All Categories

History

Magnetic distortion type linear sensor GY series that measures straight line displacement [Flexible rod/resistant pressure (70MPa) rod] GysE-A-FX6 Prove-GySE-A-FX6 probe
Magnetic distortion type linear sensor GY series that measures straight line displacement [Flexible rod/resistant pressure (70MPa) rod] GysE-A-FX6 Prove-SANTEST CO., LTD

Magnetic distortion type linear sensor GY series that measures straight line displacement [Flexible rod/resistant pressure (70MPa) rod] GysE-A-FX6 Prove
SANTEST CO., LTD

SANTEST CO., LTD's Response Status

Response Rate

100.0%

Response Time

4.0hours

Very Fast Response


About This Product

Magnetic distortion -type linear sensor GY series [flexible rod] that measures straight displacement. Because it is not a normal rod type (SUS), it is possible to bend the rod part.

■ Magnetic distortion type displacement sensor "GY series"

This is an industrial displacement sensor that applies magnetic distortion phenomena due to the WIEDEMANN effect. A high -precision sensor of an absolute system that generates a "twist distortion" on the magnetic distortion line by a magnet that moves without contact along the sensation play, and can detect the location by measuring the propagation speed of the distortion.

■ GYSE-FX series uses PTFE with rod material instead of conventional stainless steel.

-Since the rod part is flexible, it can be used to detect a curved position (minimum bending radius of 200 mm). ・ Because the sensor uses the GYSE series, high -precision detection is possible. ・ The maximum stroke is 7500mm. -The optional device (with software) (model: GPM) allows you to adjust the zero/full scale point and change the output direction. The output can be selected from analog output (0-10V, 4-20mA), SSI output, A/B phase pulse, Profibusdp. ・ Like the GYSE (rod type) probe, the output can also be used for inclimental, SSI, proFIBUSDP, and controller. ・ CE marking ・ Noise cancellation ・ GPM setting

■ performance

・ Non -contact inspection: No mechanical wear for non -contact inspection ・ 2ch analog output: Position output (2 magnets) and speed output are possible ・ High -resolution ability: 16bit D/A installation (1/65,536) * Accuracy is applied to a sensor with an effective stroke of 300mm or more. A sensor of less than 300mm is equivalent to a 300mm sensor specification.

  • Product

    Magnetic distortion type linear sensor GY series that measures straight line displacement [Flexible rod/resistant pressure (70MPa) rod] GysE-A-FX6 Prove

Share this product


300+ people viewing

Last viewed: 7 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Magnetic distortion type linear sensor GY series that measures straight line displacement [Flexible rod/resistant pressure (70MPa) rod] GysE-A-FX6 Prove

Image Part Number Price (excluding tax) Linearness resolution Repetition Temperature characteristics Output format Position output (standard) Speed ​​output (optional) Alarm output Supply power supply Sampling frequency Operating temperature limit Save temperature range Vibration resistance Impact resistance Protection standard Optional Accessories
Magnetic distortion type linear sensor GY series that measures straight line displacement [Flexible rod/resistant pressure (70MPa) rod] GysE-A-FX6 Prove-Part Number-GySE-A-FX6 probe

GySE-A-FX6 probe

Available upon quote

± 0.025%FS or less Typ.

16bit (65,536)

± 0.001%FS or less

± 20ppmfs/℃ or less

Analog output

0 ~ 10V (load current MAX.5MA, load resistance min.2kΩ), or 4 ~ 20 mA (load resistance max.500Ω)

± 10V (load current MAX.5ma, load resistance min.2kΩ), or 4 ~ 20 mA (load resistance max.500Ω)

Open drain 50V 0.1a (when dropping magnet)

+24V (± 2) VDC (80mA)

Standard 1kHz (up to 1,300mm long rod)

0 ℃ ~+65 ℃

-20 ℃ ~+65 ℃

3G (or 40Hz 1MMPP)

10g (2msec)

IP67

GMP setting device

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Touch Probes Products

Other products of SANTEST CO., LTD

Reviews shown here are reviews of companies.


View more products of SANTEST CO., LTD

About Company Handling This Product

Response Rate

100.0%


Response Time

4.0hrs

Company Overview

SANTEST (STC) is a manufacturer of sensors, transducers, and other mechatronic products based in Osaka, Japan....

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree