Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-MMS 22-PI1-S-M8-NPN
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Sunk Japan Co., Ltd.

Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1
Sunk Japan Co., Ltd.


About This Product

The magnetic switch is used for the status monitor of the automation component. Determine the approach of the magnet in a non -contact type and outputs a digital value when it exceeds the prescribed values. You can program this thrilling value. Advantages and benefits ■ There is no interference by individual switching points Since the entire magnet switch can be inserted, there is no interference range due to protruding sensor systems ■ Programable in a short time Due to the non -contact adjustment of the switching point and hysteresis ■ Adjustable hysterical Accurate position monitor is possible even with very low strokes ■ Suitable for narrow installation space Wired teaching by Teachtool plug ■ LED display specification Directly control the switching position with a sensor ■ Standard plug connector specification Extended cable can be quickly and simple replacement ■ Flexible cable in PUR version Long life ■ Installation in the sensor groove Space -saving and easy to assemble on the product Options, others ■ High protection grade For plug -ins, for use in a protection grade IP67, a clean environment, dust and dirt environment, or contact with water. It is often possible to use it in a situation where there is contact with other media (coolant, acid, base, etc.), but chunks do not guarantee any. ■ Power supply 10 ~ 30 V DC (with residual ripple <10%) ■ Causes of interference The sensor is affected by the nearby magnetic field. The source of the magnetic field that hinders is motor, electric welding machine, permanent magnet, wrench and chips (soft magnets). * There are other part numbers.

  • Product

    Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1




*Please note that we may not be able to accommodate sample requests.

10 Models of Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1

Items marked with have different values ​​depending on the model number.

Click on the part number for more information about each product

Product Image Part Number Price (excluding tax) Cable connector/cable edge Cable design (wire cross section/number of core lines) Cable diameter D (mm) Cable length L (cm) Cable sheath material Drilling emulsion resistance * Heavy duty type Housing material Maximum operation voltage Maximum surrounding temperature (℃) Maximum switching current Maximum switching frequency (Hz) Measurement principle Minimum peripheral temperature (℃) Nominal voltage Number of switching points Opening and closing function Opening and closing type Polar reversal prevention Protection grade Protection grade IP (sensor, connected state) Sensor LED display Short circuit prevention Small bending radius (dynamic) (mm) Small bending radius (static) (mm) Standard switching time (S) Teaching function The minimum operating voltage Type with side cable outlet Voltage drop (V) Voltage type weight
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMS 22-PI1-S-M8-NPN

MMS 22-PI1-S-M8-NPN

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR can be - PA 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 0.001 can be Ten - 1.5 DC 0.01
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMS 22-PI1-S-M8-NPN-HD

MMS 22-PI1-S-M8-NPN-HD

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR can be can be Stainless steel 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 0.001 can be Ten - 1.5 DC 0.01
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMS 22-PI1-S-M8-NPN-SA

MMS 22-PI1-S-M8-NPN-SA

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR - - PA 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 0.001 can be Ten can be 1.5 DC 0.01
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMS 22-PI1-S-M8-PNP

MMS 22-PI1-S-M8-PNP

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR can be - PA 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 0.001 can be Ten - 1.5 DC 0.01
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMS 22-PI1-S-M8-PNP-HD

MMS 22-PI1-S-M8-PNP-HD

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR can be can be Stainless steel 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 0.001 can be Ten - 1.5 DC 0.01
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMS 22-PI1-S-M8-PNP-SA

MMS 22-PI1-S-M8-PNP-SA

Available upon quote M8 connector, 3 -pin 3x0,05mm2 2.2 30 PUR - - PA 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 0.001 can be Ten can be 1.5 DC 0.01
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMSK 22-PI1-S-NPN

MMSK 22-PI1-S-NPN

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR can be - PA 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 0.001 can be Ten - 1.5 DC 0.02
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMSK 22-PI1-S-NPN-HD

MMSK 22-PI1-S-NPN-HD

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR can be can be Stainless steel 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 0.001 can be Ten - 1.5 DC 0.04
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMSK 22-PI1-S-NPN-SA

MMSK 22-PI1-S-NPN-SA

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR - - PA 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer Npn can be III 67 can be can be twenty two 11 0.001 can be Ten can be 1.5 DC 0.02
Detimination of magnets in non-contact type detection programmable magnet switch MMS 22-PI1-Part Number-MMSK 22-PI1-S-PNP

MMSK 22-PI1-S-PNP

Available upon quote Lines than open 3x0,05mm2 2.2 200 PUR can be - PA 30 80 0.05 1,000 Magnetism -20 twenty four 1 Closer PNP can be III 67 can be can be twenty two 11 0.001 can be Ten - 1.5 DC 0.02

Click on the part number for more information about each product

Customers who viewed this product also viewed

Other products of Sunk Japan Co., Ltd.


View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

  • Japan
  • Since 2009
  • 35 employees

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree