General -purpose rotation unit SRM that can be used for air pressure type turning and rotation movement
Sunk Japan Co., Ltd.
About This Product
General -purpose turning unit
A general -purpose unit that can be used for air pressure type turning and rotation movement.
Advantages and benefits
■ Series lineup that is finely classified according to the torque level
Prepare the size required for various applications as standard products
■ Central hole in large diameter
Cable and hose feed through without changing the unit height
■ Shock absorber stroke has been set
A quick and easy tool test run is possible.
■ Selection of turning angle 90 ° / 180 °
You can freely select the rotation angle. We will also provide angles for specific applications according to your request.
■ You can select whether to make the stop position adjusted smaller or large
Flexibly adjust the turning angle
■ Flood feed -through and electrical feedrow can be attached as options
Permanent safe feedroo of gas, negative pressure, electric sensor, and actuator signals
■ Module attachment for using various options
Adjust individually according to the application
■ Select an electronic magnet sensor or an induced proximity sensor
Compatible with very abundant position monitors
* There are other part numbers.
-
Product
General -purpose rotation unit SRM that can be used for air pressure type turning and rotation movement
-
Handling Company
Sunk Japan Co., Ltd.
10 Models of General -purpose rotation unit SRM that can be used for air pressure type turning and rotation movement
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Called operation pressure (BAR) | Center Boa diameter (mm) | Clean room grade ISO 14644-1: 2015 | Connection hose diameter | End position damper | Fluid consumption (2X rating angle) (cm³) | Height Z (mm) | IP protection grade | Length x (mm) | Lowest operation pressure (BAR) | Maximum activation pressure (bar) | Maximum axis direction FZ (maximum) (n) | Maximum flow rate of feed through (at 6 bar) (L/min) | Maximum permissible inertia (kgm²) | Maximum pressure of fluid feeds -through (bar) | Maximum surrounding temperature (℃) | Minimum peripheral temperature (℃) | Number of fluid feed through | Number of intermediate positions | Repeated accuracy (°) | Rotation angle (°) | The smallest pressure (bar) in the fluid feed through | Torque (NM) | Torque MY Maximum (NM) | Torque center position (NM) | Version with media distributor | Weight (kg) | Width Y (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SRM 10-X-90-3 |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | External damper | 4.2 | 35.5 | 40 | 120 | 3 | 6.5 | 215 | - | 0.0014 | - | 60 | Five | - | none | 0.03 | 90 | - | 0.5 | 3 | - | - | 0.33 | 45 |
|
|
SRM 10-X-90-3-2P |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | External damper | 4.2 | - | 40 | - | 3 | 6.5 | 215 | 40 | 0.0014 | 8 | 60 | Five | 2 | none | 0.03 | 90 | -0.8 | 0.45 | 3 | - | can be | 0.36 | - |
|
|
SRM 10-X-180-3 |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | External damper | 7.2 | 35.5 | 40 | 120 | 3 | 6.5 | 215 | - | 0.0014 | - | 60 | Five | - | none | 0.03 | 180 | - | 0.5 | 3 | - | - | 0.33 | 45 |
|
|
SRM 10-X-180-3-2P |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | External damper | 7.2 | - | 40 | - | 3 | 6.5 | 215 | 40 | 0.0014 | 8 | 60 | Five | 2 | none | 0.03 | 180 | -0.8 | 0.45 | 3 | - | can be | 0.36 | - |
|
|
SRM 12-S-180-90 |
Available upon quote | 6 | 8 | Five | 3x1.8x0.6 | Hydraulic damper | 10.8 | 31 | 40 | 151 | 3 | 6.5 | 330 | - | 0.0025 | - | 60 | Five | - | none | 0.04 | 180 | - | 0.8 | Five | - | - | 0.416 | 41 |
|
|
SRM 10-H-180-90-M-2P |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | Hydraulic damper | 8.8 | - | 40 | - | 3 | 6.5 | 215 | 40 | 0.0008 | 8 | 60 | Five | 2 | 1XM (empty pressure type) | 0.03 | 180 | -0.8 | 0.45 | 3 | 0.25 | can be | 0.37 | - |
|
|
SRM 10-E-180-90 |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | Elastomer | 7.2 | twenty five | 40 | 114 | 4.5 | 6.5 | 215 | - | 0.0009 | - | 75 | Five | - | none | 0.06 | 180 | - | 0.5 | 3 | - | - | 0.252 | 36 |
|
|
SRM 10-E-180-90-2P |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | Elastomer | 7.2 | - | 40 | - | 4.5 | 6.5 | 215 | 40 | 0.0009 | 8 | 75 | Five | 2 | none | 0.06 | 180 | -0.8 | 0.45 | 3 | - | can be | 0.28 | - |
|
|
SRM 10-E-180-90-M |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | Elastomer | 8.8 | twenty five | 40 | 180 | 4.5 | 6.5 | 215 | - | 0.0009 | - | 75 | Five | - | 1XM (empty pressure type) | 0.06 | 180 | - | 0.5 | 3 | 0.3 | - | 0.33 | 36 |
|
|
SRM 10-E-180-90-M-2P |
Available upon quote | 6 | 6 | Five | 3x1.8x0.6 | Elastomer | 8.8 | - | 40 | - | 4.5 | 6.5 | 215 | 40 | 0.0009 | 8 | 75 | Five | 2 | 1XM (empty pressure type) | 0.06 | 180 | -0.8 | 0.45 | 3 | 0.25 | can be | 0.36 | - |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sunk Japan Co., Ltd.
View more products of Sunk Japan Co., Ltd.
About Company Handling This Product
- Japan
- Since 2009
- 35 employees