Detect a magnet approach by non-contact type and send a continuous output signal MMS 22-A
Sunk Japan Co., Ltd.
About This Product
Advantages and benefits
■ C slot sensor
There is no interference range because it is inserted and used in the gripper.
■ Programable in a short time
With no contact magnetic teache tool
■ Stroke measurement range adjustable
Compatible with analog position monitor, long stroke
■ Built -in electronic device
Flexible cable assembly is possible, space -saving design
■ LED display specification
Check the switching status with the sensor directly
■ Standard plug connector specification
Extended cable can be quickly and simple replacement
■ Flexible cable in PUR version
Long life
Options, others
■ 5 V or 10 V output voltage
MMS 22-A has a 5 V and 10 V type with an output voltage. The 5 V sensor is optimized to use it in combination with the Sunk FPS system. On the other hand, 10 V sensors can be connected directly to analog input, such as PLC and another input card.
■ Causes of interference
The sensor is affected by the nearby magnetic field. The source of the magnetic field that hinders is motor, electric welding machine, permanent magnet, wrench and chips (soft magnets).
■ High protection grade
For plug -ins, for use in a protection grade IP67, a clean environment, dust and dirt environment, or contact with water. It is often possible to use it in a situation where there is contact with other media (coolant, acid, base, etc.), but chunks do not guarantee any.
■ Cable extension shield
When connecting an analog signal by cable extension, it is recommended to use a shield cable. The shield cable must be shielded at one end.
-
Product
Detect a magnet approach by non-contact type and send a continuous output signal MMS 22-A
-
Handling Company
Sunk Japan Co., Ltd.
3 Models of Detect a magnet approach by non-contact type and send a continuous output signal MMS 22-A
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | CE | Cable connector/cable edge | Cable diameter (mm) | Cable length (M) | Cable sheath material | Cable shield | Drilling emulsion resistance * | Housing material | Maximum output voltage (v) | Maximum ripple ( %of UE) | Maximum surrounding temperature (℃) | Maximum voltage (V) | Measurement principle | Minimum load resistance RL (kΩ) | Minimum operating voltage (v) | Minimum output voltage (V) | Minimum peripheral temperature (℃) | Nominal voltage (V) | Number of switching points | Polar reversal prevention | Protection grade | Rated current (MA) | Repeated accuracy R of the maximum final value | Response time/type switching time (MS) | Sensor LED display | Short circuit prevention | Straight line (%) | Teaching function | Voltage output | Voltage type | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MMS 22-A-05V-M08 |
Available upon quote | can be | M8 socket, 3 pins | 2.35 | 0.31 | PUR | can be | can be | GV-5H (PA), black | Five | <2 % vss | 55 | 5.5 | Magnetism | - | Five | 0 | Five | Five | analog | can be | 3 | Ten | <3 % | 50 | can be | can be | 15 | can be | can be | DC | 0.01 |
|
|
MMS 22-A-10V-M08 |
Available upon quote | can be | M8 connector, 3 -pin | 2.35 | 0.31 | PUR | - | can be | GV-5H (PA), black | Ten | <2 % vss | 55 | 30 | Magnetism | Ten | 15 | 0.3 | Five | twenty four | analog | can be | 3 | 15 | <3 % | 50 | can be | can be | 15 | can be | can be | DC | 0.01 |
|
|
MMS 22-A-10V-M12 |
Available upon quote | can be | M12 connector, 3 pins | 2.35 | 0.31 | PUR | can be | can be | GV-5H (PA), black | Ten | <2 % vss | 55 | 30 | Magnetism | Ten | 15 | 0.3 | Five | twenty four | analog | can be | 3 | 15 | <3 % | 50 | can be | can be | 15 | can be | can be | DC | 0.01 |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sunk Japan Co., Ltd.
View more products of Sunk Japan Co., Ltd.
About Company Handling This Product
- Japan
- Since 2009
- 35 employees