Plug-in-type digital instruction PH meter WIL-102-PH
Shinko Technos Co., Ltd.

WIL-102-PH, EVT

・ PH value: 0.00 ~ 14.00 pH, decomposition ability: 0.01 pH
・ Temperature: 0.0 to 100.0 ° C, decomposition ability: 0.1 ℃

PH value: ± 0.05 pH

PH value: ± 0.05 pH

Temperature: ± 1 ℃

2 Automatic proofreading or manual proofreading
・ 2 points Automatic School Shoji: Automatic Power Director Stability Judgment, Type PH2, 4, 7, 9, 10 (JIS), the combination of standard solution, pH7 and others
・ Manual proofreading: Optional 2 pH or higher

Temperature school regular (1 point)

Perform the following operations from the external computer.
・ Read and set various set values
・ PH, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

Command resend

・ Parity check, checksum (Shinko standard)
・ LRC (Modbus ASCII), CRC-16 (Modbus RTU)

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element PT1000 or PT100) ・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element CU500/25)

0.0 to 100.0 ° C

0 to 50 ℃

35 ~ 85%RH (but not condensation)

100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC

・ DIN rail mounting method
・ Case: flame -retardant resin color: Light gray
・ Panel: Membrane sheet

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W30XH88XD108mm (including socket)

Approximately 200g (including socket)

As a contact output, select by key operation from among the following 1
・ No movement
・ PH input limit operation
・ PH input upper limited operation
・ Temperature input limit operation
・ Temperature input upper limited operation

WIL-102-PH, TA

・ PH value: 0.00 ~ 14.00 pH, decomposition ability: 0.01 pH
・ Temperature: 0.0 to 100.0 ° C, decomposition ability: 0.1 ℃

PH value: ± 0.05 pH

PH value: ± 0.05 pH

Temperature: ± 1 ℃

2 Automatic proofreading or manual proofreading
・ 2 points Automatic School Shoji: Automatic Power Director Stability Judgment, Type PH2, 4, 7, 9, 10 (JIS), the combination of standard solution, pH7 and others
・ Manual proofreading: Optional 2 pH or higher

Temperature school regular (1 point)

Perform the following operations from the external computer.
・ Read and set various set values
・ PH, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

Command resend

・ Parity check, checksum (Shinko standard)
・ LRC (Modbus ASCII), CRC-16 (Modbus RTU)

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element PT1000 or PT100) ・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element CU500/25)

0.0 to 100.0 ° C

0 to 50 ℃

35 ~ 85%RH (but not condensation)

100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC

・ DIN rail mounting method
・ Case: flame -retardant resin color: Light gray
・ Panel: Membrane sheet

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W30XH88XD108mm (including socket)

Approximately 200g (including socket)

As a contact output, select by key operation from among the following 1
・ No movement
・ PH input limit operation
・ PH input upper limited operation
・ Temperature input limit operation
・ Temperature input upper limited operation

WIL-102-PH, TA2

・ PH value: 0.00 ~ 14.00 pH, decomposition ability: 0.01 pH
・ Temperature: 0.0 to 100.0 ° C, decomposition ability: 0.1 ℃

PH value: ± 0.05 pH

PH value: ± 0.05 pH

Temperature: ± 1 ℃

2 Automatic proofreading or manual proofreading
・ 2 points Automatic School Shoji: Automatic Power Director Stability Judgment, Type PH2, 4, 7, 9, 10 (JIS), the combination of standard solution, pH7 and others
・ Manual proofreading: Optional 2 pH or higher

Temperature school regular (1 point)

Perform the following operations from the external computer.
・ Read and set various set values
・ PH, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

Command resend

・ Parity check, checksum (Shinko standard)
・ LRC (Modbus ASCII), CRC-16 (Modbus RTU)

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element PT1000 or PT100) ・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element CU500/25)

0.0 to 100.0 ° C

0 to 50 ℃

35 ~ 85%RH (but not condensation)

100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC

・ DIN rail mounting method
・ Case: flame -retardant resin color: Light gray
・ Panel: Membrane sheet

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W30XH88XD108mm (including socket)

Approximately 200g (including socket)

As a contact output, select by key operation from among the following 1
・ No movement
・ PH input limit operation
・ PH input upper limited operation
・ Temperature input limit operation
・ Temperature input upper limited operation

WIL-102-PH1, EVT

・ PH value: 0.00 ~ 14.00 pH, decomposition ability: 0.01 pH
・ Temperature: 0.0 to 100.0 ° C, decomposition ability: 0.1 ℃

PH value: ± 0.05 pH

PH value: ± 0.05 pH

Temperature: ± 1 ℃

2 Automatic proofreading or manual proofreading
・ 2 points Automatic School Shoji: Automatic Power Director Stability Judgment, Type PH2, 4, 7, 9, 10 (JIS), the combination of standard solution, pH7 and others
・ Manual proofreading: Optional 2 pH or higher

Temperature school regular (1 point)

Perform the following operations from the external computer.
・ Read and set various set values
・ PH, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

Command resend

・ Parity check, checksum (Shinko standard)
・ LRC (Modbus ASCII), CRC-16 (Modbus RTU)

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element PT1000 or PT100) ・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element CU500/25)

0.0 to 100.0 ° C

0 to 50 ℃

35 ~ 85%RH (but not condensation)

24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC

・ DIN rail mounting method
・ Case: flame -retardant resin color: Light gray
・ Panel: Membrane sheet

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W30XH88XD108mm (including socket)

Approximately 200g (including socket)

As a contact output, select by key operation from among the following 1
・ No movement
・ PH input limit operation
・ PH input upper limited operation
・ Temperature input limit operation
・ Temperature input upper limited operation

WIL-102-PH1, TA

・ PH value: 0.00 ~ 14.00 pH, decomposition ability: 0.01 pH
・ Temperature: 0.0 to 100.0 ° C, decomposition ability: 0.1 ℃

PH value: ± 0.05 pH

PH value: ± 0.05 pH

Temperature: ± 1 ℃

2 Automatic proofreading or manual proofreading
・ 2 points Automatic School Shoji: Automatic Power Director Stability Judgment, Type PH2, 4, 7, 9, 10 (JIS), the combination of standard solution, pH7 and others
・ Manual proofreading: Optional 2 pH or higher

Temperature school regular (1 point)

Perform the following operations from the external computer.
・ Read and set various set values
・ PH, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

Command resend

・ Parity check, checksum (Shinko standard)
・ LRC (Modbus ASCII), CRC-16 (Modbus RTU)

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element PT1000 or PT100) ・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element CU500/25)

0.0 to 100.0 ° C

0 to 50 ℃

35 ~ 85%RH (but not condensation)

24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC

・ DIN rail mounting method
・ Case: flame -retardant resin color: Light gray
・ Panel: Membrane sheet

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W30XH88XD108mm (including socket)

Approximately 200g (including socket)

As a contact output, select by key operation from among the following 1
・ No movement
・ PH input limit operation
・ PH input upper limited operation
・ Temperature input limit operation
・ Temperature input upper limited operation

WIL-102-PH1, TA2

・ PH value: 0.00 ~ 14.00 pH, decomposition ability: 0.01 pH
・ Temperature: 0.0 to 100.0 ° C, decomposition ability: 0.1 ℃

PH value: ± 0.05 pH

PH value: ± 0.05 pH

Temperature: ± 1 ℃

2 Automatic proofreading or manual proofreading
・ 2 points Automatic School Shoji: Automatic Power Director Stability Judgment, Type PH2, 4, 7, 9, 10 (JIS), the combination of standard solution, pH7 and others
・ Manual proofreading: Optional 2 pH or higher

Temperature school regular (1 point)

Perform the following operations from the external computer.
・ Read and set various set values
・ PH, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

Command resend

・ Parity check, checksum (Shinko standard)
・ LRC (Modbus ASCII), CRC-16 (Modbus RTU)

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element PT1000 or PT100) ・ PH composite electrode sensor (PH sensor JIS Z8802 compliant temperature element CU500/25)

0.0 to 100.0 ° C

0 to 50 ℃

35 ~ 85%RH (but not condensation)

24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC

・ DIN rail mounting method
・ Case: flame -retardant resin color: Light gray
・ Panel: Membrane sheet

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W30XH88XD108mm (including socket)

Approximately 200g (including socket)

As a contact output, select by key operation from among the following 1
・ No movement
・ PH input limit operation
・ PH input upper limited operation
・ Temperature input limit operation
・ Temperature input upper limited operation