Product
Distributor SBDHandling Company
Shinko Technos Co., Ltd.Items marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Adjustment | Ambient temperature | Available voltage range | Case | Instant power outage | Insulation resistance | Maximum load current | Mounting method | Output voltage | Peripheral humidity | Power-supply voltage | Response time | Ripple voltage | Select output status | Show 1 | Show 2 | Span adjustment range | Spring plug | Standard accuracy | Temperature coefficient | Tolerant resistance | Withstand voltage | Zero adjustment range | input | isolation | mass | output | panel | power consumption | self-diagnosis |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SBD-0101-0 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | -2.5 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 4 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0101-1 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | -2.5 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 4 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0102-0 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0102-1 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 600Ω or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 20mA DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0103-0 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 12ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0103-1 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 12ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0104-0 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 10ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0104-1 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 1kΩ or less | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC current: 0 ~ 10ma DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0105-0 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 85 ~ 264V AC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 100Ω or more | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC voltage: 0 ~ 1V DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities | |
SBD-0105-1 |
Available upon quote |
・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% |
-5 ~ 55 ℃ | 20-28V DC | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | 25ma DC | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 24V DC ± 3V (when loading current is 20 mA) | 35 ~ 85%RH (but not condensation) | 24V DC | 1 second (0 → 90%) (average 0.5 seconds) | Within 200mV DC (when loading current is 20 mA) |
・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse |
・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities |
・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less |
97.5 ~ 102.5% | Polyamide color green | Within ± 0.2% | ± 0.015%/℃ | 100Ω or more | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | DC current: 4 ~ 20mA DC, reception resistance: 50Ω built -in | 3-port insulation (between input-output-power supply) | Approximately 80g | DC voltage: 0 ~ 1V DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities |
Click on the part number for more information about each product