Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration-ROTA NCS 260/6 Z220-KV

Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration-Rota NCS 315/6 Z220-KV

Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration-Rota NCS 400/6 Z300-KV

Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration-ROTA NCS 500/6 Z380-KV

Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration
Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

12.4hours

Relatively Fast Response

About This Product

6 Joe Power Chuck, no penetration
Completely closed type 6 Joe Power Chuck with active jople down function.

Advantages and benefits
■ High -quality requirements high -precision liver power chuckAchieve outstanding processing processes

■ High efficiency lever systemHigh -grown and highly processed clamp

■ Sealed shieldPerfection protection for coolant and chips

■ Always fill the oilAlmost maintenance -free and stable groom

■ Active JoPle DownCorresponds to high -level demands without the wake of the work from the chuck surface.

■ Media feeds through (coolant or air) is built into chuck body as a standard optionAdaptability according to the application

■ Built -in centrifugal force correction mechanismHigh -speed processing is possible

■ Easy to replace the base joeCompatible with outer and inner diameter clamps

■ Work clamps that are easy to deform with thin thicknessHigh -circular circular degree of work

■ Clamping of non -circular components is very accurateIdeal for casting

■ Polishing / baking all functional partsLong product life

Options, others
■ Sealed for mass production 6 Joe ChuckROTA NCS is a power -chuck for a completely sealed structure with Joe's active pull -in operation. This chuck is suitable for the outer and inner diameter clamp applications, and the chuck size is selected according to the applicable work size. Rota NCS is a center clamp.

6. Pendulum mechanisms are incorporated in Joecuck. As a result, the work can be positioned at the center of the six contact points, and each six contact points can be adjusted in pairs. Pre -processed parts can also be determined by the center position without distorting the work.

Rota NCS is mostly maintenance -free and is optimized for use with horizontal and vertical machines in mass production.

Model
There are 8 models for this product.

Product
Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration

Handling Company
Sunk Japan Co., Ltd.

Categories

Fixtures

Hydraulic Vises

Clamps & Fasteners

Hydraulic Chucks

Clamps & Fasteners

Chucks

540+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

8 Models of Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Spindle type	Spindle size	Seration	Maximum RPM (1/min)	Most maximum personal (KN)	Maximum operation power (kn)	Stroke / Joe (mm)	Pulled operation (mm)	Lever length (mm)	Piston stroke (H) (mm)	Pendulone correction (mm)	Weight (kg)
ROTA NCS 260/6 Z220-KV	Available upon quote	ISO702-4	Nr.8 (Z220)	Tung and groove	3,800	44	20	5.8	0.3	46.5	21	± 2	45
Rota NCS 260/6 A8-KV	Available upon quote	ISO702-1	Nr.8	Tung and groove	3,800	44	20	5.8	0.3	46.5	21	± 2	45
Rota NCS 315/6 Z220-KV	Available upon quote	ISO702-4	Nr.8 (Z220)	Tung and groove	2,200	80	48	7.7	0.3	53.5	25	± 2	67
Rota NCS 315/6 A8-KV	Available upon quote	ISO702-1	Nr.8	Tung and groove	2,200	80	48	7.7	0.3	53.5	25	± 2	67
Rota NCS 400/6 Z300-KV	Available upon quote	ISO702-4	Nr.11 (Z300)	Tung and groove	2,000	80	48	7.7	0.3	53.5	25	± 3	150
Rota NCS 400/6 A11-KV	Available upon quote	ISO702-1	Nr.11	Tung and groove	2,000	80	48	7.7	0.3	53.5	25	± 3	150
ROTA NCS 500/6 Z380-KV	Available upon quote	ISO702-4	Nr.15 (Z380)	Tung and groove	1,400	120	65	8.2	0.5	75.5	30	± 3	230
Rota NCS 500/6 A15-KV	Available upon quote	ISO702-1	Nr.15	Tung and groove	1,400	120	65	8.2	0.5	75.5	30	± 3	230

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Turtle chuck G series for hydraulic power chuck

Ohno Seiki Co., Ltd.

90+ people viewing

Last viewed: 38 minutes ago

Response time: 21.88 hours

Hydraulic Vises

3 models listed

Air-driven hydraulic cylinder Mechanical accessories Tool holding fixture with anti-rotation lock V

TOX Presso Technique Co., Ltd.

30+ people viewing

Last viewed: 10 hours ago

Response time: 0.19 hours

Hydraulic Vises

Large claws and easy to work 3 claw hydraulic chuck CV series

Kawatatek Co., Ltd.

250+ people viewing

Response time: 16.34 hours

Hydraulic Vises

4 models listed

Improving sealability with large joe stroke Lightweight large 3 claw power chuck No penetrating hole ROTA NCO2

Sunk Japan Co., Ltd.

540+ people viewing

Response time: 12.40 hours

Hydraulic Vises

30 models listed

4 Equipped with a cozy mechanism for each claw, hydraulic combination chuck CVA series

Kawatatek Co., Ltd.

480+ people viewing

Response time: 16.34 hours

Hydraulic Vises

14 models listed

5 -axis compatible 5 -axis compatible Vice Genius born in a 5 -axis processor

Kawatatek Co., Ltd.

360+ people viewing

Last viewed: 9 minutes ago

Response time: 16.34 hours

Hydraulic Vises

10 models listed

Long stroke type 3 claw hydraulic chuck CLK series

Kawatatek Co., Ltd.

400+ people viewing

Last viewed: 5 hours ago

Response time: 16.34 hours

Hydraulic Vises

10 models listed

Completely closed type 3 Joe Power Chuck with an active jople down function ROTA NCS 3

Sunk Japan Co., Ltd.

670+ people viewing

Last viewed: 4 hours ago

Response time: 12.40 hours

Hydraulic Vises

30 models listed

Each opposition claws are cautious and strong grasp 4 claw hydraulic chuck 4ha series

Kawatatek Co., Ltd.

670+ people viewing

Response time: 16.34 hours

Hydraulic Vises

20 models listed

Sealed type for lathes with 20 times the maintenance interval 3 Joe High -precision power chuck ROTA NCA

Sunk Japan Co., Ltd.

1080+ people viewing

Last viewed: 6 hours ago

Response time: 12.40 hours

Hydraulic Vises

30 models listed

Excellent and closed long Joe Stroke Media Feed Throo General -purpose 3 Joe Power Chuck No Pen through Rota NCO

Sunk Japan Co., Ltd.

850+ people viewing

Last viewed: 1 hour ago

Response time: 12.40 hours

Hydraulic Vises

30 models listed

3 with Joe Power Chuck Pen through and with centrifugal force ROTA NCF Plus 2

Sunk Japan Co., Ltd.

3720+ people viewing

Last viewed: 2 hours ago

Response time: 12.40 hours

Hydraulic Vises

30 models listed

See More Hydraulic Vises Products

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

560+ people viewing

Last viewed: 2 hours ago

Response time: 12.40 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

630+ people viewing

Last viewed: 17 hours ago

Response time: 12.40 hours

Grippers

10 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

550+ people viewing

Last viewed: 12 hours ago

Response time: 12.40 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

890+ people viewing

Last viewed: 16 hours ago

Response time: 12.40 hours

Grippers

40 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

650+ people viewing

Last viewed: 10 hours ago

Response time: 12.40 hours

Grippers

30 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1220+ people viewing

Response time: 12.40 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

1010+ people viewing

Last viewed: 15 hours ago

Response time: 12.40 hours

Grippers

20 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

490+ people viewing

Response time: 12.40 hours

Grippers

20 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

480+ people viewing

Last viewed: 6 minutes ago

Response time: 12.40 hours

Grippers

40 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

470+ people viewing

Last viewed: 2 hours ago

Response time: 12.40 hours

Grippers

10 models listed

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide

Sunk Japan Co., Ltd.

750+ people viewing

Last viewed: 17 hours ago

Response time: 12.40 hours

Grippers

4 models listed

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers

Sunk Japan Co., Ltd.

220+ people viewing

Response time: 12.40 hours

Grippers

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

Response Rate

100.0%

Response Time

12.4hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

About This Product

■ High -quality requirements high -precision liver power chuck

■ High efficiency lever system

■ Sealed shield

■ Always fill the oil

■ Active JoPle Down

■ Media feeds through (coolant or air) is built into chuck body as a standard option

■ Built -in centrifugal force correction mechanism

■ Easy to replace the base joe

■ Work clamps that are easy to deform with thin thickness

■ Clamping of non -circular components is very accurate

■ Polishing / baking all functional parts

■ Sealed for mass production 6 Joe Chuck

8 Models of Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration

Customers who viewed this product also viewed

Other products of Sunk Japan Co., Ltd.

About Company Handling This Product

Related search keywords

Completely closed type with active jople down function Rota NCS 6 without Joe Power Chuck penetration
Sunk Japan Co., Ltd.