All Categories
History
Product
Digital instruction ORP meter Aer-101-OrpHandling Company
Shinko Technos Co., Ltd.Usage Scenarios
Pharmaceutical & Medical Use / Environment & Recycling Use / Chemical Industry UseClick on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Measurement range | Repetition | Linearness | Input sampling cycle | Time accuracy | Moving average number | Contact output | Transmission output 1 | Transmission output 2 | Self -diagnostic function | Ambient temperature | Peripheral humidity | power supply | structure | Protective structure | Conformity standard | External dimensions | mass | Serial communication (Options: C5) | Serial communication (option: C5) cable length | Serial communication (option: C5) communication line | Serial communication (Options: C5) Communication method | Serial communication (Options: C5) Communication speed | Serial communication (Options: C5) Sync | Serial communication (Options: C5) Certification format | Serial communication (Options: C5) Communication protocol | Serial Communication (Options: C5) Data Bit/Parity | Serial communication (Options: C5) Stop bit | Serial communication (Options: C5) error correction | Serial communication (option: C5) error detection |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Aer-101-Orp, C5 |
Available upon quote |
-2000 ~ 2000 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
・ Relay contact 1A |
ORP value or MV is converted to analog amount for each input sampling and output by current. If the transmission output maximum value and the lower limit of the transmission output are set to the same value, the transmission output is fixed to 4 ma DC. |
・ The transmission output volume can be displayed. |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
・ Control board embedded method (compatible panel thickness 1 ~ 8mm) |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W48XH96XD110mm case depth: 98.5mm (at panel mount) |
Approximately 280g |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
|
|
Aer-101-ORP, EVT3 |
Available upon quote |
-2000 ~ 2000 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
・ Relay contact 1A |
ORP value or MV is converted to analog amount for each input sampling and output by current. If the transmission output maximum value and the lower limit of the transmission output are set to the same value, the transmission output is fixed to 4 ma DC. |
・ The transmission output volume can be displayed.・ Dusive ability: 12000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: within ± 0.3%of transmission output span |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
100 ~ 240 V AC 50/60 Hz tolerance fluctuation range: 85 ~ 264 v AC |
・ Control board embedded method (compatible panel thickness 1 ~ 8mm) |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W48XH96XD110mm case depth: 98.5mm (at panel mount) |
Approximately 280g |
- | - | - | - | - | - | - | - | - | - | - | - |
|
|
AER-101-ORP1, C5 |
Available upon quote |
-2000 ~ 2000 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
・ Relay contact 1A |
ORP value or MV is converted to analog amount for each input sampling and output by current. If the transmission output maximum value and the lower limit of the transmission output are set to the same value, the transmission output is fixed to 4 ma DC. |
・ The transmission output volume can be displayed.・ Dusive ability: 12000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: within ± 0.3%of transmission output span |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ Control board embedded method (compatible panel thickness 1 ~ 8mm) |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W48XH96XD110mm case depth: 98.5mm (at panel mount) |
Approximately 280g |
Perform the following operations from the external computer. |
1.2 km (maximum) Cable resistance within 50Ω (end resistance: None or 120Ω or more on both sides) |
EIA RS-485 compliant |
Half double communication |
Select 9600, 19200, 38400 BPS by key operation |
Toning synchronization |
ASCII, binary |
Select Shinko Standard, Modbus ASCII, Modbus RTU by key operation |
8 bits/none, 7 -bit/none, 8 -bit/even number, 7 -bit/even number, 8 -bit/odd, 7 -bit/odd number by key operation |
Select 1 bit and 2 bits by key operation |
Command resend |
・ Parity check, checksum (Shinko standard) |
|
|
AER-101-ORP1, EVT3 |
Available upon quote |
-2000 ~ 2000 MV, decomposition ability: 1 MV |
Within ± 5 MV (for equivalent input) |
Within ± 5 MV (for equivalent input) |
125ms |
Within ± 1%for the set time |
1 to 120 times |
・ Relay contact 1A |
ORP value or MV is converted to analog amount for each input sampling and output by current. If the transmission output maximum value and the lower limit of the transmission output are set to the same value, the transmission output is fixed to 4 ma DC. |
・ The transmission output volume can be displayed.・ Dusive ability: 12000 ・ Current: 4 ~ 20mA DC (maximum load resistance 550Ω) ・ Output accuracy: within ± 0.3%of transmission output span |
Motor the CPU with a watchdog timer and make the instrument into an initial state in the event of an abnormality. |
0 to 50 ℃ |
35 ~ 85%RH (but not condensation) |
24 V AC/DC 50/60 Hz Available range range: 20-28 v AC/DC |
・ Control board embedded method (compatible panel thickness 1 ~ 8mm) |
Over-pressure category Ⅱ, pollution 2 (IEC61010-1) |
ROHS command support |
W48XH96XD110mm case depth: 98.5mm (at panel mount) |
Approximately 280g |
- | - | - | - | - | - | - | - | - | - | - | - |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
