140 Dispenser Manufacturers in 2024
This section provides an overview for dispensers as well as their applications and principles. Also, please take a look at the list of 140 dispenser manufacturers and their company rankings. Here are the top-ranked dispenser companies as of November, 2024: 1.Safetec of America, Inc., 2.IVEK Corporation, 3.Cecor Incorporated.
Table of Contents
Categories Related to Dispensers
What Is a Dispenser?
A jet dispenser is a device that dispenses a fixed amount of solution from a container. It is also simply referred to as a dispenser.
They are often used in industrial applications, such as applying adhesives to gasket materials or soldering small amounts of solder to electronic circuit boards. However, dispensers for hand washing detergents and alcohol sanitizers are commonly used for household purposes.
Dispensers are also named according to their method. The most common type is the air pulse dispenser, in which the solution is dispensed from a syringe.
Uses of Dispensers
The following are some of the main applications where dispensers are used.
- Automobiles
Automotive parts are made up of many components, which are again made of many small parts. When assembling parts such as instrument panels and bearings, dispensers are used to join the parts together.
Some dispenser molds have a dispensing tip diameter of only a few millimeters so that even the smallest parts can be handled. - Electronic parts
As with automotive parts, many electronic parts are very fine, so dispensers with thin tips are used.
A typical example is soldering on electronic circuit boards. Conventionally, a method called screen printing has been used. Compared to the past, equipment has become smaller, and more precise parts are required. Since it is difficult for screen-printing to support miniaturization due to the shape requirements, soldering by dispensers is used.
Principle of Dispensers
The principle differs depending on the method, but here we introduce the air pulse method, which is a typical dispenser.
The air pulse system consists of an air source, piping, regulator, controller, and syringe.
First, compressed air is released from the air source. The compressed air travels through the piping to the regulator.
The regulator reduces the pressure of the compressed air and sends the air to the controller at a constant and stable pressure. The regulator is connected to the controller because sending compressed air directly to the controller side would result in damage to the components.
The controller regulates the pressure supply to the syringe. The condition of the supply is set by the operator.
When pressure is applied to the syringe, the solution in the syringe is dispensed.
Although the supply pressure is adjusted by the regulator or controller to be constant, in practice, there is a problem. As the solution in the syringe decreases, the dispensed volume also decreases. To reduce the dispensing volume variation, it is necessary to reset the conditions according to the remaining solution volume.
List of 140 Dispenser Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- China
- Czech Republic
- Denmark
- France
- Germany
- India
- Italy
- Poland
- Romania
- Spain
- Switzerland
- Ukraine
- United Kingdom
-
-
-
IVEK Corporation
Methadone Dispensers
Manufacturer Overview
Ivek Corporation, founded in 1979 and based in North Springfield, Vermont, is an ISO 9001 and ISO 13485-certified manufacturer of fluid metering and dispensing systems. The company’s systems are customized for various applications, ranging in the milliliter to nanoliter range. These applications are mainly in the medical and pharmaceutical industries, but the company also serves methadone clinics, battery manufacturers, and food processors. The company has three application laboratories for free analysis to determine the ideal fluid handling system. It also has two solar arrays consisting of over 1750 solar panels that generate 100% of its electrical needs.
-
-
-
-
-
Mile-X Equipment, Inc.
LUBRICATION DISPENSERS, METERS & VALVES
Manufacturer Overview
Mile-X Equipment, Inc., founded in 1979 and located in Coldwater, Ohio, USA, is a manufacturer of automotive and industrial equipment. The product offerings include automotive service equipment, such as tire changers, wheel balancers, and automotive lifts, along with industrial equipment like shop presses and oil filter crushers. These products are designed to improve efficiency, productivity, and safety in automotive repair shops, industrial facilities, and manufacturing plants. The solutions find applications across various industries, including automotive repair, heavy equipment maintenance, metalworking, and manufacturing.
-
-
-
-
Manufacturer Overview
FSI, located in Earth City, Missouri, and established in 1972, is a manufacturer of polyurethane foam system solutions. The company offers an array of products, such as heat-seal coatings, elastomers, geotechnical polyurethane foams, pour-in-place polyurethane foam systems, and rigid molding foam. These products are used in various sectors, including manufactured housing, automotive, boating and marine, commercial refrigeration, and construction. In 2002, the company patented Ecomate blowing agent technology to replace harmful CFCs, HCFCs, and HFCs.
-
-
-
-
-
Hernon Manufacturing, Inc.
Dispensing
Manufacturer Overview
Hernon Manufacturing, Inc., established in 1978, is a manufacturer of adhesive, sealant, and precision dispensing solutions, based in the United States. The company specializes in engineering adhesives and equipment, catering to industries such as automotive, electronics, aerospace, and more. Its cutting-edge products ensure first-rate bonding, sealing, and dispensing applications, enhancing productivity and product credibility for its diverse clientele. Reinforced by partnerships with industry giants, has resulted in a robust product portfolio and numerous industry accolades. Its extensive network, global reach, and decades of experience make it a preferred choice for businesses seeking advanced adhesive and dispensing solutions.
-
-
-
-
-
Henkel Corporation
Dispense Systems
Manufacturer Overview
Henkel Corporation is an American manufacturer specializing in sealants, adhesives, and coatings since its establishment as a subsidiary of German multinational company Henkel AG & Co. KGaA in 1974. Based in Rocky Hill, Connecticut, the company produces various oleochemicals, surfactants, and chemical intermediates used in the production of brand name industrial adhesives, skincare, and surface treatment products. Some of these include Technomelt, Purex, Bonderite, and Loctite. Henkel Corporation is divided into separate Adhesive Technologies, Beauty Care, and Laundry & Home Care business units. The company primarily supplies the product formulation needs of clients in the consumer goods and industrial sectors.
-
-
-
-
-
ROSS Mixers
High Speed Disperser
Manufacturer Overview
ROSS Mixers, founded in Hauppauge, New York, in 1842 is a manufacturer of mixing, blending, dispersion and drying equipment for chemical, food, and pharmaceutical. The company's product portfolio includes Blending Equipment, Control Systems, Dispersion Equipment, Drying Equipment, and Pressure Vessels, Storage Tanks and reactors. Their products are used in industries such as Food and Beverage Processing, Pharmaceutical and Biotechnology, Chemical and Petrochemical, , and healthcare. The company operates from eight facilities located in the USA, China and India.
-
-
-
-
-
Nordson Corporation
AD Series Handguns
Manufacturer Overview
Nordson Corporation, established in 1954 and headquartered in Westlake, Ohio, USA, is a global manufacturer and marketer of differentiated products for precision dispensing and processing. They cater to diverse end markets, including packaging, electronics, medical, energy, and transportation. With over 6,800 employees across more than 35 countries, Nordson offers solutions for bonding, adhesive dispensing, fluid management, test and inspection, and UV curing. Their product line includes dispense tips, syringe barrels, dispensers, srapy valves, fluids, and syringe systems among others. Comprised of eight divisions, they are ISO 9001:2015 certified and provide systems, precision technology, and after market parts.
-
-
-
-
-
Metcal, a Brand of OK International
Dispensers
Manufacturer Overview
Metcal, founded in 1982 and headquartered in Cypress, California, is a brand of OK International and a manufacturer of technology products across fume extraction, convection rework, and hand soldering. Its products include soldering systems, dispensers, and fume extraction systems, and it serves global OEM and electronics assembly customers in several industries, such as aerospace, automotive, and medical devices. The company’s SmartHeat technology uses a self-regulating tip and guarantees soldering temperatures within the engineering specifications. Its temperature-controlled soldering iron systems allow temperature control without changing the tip or cartridge, eliminating the need for more tips while soldering at different temperatures.
-
-
-
-
-
3M
Dispenser
Manufacturer Overview
3M Company was founded in 1902 and is headquartered in St. Paul, Minnesota. 3M provides diversified technology services globally. 3M operates through four segments: Safety and Industrial, Transportation and Electronics, Health Care, and Consumer. The Safety and Industrial segment offerings include industrial abrasives, masking, and natural and color-coated mineral granules for shingles. The Transportation and Electronics segment offerings include ceramic solutions, light management films, and electronics assembly solutions. The Healthcare segment offerings include wound care, dentistry and orthodontia solutions, and filtration and purification systems. The Consumer segment offerings include consumer bandages, picture hanging, and stationery products.
-
-
-
-
-
Globe Scientific Inc.
Bottle Top Dispensers
Manufacturer Overview
Globe Scientific Inc. is an American ISO 9001 certified manufacturer of laboratory equipment that was founded in 1983 before its acquisition by the GSI group in 2022. Headquartered in Mahwah, New Jersey, the company produces laboratory benchtop equipment, glassware, and plasticware including centrifuges, vials, microscopes and beakers. These are primarily used for chemical testing or analysis, research, and quality control applications. Globe Scientific also offers contract manufacturing and packaging services for customer projects and equipment orders. The company chiefly serves clients in the education, healthcare, biotechnology, and laboratory sectors.
-
-
-
-
-
EXACT Dispensing Systems
Circular Bead Dispensing System
Manufacturer Overview
EXACT Dispensing Systems, established in 1978 and headquartered in Newcastle, Maine, is a manufacturer of precision meter-mix and dispense systems for a variety of manufacturing markets worldwide12. It offers a full line of meter mix dispensing equipment and adhesive dispensing systems. Some of its products are piston meter dispensing systems, gear pump dispensing systems, and bead dispensing systems. These systems are used for applications including potting and encapsulation, bonding and sealing, and molding, serving industries like general manufacturing, and electronics.
-
-
-
-
Manufacturer Overview
Graco Inc. Was incorporated in 1926 and is headquartered in Minneapolis, Minnesota. The company is a designer, marketer, and manufacturer of systems and equipment for the movement, control, dispensing, and spraying of fluid and powder materials to global customers. The company operates in three segments: industrial, process, and contractor. The industrial segment designs proportioning systems for pumping sealants, adhesives, and other coating materials. The process segment designs pumps used in water, wastewater, and petroleum industries. The contractor segment offers paint and viscous coating sprayers.
-
-
-
-
-
Eppendorf North America
Bottle-Top Dispenser
Manufacturer Overview
Eppendorf, founded in 1945 with headquarters in Germany, is a manufacturer and supplier of laboratory equipment, instruments, and consumables. The company's product line includes pipettes, pipette tips, centrifuges, mixers, and ultra-low-temperature equipment. Eppendorf's products are used in academic and commercial research laboratories as well as in the pharmaceutical, biotechnical, chemical, and food industries to perform clinical, environmental, process analysis, and production quality assurance. The company also offers services for liquid, sample, and cell handling in laboratories worldwide.
-
-
-
-
-
Start International
MANUAL LABEL DISPENSERS
Manufacturer Overview
Start International, started in 1981 and based in Addison, Texas, is a manufacturer of taping and labeling solutions and makes its products in the USA, Asia, and Europe. The company stocks products such as tape dispensers, non-adhesive cutters, and label dispensers, and it owns brands such as labelmoto, TheTapeDispenser, and TheLabelDispenser. Cyli-Size is the latest brand introduced in 2008, and it also sells other specialty products like copper thickness testers, pocket microscopes, and graphic art loupes. The company serves industries such as shoe manufacturing, automotive, and packaging and has over ten trademarks in the USA and the EU.
-
-
-
-
-
GERMisept
Dispensers
Manufacturer Overview
GERMisept, headquartered in Cochran, Georgia, is a manufacturer and supplier of disinfectant products. Their product range includes hand sanitizers, surface disinfectants, protective goggles, face shields, and sanitizing wipes which are essential for maintaining cleanliness and hygiene in healthcare facilities, schools, offices, and public spaces. The company also undertakes research on new product designs and supplies both international and domestic locations as well as private label services as part of their offerings.
-
-
-
-
-
Cecor Incorporated
Dispensers
Manufacturer Overview
Cecor Incorporated, founded in 1955 and headquartered in Belleville, Wisconsin, is a manufacturer of industrial maintenance equipment used by the machining industry. Some of the products offered by the company include Sump Shark sump cleaners, industrial dumping carts, and CNC cutting fluid dispensers. These products are designed to help in handling metalworking maintenance faster, safer, and smarter. The company also offers a full line of parts and accessories to support and enhance its products.
-
-
-
-
-
Hapco
Dispensers
Manufacturer Overview
Hapco, Inc. is an ISO 9001:2015 certified manufacturer of thermoset polyurethanes and epoxies for use in various applications. Founded in 1969 and based in Hanover, Massachusetts, the company specializes in producing plastic extruders, pumps, power generators and welding tools for clients in oil and gas drilling, industrial manufacturing and commercial roofing. Aside from manufacturing, the company also offers custom product design and engineering, repair and calibration services for customers with niche use cases. Hapco's clients include the Ford Motor Company, General Electric and Boston Scientific.
-
-
-
-
-
Safetec of America, Inc.
Dispensers
Manufacturer Overview
Safetec of America, Inc. is a manufacturer and supplier of infection control, first aid, and OTC products and the company is based in Buffalo, New York, and was established in 1991. Safetec offers a range of products, such as hand sanitizers, disinfectants, spill kits, wound care, and personal care items. The products are used for various purposes, such as preventing the spread of COVID-19, protecting workers from hazards, and providing medical care. The products are made in the USA and meet the quality standards of the FDA and EPA.
-
-
-
-
-
T/J Fabricators, Inc.
Dispensers
Manufacturer Overview
T/J Fabricators, Inc., established in 1967 and headquartered in Addison, Illinois, is a manufacturer specializing in precision sheet metal fabrications. The company has been delivering sheet metal services across Illinois, Indiana, and the United States. Its product offerings encompass an array of services, including precision laser cutting that grants intricate shapes, patterns, and logos on steel, aluminum, and stainless steel. The company's capabilities extend to metal fabrication, welding, in-house engineering, and complex forming, producing cabinets, enclosures, structures, and more.
-
-
-
-
-
Marlin Steel Wire Products
Dispensers
Manufacturer Overview
Marlin Steel Wire Products LLC, founded in 1968, is a manufacturer of custom metal forms, currently based in Baltimore, Maryland, USA. Their product range includes stainless steel parts washing baskets, racks, S-hooks, and sheet metal material handling containers. The company holds an ISO 9001:2015 certificate from the International Quality Registrars (IQR) Corporation for the "Design and Manufacture of Wire and Sheet Metal Products and Specialty Tooling. They cater to various industries, such as aerospace, defense, medical, food processing, and automotive. They provide over 40 finishes, including Electropolishing, Teflon, Nylon, Halar, Powder, and Plastic coating.
-
-
-
-
-
Wayne Chemical Inc.
Dispensers
Manufacturer Overview
Wayne Chemical Inc. is a supplier and manufacturer of production chemicals and sanitation solutions for the food processing industry. Its offerings include sanitation chemicals like cleaners, sanitizers, and degreasers, as well as sanitation equipment like foamers and washers, which assist in applying chemicals effectively. Production chemicals, such as preservatives and flavor enhancers, and custom equipment tailored to clients' unique requirements, encompassing washers, conveyors, and more, are also offered. Its diverse array of solutions, meets the HACCP food safety standards, and ensures efficient and hygienic operations in the food processing sector.
-
-
-
-
-
Dynamic Automation & Robotics
Dispensers
Manufacturer Overview
Dynamic Automation & Robotics, is a manufacturer of custom automation and robotic equipment such as automated scientific systems, solid drug applications, turnkey automation systems, measurement systems, and dispensing devices used in medical, pharmaceutical, electronics, consumer products, and dental industries since 1986 Based in Simi Valley, CA, the company offers services such as automation consulting, machine retrofits, inspections & measurements, build-to-print projects, and validation of the equipment. The company won the Fanuc ASI (authorized system integrator) Sales Award in 2018.
-
-
-
-
-
Lapmaster International, LLC
Dispensers
Manufacturer Overview
LAPMASTER WOLTERS’s roots go back as far as 1804 with the founding of Peter Wolters. Lapmaster was founded in Chicago in 1948 as a manufacture of lapping and polishing machines for the mechanical seal market, Lapmaster has grown to a worldwide solution provider for more than 20 industries like precision optics and advanced materials. Lapmaster serves many industries including automotive, semiconductor, electro optics, and medical devices. Lapmaster also sells many consumables including abrasive powders, lapping compounds diamond lubricants, and composite plates. Products include lapping, polishing, bore honing, buffing, grinding, and special purpose machines.
-
-
-
-
-
Riverside Automation
Dispensers
Manufacturer Overview
Riverside Automation, located in Rochester, NY, is a manufacturer of custom automation equipment since 1992. They provide a comprehensive service that covers the entire project, from the initial concept to the installation stage. The company offers various services, such as lean cell equipment, dial rotary automation, linear transfer automation, and power and free automation. Using CAD/CAM technology and on-site engineering, they can offer a quick turnaround for projects in various industries.
-
-
-
-
-
Gluefast Co., Inc.
BATCHMETRIX dispenser station
Company Overview
Gluefast Co., Inc. is a manufacturer of gluing equipment, glues, and adhesives that was established in 1939 in Neptune, New Jersey, USA. The company’s products include water based adhesives, hot melt adhesives that activate when heated, and pressure sensitive adhesives that bond optimally under weight or mechanical pressure. It also offers glue guns, as well as manual adhesive applicators such as films, sprays, and beads. The company’s products are commonly used in custom graphics applications, industrial packaging operations, and woodworking processes.
-
-
-
-
-
Techcon
Manual Syringe Guns
Company Overview
Techcon is based in California, USA, and is a manufacturer and supplier of fluid and adhesive dispensing products that was established in 1961 as a brand of OK International, Inc., a subsidiary of the Dover Corporation. The company primarily produces fluid dispensing products such as consumables or software for smart dispensers. It also offers components for dispensing systems such as dispensing robots, smart dispenser controllers, and syringe barrels. The company’s products are used mainly by clients in the electronics industry, and in the industrial automation and industrial manufacturing sectors.
-
-
-
-
-
PVA
ST100-S
Company Overview
Precision Valve & Automation, established in 1992 and headquartered in New York, US, is a supplier that provides fluid dispensing and selective conformal coating solutions to global manufacturers. The company offers a range of products, including 3D printing, bonding, dam and fill, thermal interface materials, and more. It also manufactures UV curing spot, flood, and conveyor light curing systems. Its products are biodegradable and water-soluble, making it a sustainable alternative to traditional plastics. Moreover, the company has achieved ISO 9001 certification. Its products are used in various industries, including oil and gas, construction, textiles, adhesives, and more.
-
-
-
-
-
SMTmax
Automatic Paste Dispenser
Company Overview
SMTmax, headquartered in California and established in 2009, is a manufacturer and supplier of SMT tools and equipment for both prototyping and production purposes. Its product offerings encompass pick and place machines, stencil printers, BGA stations, reflow ovens, station parts, and have expanded into the dental clinic and lab fields. The company also provides additional services such as circuit board production, electronic test and measurement instrument manufacturing, customized electronic hardware design, and software development, making them a comprehensive solution for various electronic and manufacturing needs.
-
-
-
-
-
Fisnar
Hand Dispensers
Company Overview
Fisnar, founded in 1986 and currently a subsidiary of Ellsworth Adhesives Ltd., is an American manufacturer and supplier based in Germantown, Wisconsin, providing fluid dispensing systems and equipment. The company develops robotic fluid dispensing systems, offering benchtop and gantry-style options for various assembly fluids, such as adhesive, cyanoacrylate, and silicone. The company also offers manual fluid dispensing systems, along with electric pumps and reservoir tanks. A range of dispensing valves, such as diaphragm valves, and related accessories are also available. These products find applications in various industries, including aerospace, alternative energy, and medical devices.
-
-
-
-
-
BrandTech Scientific, Inc.
Dispensers
Company Overview
BrandTech Scientific was founded in 1996 and is headquartered in Essex, Connecticut. BrandTech Scientific supports laboratory sciences as a distributor for German-made supplies in Canada and the United States. BrandTech Scientific’s products include categories such as liquid handling including pipettes and instrumentation, life science such as PCR products and microplates, laboratory vacuum such as rotary vein pumps, lab support jacks, lab ware such as test tube racks, volumetric lab ware hardware and software, and lab rat gear, as well as offering vacuum pump selection guides.
-
-
-
-
-
Pexco LLC
Foam Dispensing Equipment
Distributor Overview
Pexco LLC, based in Atlanta, Georgia, has been an industrial custom supplier offering design, engineering, manufacturing, and fabrication services of extruded plastics used for manufacturing lighting, fence, and traffic safety products since 2018. Traffic safety products include barricades, guardrail reflectors, barrier reflectors, curb systems, and lane separators. The company manufactures standard and custom-extruded plastic products from polyethylene, polypropylene, polyurethane, polysulfone, and PVC materials. The raw material are used to manufacture DIP tubes, spiral wraps, PVDF, and nylon tubings applied in automotive and manufacturing industries to protect hydraulic hoses and in computing and electrical industries to organize the wires.
-
-
-
-
-
RAASM S.p.A.
Grease dispensers
Manufacturer Overview
Raasm S.p.A., founded in 1974 and headquartered in Zeno di Cassola, Italy, is a manufacturer of fluid management technologies and solutions. The company offers thousands of products, including pneumatic pumps, electro-fluidic slip rings, and wheel-mounted stainless steel cleaning spray foamers. These products are used for various applications across automotive services, agriculture, and mining. Its products are available in more than 100 countries, and its North American headquarters and warehousing operations are located in Charlotte, North Carolina.
-
-
-
-
-
TECALEMIT GMBH & CO. KG
BIODIESEL DISPENSER
Manufacturer Overview
TECALEMIT GMBH & CO. KG, established in 1922 and headquartered in Flensburg, Germany, is a manufacturer and supplier specializing in fluid handling systems. The company's product portfolio includes hand pumps for thin fluids, air-operated diaphragm pumps, and centrifugal pumps. These products find application in various sectors, including manufacturing, agriculture, and transportation and logistics. The company offers various services, including technical support, training, and provision of spare parts. Additionally, the company is ISO 9001 certified for quality management systems.
-
-
-
-
-
Sulzer Ltd
Cartridge systems and applicators
Manufacturer Overview
Sulzer Ltd. is a fluid engineering and chemical processing solutions manufacturer originally founded in 1775. The company has been headquartered in Winterthur, Switzerland since 1834, maintaining a network of 180 manufacturing facilities and service centers around the world. The company has an expansive product portfolio including distillation and absorption columns, agitators, reactors, crystallizers, and polymerization systems. These supply clients in the metals, plastics, chemicals, power, and pharmaceutical industries. Sulzer Ltd. also offers a range of services, such as testing and diagnostics, prototyping, retrofitting, and upgrades, including technical training with long-term support for their customers.
-
-
-
-
-
FoodsFact
DISPENSERS
Manufacturer Overview
FoodsFact is a manufacturer of bakery and confectionery production machinery that was established in 2018 in Varna, Bulgaria. The company’s product lineup includes filling conveyor machines for filling doughnuts or mini pies, packaging machine feeders, and cooling conveyors for rapid cooling of baked or deep fried products in a production line. It also offers cooking steam boilers, electric melters, and rotary conveyors. The company’s products are used by clients in snack foods, confectionery, and bakery operations.
-
-
-
-
-
UVEX ARBEITSSCHUTZ GmbH
Hearing protection
Manufacturer Overview
Uvex Arbeitsschutz GmbH, started in 1926 and situated in Furth, Germany, is a manufacturer of a large array of personal protective equipment. The company manufactures safety glasses, safety helmets, safety gloves, and safety shoes. It also fabricates respiratory protection, hearing protection, functional underwear, and disposable protection coveralls. Its safety glasses feature lightweight safety spectacles with contoured anti-fog and scratch-resistant lenses for a great fit on narrow or wider faces. It serves various industries, including automotive, construction, health care, metalworking, and service providers.
-
-
-
-
-
Adam Pumps S.p.A.
EASY TECH
Manufacturer Overview
Adam Pumps S.p.A. was founded in 2010 and is headquartered in Campogalliano, Italy is a manufacturer of pumps and meters for gasoline. The company offers an array of products including oil flow display meters, diesel fuel transfer pumps, and transfer kits for transporting urea. These products find applications in waste and management plants, petrochemical industries, and oil and gas refineries. Its philosophy is to ensure continuous improvement of the products, and fast response to the customer’s requirements.
-
-
-
-
-
Twin Engineers Pvt Ltd.
Minimix-Epoxy Dispensing Systems
Manufacturer Overview
Twin Engineers Pvt. Ltd., established in 1993 and headquartered in Maharashtra, India, is a manufacturer of machines and automation solutions. The company specializes in meter mix dispensing, automotive fluid filling, and robotic dispensing. It provides solutions for various industries, including automotive, electronics, and packaging. Its solutions are famous for robotic sealant dispensing machines and engine components, catering to a wide range of oils and fluids. The company offers initial customer needs assessment and full-scale production commissioning, with a global dealer network in Turkey, Russia, and the UAE.
-
-
-
-
-
SAMOA Industrial, S.A.
Dispenser
Manufacturer Overview
Samoa Industrial, S.A., established in 1958 and headquartered in Asturias, Spain, manufacturer that develops products for fluid handling and management during the maintenance of vehicles, infrastructures, and industrial machinery. The company's product line includes pneumatic piston pumps, manually operated pumps, battery grease guns, used fluid equipment, meters, and more. It also offers kits and packages that include electric pumps, outlet and suction hoses, delivery guns, and suction accessories. Its lever-action grease pumps have a cast iron head for maximum durability. It serves industries such as automotive, construction, agriculture, mining, and more.
-
-
-
-
-
TZTEK Technology Co., Ltd.
Dispenser
Manufacturer Overview
TZTEK Technology Co. Ltd., established in 2005 and based in Suzhou, China, is a manufacturer of vision equipment and intelligent driving solutions. The company produces vision metrology equipment, vision process equipment, and intelligent driving vehicle solutions, catering to various sectors like consumer electronics, semiconductors, and photovoltaics. Its R&D emphasizes on machine vision algorithms, industrial data platforms, and drive-control technologies. Its contributions to metrology equipment and intelligent driving technologies have earned it numerous awards, including the National High-Tech Enterprise and Jiangsu Provincial Science and Technology Progress Award.
-
-
-
-
Manufacturer Overview
DELO Industrie Klebstoffe GmbH & Co. KGaA, established in 1961 and headquartered in Windach, Germany, is a manufacturer of industrial adhesives and dispensing equipment. The company mainly offers adhesive solutions for electronics, automotive, aerospace, and medical industries, as well as bonding, curing, despensing, and sealing solutions. It has earned numerous certifications and awards for its adherence to quality, including ISO 9001;2015, and ISO 14001;2015 and various industry-specific certifications. Its adhesives find applications in industries with short production cycle times and intricate component joining requirements.
-
-
-
-
-
Three-Tec GmbH
FEEDING SYSTEMS
Manufacturer Overview
Three-Tec GmBH, founded in 2000 and based in Seon, Switzerland, is a manufacturer of dosing systems, extruders, and process equipment used in process engineering. Its portfolio includes feeding systems, extruders, and process equipment, and customers use its products in 40 countries on six continents. The company also sells special machinery such as isolator high containments, filling systems, and four screw feeding units. It allows customization and can use different drives, scales, and controls to configure the feeding for specific needs. Its extruders have different screw diameters ranging from 5 to 100mm and L/D ratios from 15:1 to 60:1.
-
-
-
-
-
NOMATECH s.r.o
VOLUMETRIC DOSING UNITS
Manufacturer Overview
Nomatech S.R.O., founded in 2007 and headquartered in Prague, Czech Republic, is a manufacturer of packaging and material handling equipment. The company's products include packaging vessels for powders, liquids, and piece commodities, bagging machines, and horizontal packaging machines. It also offers robotic solutions and complete packaging lines, which are custom-planned to meet client requirements. It also supplies spare parts and offers initial repair instructions via online video calls; however, if the repair fails, it guarantees a service trip within 48 hours.
-
-
-
-
-
Tintometer GmbH
Powder dispenser PD 250
Manufacturer Overview
Tintometer GmbH is a manufacturer of water testing and color measurement products founded in 1885 and headquartered in Dortmund, Germany. The company offers water testing solutions, including a range of colorimeters, comparators, and water testing kits. It also provides visual and automated color measurement instruments, such as spectrophotometers, colorimeters, and color comparators. The company’s products are sold under the trademark Lovibond in over 140 countries worldwide. It adheres to ASTM, DIN, AOCS, and ISO international standards, serving various industries, including water treatment, food and beverage, oils, and more.
-
-
-
-
-
Technowagy
Two-flow weighing dosing machine
Manufacturer Overview
Technowagy, founded in 2002 and headquartered in Nadiina, Ukraine, is a manufacturer and developer specializing in weighing and dosing equipment. The company's products include railroad track scales, automated process control systems, and laboratory balances. These products are used in research laboratories and the packaging and quality assurance industries. Additionally, it offers services such as equipment calibration, staff training on the use of the technology, and installation assistance. Its calibration laboratory has been accredited by NAAU to calibrate equipment measuring mass and related quantities.
-
-
-
-
-
DANA – TECHNOLOGY APS
Salt dispencer
Manufacturer Overview
DANA-Technology ApS is a Danish manufacturer based in Tommerup Stationsby, South Denmark, developing machinery and equipment for the food and pet food industry. The company’s flagship product is the rotary disc texturizers, designed to transform emulsified meat into textured fibrous meat, such as beef, fish, and machine-separated meat, by coagulating proteins and carbohydrate sources. The company also develops machines with diverse capabilities, including dry or liquid filling, extruding or forming, and heat or cool treatment.
-
-
-
-
-
Ear-Flap
Automatic top sheet dispenser
Manufacturer Overview
Ear-Flap, founded in 2001, is a manufacturer headquartered in Barcelona, Spain, engaging in the packaging industry. The company’s portfolio includes packaging machinery and end-of-line systems, covering semiautomatic and automatic case formers, single and multi-format case sealers, as well as turntable pallet and orbital wrappers. It also offers complete lines and packaging solutions, including automatic forming systems, carton and case packer systems, as well as palletizer systems. Supported by manufacturing facilities in Europe, Asia, and the United States, the company serves customers in over 70 countries.
-
-
-
-
-
FourPack
ANCILLARY EQUIPMENTS
Manufacturer Overview
Liveflow SRL (the primary packaging company of Livetech Group), originally founded as Four Pack 2011 and headquartered in Settimo Torinese, Italy, is a packaging machines and systems developer and manufacturer. The company's products include horizontal packaging machines, wrapping machines, and stack pile loaders, all which are readily integrated with automated product feeding systems. It also supplies custom robotic secondary packaging lines and modular turnkey packaging systems. The company's products have applications in storage and transportation, as well as food processing applications such as biscuit roll wrapping and wrapping individual food products and product groups.
-
-
-
-
-
INTEGRA Biosciences AG
Microplate Dispenser
Manufacturer Overview
INTEGRA Biosciences AG, established in 1965 at Switzerland is a global manufacturer of advanced pipetting products for research, diagnostics and quality control requirements. The company, specializing in liquid handling and media preparation solutions produces advanced and unique pipetting products such as manual pipettes, electronic pipettes, pipetting robots and pipette controllers. The products are used in fields such as cell biology, drug discovery, diagnostics, microbiology and genomics. The pipettes are able to enhance productivity, flexibility and improve the reproducibility of diagnostic results across various workflows. The robotic pipettes offer more flexibility without any dedicated professional.
-
-
-
-
-
Systec GmbH & Co. KG
Dispenser
Manufacturer Overview
Systec GmbH & Co. KG, founded in 1994, is a manufacturer of laboratory sterilizers, autoclaves, and media preparators based in Hessen, Germany. It offers vertical floor-standing autoclaves, horizontal bench-top autoclaves, and double-door autoclaves, along with media preparators, plate pourers, and tube fillers. These products comply with international production and quality requirements, including DIN EN ISO 9001 and DIN EN ISO 14001. The company also provides services for its products, including installation and start-up, qualification and validation, after-sales service, and training. It serves the needs of modern laboratories, science and research, biotechnology, pharmacy, and production.
-
-
-
-
-
Mettler-Toledo
Disp-X Bottle Dispensers
Manufacturer Overview
Mettler Toledo was incorporated in 1945 in Toledo, Ohio, and is today headquartered in Greifensee, Switzerland. Mettler Toledo is a manufacturer of various analytical instruments for use in laboratories, industrial and manufacturing, and food retailing applications to customers globally. Mettler Toledo offers many products across product lines for uses such as product inspection, process analytics, jewelry scales, moisture analyzers, and software for laboratory weighing. Mettler Toledo also offers numerous accessories such as density kits, hands-free accessories, weighing tables, and weight accessories.
-
-
-
-
-
Capp-Plast S.r.l.
DISPENSERS
Manufacturer Overview
Capp-Plast S.r.l., established in 1960 and headquartered in Prato, Italy, is a manufacturer of large polyethylene storage units and pallets. The company specializes in recovering and recycling materials and produces bottles, bags, and reels. It offers solutions for the packaging industry, including the injection and bottles departments, which serve the cosmetics, chemical, and pharmaceutical industries. It operates a state-of-the-art regeneration department to manage scrap and discards from its three production processes. The company avoids PVC, uses LED and chrome-free inks for food products, and uses polyethylene in accessories and storage unit walls to enhance recycling.
-
-
-
-
-
DAV Tech Srl
Dispensing systems for 2K fluids
Manufacturer Overview
DAV Tech Srl is a manufacturer of fluid dispensing systems and components that was established in 2004 in Montecchio Maggiore, Veneto, Italy. The company primarily offers stepper motor, electric, and pneumatic dispenser models with various functionalities including progressive cavity and time pressure features. It also offers controllers, valves, and related accessories for dispensing a range of fluids from oils to pastes. The company’s products are commonly used by client manufacturers of pharmaceuticals, cosmetics, and home maintenance supplies.
-
-
-
-
-
Ningbo Jewin Electrical Appliances Co.,Ltd.
Water Dispenser
Manufacturer Overview
Ningbo Jewin Electrical Appliances Co. Ltd., established in 1979 and headquartered in London, is a manufacturer and exporter of household appliances. The company produces air fryers, coffee machines, and water purifiers. Its air fryers help in healthy and oil-free cooking, and water purifiers and filters for clean and safe drinking water. It also provides meat grinders, yam pounders, and refrigerators for food storage. With an in-house team of designers and engineers emphasizing OEM and ODM projects, the company's products are used in markets across America, Europe, and Asia.
-
-
-
-
-
Mahr Inc.
MarMax Meter Mix Dispense Machines
Manufacturer Overview
Mahr Inc., founded in 1861 and located in Rhode Island, United States, is a supplier of production metrology, rotary stroke bearings, gear metering pumps, and meter mix dispense technology. The company offers a range of products, including handheld gages, stereo-zoom microscopes, planetary spinning pumps, spin finish metering pumps, and the N500 ball cage, that cater to various industries including automotive, aerospace, medical, and energy. Mahr Inc.'s metrology systems include coordinate measuring machines, optical measuring machines, contour measuring machines, and gear measurement systems to meet the stringent requirements of industries.
-
-
-
-
-
Nicem SPA
ENAMEL DISPENSERS
Manufacturer Overview
Nicem, established in 1970 and headquartered in Bergamo, Italy, is a manufacturer and supplier of industrial machines and plants. The company provides various solutions that include enameling, vibro-fin hinging, and furnaces for abrasive disks. Its individual products include silicone rubbers for spin casting, glass dryers and polishers for professional catering services, and enamel ovens. It welcomes consultation on complete industrial or commercial processing lines and can provide custom-designed, engineered, and manufactured turnkey systems. It also provides practical and theoretical training courses for the correct use of its machines, plants, and consumables.
-
-
-
-
-
Wenzhou Bluesky Energy Technology Co., Ltd
Fuel dispenser
Manufacturer Overview
Wenzhou BlueSky Energy Technology Co. Ltd., established in 1997 and headquartered in Zhejiang, China, is a manufacturer and supplier of gas station equipment. The company specializes in fuel dispensers, LNG station equipment, and EV chargers. It provides solutions for petroleum, dispensers, and pump management systems. Its manufacturing processes include CNC punching, laser cutting, and electrostatic spraying. The company also offers various fuel dispenser configurations and end-to-end services covering design, transportation, and maintenance for filling equipment solutions.
-
-
-
-
-
Fluidwell bv.
Delivery Controller / Dispenser
Manufacturer Overview
Fluidwell Bv. is a Dutch ATEX and IECEx-certified manufacturer of process industry electronics that was established in Veghel, Noord-Brabant, in 1993. The company produces level measurement products such as level transmitters, pressure measurement products such as pressure alarms, and panel mounted instruments such as flow calculators. It also offers explosion-proof instruments for process control applications, including flow rate indicators and data loggers. The company’s products are commonly used in the petrochemical, oil and gas, and wastewater treatment industries.
-
-
-
-
-
CRYOSTAR industrial cryogenics
LNG Dispenser
Manufacturer Overview
Cryostar Industrial Cryogenics is based in Hésingue, France, and is a manufacturer of cryogenic systems and equipment established in 1967 as a part of the Equans Group. The company offers reciprocating pumps for high pressure applications, centrifugal pumps for unloading or loading of liquid gasses, and expanders for air separation or gas liquefaction processes. It also offers small-scale companders and heat exchangers for LNG distribution or storage. The company is ISO 9001, ISO 14001, and ISO 45001-certified, and chiefly serves clients in the industrial processing sector.
-
-
-
-
-
Dega Plastics
Dosage and Coloring
Manufacturer Overview
DE.GA. S.p.A. (Dega Plastics), founded in 1978, is an Italian manufacturer, based in Iseo, Brescia, specializing in peripheral equipment and automations for plastic transformation processes. The company offers carbon steel or stainless steel screw-feed blenders for granule or powder mixing, mechanical spiral conveyors, and thermos regulators. The company also produces cooling systems, hot air generators, and machines for precise dosing of additives. It further provides manipulators for injection molding machines, warehouse mills, and metal separators.
-
-
-
-
-
Watts.
DPD Dispenser
Manufacturer Overview
Watts was established in 1874 and is a manufacturer of water management products based in North Andover, Massachusetts, United States. The company offers various water solutions products such as automatic control valves, gas connection systems, pressure reducting valves, water quality parts, and high purity process piping systems. The products have been used for serving various industries such as healthcare, agriculture, hospitality, commercial, and municipal waterworks. The products have been created under compliance of CSA, NSF International, WQA, BSI, and AGA manufacturing standards.
-
-
-
-
-
CAVICCHI IMPIANTI S.r.l.
BATCHING UNITS
Manufacturer Overview
Cavicchi Impianti S.r.l., established in 1991 and headquartered in Castenaso, Italy, is a manufacturer of solutions for conveying, mixing, and weighing powders and granules. The company is a provider in the bulk material handling industry. Its products include blending equipment, batching units, and bulk bag handling systems tailored to food, chemical, and plastic industries. Its equipment is designed and manufactured to deliver economical and efficient solutions, adhering to CEE laws. The company offers consultancy services and serves as a partner for machinery constructors and installers across diverse sectors.
-
-
-
-
-
P.M.S. Packaging Machinery Solutions
Packaging Machines
Manufacturer Overview
Packaging Machinery Solutions (PMS), established in 1984 and headquartered in Bologna, Italy, is a liquid and solid product packaging equipment designer and manufacturer. The company offers process-production packaging machines, filling and capping machines, and automated packaging systems. It also provides special packaging machines for hard-packing compact powders, such as eye shadow, cartoning machines for disposable syringes in multiple blisters, and bench-top labelers. These products are used in the production and packaging of products in the pharmaceutical, cosmetic, and food industries.
-
-
-
-
-
R.C.V. srl
Automatic dosing units
Manufacturer Overview
R.C.V. srl, established in 1964 and based in Altavilla Vicentina, Veneto, Italy, is a manufacturer of switch mode power supplies and rectifiers for the plating industry. The company offers modular power supplies equipped with regulators to convert electrical power efficiently, plating rectifiers that regulate current flow during electroplating processes, and three-phase power supplies for 400V for precious metal plating. The company operates internationally, with partner distributors in the European Union and Asia.
-
-
-
-
-
ShenZhen J&D Drinking Water Equipment Co.,Ltd
Water Dispenser
Manufacturer Overview
ShenZhen J&D Drinking Water Equipment Co. Ltd is based in Shenzhen, Guangdong, China, and is a manufacturer of water filling and treatment equipment that was established in 2008 before becoming a subsidiary of Jingzhongjing Group Co. Ltd. The company’s products include water treatment machines and equipment for desalination, softening, and sterilization of water. It also offers filling production lines for water or beverages, blow-molding machines for producing bottles or cans, and labeling machines. The company’s products are commonly used by clients in the recreational beverages, pharmaceutical, and chemical industries.
-
-
-
-
-
Tetra Pak Processing Systems America, Inc.
Dosing and weighing
Manufacturer Overview
Tetra Pak is based in Switzerland since 1952 as a manufacturer and supplier of food processing and packaging solutions. The company collaborates with food and beverage industries to provide suitable food processing solutions based on the type of food. Food processing includes ensuring the wellness of the food and getting it ready for packaging. The type of packaging is also decided such as aseptic packages, chilled packages, and standard food packages that preserve the quality of the food and the beverage as well as make it easier for distribution.
-
-
-
-
-
TECNA srl
SOLVENT DISPENSING SYSTEM
Manufacturer Overview
TECNA srl is based in Mirandola, Modena, Italy, and is an ISO 9001-certified manufacturer of electronic equipment originally established in 1984 before being acquired by the Marposs Group in 2016. The company’s products are primarily used for industrial process control operations. These include solvent dispensers, leak and flow testers, and data collection software. The company also provides calibration, installation, and maintenance services for its customers with unique project specifications. Its products are used by clients in the home appliance, medical, and automotive industries.
-
-
-
-
Manufacturer Overview
Aritan is a manufacturer of workplace utilities and equipment incorporated in 2010 and located in Pendik, İstanbul, Turkey. The company’s products include butterfly turnstiles for access control of employees or visitors, washroom accessories such as blow dryers and towel dispensers, and hygiene stations for laboratory or pharmaceutical research facilities. It also offers custom manufacturing services for unique projects or use cases. The company’s products are commonly used in the healthcare and pharmaceutical industries, as well as in Turkey’s research and science institutions.
-
-
-
-
Helmac S.r.l.
DSPH manual bench dispenser
Manufacturer Overview
Helmac S.r.l. is a manufacturer of weight scales and related equipment established in 1979 in Fiorano Modenese, Italy. The company offers hanging scales for mobile or itinerant sales operations such as in wet markets, bench scales for assisted sales operations such as in retail outlets, and self-service scales for customer operation and ease of use. It also offers price labeling scales for weight-price operation, such as in butcher shops. The company’s products are commonly used in department stores, supermarkets, and public markets.
-
-
-
-
-
Acinox
Face masks dispenser
Manufacturer Overview
Acinox, founded in 2007, is a French manufacturer based in La Chevrolière, Pays de la Loire, specializing in cleaning and personnel safety equipment. The company offers products for floor hygiene, such as stainless steel floor drain tanks and covers, blinded maintenance holes, and drainage channels. It also produces stainless steel hygienic equipment such as floor drains, hand washing stations, and knife sterilizers to ensure food safety within the food industry. It even offers equipment for handling food products, such as lifters, tilters, and stainless steel trays. Storage and protection solutions, such as dispenser boxes and door protection units, are also available.
-
-
-
-
-
IP Cleaning Srl
DISPENSERS
Manufacturer Overview
IP Cleaning Srl, founded in 2005 and headquartered in Summaga di Portogruaro, Italy, is a manufacturer of professional cleaning equipment. The company designs and manufactures products and systems with a view to increasing productivity in the cleaning process. Its product portfolio consists of cleaning machines and manual equipment, including scrubber driers, sweepers and high pressure cleaners. It has five production plants located in the north of Italy and ten international branches in Europe, Americas and Asia. The company also provides other services like pre-sales consulting, financial instruments and logistics.
-
-
-
-
-
SHANDONG MINING MACHINERY GROUP CO.,LTD
Inorganic automaticdosing system
Manufacturer Overview
Shandong Mining Machinery Group Co., Ltd., established in 1955 and headquartered in Shandong, China, is a manufacturer that specializes in the manufacturing of mining machinery and equipment. The company manufactures and sells mining machinery and equipment, including coal mining machinery, hydraulic equipment, and engineering machinery. It also provides It also provides technical mining, equipment installation, and leasing services. Its products are designed to improve the safety of coal mining operations. The company has achieved ISO9001:2008 Certification for its quality management systems. Moreover, it serves the coal mining industry.
-
-
-
-
-
GVM, Inc
Dispensers
Manufacturer Overview
GVM, Inc, established in 1977, and headquartered in Biglerville, Pennsylvania, is a manufacturer of agricultural and snow equipment. Its products line includes spreaders, sprayers, tractors and tire handlers, brine making, and dispensing systems, which serves in the agriculture, snow removal, commercial, and industrial. The company is capable of milling, tapping, drilling, bending, and band saw cutting. Its products are used for efficient distribution of materials such as seeds, fertilizers, chemicals, and road treatments.
-
-
-
-
-
Meritool LLC
Dispensers
Manufacturer Overview
Meritool, founded in Salamanca, NY, in 2001 is a manufacturer of cordless caulking guns. The company's product portfolio includes cordless adhesive guns, manual guns, cartridges and accessories that are used in the Auto Glass Replacement (AGR) market as urethane dispensers. The company serves markets such as Food and Beverage, consumer goods, Automotive, Pharmaceutical and Biotechnology and Chemical and Petrochemical. The company also provides services including national distribution, product selection, repair and customer service.
-
-
-
-
-
Clear-San Pro
Dispensers
Manufacturer Overview
Clear-San Company, LLC. was established in 2020 and is based in Waite Park, Minnesota, USA, as a manufacturer of premium gel and liquid hand sanitizer. The company's product line comprises hand sanitizer, Clear-San Pro 32 oz. spray bottle, Clear-San Pro Wall Mounted Touch-Free Automatic Sanitizer Dispenser, 2oz. Boston Round, and a 32 oz. decanter spray bottle, among others. These offerings serve applications like liquid dispensing, hygiene promotion, disinfection, and diverse cleaning needs. These products are suitable for use in various settings, including banks, churches, restaurants, schools, construction companies, homeless shelters, and public facilities.
-
-
-
-
-
Hil-Man Automation
Dispensers
Manufacturer Overview
Hil-Man Automation, founded in 1996 and located in Zeeland, Michigan, is a manufacturer that provides industrial automation solutions. Their range of products includes robotic systems, assembly equipment, material handling systems, pick-and-place systems, and packaging equipment. Their industrial automation solutions enhance productivity, accuracy, and efficiency in manufacturing operations, enabling companies to achieve higher output, cost savings, and improved quality control. The products offered by Hil-Man Automation are utilized in a range of industries that require industrial automation solutions.
-
-
-
-
-
AViTEQ Vibrationstechnik GmbH
Loss-in-Weight Feeders
Company Overview
AViTEQ, based in Hattersheim am Main, Germany, is a manufacturer of vibration technology for bulk material handling. Originally established in 1939 as part of the AEG group, it became a privately owned company in 2006. The company's product lineup includes circular motion screens for separating materials, tubular or spiral conveyor system models for material transport, and belt scales. It also offers its Vibtronic brand controllers and drive components, including compact feeder drives for vibration control. The company primarily serves clients in animal feed processing, mining, and glass production operations.
-
-
-
-
-
Syrris
Atlas HD
Company Overview
Syrris is based in Royston, Hertfordshire, United Kingdom, is a manufacturer of chemical reactors and flow chemistry equipment established in 2001 before becoming a subsidiary of Asahi Glassplant Inc. The company offers automated jacketed reactors for batch chemical reactions with controllable automated stirring, and flow chemistry systems designed to increase the scalability and efficiency of continuous flow reactions. It also offers orb jacketed reactors, orb pilot scale-up reactors, and syringe pumps for precise dosing to maintain reaction conditions. The company chiefly serves clients in the industrial processing sector.
-
-
-
-
-
ESSEGI 2 s.r.l.
WEIGHING/DOSING SYSTEMS
Company Overview
ESSEGI 2 s.r.l. is a manufacturer of packaging and industrial automation lines established in 1987 and based in Arzignano, Veneto, Italy. The company's product lineup includes horizontal and vertical balers for compressing and packaging bulky products, systems for precisely weighing or dosing granular or powdered products, and loading lines for handling or mixing agricultural products such as fertilizer. It also offers additional equipment and accessories for enhancing packaging and automation processes. The company's products are mainly used in the food and beverage, chemical, and agricultural sectors.
-
-
-
-
-
TECNIMODERN AUTOMATION
VOLUMETRIC SCREW FEEDER
Company Overview
TECNIMODERN AUTOMATION, established in 1973 and based in Laval, France, is a manufacturer and supplier specializing in the design of assembling and packaging machines. The company's product portfolio includes vertical bagging machines, automatic counters for weighing, and TA vibrating bowls. These products are used in various industries, including the packaging industry, electronics, and the food and beverage industry. The company provides services, including technical support, customizing the machines to meet the specific needs of customers, and ensuring the availability of spare parts.
-
-
-
-
-
Inelme
I-IDS ink dispenser
Company Overview
Inelme, established in 1996 and headquartered in Valencia, Spain, is a manufacturer and supplier of equipment for the printing industry, specializing in Flexography and Gravure. The company's product portfolio includes ink concentration control systems, doctor blade chambers for flexography, and anilox sleeve warehouses. These products find applications in various sectors, including the laminating industry, graphic businesses, and packaging and labeling. The company offers services including technical support, customization of products to meet customer needs, and repair. The company has a global footprint in more than 40 countries, including the United States, Mexico, and the Philippines.
-
-
-
-
-
B.S. SRL
Automatic bread dispenser
Company Overview
B.S. SRL, a company founded in 1980 and headquartered in Parma, Italy, is a manufacturer and supplier specializing in food production machines. The company's product portfolio includes automatic bread dispensers, ice cream tray filling lines, and dosages for pizzas. These products are utilized in various sectors, including the ready meals industry, ice cream, and confectionery industries. The company offers services, including 24/7 technical support, identifying problems, making modifications, and correcting software issues without the need for an on-site visit, as well as maintenance.
-
-
-
-
-
Becpak
Packing tape dispenser
Company Overview
Becpak Sp. z o.o., founded in 2003 and based in Warsaw, Poland, is a manufacturer and distributor of packaging products that include cartons, tape, and plastic packaging. It stocks accessories like steel coiled tapes, permanent markers, and gloves and sells to the European market. The company also provides customized made-to-measure packaging for both businesses and individuals. The company handles wholesale and retail orders, and its customers span various industries, such as transport, furniture, and food.
-
-
-
-
-
witeg Labortechnik GmbH
BOTTLE-TOP DISPENSER
Company Overview
Witeg Labortechnik GmbH, founded in Germany in 1960, is a manufacturer and supplier of laboratory equipment and consumables. Its wide product range includes glass measuring devices, electric laboratory devices, liquid handling, heating baths, and laboratory consumables, while also providing a repair service as well as quality management services. It is officially certified according to DIN EN ISO 9001 and participates in a number of exhibitions, including Analytica 2024 and ACHEMA 2024.
-
-
-
-
-
Pageris
Straw dispenser
Company Overview
Pageris AG, part of the C. Ehrensperger AG corporate group, established in 1947 and headquartered in Zurich, Switzerland, is a manufacturer and distributor of foam guns, dispensers, and related accessories. The company's products include Pageris P20 and P20L foam guns designed for precise application of PU foam. These tools are utilized for insulation, assembly, and bonding applications. It provides dispensers for applying adhesives, silicones, and other materials. The company's plastic precision valves, including the GFS and FS valves, ensure consistent and controlled dispensing of materials. Its can collars and caps accessories enhance the functionality and usability of its products across industries.
-
-
-
-
-
TECNICOLL SRL
Volumetric Dosing Head
Company Overview
TECNICOLL SRL, established in 1985 and based in Venegono Superiore, Italy, is a manufacturer and supplier specializing in cosmetic manufacturing equipment. The company's product portfolio includes dosing systems, molds for castings, and rotary unloading tables. These products are specifically designed for use in cosmetic manufacturing, supporting various processes such as hot dosing, gluing, and powder pressing. The company provides services, including consulting on how the machines will perform and operate, customization, and offers spare parts to ensure the continuous and efficient operation of its machines over time.
-
-
-
-
-
Baker Pekins Limited
Upgrades
Company Overview
Baker Pekins Limited, established in 1920 and based in Cambridgeshire, England, is a manufacturer and supplier specializing in food processing equipment. The company's product portfolio includes commercial bread-making machines, high-speed mixers, and confectionery manufacturing equipment. These products are used in various sectors, including the bakery industry, breakfast cereal, and biscuit and cookie industries. The company offers services such as technical support, the provision of engineers to manage equipment maintenance and address breakdowns, as well as training sessions on the operation of its machines.
-
-
-
-
-
I.C.M.I. INDUSTRIA COSTRUZIONE MACCHINE IMBALLAGGIO S.R.L
Tape dispensers
Company Overview
Industria Costruzione Macchine Imballaggio SRL (ICMI), founded in 1975 and headquartered in Zingonia Verdellino, Bergamo, Italy, is a manufacturer and distributor of packaging machines. The company specializes in the manufacture of gummed polypropylene-coated paper taping machines for closing and taping cardboard boxes with gummed paper tapes, recognized for being a low-cost ecological solution that also provides a resistant security seal. It also offers a range of its own and German-made labeling systems, carton erectors, and roller conveyors. The company primarily serves logistics companies, independent online retailers, and OEMs.
-
-
-
-
-
Vestil Manufacturing Corp.
Automatic Liquid Sanitizer Dispenser
Company Overview
Vestil Manufacturing Corp. is a manufacturer and distributor of material handling equipment, based in Michigan since 1957. The company produces equipment for various industries such as they make floor markers, speed bumps and car stops, etc. for Facilities Maintenance. Their hoists and trollies, drum handling equipment, carts, and dollies, and industrial ladders have applications in the agricultural, manufacturing, construction, and general marketing industries. Other than that scales, casters, wheels, packaging equipment, and similar items have uses in the postal services, hospitals, restaurants, and food production companies. Overall Vestil provides a solution to manage material handling in any department.
-
-
-
-
-
Adinox S.A.
Aseptic Dosing Unit
Company Overview
Adinox S.A. is an ISO 9001-certified manufacturer and supplier of food processing equipment established in 1998 and based in Quito, Pichincha, Ecuador. The company’s products include ultra high temperature (UHT) sterilizers for heat treatment of liquid food products, high-temperature short-time (HTST) pasteurizers for milk or dairy products, and its Bactofuge brand systems for eliminating spores or bacteria from milk. It also offers aseptic pouch packaging machines for dairy or juice products. The company’s products are commonly used in the food, beverage and snack food industries.
-
-
-
-
-
ROTOX USA inc.
Adhesive Dispenser
Company Overview
ROTOX USA Inc. is an American distributor of machinery for window construction established in 2006 as a North American subsidiary of the German company ROTOX GmbH. The company offers various machines for glazing, assembly, cutting, and welding operations, as well as machining centers for drilling and milling profiles or bars. It also offers material handlers for storing and sorting, corner cleaning machines and software that optimizes production planning. The company's products are mainly used by clients in the construction and architecture sectors, as well as by door and window manufacturers.
-
-
-
-
-
-
-
-
-
-
-
Jonesco UK
Single IBC with an integrated dispenser
-
-
-
-
-
GENERIC FLUID SYSTEMS
BATCHMETRIX
-
-
-
-
-
Metric AG & Co. KG.
PLUGSTATION EARPLUG DISPENSERS
-
-
-
-
-
FERPLAST
GLUE DOSING SYSTEM
-
-
-
-
-
Henkel AG & Co.KGaA.
dynamic mixing head
-
-
-
-
-
Censtar Science & Technology Corp., Ltd
FUEL DISPENSER
-
-
-
-
-
LABELPACK TRADE SRL
LABELS DISPENSERS
-
-
-
-
-
medmix Switzerland AG
COX 1-Component Manual Dispensers
-
-
-
-
-
ASMPT SMT Solutions
Paste Management
-
-
-
-
-
Velec Systems
Cutlery Depositor
-
-
-
-
-
Wolfangel GmbH
WALL DOSING UNITS
-
-
-
-
-
Zhejiang Henghui Machinery Co., Ltd.
High Pressure Foaming Machine
-
-
-
-
-
SAIP
Dosing units
-
-
-
-
-
Cannon S.p.A.
Dosing Machines
-
-
-
-
-
Dalian Huagong Innovation Technology Co., Ltd.
Customized production
-
-
-
-
-
PDS, Inc.
Dispenser
-
-
-
-
-
Isotherm AG
Dosing systems
-
-
-
-
-
Vollenda-Werk GmbH
Dosing systems
-
-
-
-
-
Miele
AUGER DOSER
-
-
-
-
-
RAV SISTEMI SRL
Powder Linear Filling
-
-
-
-
-
LAMBDA Laboratory Instruments GmbH
Powder Dosing
-
-
-
-
-
Innovativetools.eu
Magnetic Plastic Sheeting Dispenser
-
-
-
-
-
Inkmaker SRL
Automatic Dispensing System
-
-
-
-
-
Ingersoll Rand Inc.
Malt Analysis Sample Preparation Platform
-
-
-
-
-
SATO Asia Pacific Pte.
Label Dispenser
-
-
-
-
-
Vale Tech Ltd
Vale-Tech Dispensing Systems
-
-
-
-
-
TÉCNICAS MECÁNICAS ILERDENSES, S.L.
Dispenser
-
-
-
-
-
KFT FOOD TECHNOLOGY
Dispenser
-
-
-
-
-
Chemplate Materials SL
InduBond CD
-
-
-
-
-
BETONMEC S.R.L.
Automatic Fiber Dispenser
-
-
-
-
-
Kisling AG
Dispensing Guns
-
-
-
-
-
SCHÄFER Werke GmbH
Dispensing unit draft2go
-
-
-
-
-
DLAB SCIENTIFIC CO.,LTD.
Bottle-Top Dispenser
-
-
-
-
-
Europoliuretani srl
1k Basic Dispenser
-
-
-
-
-
Weinkauf Medizintechnik
Formalin Dispenser
-
-
-
-
-
Supertape bv
Handdispensers
-
-
-
-
-
ViscoTec Pumpen- u. Dosiertechnik GmbH
component industrial dispenser
-
-
-
-
-
TECMEC S.r.l.
Dispenser
-
-
-
-
-
Kuban Coffee Roasters
DISPENSER
-
-
-
-
-
Tema Sinergie
KARL100
Distributor Overview
Tema Sinergie, established in 1985 and headquartered in Italy, is a supplier and distributor of medical technology solutions. The company specializes in medical linear accelerators, mainly using Pinnacle3 for treatment planning. Its expertise in medical physics, biomedical engineering, and informatics makes it a key provider of solutions in urological oncology, particularly for prostate cancer diagnosis and treatment. It supplies diagnostic radiology dosimetry, dose management, and radiotherapy planning solutions, empowering healthcare providers with state-of-the-art technologies. The company’s solutions include nuclear medicine, barrier isolation technology, and medical physics.
-
-
-
-
-
Clemex Technologies Inc
Powder Disperser
Distributor Overview
Clemex Technologies Inc., founded in Canada in 1990, is a supplier of automated image analysis software for microscopy. The company specializes in automating the measurement of objects in digital images from microscopes and other precision optical devices. Its products are used around the world by quality control and research labs in industries as diverse as healthcare, car manufacturing, pharmaceuticals, and aerospace. The company also offers custom solutions, after-sales services and customer support.
-
-
-
-
-
Pro-Tek inc.
Magnetic Masking Tape Dispenser
Distributor Overview
Pro-Tek inc. was founded in 1982 and is a supplier of paint and body shop equipment products based in Longueuil, Quebec, Canada. The company offers various products such as paint thickness testers, air control units, air dry guns, jetair waterborne drying systems, and HLVP pressure spray. The products are waterborne compatible with stainless steel sets and fluid passages. The products are supplied to the body shop and paint market industries. The company offers warranty for the products for up to 1 year after the purchase.
-
-
-
-
-
Industrial Propane Service, Inc.
Dispensers
Distributor Overview
Industrial Propane Service, Inc. is a company based in the Michigan, United States, established in 1963 and a distributer and supplier of propane solutions for various industrial applications. The company’s main products and services include propane supply, storage, and distribution, catering to the energy needs of industrial facilities. Propane offered by the company is a crucial component in powering various industrial processes, equipment, and machinery. It is used in manufacturing, agriculture, construction, and other industries for its clean-burning and efficient characteristics. Industrial Propane Service, Inc. continues to be a dependable partner, supplying propane solutions to support industrial operations across the nation.
-
-
-
-
-
Koehler Rubber & Supply Co.
Dispensers
Distributor Overview
Koehler Rubber & Supply Co. (Koehler) was founded in 1917 and operates out of Independence, Ohio. Koehler is a distributor for specialty fluid application products. Product offerings include spray finishing equipment, fluid pumping and handling, lubrication, hoses, sealants, adhesives, meter mix, dispense systems, spray systems, hydraulic & pneumatic equipment such as adapters and fittings, and measuring devices such as gauges and thermometers. Koehler also offers value-added services such as system design, service & repair, maintenance training, operator training, and efficiency analysis.
-
-
-
-
-
Scheugenpflug
DISPENSERS
Company Overview
Scheugenpflug, founded in 1990 and headquartered in Neustadt an der Donau, Germany, is a manufacturer and supplier of dispensing, bonding, and potting systems. The company's product portfolio includes DOS manual workstations, vacuum potting machines, and material feeding systems. These products are used in various sectors, including medical device manufacturing, renewable energy generation, and machinery and plant engineering. The company is ISO 45001:2018, ISO 9001:2015, and ISO 14001:2014 certified, with locations in the United States, China, and South Korea.
-
-
-
-
-
ROVEMA GmbH
SDH
Company Overview
ROVEMA GmbH, founded in 1959 and headquartered in Fernwald, Germany, is a manufacturer and supplier of packaging machines and systems. The company's product portfolio includes dosing systems, intermittent motion horizontal cartoning machines, and final packaging machines. These products find applications in various industries, including the food industry, agriculture, and retail and consumer goods. The company offers services including training, retrofitting, and modification of clients' machines, as well as product catalogs. The company has subsidiaries and representatives in various countries, including the United States, Algeria, and India.
-
-
Dispenser Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Safetec of America, Inc. |
2.3%
|
| 2 | IVEK Corporation |
2.2%
|
| 3 | Cecor Incorporated |
2.2%
|
| 4 | GERMisept |
2.2%
|
| 5 | Marlin Steel Wire Products |
2.0%
|
| 6 | Mile-X Equipment, Inc. |
1.8%
|
| 7 | Hernon Manufacturing, Inc. |
1.7%
|
| 8 | ROSS Mixers |
1.7%
|
| 9 | Pexco LLC |
1.7%
|
| 10 | Dynamic Automation & Robotics |
1.7%
|
Derivation Method
The ranking is calculated based on the click share within the dispenser page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Mettler-Toledo: 16,200
- Nordson Corporation: 7,331
- Mahr Inc.: 1,900
Newly Established Company
- Adam Pumps S.p.A.: 2010 (14 years ago)
- SMTmax: 2009 (15 years ago)
- Packing machines packaging: 2007 (17 years ago)
Company with a History
- Sulzer Ltd: 1834 (190 years ago)
- ROSS Mixers: 1842 (182 years ago)
- Henkel Corporation: 1876 (148 years ago)
Dispenser Manufacturers in United States
*Including some distributors, etc.
- IVEK Corporation
- Mile-X Equipment, Inc.
- FSI
- Hernon Manufacturing, Inc.
- Henkel Corporation
- ROSS Mixers
- Nordson Corporation
- Metcal, a Brand of OK International
- 3M
- Globe Scientific Inc.
- EXACT Dispensing Systems
- Graco Inc.
- Eppendorf North America
- Start International
- GERMisept
- Cecor Incorporated
- Hapco
- Safetec of America, Inc.
- T/J Fabricators, Inc.
- Marlin Steel Wire Products
- Wayne Chemical Inc.
- Dynamic Automation & Robotics
- Lapmaster International, LLC
- Riverside Automation
- Gluefast Co., Inc.
- Techcon
- PVA
- SMTmax
- Fisnar
- BrandTech Scientific, Inc.
- Pexco LLC
Global Distribution of Dispenser Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
31 | 44.9% |
Italy
|
10 | 14.5% |
Germany
|
9 | 13.0% |
Switzerland
|
4 | 5.8% |
Spain
|
3 | 4.3% |
|
Poland
|
2 | 2.9% |
Canada
|
2 | 2.9% |
| Romania | 1 | 1.4% |
India
|
1 | 1.4% |
China
|
1 | 1.4% |
Czech Republic
|
1 | 1.4% |
Ukraine
|
1 | 1.4% |
Denmark
|
1 | 1.4% |
United Kingdom
|
1 | 1.4% |
France
|
1 | 1.4% |
List of Dispenser Products
1 product is listed.
Medist Sanite Co., Ltd.
Alcohol compatible auto dispenser
30+ people viewing
■ Characteristics -Sermicitis deodorization is possible at a low concentration. ・ Not toxic and no irritation. ・ Safe ingredients (salt and water...
