All Categories
History
Product
Plug-in-type digital instruction ORP meter WIL-101-ORPHandling Company
Shinko Technos Co., Ltd.Usage Scenarios
Environment & Recycling Use / Pharmaceutical & Medical Use / Chemical Industry UseClick on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Range measurement | Repetition | Linearness | Input sampling cycle | Time accuracy | Moving average number | Adjust adjustment value range | Serial communication | Serial communication cable length | Serial communication communication line | Serial communication communication method | Serial communication communication speed | Serial communication synchronous method | Serial communication format | Serial communication and communication protocol | Serial communication data bit/Parity | Serial communication stop bit | Serial communication error correction | Serial communication error detection | Self -diagnostic function | input | Ambient temperature | Peripheral humidity | power supply | structure | Protective structure | Conformity standard | External dimensions | mass | Contact output (Options: EVT) 1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
WIL-101-ORP, EVT |
Available upon quote |
-1,999 ~ 1,999 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
-200 ~ 200 MV |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9,600, 19,200, 38,400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
ORP composite electrode sensor |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from the following. |
|
|
WIL-101-ORP, TA |
Available upon quote |
-1,999 ~ 1,999 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
-200 ~ 200 MV |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9,600, 19,200, 38,400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
ORP composite electrode sensor |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from the following. |
|
|
WIL-101-ORP1, EVT |
Available upon quote |
-1,999 ~ 1,999 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
-200 ~ 200 MV |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9,600, 19,200, 38,400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
ORP composite electrode sensor |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from the following. |
|
|
WIL-101-ORP1, TA |
Available upon quote |
-1,999 ~ 1,999 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
-200 ~ 200 MV |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9,600, 19,200, 38,400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
ORP composite electrode sensor |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ DIN rail mounting method |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W30XH88XD108mm (including socket) |
Approximately 200g (including socket) |
As a contact output, select by key operation from the following. |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
