Digital instructions dissolved oxygen Aer-102-DO
Shinko Technos Co., Ltd.

AER-102-DO, C5

Scenery: 0.00 ~ 20.00 mg/L, resolution ability: 0.01 mg/l

Scenery range: 0.0-200.0 %, decomposition ability: 0.1 %

Scenery: 0.0 ~ 150.0 kpa, resolution ability: 0.1 kpa

Scale range: 0.0 to 50.0 ° C, decomposition ability: 0.1 ℃

Rely on the accuracy of the fluorescent dissolved oxygen detector

Within ± 1%for the set time

5 seconds

・ Relay contact 1A
・ Control capacity: 3A 250V AC (resistance load), 1A 250V AC (induced load COSφ = 0.4)
・ Electrical life: 100,000 times
・ Control operation: P operation, ON/OFF operation

-Dissed oxygen concentration, water temperature, dissolved oxygen saturation rate, oxygen subdivision or MV is converted to analog amount for each data update cycle and output by current.

-The transmission output 1 (2) Maximum value and transmission output 1 (2) If the lower limit value is set to the same value, the transmission output 1 (2) is fixed to 4 ma DC.
・ The transmission output volume can be displayed.

・ Resolution: 12,000
・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω)
・ Output accuracy: Transmission output 1 (2) within ± 0.3%of span

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

0 to 50 ℃

35 ~ 85%RH (but not condensation)

100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC

・ Control board embedded method (compatible panel thickness 1 ~ 8mm)
・ Case: flame -retardant resin color: black
・ Panel: Membrane sheet
・ Drip -proof / dustproof structure: front IP66

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W48XH96XD110mm case depth: 98.5mm (at panel mount)

Approximately 280g

Perform the following operations from the external computer.
・ Read and set various set values
・ Dissolved oxygen concentration, dissolved oxygen saturation rate, oxygen pressure, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

AER-102-DO, EVT3

Scenery: 0.00 ~ 20.00 mg/L, resolution ability: 0.01 mg/l

Scenery range: 0.0-200.0 %, decomposition ability: 0.1 %

Scenery: 0.0 ~ 150.0 kpa, resolution ability: 0.1 kpa

Scale range: 0.0 to 50.0 ° C, decomposition ability: 0.1 ℃

Rely on the accuracy of the fluorescent dissolved oxygen detector

Within ± 1%for the set time

5 seconds

・ Relay contact 1A
・ Control capacity: 3A 250V AC (resistance load), 1A 250V AC (induced load COSφ = 0.4)
・ Electrical life: 100,000 times
・ Control operation: P operation, ON/OFF operation

-Dissed oxygen concentration, water temperature, dissolved oxygen saturation rate, oxygen subdivision or MV is converted to analog amount for each data update cycle and output by current.

-The transmission output 1 (2) Maximum value and transmission output 1 (2) If the lower limit value is set to the same value, the transmission output 1 (2) is fixed to 4 ma DC.
・ The transmission output volume can be displayed.

・ Resolution: 12,000
・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω)
・ Output accuracy: Transmission output 1 (2) within ± 0.3%of span

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

0 to 50 ℃

35 ~ 85%RH (but not condensation)

100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC

・ Control board embedded method (compatible panel thickness 1 ~ 8mm)
・ Case: flame -retardant resin color: black
・ Panel: Membrane sheet
・ Drip -proof / dustproof structure: front IP66

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W48XH96XD110mm case depth: 98.5mm (at panel mount)

Approximately 280g

Perform the following operations from the external computer.
・ Read and set various set values
・ Dissolved oxygen concentration, dissolved oxygen saturation rate, oxygen pressure, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

AER-102-DO1, C5

Scenery: 0.00 ~ 20.00 mg/L, resolution ability: 0.01 mg/l

Scenery range: 0.0-200.0 %, decomposition ability: 0.1 %

Scenery: 0.0 ~ 150.0 kpa, resolution ability: 0.1 kpa

Scale range: 0.0 to 50.0 ° C, decomposition ability: 0.1 ℃

Rely on the accuracy of the fluorescent dissolved oxygen detector

Within ± 1%for the set time

5 seconds

・ Relay contact 1A
・ Control capacity: 3A 250V AC (resistance load), 1A 250V AC (induced load COSφ = 0.4)
・ Electrical life: 100,000 times
・ Control operation: P operation, ON/OFF operation

-Dissed oxygen concentration, water temperature, dissolved oxygen saturation rate, oxygen subdivision or MV is converted to analog amount for each data update cycle and output by current.

-The transmission output 1 (2) Maximum value and transmission output 1 (2) If the lower limit value is set to the same value, the transmission output 1 (2) is fixed to 4 ma DC.
・ The transmission output volume can be displayed.

・ Resolution: 12,000
・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω)
・ Output accuracy: Transmission output 1 (2) within ± 0.3%of span

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

0 to 50 ℃

35 ~ 85%RH (but not condensation)

24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC

・ Control board embedded method (compatible panel thickness 1 ~ 8mm)
・ Case: flame -retardant resin color: black
・ Panel: Membrane sheet
・ Drip -proof / dustproof structure: front IP66

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W48XH96XD110mm case depth: 98.5mm (at panel mount)

Approximately 280g

Perform the following operations from the external computer.
・ Read and set various set values
・ Dissolved oxygen concentration, dissolved oxygen saturation rate, oxygen pressure, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation

AER-102-DO1, EVT3

Scenery: 0.00 ~ 20.00 mg/L, resolution ability: 0.01 mg/l

Scenery range: 0.0-200.0 %, decomposition ability: 0.1 %

Scenery: 0.0 ~ 150.0 kpa, resolution ability: 0.1 kpa

Scale range: 0.0 to 50.0 ° C, decomposition ability: 0.1 ℃

Rely on the accuracy of the fluorescent dissolved oxygen detector

Within ± 1%for the set time

5 seconds

・ Relay contact 1A
・ Control capacity: 3A 250V AC (resistance load), 1A 250V AC (induced load COSφ = 0.4)
・ Electrical life: 100,000 times
・ Control operation: P operation, ON/OFF operation

-Dissed oxygen concentration, water temperature, dissolved oxygen saturation rate, oxygen subdivision or MV is converted to analog amount for each data update cycle and output by current.

-The transmission output 1 (2) Maximum value and transmission output 1 (2) If the lower limit value is set to the same value, the transmission output 1 (2) is fixed to 4 ma DC.
・ The transmission output volume can be displayed.

・ Resolution: 12,000
・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω)
・ Output accuracy: Transmission output 1 (2) within ± 0.3%of span

Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality.

0 to 50 ℃

35 ~ 85%RH (but not condensation)

24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC

・ Control board embedded method (compatible panel thickness 1 ~ 8mm)
・ Case: flame -retardant resin color: black
・ Panel: Membrane sheet
・ Drip -proof / dustproof structure: front IP66

Over-pressure category Ⅱ, pollution 2 (IEC61010-1)

ROHS command support

W48XH96XD110mm case depth: 98.5mm (at panel mount)

Approximately 280g

Perform the following operations from the external computer.
・ Read and set various set values
・ Dissolved oxygen concentration, dissolved oxygen saturation rate, oxygen pressure, temperature, state reading
・ Change and adjust function
・ Reading and setting of user storage area

1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides)

EIA RS-485 compliant

Half double communication

Select 9,600, 19,200, 38,400 BPS by key operation

Toning synchronization

ASCII, binary

Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation

8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation

Select 1 bit and 2 bits by key operation