Analog position sensor APS-Z80 to detect the joe position of the gripper
Sunk Japan Co., Ltd.
About This Product
The analog sensor APS-Z80 is used to detect the Joe position of Sunk Gripper. This sensor detects the route drawn on the slope with a guided type and returns a continuous output signal.
Advantages and benefits
■ An analog multi -position monitor that can monitor any position
Improve adaptability with all automation solutions
■ Accurate measurement system
Stable parts handling with a compact machine
■ Compact design
Handling without interference and does not take up space
■ Built -in electronic device
Flexible cable assembly is possible, space -saving design
■ Standard plug connector specification
・ Simple replacement of the extended cable is possible
・ Highly flexible cable in PUR version
■ Long life
Options, others
■ Connector and cable end version
This sensor includes a type with a plug connector (30 -cm cable, M8 connector) and a non -2m cable, line than open).
■ Attachment kit
The APS system requires one attachment kit for each gripper. The appropriate attachment kit is described in the applicable item of the gripper catalog.
■ High protection grade
For plug -ins, for use in a protection grade IP67, a clean environment, dust and dirt environment, or contact with water. It is often possible to use it in a situation where there is contact with other media (coolant, acid, base, etc.), but chunks do not guarantee any.
■ Cable extension shield
When connecting an analog signal by cable extension, it is recommended to use a shield cable. The shield cable must be shielded at one end.
-
Product
Analog position sensor APS-Z80 to detect the joe position of the gripper
-
Handling Company
Sunk Japan Co., Ltd.
2 Models of Analog position sensor APS-Z80 to detect the joe position of the gripper
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Activation material | CE | Cable connector/cable edge | Cable diameter (mm) | Cable length (M) | Cable sheath material | Housing material | IP protection grade | Limit frequency (Hz) | Maximum measurement speed (M/S) | Maximum output voltage (v) | Maximum ripple ( %of UE) | Maximum surrounding temperature (℃) | Maximum voltage (V) | Measurement principle | Minimum load resistance RL (kΩ) | Minimum operating voltage (v) | Minimum output voltage (V) | Minimum peripheral temperature (℃) | Nominal voltage (V) | Number of switching points | Polar reversal prevention | Protection grade | Rated current (MA) | Repeated accuracy R of the maximum final value | Response time/type switching time (MS) | Sensor LED display | Short circuit prevention | Straight line (%) | Voltage output | Voltage type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
APS-Z80-K |
Available upon quote | PBT | can be | Lines than open | 3.1 | 3 | PUR | Steel, corrosion resistance | 67 | 1,000 | 20 | 9.5 | ± 15% | 70 | 30 | Induced type | 2 | 15 | 0.5 | -Ten | twenty four | analog | can be | 2 | 8 | ± 3% | 0.5 | none | can be | ± 5 | can be | DC |
|
|
APS-Z80-M8 |
Available upon quote | PBT | can be | M8 connector, 3 -pin | 3.1 | 0.3 | PUR | Steel, corrosion resistance | 67 | 1,000 | 20 | 9.5 | ± 15% | 70 | 30 | Induced type | 2 | 15 | 0.5 | -Ten | twenty four | analog | can be | 2 | 8 | ± 3% | 0.5 | none | can be | ± 5 | can be | DC |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sunk Japan Co., Ltd.
View more products of Sunk Japan Co., Ltd.
About Company Handling This Product
- Japan
- Since 2009
- 35 employees