nikko Co., Ltd.
40+ people viewing
Last viewed: 1 hour ago
■Supported applications ・Corrosion resistance ・Oxidation resistance ・High temperature ・Low temperature
Nikko Co., Ltd.
20+ people viewing
Last viewed: 6 minutes ago
Nikko Co., Ltd.
30+ people viewing
Last viewed: 1 hour ago
■Supported applications ・Corrosion resistance ・Oxidation resistance ・High temperature ・Low temperature
Nikko Co., Ltd.
40+ people viewing
Last viewed: 7 hours ago
■Supported applications ・Building materials ·furniture ・Equipment ·car ・Other standard parts ・Civil engineering ・Architecture ・For other stru...
Nikko Co., Ltd.
50+ people viewing
Last viewed: 1 hour ago
■Supported applications ・Corrosion resistance ・Oxidation resistance ・High temperature ・Low temperature
Nikko Co., Ltd.
30+ people viewing
Last viewed: 3 minutes ago
As a decorative pipe for architecture, such as stair handrails, balconies, rooftop fences, furniture, etc.
Nikko Co., Ltd.
50+ people viewing
Last viewed: 1 hour ago
■Supported applications ・Corrosion resistance ・Oxidation resistance ・High temperature ・Low temperature
Nikko Co., Ltd.
40+ people viewing
Last viewed: 2 minutes ago
As a decorative pipe for architecture, such as stair handrails, balconies, rooftop fences, furniture, etc.
Nikko Co., Ltd.
30+ people viewing
Last viewed: 1 hour ago
■Supported applications ・Corrosion resistance ・Oxidation resistance ・High temperature ・Low temperature
Higuchi Steel Tube Co., Ltd.
10+ people viewing
Last viewed: 17 minutes ago
Higuchi Steel Tube Co., Ltd.
Last viewed: 21 minutes ago
Higuchi Steel Tube Co., Ltd.
10+ people viewing
Last viewed: 22 minutes ago
Higuchi Steel Tube Co., Ltd.
10+ people viewing
Last viewed: 2 minutes ago
Higuchi Steel Tube Co., Ltd.
10+ people viewing
Last viewed: 27 minutes ago
