Scan -induced melee -induced proximity switch in the current state of automation components
Sunk Japan Co., Ltd.
About This Product
Scan the current state of the automation component using the induced proximity switch. Sunk has a model of IN and INK. The in model is directly attached to the plug or has a mold cable with a plug connector. The INK model is suitable for direct wiring. One side has an open -end mold cable.
Advantages and benefits
■ Installation by bracket
Easy and quick assembly
■ LED display specification
Directly control the switching position with a sensor
■ Standard plug connector specification
Extended cable can be quickly and simple replacement
■ Flexible cable in PUR version
Long life
■ Nearly switch for flash mount
Minimize the interference range in applications
Options, others
■ Function explanation
Using a built -in oscillator coil, the induced proximity switch generates a high -frequency police box magnetic field. This magnetic field occurs on the operating surface of the sensor. When a metal object enters the magnetic field, energy is taken in from the magnetic field and the amplitude is reduced. The sensor detects this change and the sensor is switched.
■ Type of signal output and switching
Depending on the size and structure of the sensor, the signal output is constantly closed, and the switching mode has PNP and NPN. Please feel free to contact us for support.
■ High protection grade
For plug -ins, for use in a protection grade IP67, a clean environment, dust and dirt environment, or contact with water. It is often possible to use it in a situation where there is contact with other media (coolant, acid, base, etc.), but chunks do not guarantee any.
* There are other part numbers.
-
Product
Scan -induced melee -induced proximity switch in the current state of automation components
-
Handling Company
Sunk Japan Co., Ltd.
10 Models of Scan -induced melee -induced proximity switch in the current state of automation components
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Cable connector/cable edge | Cable design (wire cross section/number of core lines) | Cable diameter D (mm) | Cable length L (cm) | Cable sheath material | Drilling emulsion resistance * | Housing material | Maximum operation voltage | Maximum surrounding temperature (℃) | Maximum switching current | Maximum switching frequency (Hz) | Measurement principle | Minimum peripheral temperature (℃) | Nominal voltage | Number of switching points | Opening and closing distance (mm) | Opening and closing function | Opening and closing type | Polar reversal prevention | Protection grade | Protection grade IP (sensor, connected state) | Sensor LED display | Short circuit prevention | Small bending radius (dynamic) (mm) | Small bending radius (static) (mm) | Switching hysteresis from nominal switching distance | The minimum operating voltage | Type with side cable outlet | Voltage drop (V) | Voltage type | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
In 5-S-M8 |
Available upon quote | M8 | - | 3.5 | 30 | PUR | - | Brass, nickel plating | 30 | 70 | 0.2 | 3,000 | Induced type | -twenty five | twenty four | - | 1 | Closer | PNP | can be | II | 67 | none | can be | 35 | 17.5 | <15% | Ten | - | 1.5 | DC | 0.014 |
|
|
In 5-S-M12 |
Available upon quote | M12 | - | 3.5 | 30 | PUR | - | Brass, nickel plating | 30 | 70 | 0.2 | 3,000 | Induced type | -twenty five | twenty four | - | 1 | Closer | PNP | can be | II | 67 | none | can be | 35 | 17.5 | <15% | Ten | - | 1.5 | DC | 0.021 |
|
|
In 8-S-M8 |
Available upon quote | M8 | - | 3.5 | 30 | PUR | - | PA 6, black | 36 | 70 | 0.2 | 1,000 | Induced type | -twenty five | twenty four | - | 1.5 | Closer | PNP | can be | II | 67 | none | can be | 35 | 17.5 | <10% | Ten | - | 1.5 | DC | 0.012 |
|
|
In 8-S-M12 |
Available upon quote | M12 | - | 3.5 | 30 | PUR | - | PA 6, black | 36 | 70 | 0.2 | 1,000 | Induced type | -twenty five | twenty four | - | 1.5 | Closer | PNP | can be | II | 67 | none | can be | 35 | 17.5 | <10% | Ten | - | 1.5 | DC | 0.019 |
|
|
In 30k-S-M8-PNP |
Available upon quote | M8 connector, 3 -pin | 3 x 0,055mm2 | 2.6 | 20 | PUR | - | Stainless steel | 30 | 70 | 0.1 | 8,000 | Induced type | -twenty five | twenty four | 1 | 0.9 | Closer | PNP | can be | III | 67 | can be | can be | 26 | 26 | - | Ten | - | 2 | DC | 0.08 |
|
|
INK 65-S |
Available upon quote | Lines than open | - | 3.5 | 200 | PUR | - | Stainless steel | 30 | 70 | 0.2 | 1,000 | Induced type | -twenty five | twenty four | - | 1.5 | Closer | PNP | can be | II | 67 | none | can be | 35 | 17.5 | <10% | Ten | - | 1.5 | DC | 0.052 |
|
|
INK 80-O |
Available upon quote | Lines than open | 3x 0.14mm2 | 3.3 | 200 | PUR | can be | Stainless steel | 30 | 70 | 0.2 | 3,000 | Induced type | -twenty five | twenty four | 1 | 1.5 | opener | PNP | can be | II | 67 | can be | can be | 33 | 16.5 | <10% | Ten | - | 1.5 | DC | 0.062 |
|
|
INK 80-S |
Available upon quote | Lines than open | 3x 0.14mm2 | 3.3 | 200 | PUR | can be | Stainless steel | 30 | 70 | 0.2 | 1,000 | Induced type | -twenty five | twenty four | 1 | 1.5 | Closer | PNP | can be | II | 67 | can be | can be | 33 | 16.5 | <10% | Ten | - | 1.5 | DC | 0.073 |
|
|
INK 80-SL |
Available upon quote | Lines than open | - | 3.5 | 300 | PUR | can be | Brass, nickel plating | 30 | 70 | 0.2 | 500 | Induced type | -twenty five | twenty four | - | 3 | Closer | PNP | can be | II | 67 | can be | can be | 35 | 17.5 | <10% | Ten | - | 1.5 | DC | 0.085 |
|
|
INK 80-S-SA |
Available upon quote | Lines than open | 3x 0.14mm2 | 3.3 | 200 | PUR | - | Stainless steel | 30 | 70 | 0.2 | 1,000 | Induced type | -twenty five | twenty four | 1 | 1.5 | Closer | PNP | can be | II | 67 | none | can be | 33 | 16.5 | <10% | Ten | can be | 1.5 | DC | 0.073 |
Click on the part number for more information about each product
Other products of Sunk Japan Co., Ltd.
View more products of Sunk Japan Co., Ltd.
About Company Handling This Product
- Japan
- Since 2009
- 35 employees