Price (excluding tax)
・ Input number: 1 point ・ Input: ORP composite electrode sensor ・ Power supply voltage: 24 V AC/DC ・ Options: 2 points of contact output
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Adjust adjustment value range
Ambient temperature
Conformity standard
Contact output (Options: EVT) 1
External dimensions
Input sampling cycle
Linearness
Moving average number
Peripheral humidity
Protective structure
Range measurement
Repetition
Self -diagnostic function
Serial communication
Serial communication and communication protocol
Serial communication cable length
Serial communication communication line
Serial communication communication method
Serial communication communication speed
Serial communication data bit/Parity
Serial communication error correction
Serial communication error detection
Serial communication format
Serial communication stop bit
Serial communication synchronous method
Time accuracy
input
mass
power supply
structure
Part Number
WIL-101-ORP1, EVTHandling Company
Shinko Technos Co., Ltd.Items marked with have different values depending on the model number.
Product Image | Price (excluding tax) | Adjust adjustment value range | Ambient temperature | Conformity standard | Contact output (Options: EVT) 1 | External dimensions | Input sampling cycle | Linearness | Moving average number | Peripheral humidity | Protective structure | Range measurement | Repetition | Self -diagnostic function | Serial communication | Serial communication and communication protocol | Serial communication cable length | Serial communication communication line | Serial communication communication method | Serial communication communication speed | Serial communication data bit/Parity | Serial communication error correction | Serial communication error detection | Serial communication format | Serial communication stop bit | Serial communication synchronous method | Time accuracy | input | mass | power supply | structure |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Available upon quote | -200 ~ 200 MV | 0 to 50 ℃ | ROHS command support | As a contact output, select by key operation from the following. ・ No movement ・ ORP input limit operation ・ ORP input upper limited operation ・ Cleaning output ・ ORP fluctuation amount abnormal warning output ・ ORP input upper and lower limited operation | W30XH88XD108mm (including socket) | 125ms | Within ± 5 MV (for equivalent input) | 1 to 120 times | 35 ~ 85%RH (but not condensation) | Over-pressure category Ⅱ, pollution 2 (IEC61010-1) | -1,999 ~ 1,999 MV, decomposition ability: 1 MV | Within ± 5 MV (for equivalent input) | Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. | Perform the following operations from the external computer. ・ Read and set various set values ・ Read of ORP value and state ・ Change and adjust function ・ Reading and setting of user storage area | Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation | 1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) | EIA RS-485 compliant | Half double communication | Select 9,600, 19,200, 38,400 BPS by key operation | 8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation | Command resend | ・ Parity check, checksum (Shinko standard) ・ LRC (Modbus ASCII), CRC-16 (Modbus RTU) | ASCII, binary | Select 1 bit and 2 bits by key operation | Toning synchronization | Within ± 1%for the set time | ORP composite electrode sensor | Approximately 200g (including socket) | 24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC | ・ DIN rail mounting method ・ Case: flame -retardant resin color: Light gray ・ Panel: Membrane sheet |